基于天然高分子基元的阻隔层对磁性载药聚乳酸微球的控释作用

利用层层组装技术构建了基于天然高分子壳聚糖和海藻酸钠的阻隔层, 并研究了该阻隔层对磁性载药聚乳酸微球的药物释放作用. 实验结果表明, 阻隔层能够有效抑制模型药物的突释, 具有延缓药物释放的效果. 具有阻隔层的磁性载药体系具有药物释放平缓和生物相容性高等特点, 是理想的磁靶向载药体系.     

磁性微胶囊的制备及其药物缓控释性能

用乳液-凝胶法制备了磁性壳聚糖/海藻酸钠微胶囊. 在壳聚糖/海藻酸钠微胶囊中掺入Fe3O4磁性中空球, 使微胶囊具有磁靶向性能. 以头孢拉定作为模型药物研究了载药磁性微胶囊的载药量、包封率及药物缓控释性能等. 结果表明, 提高头孢拉定的初始浓度可以提高载药量, 却不利于提高药物的包封率. 所制备的微胶囊在各种缓冲溶液中长时间内具有显著的缓释效果, 并具有pH 刺激响应释放的性能, 即在模拟胃液中的药物释放率大大降低, 而在模拟体液和肠液中的释放时间大大延长, 可达50 h以上. 另外, 在外加磁场作用下, 微胶囊表现出良好的磁定向运动性能, 为磁靶向药物输送提供基础.     

葡萄糖响应苯硼酸接枝壳聚糖盐酸盐抗肿瘤药物载体

通过分子改性向壳聚糖盐酸盐高分子链中引入苯硼酸基,合成了双亲性化合物苯硼酸接枝壳聚糖盐酸盐.细胞毒性实验表明苯硼酸接枝壳聚糖盐酸盐具有良好的细胞相容性.该双亲性化合物能够自组装成胶束聚集体,并包封疏水药物.以阿霉素为模型药物,研究了载药胶束聚集体的体外药物释放行为,结果表明,阿霉素在载药胶束聚集体内能够持续释放,且具有葡萄糖响应性.在生理p H=7.4和固体肿瘤弱酸性(p H=6.5)条件下,药物的释放速度十分缓慢,而当释放介质中有葡萄糖存在时,药物释放速度都明显加快.     

克拉霉素漂浮-生物粘附微囊的制备及性能研究

选用乳化-溶剂挥发法制备乙基纤维素载药微球(EMs), 并通过内部凝胶化法进行包衣制得海藻酸钠-乙基纤维素载药微囊(AEMs), 最后通过离子交联法进一步包衣制得壳聚糖-海藻酸钠-乙基纤维素载药微囊(CAEMs). 研究克拉霉素漂浮\|生物粘附微囊的制备工艺, 并考察微囊的体外漂浮性能、 粘附性能及体内滞留性能. 结果表明, CAEMs球形度较好, 药物包封率为72.3%~78.2%, 载药量为7.1%~12.7%. 在pH=5的醋酸缓冲液中, 6 h时的累积释放率为56.6%~70.6%, 漂浮率大于70%, 4 h时的体内滞留率为60.5%. CAEMs有望通过延长药物胃内滞留时间, 在临床用于根除幽门螺旋杆菌, 从而降低消化道溃疡的复发率.     

双重载药多层海藻酸盐-壳聚糖缓释微球的制备及体外释放

采用滴注法将海藻酸钠与钙离子交联,制成负载血管内皮生长因子(VEGF)的藻酸钙核心球,利用层层自组装技术在核心球的表面依次包覆壳聚糖、海藻酸和壳聚糖,壳聚糖中负载万古霉素(VAN),形成多药载药缓控体系.采用正交实验考察海藻酸钠浓度、钙离子浓度及壳聚糖浓度对VEGF和VAN的药物包封率和载药量的影响,优化了制备工艺.采用扫描电子显微镜观察多层微球的表面、截面形貌及粒径,采用傅里叶变换红外光谱检测海藻酸盐与壳聚糖的自组装情况,分别采用酶联免疫吸附(ELISA)双抗体夹心法和紫外分光光度法检测VEGF和VAN的包封率、载药量及体外释放情况.结果表明,海藻酸钠最优浓度为0.04g/mL,氯化钙最优浓度为0.15g/mL,壳聚糖最优浓度为0.01g/mL.微球光滑圆整,均质实心,直径900~1100μm,VEGF的包封率达61.31%,VAN的包封率为3.48%.体外释放实验结果表明,VEGF缓释时间为15.5d,并出现2个释放高峰;VAN缓释时间为4.5d,释药情况平稳持续,无明显突释.双重载药多层包覆微球兼具控制感染和促进血管生成两种潜能,有望应用于组织工程骨的基础研究和临床实践.     

肽类药物口服剂型材料及控制释放性能研究Ⅰ.壳聚糖─海藻酸盐微囊对胰岛素的控释作用

应用壳聚糖-海藻酸盐微囊技术制备了一系列胰岛素微囊，并研究了不同反应条件如海藻酸钠浓度、壳聚糖浓度、壳聚糖分子量及壳聚糖溶液pH值对微囊的胰岛素包封率及其释放性能的影响。结果表明，海藻酸钠浓度越高，微囊对胰岛素的包封率越高，在模拟小肠液中释放速率越低；壳聚糖浓度越大，微囊的胰岛素包封率及其在模拟胃液中释放率越高，在模拟肠液中释放达最大值所需时间越长；而随壳聚糖分子量减小，微囊在胃液中释放率增高；壳聚糖溶液pH值的变化对微囊的胰岛素包封率未造成明显影响。     

肽类药物口服剂型材料及控制释放性能研究：Ⅰ.壳聚糖—海藻酸盐？…

应用壳聚糖－海藻酸盐微囊技术制备了一系列胰岛素微型,并研究了不同反应条件如海藻酸钠浓度,壳聚糖浓度,壳聚糖分子量及壳聚糖溶液ｐＨ值对生囊的胰岛素包封率及其释放性能的影响。结果表明,海藻酸钠浓度越高,微囊对胰岛素的包封率越高,在模拟小肠液中释放速度越低;壳聚糖浓度越大,微囊的胰岛素包封率及其在模拟胃液中释放率越高,在模拟肠液中释放达最大值所需时间越长;而随壳聚糖分子量减小,微囊在胃液中释放率增高;壳     

低分子肝素/壳聚糖/海藻酸钠复合微囊的制备及释药性能

低分子肝素/壳聚糖/海藻酸钠复合微囊的制备及释药性能;壳聚糖; 海藻酸钠; 低分子肝素; 微囊; 释药性能     

壳聚糖─海藻酸钠微囊对蛋白质控制释放的研究

采用乳化法制备了可注射用壳聚糖海藻酸钠微囊, 其粒径小于２００ μｍ ,且具有相对较窄的近似高斯分布。牛血清白蛋白作为模型药物在微囊中的包埋率可超过５０ ％ 。通过壳聚糖在海藻酸钠微囊表面的复合,牛血清白蛋白从微囊中的持续释放时间从几个小时延长到半个月以上。     

壳聚糖—海藻酸钠微囊对蛋白质控制释放的研究

采用乳化法制备了可注射用壳聚糖－海藻酸钠微囊，其粒径小于２００μｍ，且具有相对较窄的近似高斯分布。牛血清白蛋白作为模型药物在微囊中的包埋率可超过５０％。通过壳聚糖在海藻酸钠微囊表面的复合，牛血清白蛋白从微囊中的持续释放时间从几个小时延长到半个月以上。     

Thermodynamic characteristics and Langmuir-Blodgett deposition behavior of mixed DPPA/DPPC monolayers at air/liquid interfaces

The role of dipalmitoylphosphatic acid (DPPA) as a transfer promoter to enhance the Langmuir-Blodgett (LB) deposition of a dipalmitoylphosphatidylcholine (DPPC) monolayer at air/liquid interfaces was investigated, and the effects of Ca2+ ions in the subphase were discussed. The miscibility of the two components at air/liquid interfaces was evaluated by surface pressure-area per molecule isotherms, thermodynamic analysis, and by the direct observation of Brewster angle microscopy (BAM). Multilayer LB deposition behavior of the mixed DPPA/DPPC monolayers was then studied by transferring the monolayers onto hydrophilic glass plates at a surface pressure of 30 mN/m. The results showed that the two components, DPPA and DPPC, were miscible in a monolayer on both subphases of pure water and 0.2 mM CaCl2 solution. However, an exception occurs between X(DPPA)=0.2 and 0.5 at air/CaCl2-solution interface, where a partially miscible monolayer with phase separation may occur. Negative deviations in the excess area analysis were found for the mixed monolayer system, indicating the existence of attractive interactions between DPPA and DPPC molecules in the monolayers. The monolayers were stable at the surface pressure of 30 mN/m for the following LB deposition as evaluated from the area relaxation behavior. It was found that the presence of Ca2+ ions had a stabilization effect for DPPA-rich monolayers, probably due to the association of negatively charged DPPA molecules with Ca2+ ions. Moreover, the Ca2+ ions may enhance the adhesion of DPPA polar groups to a glass surface and the interactions between DPPA polar groups in the multilayer LB film structure. As a result, Y-type multilayer LB films containing DPPC could be fabricated from the mixed DPPA/DPPC monolayers with the presence of Ca2+ ions.     

Mixed Monolayers of Amphiphilic Cyclodextrins and Phospholipids: I. Miscibility under Dynamic Conditions of Compression

The miscibility of per-(6-amino-2,3-di-O-hexyl) β-CD hydrochloride salt abbreviated NH₃-β-CD-OC6 with 1,2 dipalmitoyl, 3-sn-phosphatidyl choline (DPPC) and 1,2 dipalmitoyl, 3-sn-phosphatidic acid (DPPA) and of per-(6-dodecanoylamino-6-deoxy) β-CD abbreviated C₁₁CONH-β-CD with DPPC has been assessed by surface pressure–area experiments under dynamic conditions. The determination of their mixing behavior has been approached by thermodynamic characterization derived from a comparison of the composition dependence of collapse pressure, for various contents of two components in monolayers, with that predicted from a model of ideal mixing. Component miscibility has additionally been addressed by the use of the Smaby–Brockman state equation for liquid-expanded monolayers which characterizes interaction between monolayer components using the water activity coefficient. While for both NH₃-β-CD-OC6–DPPC and NH₃-β-CD-OC6–DPPA systems the average surface areas followed the additivity rule, for the latter system surface pressures at collapse significantly deviated from ideality. The occurrence of an interaction at the level of oppositely charged polar groups of NH₃-β-CD-OC6 and DPPA was also demonstrated by the nonideal composition dependence of the water activity coefficient (f₁) characterizing the interfacial water. The mixing energies and interaction parameters at collapse pressures were calculated using the Joos approach. Positive values of these factors indicated that NH₃-β-CD-OC6 and DPPA mixed films were thermodynamically less stable than the films in which ideal mixing of components occurred. The mixing of NH₃-β-CD-OC6 with DPPC appeared to be almost ideal. In the case of the C₁₁CONH-β-CD–DPPC system, analysis according to both the Joos and Goodrich approaches showed the occurrence of an important interaction which resulted in negative mixing energies characteristic of thermodynamically stable mixed films.     

A Calcium Solid State Ion Selective Minisensor Based on Lipid Films on ZnO Nanorods

This article describes the development of a calcium solid minisensor based on lipid films on ZnO nanorods. The lipid film was composed from dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidylcic acid (DPPA). The calibration graph was logarithmically related to the concentration of calcium ions in the range from 10^?6 to 10^?3 M. The response times of the electrode were less than 5 s. No memory effects were observed for this electrode. The reproducibility of the electrode was less than 5 %. The electrode has shown good stability for a period of 1 month. The influence of a wide range of metals and anions as potential interferences was checked. The method was applied to the rapid detection of calcium ions in mineral waters.     

Fluorescence transduction of an enzyme-substrate reaction by modulation of lipid membrane structure

The emission intensity of the fluorophore nitrobenzoxadiazoledipalmitoylphosphatidylethanolamine (NBD-PE) is sensitive to local environmental structure when this species is used as a component of a phospholipid membrane. The physical and electrostatic structure of a membrane may be modulated by selective chemical reactions, and the resulting alteration in fluorescence intensity provides transduction of such selective chemical processes. One example is the reaction between the extrinsic membrane-associated enzyme acetylcholinesterase (AChE) and the substrate acetylcholine (ACh), which produces an increase in hydronium ion activity at the surface of a lipid membrane. A mechanism of transduction of the enzymatic reaction by lipid monolayer membranes was investigated by spectrofluorimetric methods and fluorescence microscopy. Mixed monolayers composed of dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidic acid (DPPA) which contained 30 mol-% or more of DPPA and 1 mol-% of NBD-PE provided transduction of the AChEACh reaction. Reaction of micromolar concentrations of ACh with AChE-monolayer systems induced increases in fluorescence intensity of up to 50%. Direct observation of the microscopic structure of lipid monolayers on a time scale of minutes showed that the reaction did not drastically affect the distribution of coexisting microscopic phase domains that were present in the monolayers The fluorescence imaging and spectroscopic results did indicate that massive structural reorganization at a molecular level probably occurred in a period of seconds. The results are consistent with an electrostatic mechanism of perturbation of the structure of the monolayer in which local pH gradients associated with the reaction of AChE with substrate altered the extent of ionization of DPPA in the headgroup zone of the membrane.     

Rapid flow injection electrochemical detection of 3,3′,4,4′ tetrachlorobiphenyl using stabilized lipid membranes with incorporated sheep antibody

An electrochemical biosensor based on a supported polymerized lipid film with incorporated sheep anti-3,3′,4,4′ tetrachlorobiphenyl (PCB congener 77) antibody using flow injection analysis was developed. The polymerized lipid film contained 85% (w/w) dipalmitoylphosphatidylcholine (DPPC) and 15% (w/w) dipalmitoylphosphatidic acid (DPPA), methacrylic acid, ethylene glycol dimethacrylate, AIBN and sheep anti-congener 77 antiserum. Congener 77 was injected into flowing carrier electrolyte and the flow stopped to detect the antigen. These membranes gave only a single transient proportional to log [congener 77] from 10^?8 to 10^?5 M, with a detection limit of ca. 10^?8 M. A membrane containing 35% (w/w) DPPA was used to examine regeneration. The maximum number of cycles was about 5.      

Reduced fluidity of dipalmitoyl phosphatidic acid membranes by salicylic acid

This paper presents DSC and NMR study of how the kerotolytic drug, salicylic acid (SA), affects the thermotropic and morphological behavior of a model membrane, dipalmitoyl phosphatidic acid (DPPA). The membrane-drug system has been studied in the multilamellar vesicular (MLV) and in the unilamellar vesicular (ULV) forms, for SA/DPPA molar ratios from 0 to 0.5. The mode of interaction of SA molecules with DPPA is similar in MLV and ULV. Chain-melting transition becomes sharper and shifts to higher temperatures in the presence of the drug, implying an enhanced co-operativity of the acyl chains. NMR and DSC data indicate that the drug molecules are located in the aqueous interfacial region neighboring the lipid headgroups. The membrane becomes more rigid in the presence of the drug molecules, due to a stronger interaction between the lipid headgroups leading to reduced permeability. ULVs are destroyed by even a short equilibration at room temperature, whereas prolonged equilibration of the MLV only leads to a slightly reduced interaction between the lipid headgroups due to sequestering of the drug molecules in the interfacial aqueous region.     

Continuous,on-demand generation and separation of diphenylphosphoryl azide

Diphenylphosphorylazide (DPPA) has been synthesized in microfluidics with near-100% yield in sub-3 minute residence time, affordably, and with a process design that minimizes hazards associated with hydrazoic acid (HN₃) production. A pilot-plant scale continuous process for the on-demand synthesis of diphenylphosphoryl azide (DPPA) that can readily be integrated with subsequent transformations was designed, built, and validated. Using Corning's Low Flow reactor system coupled to a membrane separator and in-line Fourier Transform Infrared (FTIR), DPPA was safely produced at a rate of 1?mol/hr as a 2.0?M anhydrous toluene stream. Continuous FTIR was able to reliably monitor product quality, purity and concentration, showcasing the ease and utility of this continuous flow process for manufacturing common, safe pharmaceutical precursors.     

β-lactoglobulin 与磷脂复合膜形成过程中相互 作用的动态研究

利用ADSA系统分别研究了蛋白质β-lactoglobulin在不同pH下与三种磷脂DPPC(中性头部基因)、DPPE(部分正电头部基团)、DPPA(部分带负电头部基因)的吸附动力学,结合AFM技术,讨论在弯曲的液/液界面上蛋白质与磷脂之间各种相互作用对复合膜生成的影响。认为这些相互作用的影响是动态变化着的;在吸附反应的不同阶段各类作用分别成为主导因系。     

Evaluation of antitubercular drug insertion into preformed dipalmitoylphosphatidylcholine monolayers

Insertion profiles of antitubercular drugs isoniazid (INH), rifampicin (RFM) and ethambutol (ETH) into dipalmitoylphosphatidylcholine (DPPC) membrane models were evaluated by Langmuir monolayer technique. Maximum drug insertion into DPPC monolayer was observed with rifampicin with a surface pressure increase (Δπ_max) in the range of 21–33 mN/m depending upon rifampicin concentration. Isoniazid had minimal insertion resulting in a lower Δπ_max of about 2–3 mN/m, suggestive of minimal interactions between INH and DPPC. Ethambutol surface pressure increment on insertion resulted in an intermediate rise in the Δπ_max (6–10 mN/m). Antitubercular drug combination in the ratio of 2 mM:0.7 mM:4.5 mM for INH:RFM:ETH, attained Δπ_max between 25 and 33 mN/m. Insertion profiles similar to rifampicin were exhibited by the antitubercular drug mixture suggestive of predominant rifampicin insertion into the DPPC monolayer. The extent of drug insertion into the DPPC monolayer is suggestive of the drug penetration potential into biological membranes in vivo. Higher RFM Δπ_max is suggestive of excellent cell membrane penetration, which explains broad reach of the drug to all the organs including the cerebrospinal fluid while lower Δπ_max of INH suggests poor membrane penetration restricting the entry of the drug in different biological membranes. DPPC membrane destabilization was observed at higher antitubercular drug concentrations indicated by the negative slopes of the surface pressure–time curves. This may correlate with the dose related toxic effects observed in tuberculosis affected patients. Drug insertion studies offer a potential tool in understanding the pharmacotoxicological behavior of the various pharmacological agents.     

HETEROAROMATIC POLYMERS — HIGH TEMPERATURE POLYPYRROLONES DERIVED FROM 2,6-BIS(3'',4''-DIAMINOPHENYL)-4-BIPHENYLPYRIDINE AND VARIOUS AROMATIC DIANHYDRIDES

A new type of aromatic tetraarnine containing biphenyl moiety in the side chain was synthesized via a modified Chichibabin＇s reaction. 3-Nitro-4-acetamidoacetophenone was reacted with 4-phenyl benzaldehyde in the presence of ammonium acetate to obtain 2,6-bis（3＇,4＇-diaminophenyl）-4-biphenyl pyridine （DPPA）. A series of polypyrrolones （PPys） were prepared using tetraamine and various aromatic dianhydrides via a two-step cyclization procedure. All the PPys show excellent high temperature stabilities with the initial decomposition temperatures of 530-549℃ and residual weight ratio of 49%-80% at 750℃ in nitrogen. The polymers exhibit no apparent glass transition temperatures （Tgs） except PPy-1 （Tg= 327℃）, which is derived from tetraamine DPPA and 2,2-bis[4-（3＇,4＇-dicarboxyphenoxy）-phenyl]propane dianhydride （BPADA）. In addition, the polymers have acceptable mechanical properties with the tensile strength of 65-94 MPa. The PPy films show excellent hydrolysis-resistance in alkaline aqueous medium and could maintain most of the properties even after boiling in 10% aqueous sodium hydroxide solution for a week.