Synthesis of block and end‐functionalized polyesters by triflimide‐catalyzed ring‐opening polymerization of ε‐caprolactone, 1,5‐dioxepan‐2‐one,and rac‐lactide

The ring‐opening polymerization (ROP) of cyclic esters, such as ε‐caprolactone, 1,5‐dioxepan‐2‐one, and racemic lactide using the combination of 3‐phenyl‐1‐propanol as the initiator and triflimide (HNTf₂) as the catalyst at room temperature with the [monomer]₀/[initiator]₀ ratio of 50/1 was investigated. The polymerizations homogeneously proceeded to afford poly(ε‐caprolactone) (PCL), poly(1,5‐dioxepan‐2‐one) (PDXO), and polylactide (PLA) with controlled molecular weights and narrow polydispersity indices. The molecular weight determined from an ¹H NMR analysis (PCL, M_n,NMR = 5380; PDXO, M_n,NMR = 5820; PLA, M_n,NMR = 6490) showed good agreement with the calculated values. The ¹H NMR and matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry analyses strongly indicated that the obtained compounds were the desired polyesters. The kinetic measurements confirmed the controlled/living nature for the HNTf₂‐catalyzed ROP of cyclic esters. A series of functional alcohols, such as propargyl alcohol, 6‐azido‐1‐hexanol, N‐(2‐hydroxyethyl)maleimide, 5‐hexen‐1‐ol, and 2‐hydroxyethyl methacrylate, successfully produced end‐functionalized polyesters. In addition, poly(ethylene glycol)‐block‐polyester, poly(δ‐valerolactone)‐block‐poly(ε‐caprolactone), and poly(ε‐caprolactone)‐block‐polylactide were synthesized using the HNTf₂‐catalyzed ROP. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2455–2463     

Miktoarm star copolymers of poly(ϵ‐caprolactone) from a novel heterofunctional initiator

A novel heterofunctional initiator, synthesized from pentaerythritol in a three step reaction sequence with two ring opening polymerization (ROP) and two atom transfer radical polymerization (ATRP) initiating sites, was used to prepare A₂B₂ miktoarm star copolymers of poly(ε‐caprolactone), PεCL, with polystyrene, PS, poly(methyl methacrylate), PMMA, poly(dimethylaminoethyl methacrylate), PDMAEMA, and poly(2‐hydroxyethyl methacrylate), PHEMA. A₂B miktoarm stars, A being PεCL or poly(δ‐valerolactone), PδVL and B PS were also prepared from ω,ω‐dihydroxy‐PS, synthesized from ω‐Br‐PS and serinol, by ROP of εCL or δVL. All polymers were characterized by size exclusion chromatography, ¹H NMR spectroscopy, and membrane osmometry. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5164–5181, 2007     

Synthesis of various end‐functionalized polyesters by controlled/living ring‐opening polymerization of lactones using pentafluorophenylbis(triflyl)methane

The ring‐opening polymerizations (ROPs) of ε‐caprolactone (ε‐CL) and δ‐valerolactone (δ‐VL) with pentafluorophenylbis(triflyl)methane (C₆F₅CHTf₂) as the organocatalyst and alcohol initiators were carried out. For the ROP using 3‐phenyl‐1‐propanol (PPA) as the initiator in CH₂Cl₂ at room temperature with the [ε‐CL or δ‐VL]₀/[PPA]₀/[C₆F₅CHTf₂] ratio of 50/1/0.1, the polymerization homogeneously proceeded to afford poly(ε‐caprolactone) (PCL) and poly(δ‐valerolactone) (PVL) having narrow polydispersity indices. The molecular weights of the obtained polymers determined from ¹H NMR spectra showed good agreement with those estimated from the initial ratio of [ε‐CL or δ‐VL]₀/[PPA]₀ and monomer conversions. The ¹H NMR, size exclusion chromatography, and matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry measurements strongly indicated that PCL and PVL possessed the 3‐phenylpropoxy group as the α‐chain‐end and the hydroxy group as the ω‐chain‐end. In addition, the controlled/living nature for the C₆F₅CHTf₂‐catalyzed ROP of lactones was confirmed by kinetic and chain‐extension experiments. The block copolymerization of PCL and PVL successfully proceeded to afford PCL‐b‐PVL and PVL‐b‐PCL. In addition, various end‐functionalized PCLs and PVLs with narrow molecular weight distributions were synthesized by the ROP of ε‐CL and δ‐VL using functional initiators, such as 6‐azido‐1‐hexanol, 2‐hydroxyethyl methacrylate, propargyl alcohol, N‐(2‐hydroxyethyl)maleimide, 4‐vinylbenzyl alcohol, 5‐hexen‐1‐ol, and 5‐norbornene‐2‐methanol. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Bifunctional imidodiphosphoric acid‐catalyzed controlled/living ring‐opening polymerization of trimethylene carbonate resulting block, α,ω‐dihydroxy telechelic,and star‐shaped polycarbonates

The ring‐opening polymerization (ROP) of trimethylene carbonate (TMC) using imidodiphosphoric acid (IDPA) as the organocatalyst and benzyl alcohol (BnOH) as the initiator has been investigated. The polymerization proceeded without decarboxylation to afford poly(trimethylene carbonate) (PTMiC) with controlled molecular weight and narrow polydispersity. ¹H NMR, SEC, and MALDI‐TOF MS measurements of the obtained PTMC clearly indicated the quantitative incorporation of the initiator at the chain end. The controlled/living nature for the IDPA‐catalyzed ROP of TMC was confirmed by the kinetic and chain extension experiments. A bifunctional activation mechanism was proposed for IDPA catalysis based on NMR and FTIR studies. Additionally, 1,3‐propanediol, 1,1,1‐trimethylolpropane, and pentaerythritol were used as di‐ol, tri‐, and tetra‐ol initiators, producing the telechelic or star‐shaped polycarbonates with narrow polydispersity indices. The well‐defined diblock copolymers, poly(trimethylene carbonate)‐block‐poly(δ‐valerolactone) and poly(trimethylene carbonate)‐block‐poly(ε‐caprolactone), have been successfully synthesized by using the IDPA catalysis system. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1009–1019     

Aminated PCL‐based copolymers by chemical modification of poly(α‐iodo‐ε‐caprolactone‐co‐ε‐caprolactone)

A novel method is proposed to access to new poly(α‐amino‐ε‐caprolactone‐co‐ε‐caprolactone) using poly(α‐iodo‐ε‐caprolactone‐co‐ε‐caprolactone) as polymeric substrate. First, ring‐opening (co)polymerizations of α‐iodo‐ε‐caprolactone (αIεCL) with ε‐caprolactone (εCL) are performed using tin 2‐ethylhexanoate (Sn(Oct)₂) as catalyst. (Co)polymers are fully characterized by ¹H NMR, ¹³C NMR, FTIR, SEC, DSC, and TGA. Then, these iodinated polyesters are used as polymeric substrates to access to poly(α‐amino‐ε‐caprolactone‐co‐ε‐caprolactone) by two different strategies. The first one is the reaction of poly(αIεCL‐co‐εCL) with ammonia, the second one is the reduction of poly(αN₃εCL‐co‐εCL) by hydrogenolysis. This poly(α‐amino‐ε‐caprolactone‐co‐ε‐caprolactone) (F_αNH2εCL < 0.1) opens the way to new cationic and water‐soluble PCL‐based degradable polyesters. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6104–6115, 2009     

Strontium‐based initiator system for ring‐opening polymerization of cyclic esters

An amino isopropoxyl strontium (Sr‐PO) initiator, which was prepared by the reaction of propylene oxide with liquid strontium ammoniate solution, was used to carry out the ring‐opening polymerization (ROP) of cyclic esters to obtain aliphatic polyesters, such as poly(ε‐caprolactone) (PCL) and poly(L ‐lactide) (PLLA). The Sr‐PO initiator demonstrated an effective initiating activity for the ROP of ε‐caprolactone (ε‐CL) and L‐lactide (LLA) under mild conditions and adjusted the molecular weight by the ratio of monomer to Sr‐PO initiator. Block copolymer PCL‐b‐PLLA was prepared by sequential polymerization of ε‐CL and LLA, which was demonstrated by ¹H NMR, ¹³C NMR, and gel permeation chromatography. The chemical structure of Sr‐PO initiator was confirmed by elemental analysis of Sr and N, ¹H NMR analysis of the end groups in ε‐CL oligomer, and Fourier transform infrared (FTIR) spectroscopy. The end groups of PCL were hydroxyl and isopropoxycarbonyl, and FTIR spectroscopy showed the coordination between Sr‐PO initiator and model monomer γ‐butyrolactone. These experimental facts indicated that the ROP of cyclic esters followed a coordination‐insertion mechanism, and cyclic esters exclusively inserted into the Sr–O bond. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1934–1941, 2003     

Facile synthesis of AB2‐type miktoarm star polymers through the combination of atom transfer radical polymerization and ring‐opening polymerization

A novel miktofunctional initiator ( 1 ), 2‐hydroxyethyl 3‐[(2‐bromopropanoyl)oxy]‐2‐{[(2‐bromopropanoyl)oxy]methyl}‐2‐methyl‐propanoate, possessing one initiating site for ring‐opening polymerization (ROP) and two initiating sites for atom transfer radical polymerization (ATRP), was synthesized in a three‐step reaction sequence. This initiator was first used in the ROP of ?‐caprolactone, and this led to a corresponding polymer with secondary bromide end groups. The obtained poly(?‐caprolactone) (PCL) was then used as a macroinitiator for the ATRP of tert‐butyl acrylate or methyl methacrylate, and this resulted in AB₂‐type PCL–[poly(tert‐butyl acrylate)]₂ or PCL–[poly(methyl methacrylate)]₂ miktoarm star polymers with controlled molecular weights and low polydispersities (weight‐average molecular weight/number‐average molecular weight < 1.23) via the ROP–ATRP sequence. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2313–2320, 2004     

One‐pot preparation of 3‐miktoarm star terpolymers via click [3 + 2] reaction

The preparation of 3‐miktoarm star terpolymers using nitroxide mediated radical polymerization (NMP), ring opening polymerization (ROP), and click reaction [3 + 2] are carried out by applying two types of one‐pot technique. In the first one‐pot technique, NMP of styrene (St), ROP of ε‐caprolactone (ε‐CL), and [3 + 2] click reaction (between azide end‐functionalized poly(ethylene glycol) (PEG‐N₃)/or azide end‐functionalized poly(methyl methacrylate) (PMMA‐N₃) and alkyne) are carried out in the presence of 2‐(hydroxymethyl)‐2‐methyl‐3‐oxo‐3‐(2‐phenyl‐2‐(2,2,6,6‐tetramethylpiperidin‐1‐yloxy)ethoxy) propyl pent‐4‐ynoate, 2 , as an initiator for 48 h at 125 °C (one‐pot/one‐step). As a second technique, NMP of St and ROP of ε‐CL were conducted using 2 as an initiator for 20 h at 125 °C, and subsequently PEG‐N₃ or azide end‐functionalized poly(tert‐butyl acrylate (PtBA‐N₃) was added to the polymerization mixture, followed by a click reaction [3 + 2] for 24 h at room temperature (one‐pot/two‐step). The 3‐miktoarm star terpolymers, PEG‐poly(ε‐caprolactone)(PCL)‐PS, PtBA‐PCL‐PS and PMMA‐PCL‐PS, were recovered by a simple precipitation in methanol without further purification. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3588–3598, 2007     

Synthesis,characterization, and micellization of PCL‐g‐PEG copolymers by combination of ROP and “Click” chemistry via “Graft onto” method

Biodegradable and biocompatible PCL‐g‐PEG amphiphilic graft copolymers were prepared by combination of ROP and “click” chemistry via “graft onto” method under mild conditions. First, chloro‐functionalized poly(ε‐caprolactone) (PCL‐Cl) was synthesized by the ring‐opening copolymerization of ε‐caprolactone (CL) and α‐chloro‐ε‐caprolactone (CCL) employing scandium triflate as high‐efficient catalyst with near 100% monomer conversion. Second, the chloro groups of PCL‐Cl were quantitatively converted into azide form by NaN₃. Finally, copper(I)‐catalyzed cycloaddition reaction was carried out between azide‐functionalized PCL (PCL‐N₃) and alkyne‐terminated poly(ethylene glycol) (A‐PEG) to give PCL‐g‐PEG amphiphilic graft copolymers. The composition and the graft architecture of the copolymers were characterized by ¹H NMR, FTIR, and GPC analyses. These amphiphilic graft copolymers could self‐assemble into sphere‐like aggregates in aqueous solution with diverse diameters, which decreased with the increasing of grafting density. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Isothiourea‐based lewis pairs for homopolymerization and copolymerization of 2,2‐dimethyltrimethylene carbonate with ε‐caprolactone and ω‐pentadecalactone

In this study, the homopolymerization of 2,2‐dimethyltrimethylene carbonate (DTC) and its copolymerizations with ε‐caprolactone (CL) were carried out in detail using the isothiourea‐based Lewis pairs comprised 2,3,6,7‐tetrahydro‐5H‐thiazolo(3,2‐a)pyrimidine and magnesium halides (MgX₂) with benzyl alcohol (BnOH) as the initiator. The copolymerization of DTC and CL via one‐pot addition produced randomly sequenced copolymers. On the other hand, a well‐defined linear poly(ε‐caprolactone)–block–poly(2,2‐dimethyltrimethylene carbonate) (PCL‐b‐PDTC) diblock copolymer was prepared by simple sequential ring‐opening polymerization of CL and DTC. In addition, poly(ω‐pentadecalactone)–block–PDTC diblock copolymer was successfully prepared by the same strategy. Moreover, PDTC–poly(ethylene glycol) (PEG)–PDTC triblock copolymer was synthesized in the presence of PEG 2000. The effects of different polymerization conditions on the polymerization reactions have been systematically discussed. The resulting polymers were characterized by the ¹H and ¹³C NMR spectra, gel permeation chromatography (GPC), differential scanning calorimetry (DSC), and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐ToF MS). The block copolyester structures were confirmed by the ¹³C NMR spectroscopy and DSC characterizations. These results indicated that the supposed mechanism was a dual catalytic mechanism. The proposed mechanism involved activation of the monomer via coordination to the MgX₂, and the initiator alcohol was deprotonated by base. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2349–2355     

稀土硫化物：e–己内酯开环聚合新催化剂

The ring-opening polymerization （ROP） of ε-caprolactone （ε-CL） using lanthanide thiolate complexes [（CH3CsH4）2Sm（μ-SPh）（THF）]2 （1） and Sm（SPh）3（HMPA）3 （2） as initiators has been investigated for the first time. Both of 1 and 2 were found to be highly efficient initiators for the ROP of ε-CL. The poly（ε-caprolactone） （PCL） with molecular weight Mn up to 1.97 ×10^5 and relatively narrow molecular weight distributions （1.20〈MW/Mn〈 2.00） have been obtained in high yield in the temperature range of 35-65℃. According to the polymer yield, 2 showed much higher activity than 1. However, the number-average molecular weight of PCL obtained with 2 was much lower than with 1. The possible polymerization mechanism of the ε-CL polymerization has been proposed based on the results of the end group analysis of the ε-CL oligomer.     

Bis(4‐nitrophenyl) phosphate as an efficient organocatalyst for ring‐opening polymerization of β‐butyrolactone leading to end‐functionalized and diblock polyesters

The ring‐opening polymerization (ROP) of β‐butyrolactone (β‐BL) has been studied using the organocatalysts of diphenyl phosphate (DPP) and bis(4‐nitrophenyl) phosphate (BNPP). The controlled ROP of β‐BL was achieved using BNPP, whereas that of using DPP was insufficient because of its low acidity. For the BNPP‐catalyzed ROP of β‐BL, the dual activation property for β‐BL and the chain‐end models of poly(β‐butyrolactone) (PBL) were confirmed by NMR measurements. The optimized polymerization condition for the ROP of β‐BL proceeded through an O‐acyl cleavage to produce the well‐defined PBLs with molecular weights up to 10,650 g mol^?1 and relatively narrow polydispersities of 1.19–1.39. Functional initiators were utilized for producing the end‐functionalized PBLs with the ethynyl, maleimide, pentafluorophenyl, methacryloyl, and styryl groups. Additionally, the diblock copolymers consisting of the PBL segment with the polyester or polycarbonate segments were prepared by the BNPP‐catalyzed ROPs of ε‐caprolactone or trimethylene carbonate without quenching. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2032–2039     

Synthesis and Characterization of Poly(ε-caprolactone-co-δ-valerolactone) with Pendant Carboxylic Functional Groups

In this paper, aliphatic polyesters functionalized with pendant carboxylic groups were synthesized via several steps. Firstly, substituted cyclic ketone, 2‐(benzyloxycarbonyl methyl)cyclopentanone (BCP) was prepared through the reaction of enamine with benzyl‐2‐bromoacetate, and subsequently converted into the relevant functionalized δ‐valerolactone derivative, 5‐(benzyloxy carbonylmethyl)‐δ‐valerolactone (BVL) by the Baeyer‐Villiger oxidation. Secondly, the ring‐opening polymerization of BVL with ε‐caprolactone was carried out in bulk using stannous octoate as the catalyst to produce poly(ε‐caprolactone‐co‐δ‐valerolactone) bearing the benzyl‐protected carboxyl functional groups [P(CL‐co‐BVL)]. Finally, the benzyl‐protecting groups of P(CL‐co‐BVL) were effectively removed by H₂ using Pd/C as the catalyst to obtain poly(ε‐caprolactone‐co‐δ‐valerolactone) bearing pendant carboxylic acids [P(CL‐co‐CVL)]. The structure and the properties of the polymer have been studied by Nuclear Magnetic Resonance (NMR), Fourier Infrared Spectroscopy (FT‐IR) and Differential Scan Calorimetry (DSC) etc. The NMR and FT‐IR results confirmed the polymer structure, and the ¹³C NMR spectra have clearly interpreted the sequence of ε‐caprolactone and 5‐(benzyloxycarbonylmethyl)‐δ‐valerolactone in the copolymer. When the benzyl‐protecting groups were removed, the aliphatic polyesters bearing carboxylic groups were obtained. Moreover, the hydrophilicity of the polymer was improved. Thus, poly(ε‐caprolactone‐co‐δ‐valerolactone) might have great potential in biomedical fields.     

Three‐arm star block copolymers of ε‐caprolactone and acrylic acid: Synthesis and micellization behavior

A series of well‐defined three‐arm star poly(ε‐caprolactone)‐b‐poly(acrylic acid) copolymers having different block lengths were synthesized via the combination of ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP). First, three‐arm star poly(ε‐caprolactone) (PCL) (M_n = 2490–7830 g mol^?1; M_w/M_n = 1.19–1.24) were synthesized via ROP of ε‐caprolactone (ε‐CL) using tris(2‐hydroxyethyl)cynuric acid as three‐arm initiator and stannous octoate (Sn(Oct)₂) as a catalyst. Subsequently, the three‐arm macroinitiator transformed from such PCL in high conversion initiated ATRPs of tert‐butyl acrylate (^tBuA) to construct three‐arm star PCL‐b‐P^tBuA copolymers (M_n = 10,900–19,570 g mol^?1; M_w/M_n = 1.14–1.23). Finally, the three‐arm star PCL‐b‐PAA copolymer was obtained via the hydrolysis of the PtBuA segment in three‐arm star PCL‐b‐P^tBuA copolymers. The chain structures of all the polymers were characterized by gel permeation chromatography, proton nuclear magnetic resonance (¹H NMR), and Fourier transform infrared spectroscopy. The aggregates of three‐arm star PCL‐b‐PAA copolymer were studied by the determination of critical micelles concentration and transmission electron microscope. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of 4μ‐PS2PEO2, 4μ‐PS2PCL2, 4μ‐PI2PEO2, and 4μ‐PI2PCL2 star‐shaped copolymers by the combination of glaser coupling with living anionic polymerization and ring‐opening polymerization

4μ‐A₂B₂ star‐shaped copolymers contained polystyrene (PS), poly(isoprene) (PI), poly(ethylene oxide) (PEO) or poly(ε‐caprolactone) (PCL) arms were synthesized by a combination of Glaser coupling with living anionic polymerization (LAP) and ring‐opening polymerization (ROP). Firstly, the functionalized PS or PI with an alkyne group and a protected hydroxyl group at the same end were synthesized by LAP and then modified by propargyl bromide. Subsequently, the macro‐initiator PS or PI with two active hydroxyl groups at the junction point were synthesized by Glaser coupling in the presence of pyridine/CuBr/N,N,N ′,N ″,N ″‐penta‐methyl diethylenetri‐amine (PMDETA) system and followed by hydrolysis of protected hydroxyl groups. Finally, the ROP of EO and ε‐CL monomers was carried out using diphenylmethyl potassium (DPMK) and tin(II)‐bis(2‐ethylhexanoate) (Sn(Oct)₂) as catalyst for target star‐shaped copolymers, respectively. These copolymers and their intermediates were well characterized by SEC, ¹H NMR, MALDI‐TOF mass spectra and FT‐IR in details. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of biocompatible and biodegradable block copolymers of polyvinyl alcohol‐block‐poly(ε‐caprolactone) using metal‐free living cationic polymerization

Applications of metal‐free living cationic polymerization of vinyl ethers using HCl · Et₂O are reported. Product of poly(vinyl ether)s possessing functional end groups such as hydroxyethyl groups with predicted molecular weights was used as a macroinitiator in activated monomer cationic polymerization of ε‐caprolactone (CL) with HCl · Et₂O as a ring‐opening polymerization. This combination method is a metal‐free polymerization using HCl · Et₂O. The formation of poly(isobutyl vinyl ether)‐b‐poly(ε‐caprolactone) (PIBVE‐b‐PCL) and poly(tert‐butyl vinyl ether)‐b‐poly(ε‐caprolactone) (PTBVE‐b‐PCL) from two vinyl ethers and CL was successful. Therefore, we synthesized novel amphiphilic, biocompatible, and biodegradable block copolymers comprised polyvinyl alcohol and PCL, namely PVA‐b‐PCL by transformation of acid hydrolysis of tert‐butoxy moiety of PTBVE in PTBVE‐b‐PCL. The synthesized copolymers showed well‐defined structure and narrow molecular weight distribution. The structure of resulting block copolymers was confirmed by ¹H NMR, size exclusion chromatography, and differential scanning calorimetry. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5169–5179, 2009     

Microwave‐assisted synthesis of star‐shaped poly(ε‐caprolactone)‐block‐poly(L‐lactide) copolymers and the crystalline morphologies

A monomode microwave reactor was used for the synthesis of designed star‐shaped polymers, which were based on dipentaerythritol with six crystallizable arms of poly(ε‐caprolactone)‐b‐poly(L ‐lactide) (PCL‐b‐PLLA) copolymer via a two‐step ring‐opening polymerization (ROP). The effects of irradiation conditions on the molecular weight were studied. Microwave heating accelerated the ROP of CL and LLA, compared with the conventional heating method. The resultant hexa‐armed polymers were fully characterized by means of FTIR, ¹H NMR spectrum, and GPC. The investigation of thermal properties and crystalline behaviors indicated that the crystalline behaviors of polymers were largely depended on the macromolecular architecture and the length of the block chains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Peptide‐poly(ε‐caprolactone) biohybrids by grafting‐from ring‐opening polymerization: Synthesis,aggregation, and crystalline properties

Well‐defined peptide‐poly(ε‐caprolactone) (Pep‐PCL) biohybrids were successfully synthesized by grafting‐from ring‐opening polymerization (ROP) of ε‐caprolactone (CL) using designed amine‐terminated sequence‐defined peptides as macroinitiators. MALDI‐TOF‐MS and ¹H NMR analyses confirmed the successful attachment of peptide to the PCL chain. The gel permeation chromatography (GPC) measurement showed that the Pep‐PCL biohybrids with controllable molecular weights and low polydispersities (PDI <1.5) were obtained by this approach. The aggregation of Pep‐PCL hybrid molecules in THF solution resulted in the formation of micro/nanospheres as confirmed through FESEM, TEM, and DLS analyses. The circular dichroism study revealed that the secondary structure of peptide moiety was changed in the peptide‐PCL biohybrids. The crystallization and melting behavior of Pep‐PCL hybrids were somewhat changed compared with that of neat PCL of comparable molecular weight as revealed by DSC and XRD measurements. In Pep‐PCL biohybrids, extinction rings were observed in the PCL spherulites, in contrast with the normal spherulite morphology of the neat PCL. There was a substantial decrease (4–5 folds) in the spherulitic growth rate after the incorporation of peptide moiety at the end of PCL chain as measured by polarizing optical microscopy. Pseudomonas lipase catalyzed enzymatic degradation was studied for Pep‐PCL hybrids and neat PCL. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of branch‐ring‐branch tadpole‐shaped [linear‐poly(ε‐caprolactone)]‐b‐[cyclic‐poly(ethylene oxide)]‐b‐ [linear‐poly(ε‐caprolactone)] by combination of glaser coupling reaction with ring‐opening polymerization

A novel amphiphilic branch‐ring‐branch tadpole‐shaped [linear‐poly(ε‐caprolactone)]‐b‐[cyclic‐poly(ethylene oxide)]‐b‐[linear‐poly(ε‐caprolactone)] [(l‐PCL)‐b‐(c‐PEO)‐b‐(l‐PCL)] was synthesized by combination of glaser coupling reaction with ring‐opening polymerization (ROP) mechanism. The self‐assembling behaviors of (l‐PCL)‐b‐(c‐PEO)‐b‐(l‐PCL) and their π‐shaped analogs of poly(ε‐caprolactone)/poly(ethylene oxide)]‐b‐poly(ethylene oxide)‐b‐[poly(ε‐caprolactone)/poly(ethylene oxide) with comparable molecular weight in water were preliminarily investigated. The results showed that the micelles formed from the former took a fiber look, however, that formed from the latter took a spherical look. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of biodegradable amphiphilic ABC Y‐shaped miktoarm terpolymer by click chemistry for drug delivery

Biodegradable amphiphilic ABC Y‐shaped triblock copolymer (MPBC) containing PEG, PBLA, and PCL segments was synthesized via the combination of enzymatic ring‐opening polymerization (ROP) of epsilon‐caprolactone, ROP of BLA‐N‐carboxyanhydride and click chemistry, where PEG, PBLA, and PCL are poly(ethylene glycol), poly(benzyl‐l ‐aspartate), and polycaprolactone, respectively. Propynylamine was employed as ROP initiator for the preparation of alkynyl‐terminated PBLA and methyloxy‐PEG with hydroxyl and azide groups at the chain‐end was used as enzymatic ROP initiator for synthesis of monoazido‐midfunctionalized block copolymer mPEG‐b‐PCL. The subsequent click reaction led to the formation of Y‐shaped asymmetric heteroarm terpolymer MPBC. The polymer structures were characterized by different analyses. The MPBC terpolymer self‐assembled into micelles and physically encapsulated drug doxorubicin (DOX) to form DOX‐loaded micelles, which showed good stability and slow drug release. In vitro cytotoxicity study indicated that the MPBC micelles were nontoxic and the DOX‐loaded micelles displayed obvious anticancer activity similar to free DOX against HeLa cells. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3346–3355