Photoinduced ultrafast electron transfer from CdSe quantum dots to Re-bipyridyl complexes

Ultrafast dissociation of excitons in CdSe quantum dots via electron transfer to adsorbed Re-bipyridyl complexes was demonstrated. The dissociation pathway was determined by the observation of reduced adsorbate using femtosecond IR spectroscopy. The rate of electron transfer was shown to increase at smaller QD sizes. Electron transfer time as fast as 2.3 ps was observed, faster than the exciton annihilation time in CdSe. The ultrafast charge separation in this quantum dot-adsorbate donor-acceptor complex provides a potential approach for separating multiple excitons in quantum dots.     

Ultrafast charge separation and recombination dynamics in lead sulfide quantum dot-methylene blue complexes probed by electron and hole intraband transitions

Lead salt quantum dots (QDs) have emerged as attractive materials for solar energy conversion because of their broad spectral response, long exciton lifetime, and efficient multiexciton generation. However, charge separation dynamics from these QDs remain poorly understood. In this study we investigate charge separation and recombination dynamics in PbS-methylene blue (MB(+)) complexes by femtosecond transient absorption spectroscopy. We show that while the 1S electrons and holes in excited PbS QDs lead to overlapping transient absorption features in the visible and near-IR regions, their intraband absorptions in the mid-IR can be monitored independently to directly follow the charge separation and recombination processes. The charge separation and recombination rates in PbS-MB(+) complexes were found to be (2.7 ± 0.2) × 10(12) and (1.1 ± 0.2) × 10(11) s(-1), respectively. The ultrafast charge separation rate suggests the possibility of hot electron injection and multiexciton dissociation from these strongly quantum confined QDs, consistent with recent reports of these phenomena at lead salt QD/TiO(2) interfaces.     

Mechanisms for photogeneration and recombination of multiexcitons in semiconductor nanocrystals: implications for lasing and solar energy conversion

One consequence of strong spatial confinement of electronic wave functions in ultrasmall semiconductor nanocrystals is a great enhancement of carrier-carrier interactions, which has a dramatic effect on the spectral and dynamical properties of both single and multiexciton states. Strong carrier-carrier interactions open new nanocrystal-specific energy relaxation and recombination channels associated, e.g., with electron-hole energy transfer and ultrafast nonradiative Auger recombination. Further, they lead to extremely efficient direct photogeneration of multiple electron-hole pairs (excitons) by single photons known as carrier (or exciton) multiplication. This review focuses on the effect of Coulomb interactions on carrier recombination and photogeneration mechanisms in nanocrystals based on II-VI (e.g., CdSe) and IV-VI (e.g., PbSe) compounds. The specific topics discussed here include the fine structure of the band-edge optical transitions and its effect on temperature-dependent single-exciton recombination dynamics, Auger recombination of multiexcitons in size- and shape-controlled nanocrystals with a specific emphasis on optical-gain properties of nanocrystalline materials (including quantum rods and multicomponent core-shell heterostructures), and the direct generation of multiple excitons via carrier multiplication and its implications in photovoltaic technologies.     

Long-lived Single Excitons,Trions, and Biexcitons in CdSe/CdTe Type-Ⅱ Colloidal Quantum Wells

Light-harvesters with long-lived excited states are desired for efficient solar energy conversion systems. Many solar-to-fuel conversion reactions, such as H₂ evolution and CO₂ reduction, require multiple sequential electron transfer processes, which leads to a complicated situation that excited states involves not only excitons (electron-hole pairs) but also multi-excitons and charged excitons. While long-lived excitons can be obtained in various systems (e.g., semiconductor nanocrystals), multi-excitons and charged excitons are typically shorted-lived due to nonradiative Auger recombination pathways whereby the recombination energy of an exciton is quickly transferred to the third carrier on a few to hundreds of picoseconds timescale. In this work, we report a study of excitons, trions (an exciton plus an additional charge), and biexcitons in CdSe/CdTe colloidal quantum wells or nanoplatelets. The typeⅡ band alignment effectively separates electrons and holes in space, leading to a single exciton lifetime of 340 ns which is ~2 order of magnitudes longer than that in plane CdSe nanoplatelets. More importantly, the electron-hole separation also dramatically slows down Auger decay, giving rise to a trion lifetime of 70 ns and a biexciton lifetime of 11 ns, among the longest values ever reported for colloidal nanocrystals. The long-lived exciton, trion, and biexciton states, combined with the intrinsically strong light-absorption capability of two-dimensional systems, enable the CdSe/CdTe type-Ⅱ nanoplatelets as promising light harvesters for efficient solar-to-fuel conversion reactions.     

Nonlinear optical approach to multiexciton relaxation dynamics in quantum dots

Unlike the majority of molecular systems quantum dots can accommodate multiple excitations, which is a particularly important attribute for potential lasing applications. We demonstrate in this work the concept of using nth order nonlinear spectroscopies in the transient grating configuration as a means of selectively exciting (n-1)/2 excitons in a semiconductor and probing the subsequent relaxation dynamics. We report a direct observation of multiparticle dynamics on ultrashort time scales through comparison of third and fifth order experiments for CdSe colloidal quantum dots. Time constants associated with multiexciton recombination and depopulation dynamics are reported. Deviation from a Poisson model for the distribution of photoexcited excitons, biexcitons, and triexcitons is also discussed.     

Controlling the electronic coupling between CdSe quantum dots and thiol capping ligands via pH and ligand selection

Comparison of the UV-vis absorption spectra of CdSe quantum dots (QDs) capped with various mercaptocarboxylic acid capping ligands reveals that only 4-mercaptobenzoic acid (MBzA) capping ligands lower the apparent optical band gap. We propose that the delocalization of the excitons in the CdSe QDs is extended onto the ligands via electronic coupling to the π system of the 4-mercaptobenzoic acid molecules through the Cd-S bond. Furthermore, we demonstrate that the electronic coupling between the QDs and the (MBzA) thiol ligands is influenced by the strength of the Cd-S bond that can be changed by protonating the S atom.     

Wave function engineering for efficient extraction of up to nineteen electrons from one CdSe/CdS quasi-type II quantum dot

Solar-to-fuel conversion devices require not only efficient catalysts to accelerate the reactions, but also light harvesting and charge separation components to absorb multiple photons and to deliver multiple electrons/holes to the catalytic centers. In this paper, we show that the spatial distribution of electron and hole wave functions in CdSe/CdS quasi-type II quantum dots enables simultaneous ultrafast charge separation (0.18 ps to adsorbed Methylviologen), ultraslow charge recombination (0.4 μs), and slow multiple-exciton Auger annihilation (biexciton lifetime 440 ps). Up to nineteen excitons per QD can be generated by absorbing multiple 400 nm photons and all excitons can be dissociated with unity yield by electron transfer to adsorbed methylviologen molecules. Our finding demonstrates that (quasi-) type II nanoheterostructures can be engineered to efficiently dissociate multiple excitons and deliver multiple electrons to acceptors, suggesting their potential applications as light harvesting and charge separation components in artificial photosynthetic devices.     

Exciton binding energy in semiconducting single-walled carbon nanotubes

The exciton binding energy serves as a critical criterion for identification of the nature of elementary excitations (neutral excitons versus a pair of charged carriers) in semiconductor materials. An exciton binding energy of 0.41 eV is determined experimentally for a selected nanotube type, the (8,3) tube, confirming the excitonic nature of the elementary excitations. This determination is made from the energy difference between an electron-hole continuum and its precursor exciton. The electron-hole continuum results from dissociation of excitons following extremely rapid exciton-exciton annihilation and possibly also ultrafast relaxation from the second to the first exciton states and is characterized by distinct spectroscopic and dynamic signatures.     

False multiple exciton recombination and multiple exciton generation signals in semiconductor quantum dots arise from surface charge trapping

Multiple exciton recombination (MER) and multiple exciton generation (MEG) are two of the main processes for assessing the usefulness of quantum dots (QDs) in photovoltaic devices. Recent experiments, however, have shown that a firm understanding of both processes is far from well established. By performing surface-dependent measurements on colloidal CdSe QDs, we find that surface-induced charge trapping processes lead to false MER and MEG signals resulting in an inaccurate measurement of these processes. Our results show that surface-induced processes create a significant contribution to the observed discrepancies in both MER and MEG experiments. Spectral signatures in the transient absorption signals reveal the physical origin of these false signals.     

Exciton spin relaxation in colloidal CdSe quantum dots at room temperature

Size dependence of spin dynamics in colloidal CdSe quantum dots (QDs) are investigated with circularly polarized pump-probe transmission spectroscopy at room temperature. The excitation energy is tuned to resonance with the lowest exciton (1S(h)1S(e)) energy of the CdSe QDs. The exciton spin dynamics of CdSe QD with the diameter of 5.2 nm shows monoexponential decay with a typical time constant of about 1-3 ps depending on the excitation energy. For the cases of CdSe QDs with smaller size (with the diameter of 4.0 and 2.4 nm), the exciton spin relaxation shows biexponential decay, a fast component with time constant of several ps and a slow one with time constant of hundreds of ps to nanosecond time scale. The fast spin relaxation arises from the bright-dark transition, i.e., J = ±1 ? -/+2 transition. This process is dominated by the hole spin flips, while the electron spin conserves. The slow spin relaxation is attributed to the intralevel exciton transitions (J = ±1 ? -/+1 transition), which is relevant to the electron spin flip. Our results indicate that the exciton spin relaxation pathways in CdSe QD are controllable by monitoring the particle size, and polarized pump-probe spectroscopy is proved to be a sensitive method to probe the exciton transition among the fine structures.     

Excitons in semiconducting carbon nanotubes: diameter-dependent photoluminescence spectra

Semiconducting single-walled carbon nanotubes are one-dimensional (1D) quantum nanostructures and their unique optical responses arise from stable 1D excitons with huge binding energies. Here we review recent studies on optical properties of semiconducting carbon nanotubes. The diameter dependence of luminescence spectra and dynamics are revealed by single-nanotube spectroscopy and time-resolved optical spectroscopy. Short-range Coulomb interactions play a crucial role in energy structures of dark, triplet, and charged excitons. Enhanced exciton-exciton interactions in 1D semiconductor nanostructures determine nonlinear optical responses. We present generic configurations of neutral and charged excitons and discuss exciton optics of single-walled carbon nanotubes.     

Exciton interactions in CdS nanocrystal aggregates in reverse micelle

Here we report the formation and spectroscopic properties of cadmium sulfide (CdS) nanocrystal systems: individual nanocrystal and CdS aggregates. The optical absorption and luminescence spectra of the aggregated CdS nanocrystals and individual nanocrystal show exciton aggregate and individual exciton characteristics. Although it is not Bose-Einstein condensation, such aggregated quantum dots (QDs) seem to supply us opportunity to study the interactions and condensation of excitons in multi-QDs system, not in the separated QDs system.     

Subsecond luminescence intensity fluctuations of single CdSe quantum dots

Photoluminescence (PL) intermittency characteristics are examined for single quantum dots (QDs) in a CdSe QD sample synthesized at a slow rate at 75 degrees C. Although the PL quantum efficiency was relatively low ( approximately 0.25), we noticed that the PL intensity of single CdSe QDs fluctuated on a subsecond time scale with short-lived "on" and "off" states. The subsecond PL intensity fluctuations of CdSe QDs are different from "on" and "off" PL blinking generally observed for QDs fluctuating on a millisecond to minute time scale. We characterized single QDs by identifying polarized excitations, topographic imaging using atomic force microscopy (AFM), and transmission electron microscopy (TEM). From analysis of the PL intensity trajectories from >100 single CdSe QDs, the average intermittency time was 213 ms. From the PL quantum efficiency, slow growth of QDs, intensity trajectory analyses, and previous reports relating surface trap states and PL properties of QDs, we attribute the subsecond PL intensity fluctuations of single CdSe QDs and short-lived "on" and "off" states to a high-density distribution of homogeneous surface trap states.     

Preparation and third-order optical nonlinearity of self-assembled chitosan/CdSe-ZnS core-shell quantum dots multilayer films

The self-assembled chitosan CdSe quantum dots (QDs) and chitosan CdSe-ZnS core-shell QDs films have been prepared by using layer-by-layer electrostatic technique. The well-ordered nanostructure and the layer-by-layer deposition of the QDs are revealed by AFM and exciton absorption spectra, respectively. The optical nonlinearity of the composite films were studied by using Z-scan technique with femtosecond pulses at the wavelength of 790 nm, the value of third-order susceptibility of core-shell QDs are measured to be about 1.1 x 10(-8) esu, which is about 200% larger than that of CdSe QDs of 5.3 x 10(-9) esu. This has potential applications in all-optical switches in optical information processing.     

Interface effects and relaxation processes in nanocomposites based on CdSe/ZnS semiconductor quantum dots and porphyrin molecules

Controllable self-assembly and properties of nanocomposites based on CdSe/ZnS semiconductor quantum dots (QDs) and tetrapyridylporphyrin molecules (H₂P) as well as the dynamics of relaxation processes in these systems were studied for solutions and single nanoobjects in the temperature range of 77–295 K. It was proved that the formation of surface states of different nature is crucial to nonradiative relaxation of exciton excitation in QDs. The efficiency of QD→Н₂Р energy transfer was shown to be at most 10–15%. Regularities of photoluminescence (PL) quenching for QDs in nanocomposites in solutions of different polarity correlate with the dependences of PL blinking for single QDs. A scheme was proposed of excited states and main relaxation channels of exciton excitation energy in semiconductor QDs and QD–Н₂Р nanocomposites.     

Wave function engineering for ultrafast charge separation and slow charge recombination in type II core/shell quantum dots

The size dependence of optical and electronic properties of semiconductor quantum dots (QDs) have been extensively studied in various applications ranging from solar energy conversion to biological imaging. Core/shell QDs allow further tuning of these properties by controlling the spatial distributions of the conduction-band electron and valence-band hole wave functions through the choice of the core/shell materials and their size/thickness. It is possible to engineer type II core/shell QDs, such as CdTe/CdSe, in which the lowest energy conduction-band electron is largely localized in the shell while the lowest energy valence-band hole is localized in the core. This spatial distribution enables ultrafast electron transfer to the surface-adsorbed electron acceptors due to enhanced electron density on the shell materials, while simultaneously retarding the charge recombination process because the shell acts as a tunneling barrier for the core localized hole. Using ultrafast transient absorption spectroscopy, we show that in CdTe/CdSe-anthraquinone (AQ) complexes, after the initial ultrafast (~770 fs) intra-QD electron transfer from the CdTe core to the CdSe shell, the shell-localized electron is transferred to the adsorbed AQ with a half-life of 2.7 ps. The subsequent charge recombination from the reduced acceptor, AQ(-), to the hole in the CdTe core has a half-life of 92 ns. Compared to CdSe-AQ complexes, the type II band alignment in CdTe/CdSe QDs maintains similar ultrafast charge separation while retarding the charge recombination by 100-fold. This unique ultrafast charge separation and slow recombination property, coupled with longer single and multiple exciton lifetimes in type II QDs, suggests that they are ideal light-harvesting materials for solar energy conversion.     

Morphology control of cadmium selenide nanocrystals: insights into the roles of di-n-octylphosphine oxide (DOPO) and ucid (DOPA)

Di-n-octylphosphine oxide (DOPO) and di-n-octylphosphinic acid (DOPA), as two of impurities found in commercial tri-n-octylphosphine oxide (TOPO), generate significant differences in the outcomes of CdSe-nanocrystal (NC) syntheses. Using n-tetradecylphosphonic acid (TDPA) as the primary acid additive, quantum dots (QDs) are grown with DOPO added, whereas quantum rods (QRs) are grown in the presence of DOPA. While using oleic acid (OA) as the primary acid additive, QDs are generated and the QDs produced with DOPA exhibit larger sizes and size distributions than those produced with DOPO. (31)P NMR analyses of the reaction mixtures reveal that the majority of the DOPO has been converted into DOPA and di-n-octylphosphine (DOP) with DOP being removed via evacuation over the course of Cd-precursor preparation. The origin of the puzzling differences in the shape control of CdSe NCs in the presence of DOPO and DOPA is elucidated to be the small quantity of DOPO present, which liberates DOP during NC synthesis. In the presence of DOP, regardless of DOPA, the precursor-conversion kinetics and thus the nucleation kinetics are dramatically accelerated, generating a large number of nuclei by consuming a significant amount of CdSe nutrients, favoring QD growth. Similarly, QD growth is favored by the fast nucleation kinetics in the presence of OA, and the broader size distributions of QDs with DOPA are due to a second nucleation event initiated by the more stable Cd-di-n-octylphosphinate component. In contrast, a slow nucleation event results in the growth of QRs in the case of using DOPA and TDPA, where no DOPO or DOP is present. The results, thus, demonstrate the important role of precursor-conversion kinetics in the control of NC morphologies.     

Photophysical Properties of Au‐CdTe Hybrid Nanostructures of Varying Sizes and Shapes

We design well‐defined metal‐semiconductor nanostructures using thiol‐functionalized CdTe quantum dots (QDs)/quantum rods (QRs) with bovine serum albumin (BSA) protein‐conjugated Au nanoparticles (NPs)/nanorods (NRs) in aqueous solution. The main focus of this article is to address the impacts of size and shape on the photophysical properties, including radiative and nonradiative decay processes and energy transfers, of Au‐CdTe hybrid nanostructures. The red shifting of the plasmonic band and the strong photoluminescence (PL) quenching reveal a strong interaction between plasmons and excitons in these Au‐CdTe hybrid nanostructures. The PL quenching of CdTe QDs varies from 40 to 86 % by changing the size and shape of the Au NPs. The radiative as well as the nonradiative decay rates of the CdTe QDs/QRs are found to be affected in the presence of both Au NPs and NRs. A significant change in the nonradiative decay rate from 4.72×10⁶ to 3.92×10¹⁰ s^?1 is obtained for Au NR‐conjugated CdTe QDs. It is seen that the sizes and shapes of the Au NPs have a pronounced effect on the distance‐dependent energy transfer. Such metal‐semiconductor hybrid nanostructures should have great potentials for nonlinear optical properties, photovoltaic devices, and chemical sensors.     

Exciton multiplication and relaxation dynamics in quantum dots: applications to ultrahigh-efficiency solar photon conversion

Huge amounts of carbon-free energy will be required during the coming decades in order to stabilize atmospheric CO2 to acceptable levels. Solar energy is the largest source of non-carbonaceous energy and can be used to produce both electricity and fuel. However, the ratio of the areal cost to the conversion efficiency for devices converting solar photons to electricity or fuel must be reduced by at least 1 order of magnitude from the present values; this requires large increases in the cell efficiency and large reductions in the cost per unit area. We have shown how semiconductor quantum dots may greatly increase photon conversion efficiencies by producing multiple excitons from a single photon. This is possible because quantization of energy levels in quantum dots slows the cooling of hot excitons, promotes multiple exciton generation, and lowers the photon energy threshold for this process. Quantum yields of 300% for exciton formation in PbSe quantum dots have been reported at photon energies 3.8 times the HOMO-LUMO transition energy, indicating the formation of three excitons/photon for all photoexcited quantum dots. Similar high quantum yields have also been reported for PbS quantum dots. A new model for this effect that is based on a coherent superposition of multiple excitonic states has been proposed.     

Determination of the rod-wire transition length in colloidal indium phosphide quantum rods

Colloidal InP quantum rods (QRs) having controlled diameters and lengths are grown by the solution-liquid-solid method, from Bi nanoparticles in the presence of hexadecylamine and other conventional quantum dot surfactants. These quantum rods show band-edge photoluminescence after HF photochemical etching. Photoluminescence efficiency is further enhanced after the Bi tips are selectively removed from the QRs by oleic acid etching. The QRs are anisotropically 3D confined, the nature of which is compared to the corresponding isotropic 3D confinement in quantum dots and 2D confinement in quantum wires. The 3D-2D rod-wire transition length is experimentally determined to be 25 nm, which is about 2 times the bulk InP exciton Bohr radius (of approximately 11 nm).