Synthesis via ATRP,kinetics study and characterization (molecular‐morphological) of 3‐Arm star diblock copolymers of the (PS‐b‐P2VP)3 type

The synthesis of five homopolymers (PS)₃ and the corresponding diblock copolymer 3‐arm stars of the (PS‐b‐P2VP)₃ type is reported through atom transfer radical polymerization. Such star homo‐ and copolymers are prepared without any addition of solvent (bulk polymerization). The kinetics study results lead to the ability of predicting the best polymerization time with high values of monomer to polymer conversion, sufficient polydispersity indices and average molecular weights. Molecular characterization through size exclusion chromatography, viscometry, low‐angle laser light scattering, proton and carbon nuclear magnetic resonance spectroscopy (¹H NMR and ¹³C NMR, respectively) verified the successful synthesis of both homopolymer and copolymer 3‐arm star‐like architectures. Furthermore, the morphological characterization of the final copolymers is reported through transmission electron microscopy studies verifying the self‐assembly without any indication of homopolymer or Cu(I) traces. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 23–32     

Thiol‐epoxy polymerization via an AB monomer: Synthetic access to high molecular weight poly(β‐hydroxythio‐ether)s

A synthetic route is developed for the preparation of an AB‐type of monomer carrying an epoxy and a thiol group. Base‐catalyzed thiol‐epoxy polymerization of this monomer gave rise to poly(β‐hydroxythio‐ether)s. A systematic variation in the reaction conditions suggested that tetrabutyl ammonium fluoride, lithium hydroxide, and 1,8‐diazabicycloundecene (DBU) were good polymerization catalysts. Triethylamine, in contrast, required higher temperatures and excess amounts to yield polymers. THF and water could be used as polymerization mediums. However, the best results were obtained in bulk conditions. This required the use of a mechanical stirrer due to the high viscosity of the polymerization mixture. The polymers obtained from the AB monomer route exhibited significantly higher molecular weights (M_w = 47,700, M_n = 23,200 g/mol) than the materials prepared from an AA/BB type of the monomer system (M_w = 10,000, M_n = 5400 g/mol). The prepared reactive polymers could be transformed into a fluorescent or a cationic structure through postpolymerization modification of the reactive hydroxyl sites present along the polymer backbone. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2040–2046     

Hyperbranched Polyfluorinated benzyl ether polymers: Mechanism,kinetics, and optimization

Highly fluorinated, hyperbranched polymers were synthesized from the polycondensation of AB₂ monomers, 3,5‐bis[(pentafluorobenzyl)oxy]benzyl alcohol and 3,5‐bis[(pentafluorobenzyl)‐oxy]phenol with potassium carbonate base, and 18‐crown‐6 phase transfer agent in a variety of polar aprotic solvents. The regioselectivity of the polymerization was optimized and was found to be temperature dependent. The new polymerization technique produced higher molecular weight polymer using safer conditions than earlier methods. The resulting optimization was used to control substitution of oxygen‐bearing nucleophiles along nonactivated fluoroaryl systems in high yield. Water was found to induce side reactions that generate a highly conjugated fluoroaryl phenol with lowered reactivity. The removal of a methylene spacer in the polymer backbone of the hyperbranched polymer produced a polymer with greater thermal stability. The reaction conditions for polymerization were found to be general for nucleophile‐bearing perfluorinated systems. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 985–994     

Synthesis of degradable poly(methyl methacrylate) star polymers via RAFT copolymerization with cyclic ketene acetals

Copolymerization of the cyclic ketene acetal 5,6‐benzo‐2‐methylene‐1,3‐dioxepane (BMDO) with methyl methacrylate (MMA) is studied with respect to its copolymerization parameters and the suitability to control BMDO/MMA copolymerizations via the reversible addition‐fragmentation chain transfer (RAFT) technique to obtain linear and 4‐arm star polymers. BMDO shows disparate copolymerization behavior with MMA and r₁ = 0.33 ± 0.06 and r₂ = 6.0 ± 0.8 have been determined for polymerization at 110 °C in anisole from fitting copolymer composition vs. comonomer feed data to the Lewis–Mayo equation. Copolymerization of the two monomers is successful in RAFT polymerization employing a trithiocarbonate control agent. As desired, polymers contain only little amount of polyester units stemming from BMDO units and preliminary degradation experiment show that the polymer degrades slowly, but steadily in aqueous 1 M NaOH dispersion. Within ten days, the polymers are broken down to low molecular weight segments from an initial molecular weight of M_n = 6000 g mol^?1. Star (co)polymerization with an erythritol‐based tetra‐functional RAFT agent following the Z‐group approach proceeds efficiently and polymers with a number‐average molecular weight of 10,000 g mol^?1 are readily obtained that degrade in similar manner as the linear copolymer counterparts. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1633–1641     

Synthesis and photophysical properties of soluble low‐bandgap thienothiophene polymers with various alkyl side‐chain lengths

We report the facile synthesis and characterization of a class of thienothiophene polymers with various lengths of alkyl side chains. A series of 2‐alkylthieno[3,4‐b]thiophene monomers (Ttx) have been synthesized in a two‐step protocol in an overall yield of 28–37%. Poly(2‐alkylthieno[3,4‐b]thiophenes) (PTtx, alkyl: pentyl, hexyl, heptyl, octyl, and tridecyl) were synthesized by oxidative polymerization with FeCl₃ or via Grignard metathesis (GRIM) polymerization methods. The polymers are readily soluble in common organic solvents. The polymers synthesized by GRIM polymerization method (PTtx‐G) have narrower molecular weight distribution (?) with lower molecular weight (M_n) than those synthesized by oxidative polymerization (PTtx‐O). The band structures of the polymers with various lengths of alkyl side chains were investigated by UV–vis spectroscopy, cyclic voltammetry, and ultraviolet photoelectron spectroscopy. These low‐bandgap polymers are good candidates for organic transistors, organic light‐emitting diodes, and organic photovoltaic cells. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Direct transesterification of poly(methyl acrylate) for functional polyacrylate syntheses

Post‐polymerization modification is an important synthetic method to produce macromolecules with various chemical and physical properties. With this technique, functional groups of polymer molecules within the same structural scaffold can be varied, and thus, accurate research on structure‐property relationships is possible. To add practicality, the direct post‐polymerization of commodity polymers has been pursued, but only limited success has been realized. In this report, a study on various transesterification methods for the synthesis of functional polyacrylates beginning with a poly(methyl acrylate) (PMA), one common acrylate polymer, is presented. The Zn‐based catalytic system, a combination of Zn₄(OCOCF₃)₆O and 4‐dimethylaminopyridine with instant methanol removal, exhibited the highest reactivity among many catalysts and conditions. Assorted alcohols were reacted with PMA to produce the corresponding polyacrylates. This method was successfully extended to post‐polymerization modification of a PMA‐containing block copolymer, PS‐b‐PMA and synthesis of acrylate copolymers with functional group density control. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2554–2560     

Water‐soluble,biocompatible polyphosphazenes with controllable and pH‐promoted degradation behavior

The synthesis of a series of novel, water‐soluble poly(organophosphazenes) prepared via living cationic polymerization is presented. The degradation profiles of the polyphosphazenes prepared are analyzed by GPC, ³¹P NMR spectroscopy, and UV–Vis spectroscopy in aqueous media and show tunable degradation rates ranging from days to months, adjusted by subtle changes to the chemical structure of the polyphosphazene. Furthermore, it is observed that these polymers demonstrate a pH‐promoted hydrolytic degradation behavior, with a remarkably faster rate of degradation at lower pH values. These degradable, water soluble polymers with controlled molecular weights and structures could be of significant interest for use in aqueous biomedical applications, such as polymer therapeutics, in which biological clearance is a requirement and in this context cell viability tests are described which show the non‐toxic nature of the polymers as well as their degradation intermediates and products. © 2013 The Authors Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 287–294     

Preparation and characterization of solution processable phthalocyanine‐containing polymers via a combination of RAFT polymerization and post‐polymerization modification techniques

In this work, a benzenedinitrile functionalized monomer, 2‐methyl‐acrylic acid 6‐(3,4‐dicyano‐phenoxy)‐hexyl ester, was successfully polymerized via the reversible addition‐fragmentation chain transfer method. The polymerization behavior conveyed the characteristics of “living”/controlled radical polymerization: the first‐order kinetics, linear increase of number‐average molecular weight with monomer conversion, narrow molecular weight distribution, and successful chain‐extension experiment. The soluble Zn(II) phthalocyanine (Pc)‐containing (ZnPc) polymers were achieved by post‐polymerization modification of the obtained polymers. The Zn(II) phthalocyanine‐functionalized polymer was characterized by FTIR, UV–vis, fluorescence, atomic absorption spectroscopy, and thermogravimetric analysis. The potential application of above ZnPc‐functionalized polymer as electron donor material in bulk heterojunction organic solar cell was studied. The device with ITO/PEDOT:PSS/ZnPc‐Polymer/PC₆₁BM/LiF/Al structure provided a power conversion efficiency of 0.014%, fill factor of 0.24, open circuit voltage (V_oc) of 0.21 V, and short‐circuit current (J_sc) of 0.28 mA/cm². © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 691–698     

Polymerization of (E)‐1,3‐Pentadiene and (E)‐2‐methyl‐1,3‐pentadiene with neodymium catalysts: Examination of the factors that affect the stereoselectivity

(E)‐1,3‐Pentadiene (EP) and (E)‐2‐methyl‐1,3‐pentadiene (2MP) were polymerized to cis‐1,4 polymers with homogeneous and heterogeneous neodymium catalysts to examine the influence of the physical state of the catalyst on the polymerization stereoselectivity. Data on the polymerization of (E)‐1,3‐hexadiene (EH) are also reported. EP and EH gave cis‐1,4 isotactic polymers both with the homogeneous and with the heterogeneous system, whereas 2MP gave an isotactic cis‐1,4 polymer with the heterogeneous catalyst and a syndiotactic cis‐1,4 polymer, never reported earlier, with the homogeneous one. For comparison, the results obtained with the soluble CpTiCl₃‐based catalyst (Cp = cyclopentadienyl), which gives cis‐1,4 isotactic poly(2MP), are examined. A tentative interpretation is given for the mechanism of the formation of the stereoregular polymers obtained and a complete NMR characterization of the cis‐1,4‐syndiotactic poly(2MP) is reported. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3227–3232     

Radical polymerization of 2,5‐norbornadienes containing ester groups by AIBN and oxygen gas

New 2,5‐norbornadiene‐type monomers bearing 1‐adamantyl and cyclohexyl ester groups on their 2‐position polymerized with azobisisobutyronitrile to form the polymers consisting of two types of polymer unit structures. The major part had a saturated nortricyclene framework, which was formed by 2,6‐addition along with intramolecular cyclization on the norbornadiene moiety. The minor part consisted of 2‐norbornene‐type units constructed via 2,3‐addition. A series of norbornadiene‐based monomers spontaneously polymerized in the presence of oxygen. Because a radical inhibitor, namely hydroquinone, could suppress this spontaneous reaction, it was indicated that the oxygen‐induced polymerization proceeds via free‐radical polymerization mechanism. Changing a quantity of provided oxygen gas (O₂) to a norbornadiene monomer significantly affected on polymerization results, in specific, molecular weight of the formed polymer, which indicated that oxygen serves as one of the key reagents for the formation of free‐radical initiating species. It was proven that the combination of norbornadiene ethyl ester with O₂ was applicable as a new free‐radical initiator for polymerization of methyl methacrylate. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2528–2536     

Hydroxyfunctional oxetane‐inimers with varied polarity for the synthesis of hyperbranched polyether polyols via cationic ROP

Synthesis and characterization of novel hydroxyl‐functionalized oxetane‐inimers with varied alkyl chain length—3‐hydroxymethyl‐3‐methoxymethyloxetane, 3‐hydroxymethyl‐3‐propoxymethyloxetane, and 3‐hexoxymethyl‐3‐hydroxymethyloxetane—is reported. Cationic ring‐opening polymerization of these latent, cyclic AB₂‐monomers leads to hyperbranched (hb) polyether polyols with degrees of branching between 34 and 69%, confirmed by inverse‐gated (IG) ¹³C NMR spectroscopy. The hyperbranching polymerization yielded apparent molecular weights (M_n) ranging from 500 to 2500 g mol^?1 (size exclusion chromatography). Remarkably, by copolymerization of 1,1,1‐tris(4‐hydroxyphenyl)ethane as a “focal” unit, polymerization under slow monomer addition conditions lead to higher apparent molecular weights up to 11,220 g mol^?1. The end groups of the hb polymers were studied via matrix‐assisted laser desorption/ionization time of flight mass and NMR spectrometry. By varying the alkyl chain length, tailoring of the solubility and glass transition temperatures of the materials is possible. Potential applications range from macroinitiators with defined polarity to tailoring of surface properties of antifouling materials. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2850–2859     

Synthesis and characterization of organic/inorganic hybrid star polymers of 2,2,3,4,4,4‐hexafluorobutyl methacrylate and octa(aminophenyl)silsesquioxane nano‐cage made via atom transfer radical polymerization

Well‐defined organic/inorganic hybrid fluorinated star polymers were synthesized via atom transfer radical polymerization (ATRP) of 2,2,3,4,4,4‐hexafluorobutyl methacrylate (HFBMA) using octa(aminophenyl)silsesquioxane (OAPS) nano‐cage as initiator. For this purpose, OAPS was transformed into ATRP initiator by reacting with 2‐bromoisobutyrylbromide. ATR polymerization of HFBMA was carried out in trifluorotoluene at 75 °C using CuCl/2,2‐bipyridine or N,N,N′,N″,N″‐pentamethyldiethylenetriamine as catalyst system. GPC and ¹H NMR data confirmed the synthesis of OAPS/PHFBMA hybrid star polymer. Kinetics of the ATR polymerization of HFBMA using OAPS nano‐cage initiator was also investigated. The OAPS/PHFBMA hybrid stars were found to be molecularly dispersed in solution (THF); however, TEM micrographs revealed the formation of spherical particles of ～ 120–180 nm by the OAPS/PHFBMA hybrid star polymer after solvent evaporation. Thermal characterization of the nanocomposites by differential scanning calorimetry (DSC) revealed a slightly higher glass transition temperature (T_g) (when compared with the linear PHFBMA) of higher molecular weight OAPS/PHFBMA hybrid star polymers. In contrast, lower T_g than the linear PHFBMA was observed for OAPS/PHFBMA of relatively lower molecular weight (but higher than the linear PHFBMA). Thermal gravimetric analysis (TGA) showed a significant retardation (by ～60 °C) in thermal decomposition of nanocomposites when compared with the linear PHFBMA. Additionally, surface properties were evaluated by measuring the contact angles of water on polymer surfaces. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7287–7298, 2008     

Dendrimers as scaffolds for multifunctional reversible addition–fragmentation chain transfer agents: Syntheses and polymerization

The synthesis and characterization of novel first‐ and second‐generation true dendritic reversible addition–fragmentation chain transfer (RAFT) agents carrying 6 or 12 pendant 3‐benzylsulfanylthiocarbonylsulfanylpropionic acid RAFT end groups with Z‐group architecture based on 1,1,1‐hydroxyphenyl ethane and trimethylolpropane cores are described in detail. The multifunctional dendritic RAFT agents have been used to prepare star polymers of poly(butyl acrylate) (PBA) and polystyrene (PS) of narrow polydispersities (1.4 < polydispersity index < 1.1 for PBA and 1.5 < polydispersity index < 1.3 for PS) via bulk free‐radical polymerization at 60 °C. The novel dendrimer‐based multifunctional RAFT agents effect an efficient living polymerization process, as evidenced by the linear evolution of the number‐average molecular weight (M_n) with the monomer–polymer conversion, yielding star polymers with molecular weights of up to M_n = 160,000 g mol^?1 for PBA (based on a linear PBA calibration) and up to M_n = 70,000 g mol^?1 for PS (based on a linear PS calibration). A structural change in the chemical nature of the dendritic core (i.e., 1,1,1‐hydroxyphenyl ethane vs trimethylolpropane) has no influence on the observed molecular weight distributions. The star‐shaped structure of the generated polymers has been confirmed through the cleavage of the pendant arms off the core of the star‐shaped polymeric materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5877–5890, 2004     

Multiblock poly(4‐vinylpyridine) and its copolymer prepared with cyclic trithiocarbonate as a reversible addition–fragmentation transfer agent

The polymerization of 4‐vinylpyridine was conducted in the presence of a cyclic trithiocarbonate (4,7‐diphenyl‐[1,3]dithiepane‐2‐thione) as a reversible addition–fragmentation transfer (RAFT) polymerization agent, and a multiblock polymer with narrow‐polydispersity blocks was prepared. Two kinds of multiblock copolymers of styrene and 4‐vinylpyridine, that is, (ABA)_n multi‐triblock copolymers with polystyrene or poly(4‐vinylpyridine) as the outer blocks, were prepared with multiblock polystyrene or poly(4‐vinylpyridine) as a macro‐RAFT agent, respectively. GPC data for the original polymers and polymers cleaved by amine demonstrated the successful synthesis of amphiphilic multiblock copolymers of styrene and 4‐vinylpyridine via two‐step polymerization. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2617–2623, 2007     

Schiff base as a novel kind of catalyst for reversible complexation‐mediated radical polymerization of methyl methacrylate

Two kinds of Schiff base, N,N′‐dibenzylidene‐1,2‐diaminoethane (NDBE) and N,N′‐disalicylidene‐1,2‐diaminoethane, have been found as efficient organic catalyst for reversible complexation‐mediated radical polymerization (RCMP) of methyl methacrylate (MMA) for the first time. The polymerization results show obvious features of “living”/controlled radical polymerization. Well‐defined and low‐polydispersity polymers (M_w/M_n = 1.20–1.40) are obtained in RCMP of MMA catalyzed by Schiff base at mild temperature (65–80°C). Moreover, Schiff base also exhibits a particularly high reactivity for RCMP of MMA with in situ formed alkyl iodide initiator. The polymer molecular weight and its polydispersity (M_w/M_n is around 1.20) are well controlled even with high monomer conversion. Notably, when the dosage of azo initiator is same as the dosage of iodine, the polymerization could also be realized in the presence of NDBE. The living feature of synthesized polymer is confirmed through the chain extension experiment. In short, Schiff base is a kind of high‐efficient catalyst for RCMP and reverse RCMP of MMA, which can be one of the most powerful and robust techniques for polymer synthesis. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1653–1663     

A New Approach for the Synthesis of Miktoarm Star Polymers Through a Combination of Thiol–Epoxy “Click” Chemistry and ATRP/Ring‐Opening Polymerization Techniques

A new approach was developed for synthesis of certain A₃B₃‐type of double hydrophilic or amphiphilic miktoarm star polymers using a combination of “grafting onto” and “grafting from” methods. To achieve the synthesis of desired miktoarm star polymers, acetyl protected poly(ethylene glycol) (PEG) thiols (M_n = 550 and 2000 g mol^?1) were utilized to generate A₃‐type of homoarm star polymers through an in situ protective group removal and a subsequent thiol–epoxy “click” reaction with a tris‐epoxide core viz. 1,1,1‐tris(4‐hydroxyphenyl)ethane triglycidyl ether. The secondary hydroxyl groups generated adjacent to the core upon the thiol–epoxy reaction were esterified with α‐bromoisobutyryl bromide to install atom transfer radical polymerization (ATRP) initiating sites. ATRP of N‐isopropylacrylamide (NIPAM) using the three‐arm star PEG polymer fitted with ATRP initiating sites adjacent to the core afforded A₃B₃‐type of double hydrophilic (PEG)₃[poly(N‐isopropylacrylamide)] (PNIPAM)₃ miktoarm star polymers. Furthermore, the generated hydroxyl groups were directly used as initiator for ring‐opening polymerization of ε‐caprolactone to prepare A₃B₃‐type of amphiphilic (PEG)₃[poly(ε‐caprolactone)]₃ miktoarm star polymers. The double hydrophilic (PEG)₃(PNIPAM)₃ miktoarm star polymers showed lower critical solution temperature around 34 °C. The preliminary transmission electron microscopy analysis indicated formation of self‐assembly of (PEG)₃(PNIPAM)₃ miktoarm star polymer in aqueous solution. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 146–156     

End‐group functionalization and postpolymerization modification of helical poly(isocyanide)s

This contribution presents the synthesis of helical alkyne‐terminated polymers using a functionalized Nickel complex to initiate the polymerization of menthylphenyl isocyanides. The resulting polymers display low dispersities and controlled molecular weights. Copper‐catalyzed azide/alkyne cycloadditions (CuAAC) are performed to attach various azide‐containing compounds to the polymer termini. After azido‐phosphonate moiety attachment the polymer displays a signal at 25.4 ppm in the ³¹P NMR spectrum demonstrating successful end‐group functionalization. End‐group functionalization of a fluorescent dye allows to determine the functionalization yield as 89% (±8). Successful ligation of an azide‐functionalized peptide sequence (M_KLA = 1547 g/mol) increases the M_n from 5100 for the parent polymer to 6700 for the bioconjugate as visualized by GPC chromatography. Analysis by CD spectroscopy confirms that the helical conformation of the poly(isocyanide) block in the peptide–polymer conjugate is maintained after postpolymerization modification. These results demonstrate an easy, generalizable, and versatile strategy toward mono‐telechelic helical polymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2766–2773     

Molecular weight control of polyacrylamide with sodium formate as a chain‐transfer agent: Characterization via size exclusion chromatography/multi‐angle laser light scattering and determination of chain‐transfer constant

We discuss the synthesis and characterization of polyacrylamide (PAM) homopolymers with carefully controlled molecular weights (MWs). PAM was synthesized via free‐radical solution polymerization under conditions that yield highly linear polymer with minimal levels of hydrolysis. The MW of the PAM homopolymers was controlled by the addition of sodium formate (NaOOCH) to the polymerization medium as a conventional chain‐transfer agent. MWs and polydispersity indices (PDIs) were determined via size exclusion chromatography/multi‐angle laser light scattering analysis; for polymerizations carried out to high conversion, PAM MWs ranged from 0.23 to 6.19 × 10⁶ g/mol, with most samples having PDI ≈2.0. Zero‐shear intrinsic viscosities of the polymers were determined via low‐shear viscometry in 0.514 M NaCl at 25 °C. Data derived from the polymer characterization were used to determine the chain‐transfer constant to NaOOCH under the given polymerization conditions and to calculate Mark–Houwink–Sakurada K and a values for PAM in 0.514 M NaCl at 25 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 560–568, 2003     

Synthesis of ultra‐high molecular weight polymers by controlled production of initiating radicals

This study demonstrates that the gradual and slow production of initiating radicals (i.e., hydroxyl radicals here) is the key point for the synthesis of ultra‐high molecular weight (UHMW) polymers via controlled radical polymerization. Hydrogen peroxide (H₂O₂) and ferrous iron (Fe²⁺) react via Fenton redox chemistry to initiate RAFT polymerization. This work presents two enzymatic‐mediated (i.e., Bio‐Fenton‐RAFT and Semi Bio‐Fenton‐RAFT) and one syringe pump‐driven Fenton‐RAFT polymerization processes in which the initiating radicals are carefully and gradually dosed into the reaction solution. The “livingness” of the synthesized UHMW polymers is demonstrated by chain extension and aminolysis experiments. Zimm plots obtained from static light scattering (SLS) technique are used to characterize the UHMW polymers. This Fenton‐RAFT polymerization provides access to polymers of unprecedented UHMW (M_w ~ 20 × 10⁶ g mol^?1) with potential in diverse applications. The UHMW polymers made via the controlled Fenton‐RAFT polymerization by using a syringe pump shows that it is possible to produce such materials through an easy‐to‐set up and scalable process. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1922–1930     

Synthesis of AB3‐type miktoarm star polymers with steroid core via a combination of “Click” chemistry and ring opening polymerization techniques

Well‐defined AB₃‐type miktoarm star‐shaped polymers with cholic acid (CA) core were fabricated with a combination of “click” chemistry and ring opening polymerization (ROP) methods. Firstly, azide end‐functional poly(ethylene glycol) (mPEG), poly(methyl methacrylate) (PMMA), polystyrene (PS), and poly(ε‐caprolactone) (PCL) polymers were prepared via controlled polymerization and chemical modification methods. Then, CA moieties containing three OH groups were introduced to these polymers as the end groups via Cu(I)‐catalyzed click reaction between azide end‐functional groups of the polymers ( mPEG‐N₃ , PMMA‐N₃ , PS‐N₃ , and PCL‐N₃ ) and ethynyl‐functional CA under ambient conditions, yielding CA end‐functional polymers ( mPEG‐Cholic , PMMA‐Cholic , PS‐Cholic , and PCL‐Cholic ). Finally, the obtained CA end‐capped polymers were employed as the macroinitiators in the ROP of ε‐caprolactone (ε‐CL) yielding AB₃‐type miktoarm star polymers ( mPEG‐Cholic‐PCL₃ , PMMA‐Cholic‐PCL₃ , and PS‐Cholic‐PCL₃ ) and asymmetric star polymer [ Cholic‐(PCL)₄ ]. The chemical structures of the obtained intermediates and polymers were confirmed via Fourier transform infrared and ¹H nuclear magnetic resonance spectroscopic techniques. Thermal decomposition behaviors and phase transitions were studied in detail using thermogravimetric analysis and differential scanning calorimetry experiments. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3390–3399