Syntheses of donor acceptor biobased photocurable water‐soluble resins based on poly‐l‐lysine

We report a new kind of coating using UV waterborne technique with a biobased poly(amino acid) resin. Firstly we performed the thermal polycondensation of l ‐lysine during 15 h at 150 °C to synthesize water‐soluble oligomers of poly‐l ‐lysine (PLL) with 5–6 monomer units. These oligomers were then transformed in mild conditions to give photocurable water‐soluble resins. We grafted on the poly‐l ‐lysine backbone, allyl and maleamic acid functional groups, with a grafting rate close to 65% thanks to allyl glycidyl ether and maleic anhydride respectively. The influence of the reaction time and the reagents ratio on the grafting rate was investigated. Hence, the donor/acceptor photopolymerization of the mixture of allyl ether‐poly‐l ‐lysine (PLL‐g‐AE) with maleamic acid‐poly‐l ‐lysine (PLL‐g‐MA) in aqueous solution gave yellow transparent films. The degree of conversion and other kinetic parameters have been studied and detailed. This work contributes to the development of materials based on renewable resources and cleaner processes. It opens a new pathway to both fundamental and applied‐driven research. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 955–963     

Synthesis of well‐defined chitosan‐based tricomponent copolymers for constructing multifunctional delivery systems

Chitosan‐based tricomponent copolymers, chitosan‐g‐poly(ε‐caprolactone)‐(g‐poly(oligo(ethylene glycol) methacrylate)) (CS‐PCL‐POEGMA, CPP), are synthesized as multifunctional nanocarriers for antitumor therapy. 2‐Bromoisobutyric acid and PCL are first site‐specifically conjugated onto the hydroxy groups of chitosan backbone through conventional coupling chemistry to give CS‐PCL‐Br using sodium dodecyl sulfate–chitosan complex as an organosoluble intermediate. CPP‐PCL‐Br is further used for initiating the single electron transfer‐living radical polymerization of OEGMA in the mixed solvent of dimethyl sulfoxide and lactic acid, yielding CPP. One‐pot reaction of CPP with a small amount of NaN₃ under the catalysis of Cu(I)Br/tris‐(2‐dimethylaminoethyl)amine converts the bromo ends of POEGMA grafts to azide functionality, which is used for conjugation of folic acid targeting moiety via azide–alkyne click reactions. The resultant tricomponent copolymers can assemble into spherical micelles with the capacity of coincorporating indocyanine green and Doxorubicin through electrostatic and hydrophobic interactions, respectively. The dual‐agent‐loaded micelles display a combined effect for combating HepG2 cells when irradiated with near‐infrared laser. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Star polymers by cross‐linking of linear poly(benzyl‐L‐glutamate) macromonomers via free‐radical and RAFT polymerization. A simple route toward peptide‐stabilized nanoparticles

Poly(benzyl‐L ‐glutamate) (PBLG) macromonomers were synthesized by N‐carboxyanhydride (NCA) polymerization initiated with 4‐vinyl benzylamine. MALDI‐ToF analysis confirmed the presence of styrenic end‐groups in the PBLG. Free‐radical and RAFT polymerization of the macromonomer in the presence of divinyl benzene produced star polymers of various molecular weights, polydispersity, and yield depending on the reaction conditions applied. The highest molecular weight (M_w) of 10,170,000 g/mol was obtained in a free‐radical multibatch approach. It was shown that the PBLG star polymers can be deprotected to obtain poly(glutamic acid) star polymers, which form water soluble pH responsive nanoparticles. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

A new oxidation state of aniline pentamer observed in water‐soluble electroactive oligoaniline‐chitosan polymer

A novel water‐soluble electroactive polymer, aniline pentamer crosslinked chitosan (Pentamer‐c‐Chi), was prepared by condensation polymerization of the terminal carboxyl groups in aniline pentamer with the amino side groups in chitosan in aqueous solution. The carboxyl groups were activated by N‐hydroxysuccinimide (NHS) and N,N′‐dicyclohexylcarbodiimide (DCC). The electrochemical behavior of anilinepentamer in this kind of crosslinked polymer was studied in acidic aqueous solution by means of cyclic voltammetry (CV), UV–vis, and electron spin resonance (ESR) spectroscopy. There were three reversible redox peaks in the CV of Pentamer‐c‐Chi. A new emeraldine oxidization state in the form of radical cations was proposed, which was associated with the new absorption band at 370 nm in the UV–vis spectra. The ESR of the aqueous solution of Pentamer‐c‐Chi showed a single Lorentzian shaped signal, which suggested the existence of radical cations. The new redox state was pH dependent and appeared only at pH < 3. The stability of radical cations could be attributed to the hydrogen bonds between radical cations, water, and chitosan. Morphological structure of the Pentamer‐c‐Chi can be adjusted by varying the content of aniline pentamer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1124–1135, 2008     

AGET ATRP of water‐soluble PEGMA: Fast living radical polymerization mediated by iron catalyst

In this work, living radical polymerizations of a water‐soluble monomer poly(ethylene glycol) monomethyl ether methacylate (PEGMA) in bulk with low‐toxic iron catalyst system, including iron chloride hexahydrate and triphenylphosphine, were carried out successfully. Effect of reaction temperature and catalyst concentration on the polymerization of PEGMA was investigated. The polymerization kinetics showed the features of “living”/controlled radical polymerization. For example, M_n,GPC values of the resultant polymers increased linearly with monomer conversion. A faster polymerization of PEGMA could be obtained in the presence of a reducing agent Fe(0) wire or ascorbic acid. In the case of Fe(0) wire as the reducing agent, a monomer conversion of 80% was obtained in 80 min of reaction time at 90 °C, yielding a water‐soluble poly(PEGMA) with M_n = 65,500 g mol^?1 and M_w/M_n = 1.39. The features of “living”/controlled radical polymerization of PEGMA were verified by analysis of chain‐end and chain‐extension experiments. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

SET‐LRP of N,N‐dimethylacrylamide and of N‐isopropylacrylamide at 25 °C in protic and in dipolar aprotic solvents

The single‐electron transfer living radical polymerization (SET‐LRP) of water‐soluble monomers, N,N‐dimethylacrylamide (DMA) and N‐isopropylacrylamide (NIPAM), initiated with 2‐methylchloropropionate (MCP) in dipolar aprotic and protic solvents is reported. The radical polymerization of acrylamides is characterized by higher rate constants of propagation and bimolecular termination than acrylates. Therefore, the addition of CuCl₂ is required to mediate deactivation in the early stages of the reaction. Through the use of Cu(0)‐wire/Me₆‐TREN catalysis, conditions were optimized to minimize the amount of externally added CuCl₂ required to maintain a linear evolution of molecular weight and narrow molecular weight distribution. By using less CuCl₂ additive, the amount of soluble copper species that must ultimately be removed from the reaction mixture is reduced. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1752–1763, 2010     

Ru(II)(tpy)2‐functionalized hydrogels: Synthesis,reversible responsiveness,and coupling with the belousov‐zhabotinsky reaction

This work aims at developing an approach to Ru(II)(Tpy)₂‐functionalized hydrogels and exploring the coupling of the hydrogels with the Belousov‐Zhabotinsky (BZ) reaction. Based on free radical polymerization, two synthetic routes are developed. The first one is the direct gelation by copolymerization of acrylamide as hydrophilic component and Ru(II)(Tpy)₂ as the functional group. The second one is carried out through a combined approach. A terpyridine‐containing hydrogel is first prepared and then post‐functionalized by coordination between Ru(III)(Tpy)Cl₃ and terpyridine groups in the hydrogel network. Utilizing the synthetic hydrogels, the reversible redox responsiveness, the coupling with the BZ reaction, the occurrence and the self‐oscillating properties of the BZ reaction in the hydrogel networks are studied. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2214–2222     

Well‐defined succinylated chitosan‐O‐poly(oligo(ethylene glycol)methacrylate) for pH‐reversible shielding of cationic nanocarriers

A novel type of well‐defined graft copolymer, succinylated chitosan‐O‐poly(oligo(ethylene glycol)methacrylate) (SC‐POEGMA), was developed for pH‐reversible poly(ethylene glyocol) (PEG) shielding of cationic nanocarriers. Chitosan‐O‐POEGMA (CS‐POEGMA) was first synthesized via single electron transfer‐living radical polymerization of oligo(ethylene glyol) methacrylate (OEGMA) using O‐brominated chitosan (CS‐Br) as a macromolecular initiator and Cu(I)Br/1,1,4,7,10,10‐hexamethyltriethylenetetramine as a catalyst. The subsequent succinylation of the chitosan backbone gave the titled copolymers. The content of POEGMA in CS‐POEGMA could be widely modulated by varying the degree of bromination and feed ratio of OEGMA to CS‐Br, without compromising the amino density of chitosan backbone. The hierarchical assembly between SC‐POEGMA and trimethylated chitosan‐O‐poly(ε‐caprolactone) (TMC‐PCL) micelles was further studied. At pH 7.4, the stoichiometric interactions between SC and TMC segments to form polyampholyte–polyelectrolyte complexes led to the formation of PEG‐shielded micelles. The hierarchially assembled micelles could be disassembled into the pristine TMC‐PCL micelles, when the medium pH was below a certain pH (pH_φ). By varying the degree of succinylation of SC‐POEGMA, the pH_φ value could be facilely modulated from 6.5 to 3.5 to meet the needs for specific biomedical applications. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Water‐soluble polymers from acid‐functionalized norbornenes

Unprotected exo,exo‐5‐norbornene‐2,3‐dicarboxylic acid and exo,exo‐7‐oxa‐5‐norbornene‐2,3‐dicarboxylic acid were polymerized via ring‐opening metathesis polymerization. This reaction yielded polymers with molecular weights (M_n from GPC) ranging from 31 to 242 kg/mol and polydispersity indices between 1.05 and 1.12, using Grubbs' third generation catalyst. The water solubility as a function of pH value of the polymers was investigated by dynamic light scattering (DLS). DLS and acid‐base titration revealed that the oxanorbornene polymer was water soluble over a wider pH range than its norbornene analog. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1266–1273, 2009     

Polymerization of 1,3‐dienes with functional groups. II. Free‐radical polymerization of N‐(2‐methylene‐3‐butenoyl)piperidine

The free‐radical homopolymerization and copolymerization behavior of N‐(2‐methylene‐3‐butenoyl)piperidine was investigated. When the monomer was heated in bulk at 60 °C for 25 h without an initiator, about 30% of the monomer was consumed by the thermal polymerization and the Diels–Alder reaction. No such side reaction was observed when the polymerization was carried out in a benzene solution with 1 mol % 2,2′‐azobisisobutylonitrile (AIBN) as an initiator. The polymerization rate equation was found to be R_p ∝ [AIBN]^0.507[M]^1.04, and the overall activation energy of polymerization was calculated to be 89.5 kJ/mol. The microstructure of the resulting polymer was exclusively a 1,4‐structure that included both 1,4‐E and 1,4‐Z configurations. The copolymerizations of this monomer with styrene and/or chloroprene as comonomers were carried out in benzene solutions at 60 °C with AIBN as an initiator. In the copolymerization with styrene, the monomer reactivity ratios were r₁ = 6.10 and r₂ = 0.03, and the Q and e values were calculated to be 10.8 and 0.45, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1545–1552, 2003     

Effect of catalyst systems and reaction conditions on the synthesis of cellulose‐g‐PDMAam copolymers by controlled radical polymerization

Various copper‐based catalyst systems and reaction conditions were studied in the graft copolymerization of N,N‐dimethylacrylamide (DMAam) with a cellulose‐based macroinitiator by controlled radical polymerization. The cellulose macroinitiator with degree of substitution DS = 0.44 was synthesized from dissolving softwood pulp in a LiCl/DMAc solution. The graft copolymerizations of DMAam, using the cellulose macroinitiator and various copper‐based catalyst systems, were then carried out in DMSO solutions. The copolymerization kinetics was followed by ¹H NMR. Water‐soluble cellulose‐g‐PDMAam copolymers were comprehensively characterized by ATR‐FTIR and ¹H NMR spectroscopies and SEC analyses. DLS and steady‐shear viscosity measurements revealed that when the DP_graft of the cellulose‐g‐PDMAam copolymer is high enough, the copolymer forms a more compact structure in water. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and radical polymerization behavior of bifunctional vinyl monomer derived from N‐vinylacetamide and p‐chloromethylstyrene

The radical polymerization of N‐(p‐vinylbenzyl)‐N‐vinylacetamide ( 1 ) prepared by the reaction of N‐vinylacetamide with p‐chloromethylstyrene was carried out by using radical initiators such as AIBN or BPO in benzene, chlorobenzene, or bulk. As a result, poly 1 was successfully isolated by dialysis (yield, 10–36%). The crosslinking reaction of poly 1 was carried out at 60–100 °C for 8 h. By using a radical initiator such as AIBN or BPO (3 mol %), the crosslinking reaction proceeded (yield, 63–79%). Moreover, the crosslinking reaction of poly 1 proceeded at 100 °C without a radical initiator in 50% yield. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2714–2723, 2006     

Synthesis and characterization of chitosan‐modified polymethyl methacrylate latex particles

Stable chitosan‐modified polymethyl methacrylate (PMMA) latex particles were prepared by using 2,2′‐azobis(2‐amidinopropane) dihydrochloride (V‐50) as the cationic initiator. The polymerization rate (R_p) is controlled by the V‐50 concentration ([V‐50]) and R_p is less sensitive to the chitosan concentration ([C]) used in the synthesis work. The reaction system follows Smith–Ewart Case III kinetics due to the relatively large particles produced. The zeta potential data show that the isoelectric point (pI) of the latex particles is 10.7. The amounts of V‐50 (C_V‐50) and chitosan (C_c) ultimately incorporated into the particles correlate reasonably well with [V‐50] and [C], respectively. At pH 7, the quantity of the negatively charged bovine serum albumin (BSA, pI = 4.8) adsorbed on the positively charged chitosan‐free particles (Q) via the electrostatic interaction increases with increasing C_V‐50. However, Q is relatively insensitive to changes in C_c. This result implies that only the outermost region of the hairy chitosan‐modified particles is available for adsorption of the relatively large protein species. Colloidal stability shows a significant influence on the BSA adsorption process. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1489–1499, 1999     

Preparation and characterization of chitosan‐graft‐poly (ϵ‐caprolactone) with an organic catalyst

Chitosan‐graft‐poly(ϵ‐caprolactone) was prepared via the ring‐opening graft polymerization of ϵ‐caprolactone (CL) through chitosan with 4‐dimethylaminopyridine as a catalyst and water as a swelling agent. The graft content of PCL within the graft copolymer was adjusted by the feed ratio of CL to chitosan, and the highest grafting concentration of PCL was up to about 400%. Fourier transform infrared, ¹H NMR, and two‐dimensional heteronuclear single quantum coherence analyses indicated that the amino group (NH₂ CH‐2) of chitosan initiated the graft polymerization of CL through the backbone of chitosan, and the hydroxyl group (HO CH_2–6) of chitosan did not participate in initiating the graft polymerization. The percentage of amino groups initiating the graft polymerization decreased with an increasing molar ratio of CL to chitosan in the feed, and this was attributed to the fact that the graft polymerization system increasingly became heterogeneous with an increasing feed ratio of CL to chitosan. The physical properties of the graft copolymers were characterized by thermogravimetric analysis and wide‐angle X‐ray diffraction, respectively. These suggested that the introduction of PCL grafts through the chitosan backbone would to some extent destroy the crystalline structure of chitosan, and the PCL grafts existed in an amorphous structure. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5353–5361, 2006     

Synthesis of chitosan‐based thermo‐ and pH‐responsive porous nanoparticles by temperature‐dependent self‐assembly method and their application in drug release

In this research, thermo‐ and pH‐responsive chitosan‐based porous nanoparticles were prepared by the temperature‐dependent self assembly method. The chitosan‐graft‐poly(N‐isopropylacrylamide) (CS‐g‐PNIPAAm) copolymer solution was prepared through polymerization of N‐isopropylacrylamide (NIPAAm) monomer in the presence of chitosan (CS) solution using cerium ammounium nitrate as the initiator. Then, CS‐g‐PNIPAAm solution was diluted by deionized water and heated to 40 °C for CS‐g‐PNIPAAm self‐assembly. After that, CS‐g‐PNIPAAm assembled to form micelles in which shell layer was CS. Crosslinking agent was used to reinforce the micelle structure to form nanoparticle. The molar ratio of CS/NIPAAm in the feed mixture was changed to investigate its effect on structure, morphology, thermal‐ and pH‐responsive properties of the nanoparticles. TEM images showed that a porous structure of nanoparticles was developed. The synthesized nanoparticles carried positive charges on the surface and exhibited stimuli‐responsive properties, and their mean diameter thus could be manipulated by changing pH value and temperature of the environment. The nanoparticles showed a continuous release of the encapsulated doxycycline hyclate up to 10 days during an in‐vitro release experiment. These porous particles with environmentally sensitive properties are expected to be utilized in hydrophilic drug delivery system. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5126–5136, 2009     

Synthesis of highly water soluble C60 end‐capped vinyl ether oligomers with well‐defined structure

Highly water soluble [60]fullerene (C₆₀) end‐capped vinyl ether (VE) oligomers with well‐defined structure were synthesized by living cationic polymerization technique. The addition reaction between 1‐octynylfulleride anion and oligomeric cationic species of VEs with pendant acetoxyl or malonic ester functions afforded the precursor C₆₀ end‐capped oligomers. The living VE oligomers were prepared by living cationic polymerization of diethyl 2‐(vinyloxy)ethylmalonate (VOEM) and 2‐acetoxyethyl vinyl ether (AcOVE) by the CH₃CH(OR)Cl/ZnI₂ [R = CH₂CH₂OCOCH₃ and CH₂CH₂CH(COOEt)₂, respectively] initiating system. The precursors were obtained as dark brown gummy solid in 33 and 72% yield for AcOVE and VOEM, respectively. UV‐vis and ¹³C NMR spectroscopy indicated the formation of 1,2‐disubstituted dihydrofullerene derivatives. Hydrolysis of the precursors proceeded quantitatively to give the water‐soluble C₆₀ end‐capped oligomers having oligo(sodium 2‐vinyloxyethylmalonate) [oligo(VOEMNa)] and oligo(2‐hydroxyethyl vinyl ether) [oligo(HOVE)] moieties. Solubility measurements revealed the water‐soluble C₆₀ end‐capped oligomer with oligo(VOEMNa) chain to have the excellent aqueous solubility compared to that of the water‐soluble C₆₀ derivatives thus far known; the maximum solubility in water is 96.6 mg/mL, which corresponds to 25.9 mg/mL of the C₆₀ moiety. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3578–3585, 2000     

Synthesis of statistical glycidyl methacrylate‐n‐vinyl pyrrolidone copolymers and their reaction with naproxen

Free‐radical copolymerization of glycidyl methacrylate (GMA) with N‐vinylpyrrolidone (VPD) was carried out at 50 °C using 3.0 mol · L^?1 of N,N′‐dimethylformamide solution and 9.0 · 10^?3 mol · L^?1 of 2,2′‐azobisisobutyronitrile as an initiator. The modification reaction of GMA‐VPD copolymers with a model bioactive carboxylic acid, 6‐methoxy‐α‐methyl‐2‐naphthaleneacetic acid (naproxen), was studied in the homogeneous phase using basic catalysts. The influence of the type of catalyst and the GMA content was evaluated. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1192–1199, 2002     

Synthesis of SET–LRP‐induced galactoglucomannan‐diblock copolymers

Polysaccharides are biorenewable and biodegradable starting materials for the development of functional materials. The synthesis of a monofunctional macroinitiator for single electron transfer‐living radical polymerization was successfully developed from a wood polysaccharide‐O‐acetyl galactoglucomannan (GGM) using a beforehand synthesized amino‐functional α‐bromoisobutyryl derivative applying reductive amination. The GGM macroinitiator was employed to initiate a controlled radical polymerization of [2‐(methacryloyloxy)ethyl]trimethylammonium chloride (MeDMA), methyl methacrylate (MMA), and N‐isopropylacrylamide (NIPAM) using Cu⁰/Me₆‐Tren as a catalyst. The either charged or amphiphilic GGM‐b‐copolymers with different chain lengths of the synthetic block were successfully synthesized without prior hydrophobization of the GGM chain and dimethyl sulfoxide (DMSO) or DMSO/water mixtures were used as solvents. This novel synthetic approach may find untapped potentials particularly for the development of polysaccharide‐based amphiphilic additives for cosmetics or paints and for the design of novel temperature or pH responsive polymers with such potential applications as in drug delivery systems or in biocomposites. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5100–5110     

Heterogeneous polycondensation for composition control of poly(p‐mercaptobenzoyl‐co‐p‐benzamide) by shearing

Composition control of aromatic poly(thioester‐amide) was examined by the reaction‐induced phase separation during polymerization of S‐acetyl‐4‐mercaptobenzoic acid (AMBA) and p‐acetylaminobenzoic acid (AABA) in aromatic solvent. The poly(thioester‐amide)s were obtained as precipitates and their yields became lower at the middle range of the content of AMBA in feed (χ_f). The contents of p‐mercaptobenzoyl (MB) moiety (χ_p) in the precipitates prepared without shearing were in good agreement with the χ_f values. In contrast to this, the χ_p values of the precipitates prepared at χ_f of 50–70 mol % under shearing were much lower than the χ_f values. The reaction rate of AMBA increased with shearing, whereas that of AABA was unchanged by shearing. This shearing effect on the reaction rates accelerated to form the homo‐oligomers. The solubility of MB oligomers enhanced by shearing, whereas that of p‐benzamide oligomers did not enhance owing to the strong interaction through hydrogen bonding. The MB oligomers were inhibited to be precipitated, resulting in the lower χ_p values than the χ_f values. The composition could be controlled by the application of the shearing to the heterogeneous polymerization. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4301–4308     

An experimental study on the kinetics and mechanisms of styrene polymerization in oil‐in‐water microemulsion initiated by oil‐soluble initiators

In order to clarify the kinetic role of oil‐soluble initiators in microemulsion polymerization, the oil‐in‐water (O/W) microemulsion polymerizations of styrene are carried out using four kinds of azo‐type oil‐soluble initiators with widely different water‐solubility. The results are compared with those observed when a water‐soluble initiator, potassium persulfate (KPS) is used. For all the oil‐soluble initiators used, the molecular weight of polymers and the average size of polymer particles do not change with the monomer conversion and the initial initiator concentration. The monomer conversion is expressed as a function of r_i^0.5t, where r_i is the rate of radical generation in the whole reaction system and t is the reaction time. These characteristics are quite the same as those observed when KPS is used as an initiator. When the polymerizations are carried out with the rate of radical generation in the whole reaction system fixed at the same value, the rates of polymerization are almost the same for all the oil‐soluble initiators employed, irrespective of their water‐solubility, but are significantly lower (ca. 1/3) than that with KPS. Then, the following conclusions are given: (1) The radicals generated not only in the aqueous phase, but also in the micelle and polymer particle phase are almost equally effective for the polymerization. However, (2) only a small portion (ca. 1/9) of the radicals generated in both phases participate in the polymerization. (3) Bimolecular termination of a growing radical in the polymer particle with an entering radical and with a pair of radicals generated in the polymer particles is negligible, and hence, the molecular weight of polymers is determined only by chain transfer to monomer.