Homo‐Diels–Alder reaction of a very inactive diene,bicyclo[2,2,1]hepta‐2,5‐diene,with the most active dienophile, 4‐phenyl‐1,2,4‐triazolin‐3,5‐dione. Solvent,temperature, and high pressure influence on the reaction rate

Solvent, temperature, and high pressure influence on the rate constant of homo‐Diels–Alder cycloaddition reactions of the very active hetero‐dienophile, 4‐phenyl‐1,2,4‐triazolin‐3,5‐dione (1), with the very inactive unconjugated diene, bicyclo[2,2,1]hepta‐2,5‐diene (2), and of 1 with some substituted anthracenes have been studied. The rate constants change amounts to about seven orders of magnitude: from 3.95^.10^?3 for reaction (1+2) to 12200 L mol^?1 s^?1 for reaction of 1 with 9,10‐dimethylanthracene (4e) in toluene solution at 298 K. A comparison of the reactivity (ln k₂) and the heat of reactions (?_r‐nH) of maleic anhydride, tetracyanoethylene and of 1 with several dienes has been performed. The heat of reaction (1+2) is ?218 ± 2 kJ mol^?1, of 1 with 9,10‐dimethylanthracene ?117.8 ± 0.7 kJ mol^?1, and of 1 with 9,10‐dimethoxyanthracene ?91.6 ±0.2 kJ mol^?1. From these data, it follows that the exothermicity of reaction (1+2) is higher than that with 1,3‐butadiene. However, the heat of reaction of 9,10‐dimethylanthracene with 1 (?117.8 kJ mol^?1) is nearly the same as that found for the reaction with the structural C=C counterpart, N‐phenylmaleimide (?117.0 kJ mol^?1). Since the energy of the N=N bond is considerably lower (418 kJ/bond) than that of the C=C bond (611 kJ/bond), it was proposed that this difference in the bond energy can generate a lower barrier of activation in the Diels–Alder cycloaddition reaction with 1. Linear correlation (R = 0.94) of the solvent effect on the rate constants of reaction (1+2) and on the heat of solution of 1 has been observed. The ratio of the volume of activation (?V^≠) and the volume of reaction (?V_r‐n) of the homo‐Diels–Alder reaction (1+2) is considered as “normal”: ?V^≠/?V_r‐n = ?25.1/?30.95 = 0.81. Copyright © 2012 John Wiley & Sons, Ltd.     

Enthalpies of formation and isomerization of cis‐ and trans‐decalin,and their oxa‐analogs by G3(MP2)//B3LYP calculations

G3(MP2)//B3LYP calculations have been carried out on trans‐ and cis‐decalin, and their mono‐, di‐, tri‐, and tetraoxa‐analogs. The main purpose of the work was to obtain enthalpies of formation for these compounds, and to study the relative stabilities of the cis–trans and positional isomers of the various (poly)oxadecalins. Comparison of the computational enthalpies of formation with the respective experimental ones, known only for the decalins and 1,3,5,7‐tetraoxadecalins, shows that in both cases the computational values are more negative than the experimental ones, the deviations being ?5 to ?7 kJ mol^?1 for the decalins and ?12 to ?17 kJ mol^?1 for the 1,3,5,7‐tetraoxadecalins. The respective computational enthalpies of cis–trans isomerization, however, are in excellent to satisfactory agreement with the experimental data. The cis–trans enthalpy differences vary from +11.0 kJ mol^?1 for decalin to ?15.4 kJ mol^?1 for 1,4,5,8‐tetraoxadecalin. Low relative enthalpy values were also calculated for the cis isomers of 1,8‐dioxadecalin (?3.7 kJ mol^?1), 1,3,6‐trioxadecalin (?4.6 kJ mol^?1), 1,3,8‐trioxadecalin (?9.7 kJ mol^?1), 1,4,5‐ trioxadecalin (?5.6 kJ mol^?1), 1,3,5,8‐tetraoxadecalin (?7.3 kJ mol^?1), and 1,3,6,8‐tetraoxadecalin (?14.5 kJ mol^?1). Copyright © 2009 John Wiley & Sons, Ltd.     

Radical chemistry of glucosamine naphthalene acetic acid and naphthalene acetic acid: a pulse radiolysis study

Free radical‐induced oxidation reactions of glucosamine naphthalene acetic acid (GNaa) and naphthalene acetic acid (Naa) have been studied using pulse radiolysis. GNaa was synthesized by covalently attaching Naa on glucosamine. Hydroxyl adduct (from the reaction of hydroxyl radicals (^●OH) at the naphthalene ring) was identified as the major transient intermediate (suggesting that the ^●OH reaction is on the naphthalene ring) and is characterized by its absorption maxima of 340 and 400 nm. Both GNaa and Naa undergo similar reaction pattern. The bimolecular rate constants determined for the reactions are 4.8 × 10⁹ and 8.9 × 10⁹ dm³ mol^?1 s^?1 for GNaa and Naa respectively. The mechanism of reaction of ^●OH with GNaa was further confirmed using steady‐state method. Radical cation of GNaa was detected as an intermediate during the reaction of sulfate radical (SO₄^●?) with GNaa (k₂ = 4.52 × 10⁹ dm³ mol^?1 s^?1). This radical cation transforms to a ^●OH adduct at higher pH. The radical cation of GNaa is comparatively long lived, and a cyclic transition state by neighboring group participation accounts for its stability. The oxy radical anion (O^●?) reacts with GNaa (k₂ = 1.12 × 10⁹ dm³ mol^?1 s^?1) mainly by one‐electron transfer mechanism. The reduction potential values of Naa and GNaa were determined using cyclic voltammetric technique, and these are 1.39 V versus NHE for Naa and 1.60 V versus NHE for GNaa. Copyright © 2014 John Wiley & Sons, Ltd.     

4‐Phenyl‐1,2,4‐triazoline‐3,5‐dione in the ene reactions with cyclohexene, 1‐hexene and 2,3‐dimethyl‐2‐butene. The heat of reaction and the influence of temperature and pressure on the reaction rate

The values of the enthalpy (53.3; 51.3; 20.0 kJ mol^?1), entropy (?106; ?122; ?144 J mol^?1K^?1), and volume of activation (?29.1; ?31.0; ?cm³ mol^?1), the reaction volume (?25.0; ?26.6; ?cm³ mol^?1) and reaction enthalpy (?155.9; ?158.2; ?150.2 kJ mol^?1) have been obtained for the first time for the ene reactions of 4‐phenyl‐1,2,4‐triazoline‐3,5‐dione 1 , with cyclohexene 4 , 1‐hexene 6 , and with 2,3‐dimethyl‐2‐butene 8 , respectively. The ratio of the values of the activation volume to the reaction volume (?V^≠_corr/ΔV_{r ? n}) in the ene reactions under study, 1 + 4 → 5 and 1 + 6 → 7 , appeared to be the same, namely 1.16. The large negative values of the entropy and the volume of activation of studied reactions 1 + 4 → 5 and 1 + 6 → 7 better correspond to the cyclic structure of the activated complex at the stage determining the reaction rate. The equilibrium constants of these ene reactions can be estimated as exceeding 10¹⁸ L mol^?1, and these reactions can be considered irreversible. Copyright © 2014 John Wiley & Sons, Ltd.     

Catalysis by hydrogen chloride in the gas‐phase elimination kinetics of 2‐phenyl‐2‐propanol and 3‐methyl‐1‐buten‐3‐ol

A homogeneous, molecular, gas‐phase elimination kinetics of 2‐phenyl‐2‐propanol and 3‐methyl‐1‐ buten‐3‐ol catalyzed by hydrogen chloride in the temperature range 325–386 °C and pressure range 34–149 torr are described. The rate coefficients are given by the following Arrhenius equations: for 2‐phenyl‐2‐propanol log k₁ (s^?1) = (11.01 ± 0.31) ? (109.5 ± 2.8) kJ mol^?1 (2.303 RT)^?1 and for 3‐methyl‐1‐buten‐3‐ol log k₁ (s^?1) = (11.50 ± 0.18) ? (116.5 ± 1.4) kJ mol^?1 (2.303 RT)^?1. Electron delocalization of the CH₂?CH and C₆H₅ appears to be an important effect in the rate enhancement of acid catalyzed tertiary alcohols in the gas phase. A concerted six‐member cyclic transition state type of mechanism appears to be, as described before, a rational interpretation for the dehydration process of these substrates. Copyright © 2007 John Wiley & Sons, Ltd.     

In situ monitoring of solid‐state transition of p‐aminobenzoic acid polymorphs using Raman spectroscopy

The purpose of this study is to investigate the mechanism of solid‐state polymorphic transition of p‐aminobenzoic acid (PABA) using in situ Raman spectroscopy measurement. The polymorphic transition experiments were conducted on a micro quartz vessel mounted on a microscope, hot and cold stage, under isothermal conditions. The temperature was precisely controlled by a standalone temperature controller equipped with liquid nitrogen cooling system. The Raman spectroscopy probe was positioned on the surface of the solid sample in the micro vessel. The polymorphic transition progression was in situ monitored and recorded by Raman spectroscopy. Based on the polymorphic transition rate resulted from the quantitative analysis of Raman spectra, the mechanism of solid‐state polymorphic transition of PABA was examined by various empirical kinetic models. An Arrhenius analysis was also performed to calculate activation energies from 134.7 kJ mol⁻¹ to 137.7 kJ mol⁻¹ for the transition. The results demonstrated that in situ Raman spectroscopy is a valuable and accurate technique to probe polymorphic transition process. Copyright © 2009 John Wiley & Sons, Ltd.     

Standard molar enthalpies of formation of dimethylbenzophenones

The standard (p⁰ = 0.1 MPa) molar enthalpy of formation of 3,4‐dimethylbenzophenone was derived from the standard molar energy of combustion, in oxygen, at T = 298.15 K, measured by static bomb combustion calorimetry. The Calvet high temperature vacuum sublimation technique was used to measure the enthalpy of sublimation of the compound. From these experimental parameters, the standard molar enthalpy of formation of 3,4‐dimethylbenzophenone, in the gaseous phase and at T = 298.15 K, was derived as ?(17.1 ± 2.9) kJ mol^?1. Density functional theory was used to investigate the gas‐phase molecular energetics of the 12 dimethylbenzophenones. Molecular geometries and vibrational frequencies were computed at the B3LYP/6‐31G(d) level of theory. The larger 6‐311+G(2d,2p) basis set was used to compute the energy of all dimethylbenzophenones and of the other compounds that were considered for the estimation of the standard molar enthalpies of formation at T = 298.15 K. The calculations show that the 2,2′‐ and 4,4′‐dimethylbenzophenones are the least and most stable isomers, respectively. Finally, the calculated enthalpy of formation of the benzophenone that was also studied experimentally, 3,4‐dimethylbenzophenone, is ?16.7 kJ mol^?1, which is in excellent agreement with the experimental result. Copyright © 2008 John Wiley & Sons, Ltd.     

Theoretical and experimental investigations on the structures of purified clay and acid-activated clay

The purified and acidified montmorillonite clay were characterized by XRD, BET and TPD. These results show that acidified clay is provided with more surface area and acid sites. For NH₃-TPD, molecular NH₃ desorption on purified clay and acidified clay occurs at temperatures with 873 and 1000 K, respectively. It is shown for the existence for strong acid sites. By two reactions of the tetrahydropyranylation of n-propanol and the esterification of cyclo-2-pentene with acetic acid, it is shown that the acidified clay displays better catalytic activity for above two organic reactions. By density-functional theory (DFT) method, we have analyzed the structures of different substituted montmorillonite and the effect sorption behavior of Na⁺ in different montmorillonite models. The result shows that the process of substitution will occur apart from octahedral aluminums. The adsorption of NH₃ on clay surfaces have been investigated using TPD and DFT. This is shown that acid sites locate at round the octahedral aluminums, and substitution of Al³⁺ for tetrahedral Si will be favorable to NH₃ adsorption.     

Time‐resolved resonance Raman and density functional theory study of the photochemistry of 4‐benzoylpyridine in acetonitrile and 2‐propanol

A nanosecond time‐resolved resonance Raman (ns‐TR³) spectroscopic investigation of the intermolecular hydrogen‐abstraction reaction of the triplet state of 4‐benzoylpyridine (4‐BPy) in 2‐propanol solvent is reported. The TR³ results reveal a rapid hydrogen abstraction (<10 ns) by the 4‐BPy triplet state (nπ*) with the 2‐propanol solvent, leading to formation of a 4‐BPy ketyl radical and an associated dimethyl ketyl radical partner from the solvent. The recombination of these two radical species occurs with a time constant about 200 ns to produce a para‐N‐LAT (light absorbing transient). The structure, major spectral features, and identification of the ketyl radical and the para‐N‐LAT coupling complex have been determined and confirmed by comparison of the TR³ results with results from density functional theory (DFT) calculations. A reaction pathway for the photolysis of 4‐BPy in 2‐propanol deduced from the TR³ results is also presented. The electron‐withdrawing effect of the heterocyclic nitrogen for 4‐BPy on the triplet state makes it have a significantly higher chemical reactivity for the hydrogen abstraction with 2‐propanol compared to the previously reported corresponding benzophenone triplet reaction under similar reaction conditions. In addition, the 4‐BPy ketyl radical reacts with the dimethyl ketyl radical to attach at the para‐N atom position of the pyridine ring to form a cross‐coupling product such as 2‐[4‐(hydroxy‐phenyl‐methylene)‐4h‐pyridin‐1‐yl]‐propan‐2‐ol instead of attacking at the para‐C atom position as was observed for the corresponding benzophenone reaction reported in an earlier study. Copyright © 2008 John Wiley & Sons, Ltd.     

Solvent,salt and high pressure effects on the rate and equilibrium constants for the formation of tri‐n‐butylphosphoniumdithiocarboxylate

Solvent, salt and high pressure effects on the rate and equilibrium constants for the formation of tri‐n‐butylphosphoniumdithiocarboxylate at 298.2 K are reported. This equilibrium is shifted to the phosphobetaine in polar solvents, salt solutions and under high external pressure. The reaction volume changes dramatically on going from less polar diethyl ether (?69 cm³ mol^?1) and tetrahydrofurane (THF) (?66 cm³ mol^?1), to more polar acetonitrile (?39 cm³ mol^?1) and acetone (?38 cm³ mol^?1). Copyright © 2010 John Wiley & Sons, Ltd.     

Infrared and Raman Spectra,conformations, ab initio calculations and spectral assignments of 1,3‐disilabutane (SiH3CH2SiH2CH3)

Raman spectra of 1,3‐disilabutane (SiH₃CH₂SiH₂CH₃) as a liquid were recorded at 293 K and as a solid at 78 K. In the Raman cryostat at 78 K an amorphous phase was first formed, giving a spectrum similar to that of the liquid. After annealing to 120 K, the sample crystallized and large changes occurred in the spectra since more than 20 bands present in the amorphous solid phase vanished. These spectral changes made it possible to assign Raman bands to the anti or gauche conformers with confidence. Additional Raman spectra were recorded of the liquid at 14 temperatures between 293 and 137 K. Some Raman bands changed their peak heights with temperature but were countered by changes in linewidths, and from three band pairs assigned to the anti and gauche conformers, the conformational enthalpy difference Δ_confH(gauche–anti) was found to be 0 ± 0.3 kJ mol⁻¹ in the liquid. Infrared spectra were obtained in the vapor and in the liquid phases at ambient temperature and in the solid phases at 78 K in the range 4000–400 cm⁻¹. The sample crystallized immediately when deposited on the CsI window at 78 K, and many bands present in the vapor and liquid disappeared. Additional infrared spectra in argon matrixes at 5 K were recorded before and after annealing to temperatures 20–34 K. Quantum chemical calculations were carried out at the HF, MP2 and B3LYP levels with a variety of basis sets. The HF and DFT calculations suggested the anti conformer as the more stable one by ca 1 kJ mol⁻¹, while the MP2 results favored gauche by up to 0.4 kJ mol⁻¹. The Complete Basis Set method CBS‐QB3 gave an energy difference of 0.1 kJ mol⁻¹, with anti as the more stable one. Scaled force fields from B3LYP/cc‐pVQZ calculations gave vibrational wavenumbers and band intensities for the two conformers. Copyright © 2007 John Wiley & Sons, Ltd.     

UV filter 2‐ethylhexyl 4‐methoxycinnamate: a structure,energetic and UV–vis spectral analysis based on density functional theory

2‐Ethylhexyl 4‐methoxycinnamate (EHMC) is a very commonly used UVB filter that is known to isomerize from the (E) to the (Z) isomer in the presence of light. In this study, we have performed high level quantum chemical calculations using density functional theory (DFT) with the B3LYP density functional and extended basis sets to study the gas‐phase molecular structure of EHMC and its energetic stability. Calculations were also performed for related smaller molecules cinnamic acid and 4‐methoxycinnamic acid. Charge delocalization has been analyzed using natural charges and Wiberg bond indexes within the natural bond orbital analysis and using nucleus independent chemical shifts. Density functional theory calculations reveal that the (E) isomer of EHMC is more stable than the (Z) by about 20 kJ mol^?1 in both the gas and aqueous phases. The enthalpy of formation in the gas phase of (E)‐EHMC was derived from an isodesmic bond separation reaction. Long‐range corrected DFT calculations in implicit water were made in order to understand the excited state properties of the (E) and (Z) isomers of EHMC. Copyright © 2013 John Wiley & Sons, Ltd.     

Adsorption and decomposition of formic acid on the NiO(111)-p(2 × 2) surface: TPD and steady state kinetics studies

The adsorption and decomposition of formic acid on NiO(111)-p(2 × 2) films grown on Ni(111) single crystal surface were studied by temperature-programmed desorption (TPD) spectroscopy. Exposure of formic acid at 163 K resulted in both molecular adsorption and dissociation to formate. The adsorbed formate underwent further dissociation to H₂, CO₂ and CO. H₂ and CO₂ desorbed at the same temperatures of 340, 390 and 520 K, while CO desorbed at 415 and 520 K. The desorption features varied with the formic acid exposure. Two reaction channels were identified for the decomposition of formate under equilibrium with gas-phase formic acid with a pressure of 2.5 × 10⁻⁴Pa, one preferentially producing H₂ and CO₂ with an activation energy of 22 ± 2 kJ mol⁻¹ and the other preferentially producing CO and H₂O with an activation energy of 16 ± 2 kJ mol⁻¹. The order of both reaction paths was 0.5 with respect to the pressure of formic acid.     

Kinetics of the gas‐phase homogeneous unimolecular elimination of selected ethyl esters of 2‐oxo‐carboxylic acids

The gas‐phase elimination kinetics of selected ethyl esters of 2‐oxo‐carboxylic acid have been studied over the temperature range of 270–415 °C and pressures of 37–114 Torr. The reactions are homogeneous, unimolecular, and follow a first‐order rate law in a seasoned static reaction vessel, with an added free radical suppressor toluene. The observed overall and partial rate coefficients are expressed by the following Arrhenius equations:

• Ethyl oxalyl chloride
• log k_overall (s^?1) = (13.22 ± 0.45) ? (179.4 ± 4.9) kJ mol^?1 (2.303 RT)^?1
• Ethyl piperidineglyoxylate
• log k_(CO2) (s^?1) = (12.00 ± 0.30) ? (191.2 ± 3.9) kJ mol^?1 (2.303 RT)^?1
• log k_(CO) (s^?1) = (12.60 ± 0.09) ? (210.7 ± 1.2) kJ mol^?1 (2.303 RT)^?1
• log k_t(overall) (s^?1) = (12.22 ± 0.26) ? (193.4 ± 3.4) kJ mol^?1 (2.303 RT)^?1
• Ethyl benzoyl formate
• log k_(CO2) (s^?1) = (12.89 ± 0.72) ? (203.8 ± 9.0) kJ mol^?1 (2.303 RT)^?1
• log k_(CO) (s^?1) = (13.39 ± 0.31) ? (213.3 ± 3.9) kJ mol^?1 (2.303 RT)^?1
• log k_t(overall) (s^?1) = (13.24 ± 0.60) ? (205.8 ± 7.6) kJ mol^?1 (2.303 RT)^?1

The kinetic and thermodynamic parameters of these reactions, together with those reported in the literature, lead to consider three different mechanistic pathways of elimination. Copyright © 2010 John Wiley & Sons, Ltd.     

Kinetics and mechanism of gas‐phase pyrolysis of ylides. Part 3.1 Thermal reactivity of α‐carbonyl‐ and thiocarbonyl‐stabilized methylenetriphenylphosphoranes

Fourteen ketone/thione‐stabilized triphenylphosphonium methylides were subjected to conventional gas‐phase and flash vacuum pyrolysis (FVP). The kinetics of the first‐order thermal gas‐phase reactions of all these compounds were investigated over 360–653 K temperature range. The values of the Arrhenius log A and energy of activation of these ylides averaged 11.52 ± 0.34 s^?1 and 133.20 ± 3.14 kJ mol^?1, respectively. The products of sealed‐tube (static) and FVP were analyzed and compared. A mechanism is proposed to account for the products of reaction. The rate constants [k (s^?1)] of the substrates at 500 K were calculated and used to substantiate the proposed mechanism of pyrolysis, and to rationalize the thermal gas‐phase reactivities of the ylides under study. Copyright © 2010 John Wiley & Sons, Ltd.     

The adsorption of acetic acid on Au/Pd(1 1 1) alloy surfaces

The adsorption of acetic acid is studied as a function of gold content by temperature-programmed desorption and reflection-absorption infrared spectroscopy on Au/Pd(1 1 1) alloys formed by depositing 5 ML of gold onto a Pd(1 1 1) surface and heating to various temperatures. For mole fractions of gold greater than ∼0.5, acetic acid adsorbs molecularly and desorbs intact with an activation energy of ∼52 kJ/mol. This acetic acid is present as catemers, where the nature of the catemer is found to depend on gold concentration. When the relative gold concentration is less than ∼0.33, adsorption of acetic acid at 80 K and heating to ∼207 K forms η¹-acetate species on the surface. On further heating, these can either thermally decompose to eventually evolve hydrogen, water and oxides of carbon, or form η²-acetate species, where the coverage of reactively formed η²-acetate species increases with decreasing gold concentration in the near surface region.     

Design and construction of a compact end-station at NSRRC for circular-dichroism spectra in the vacuum-ultraviolet region

A synchrotron‐radiation‐based circular‐dichroism end‐station has been implemented at beamline BL04B at the National Synchrotron Radiation Research Center (NSRRC) in Taiwan for biological research. The design and performance of this compact end‐station for measuring circular‐dichroism spectra in the vacuum‐ultraviolet region are described. The linearly polarized light from the beamline is converted to modulated circularly polarized light with a LiF photoelastic modulator to provide a usable wavelength region of 130–330 nm. The light spot at the sample position is 5 mm × 5 mm at a slit width of 300 µm and provides a flux greater than 1 × 10¹¹ photons s^?1 (0.1% bandwidth)^?1. A vacuum‐compatible cell made of two CaF₂ windows has a variable path length from 1.3 µm to 1 mm and a temperature range of 253–363 K. Measured CD spectra of (1S)‐(+)‐10‐camphorsulfonic acid and proteins demonstrated the ability of this system to extend the wavelength down to 172 nm in aqueous solution and 153 nm in hexafluoro‐2‐propanol.     

Density functional study of the chemisorption of O2 on the armchair surface of graphite

The reaction between O₂ and the armchair surface of a model graphite molecule has been studied using density functional calculations at the B3LYP/6-31G(d) level of theory. Both equilibrium and transition state geometries were optimized to provide a fundamental understanding of the energetics and kinetics of the chemisorption, desorption, rearrangement, and migration reactions that contribute to carbon gasification. A small barrier of 18 kJ mol⁻¹ was found for the chemisorption reaction, which is 578 kJ mol⁻¹ exothermic overall, producing a stable quinone. A number of reaction pathways with barriers below 578 kJ mol⁻¹ were characterized. Gasification of carbon occurs as CO, with barriers of 296 and 435 kJ mol⁻¹ for the first and second CO loss, respectively. The stable quinone can also undergo a rearrangement reaction to form two ketene groups, with a barrier of 260 kJ mol⁻¹. If the armchair edge is extended to include an adjacent aromatic ring, the oxide can migrate along the surface. This initially forms a furan-like bridge structure, with a barrier of just 89 kJ mol⁻¹. A further barrier of 383 kJ mol⁻¹ leads to CO desorption from the furan. The furan can also rearrange further with a barrier of 212 kJ mol⁻¹ to form a five-membered lactone, the most stable structure identified on the potential energy surface. Rearrangement and migration reactions, which have not generally been incorporated into carbon gasification models, are shown to be potentially important pathways in carbon oxidation reactions.     

A Spectral Study of the Interaction Between Chelerythrine Chloride and Adenosine

Abstract

The possible anticancer mechanisms of chelerythrine (CHE) and its interactions with adenosine were investigated by UV‐visible spectrophotometric and spectrofluorimetric measurements and by thermodynamic calculations. The binding of CHE to adenosine could be characterized by the hypochromic and bathochromic effects in the absorption bands and the quenching of fluorescence intensity. The spectral data were fitted by linear analysis, yielding a binding constant of 8.68×10⁴ L · mol^?1 at 25°C of CHE with adenosine, and a van't Hoff enthalpy of 92.8 kJ/mol for the endothermic interactions. In addition, with ΔG=?28.2 kJ/mol and ΔS=406 J/mol · K, the interactions should be entropy‐driven.     

A combined quantum mechanical and experimental approach towards chiral diketopiperazine hydroperoxides

In order to improve hydroperoxide formation from heterocyclic compounds relating to the formation rate and to allow a suitable choice of starting materials for autoxidation, theoretical studies on a set of different amino acid‐derived diketopiperazines and pyrazinoquinazolines were carried out. To estimate their reactivity towards hydroperoxide formation, bond dissociation enthalpies (BDEs) of tertiary α‐C? H bonds as well as reaction enthalpies to the corresponding hydroperoxides were calculated at the B3LYP/TZVP and RMP2/aug‐cc‐pVTZ level of theory. The Evans–Polanyi relation was then used to correlate substrate reactivity with calculated BDEs. Thermal and zero point vibrational energy (ZPE) corrections were determined in the classical harmonic oscillator‐rigid rotor‐particle in a box model. While for the investigated set of diketopiperazines BDEs of 318.8–327.0 kJ mol^?1 were found, BDEs for pyrazinoquinazolines spread between 248.4 and 368.4 kJ mol^?1 at the B3LYP/TZVP level of theory. A selected subset of heterocycles was converted to the corresponding hydroperoxides and the diketopiperazines were obtained in up to 39% yield after 5–7 days, whereas the pyrazinoquinazoline hydroperoxides were isolated in up to 67% yield after 24 h. Thus, replacing an amido moiety in an N‐aryl‐imino moiety when using pyrazinoquinazolines instead of diketopiperazines leads indeed to an improved captodative stabilization of the radical intermediate. Furthermore the theoretical calculations allowed a distinctive forecast of the preferred regioisomeric hydroperoxide. Copyright © 2010 John Wiley & Sons, Ltd.