Polarography of disodium pentacyanonitrosylferrate(II): Part 2. Determination at Therapeutic Levels in Serum,Plasma, and Whole Blood

Disodium pentacyanonitrosylferrat(II) (sodium nitroprusside) is determined at therapeutic (ng ml^?1) levels in plasma, serum and blood with conventional and high-performance differential pulse polarography (d.p.p. and h.p.d.p.p.) at a dropping mercury electrode or a static mercury drop electrode. Serum or plasma (3 ml) is treated with perchloric acid containing 1 mg ml^?1 potassium hexacyanoferrate(II), centrifuged for 10 min and subjected to polarography. For spiked serum, calibration graphs are linear over the range 30–1000 ng ml^?1 sodium nitroprusside, regardless of the polarographic technique; the estimated detection limit is 15 ng ml^?1 (5 × 10^?8 M). Calculated therapeutic levels range from 100 to 1000 ng ml^?1. Similar results were obtained for spiked plasma. A similar procedure is suitable for whole blood and was used to study the in-vitro degradation of sodium nitroprusside (200 ng ml^?1) on incubation at 37°C. The in-vitro loss is rapid (t_{$\text{1}\text{2}$} ≈ 6 min) but meaningful in-vivo levels can be obtained when the blood is collected in a 0.9% sodium chloride solution at 0°C. Thiocyanate, the main metabolite of nitroprusside, and thiosulphate, which is a potential antidote for cyanide, do not interfere.     

Colorimetric Determination of Propofol in Bulk form,Dosage Form and Biological Fluids

ABSTRACT

Propofol is coupled with 2, 6-dichloroquinone-4-chlorimide (DCQ) in a reaction buffered at pH 9.6 to give a colored product having an analytically useful maximum at 635 nm. The factors affecting the color generation were optimized and incorporated in the procedure. The reacted propofol has a molar absorptivity of 3.9 × 10^?4 L mol^?1 cm^?1, and Beer's law is obeyed for concentrations 1-5 μg ml^?1 with detection limit 0.25 μg ml^?1. The method was found applicable to biological fluids (plasma and urine) spiked with propofol at concentration levels 1-5 μg ml^?1 for plasma and 1-5 μg 0.5 ml^?1 urine (less sensitivity is obtained with urine volumes above 0.5 ml) with detection limits 0.28 μg ml^?1 for plasma and 0.4 μg 0.5 ml^?1 urine. The average recovery for the commercial preparation (1% w/v propofol emulsion intravenous injection for infusion) was 99.54% with an RSD of 1.05%. The method was validated by an adopted HPLC method. The results obtained by the HPLC method for the commercial preparation were statistically compared with the proposed method and evaluated at the 95% confidence limits.     

Differential pulse polarographic determination of traces of iron in solar-grade silicon

Iron is determined, after volatilization of the matrix as hexafluorosilicic acid, by means of the polarographic iron(III) wave in a 0.1 M triethanolamine—0.1 M potassium bromate—0.5 M sodium hydroxide medium. Differential pulse polarography provides a detection limit of about 0.15 μg g^-1 with a precision of 1–2% and linear calibration graphs up to 0.5 μg Fe(III) ml^-1.     

The determination of chromium(VI) in natural waters by differential pulse polarography.

A method utilizing differential pulse polarography for the determination of chromium(VI) in natural water is described. Additions of 0.62 μg Cu(II) ml^-1 and 0.55 μg Fe(III) ml^-1 did not interfere with the determination of 0.050 μg Cr(VI) ml^-1. The natural water samples containing chromium(VI) were buffered to approximately pH 7 with 0.1 M ammonium acetate and 0.005 M ethylene diamine and analyzed. Natural water samples of chromium content from 0.035 μg ml^-1 to 2.0 μg ml^-1 may be analyzed directly without further preparation. The detection limit is 0.010 μg ml^-1.     

Electroreduction and pulse-polarographic determination of nicotinamide in multivitamin tablets

The electroreduction of nicotinamide has been investigated by d.c., a.c. and pulse polarography, cyclic voltammetry and coulometry. A single well-defined polarographic wave is obtained from 2 M sulphuric acid and from 0.1 M sodium hydroxide. In both media, nicotinamide undergoes an irreversible 2-electron reduction; 3 hydrogen ions are consumed in acidic medium and two hydrogen ions in alkaline medium. The current is diffusion-controlled and proportional to the concentration in the range 0.6–120 μg ml^?1. Reduction mechanisms are proposed. A simple and rapid method for the determination of nicotinamide in multivitamin tablets by differential pulse polarography is described.     

Polarographic Determination of Subnanogram Quantities of Free Platinum in Reaction Mixture with Dna

Abstract

A simple and rapid differential pulse polarographic assay for measurement of platinum drug binding to DNA is described. The method makes it possible to determine the free (unbound) platinum compound in the presence of DNA or platinum - DNA complex. The method is based on the polarographic catalytic hydrogen current yielded by platinum (II) or (IV) complexes in formaldehyde - hydrazine - sulphuric acid background electrolyte, in which DNA or platinum - DNA complex precipitate. The lower level of analytical utility of this method is c. 1 × 10^?9 M.     

The determination of phenobarbital and diphenylhydantoin in blood by differential pulse polarography

A sensitive differential pulse polarographic assay was developed for the determination of phenobarbital or diphenylhydantoin in blood. The assay involves the selective extraction of the compound into chloroform from whole blood buffered to pH 7.0. After suitable “clean-up” of the sample, each compound is nitrated in 10% potassium nitrate in sulfuric acid at 25° for 1 h. The nitro-derivatives are extracted into ethyl acetate, and the residues are dissolved in 1 M phosphate buffer (pH 7.0) or 0.1 M sodium hydroxide for phenobarbital and diphenylhydantoin, respectively; the solutions are deoxygenated, and analyzed by differential pulse polarography. The overall recovery of phenobarbital and diphenylhydantoin from blood was 72.3% ±6.5 (s_r) and 76.7 ±2.3 (s_r) respectively. The sensitivity limit is 1–2 μg ml^-1 of blood for both compounds. A modified assay for the determination of both compounds in blood with t.l.c. separation was also developed.     

Thin-layer differential pulse voltammetric determination of chlorpromazine in biological fluids

The combination of a thin-layer electrochemical cell with differential pulse voltammetry can be used to determine chlorpromazine in plasma and urine. The thin-layer cell (23 μl capacity) has a wax-impregnated graphite electrode. Direct determination of chlorpromazine in urine gave a linear calibration curve for the range 4.8 × 10^-3–2.4 × 10^-4 M with 97% recovery. No interference from glutethimide, dextropropoxyphene, meprobamate, diazepam, and methaqualone-HCl was detected. Direct measurement of chlorpromazine in plasma gave a linear calibration curve for the range 2.4 × 10^-5–4.8 × 10^-4 M with 89% recovery. The procedure for plasma and urine requires only 2 min per determination. Detection levels are below that required for monitoring therapeutic levels of chlorpromazine in urine.     

Polarographic study of 1-methyl-5-o-chloropheyl-7- ethyl-1,2-dihydro-3H-thieno[2,3-e],[1,4]-diazepin-2-one (clotiazepam)

The electroeducation of 1-methyl-5-o-chlorphenyl-7-ethyl-1,2-dihydro-3H-thieno[2,3-e],[1,4]-diazepin-2-one (Clotiazepam) is investigated by different polarographic techniques. The electrochemical reactioninvolves a 2-electron exchange in both acidic and alkaline media. The reduction process is irreversible and the current is diffusion-controlled. With differential pulse polarography, the linear response range is 6.5 × 10^-7— 1.10 × 10^?5 M, with a relative standard deviationof 1.2% at the 2.6 × 10^?6 M level. The method is applied to the determinationof Clotiazepam in tablets after simple dissolution in 0.1 M sulphuric acid.     

Voltammetric determination of agriculturally-significant benzenearsonic acids

Direct current and differential pulse polarographic measurements are reported on a series of substituted benzenearsonic acid compounds that are important in agricultural applications. Compounds studied were o-aminobenzenearsonic acid, p-aminobenzene-arsonic acid, p-nitrobenzenearsonic acid, p-ureidobenzenearsonic acid, and 3-nitro-4-hydroxybenzenearsonic acid. Polarographic reduction potentials varied with pH for all compounds, shifting to more negative values as the pH was increased. Although diffusion-controlled reduction waves were observed in all cases, some compounds exhibited a dependence of E$\text{1}\text{2}$ on concentration, especially at relatively high concentrations. Differential pulse polarographic peak currents were proportional to concentration from 10^-4 M to 10^-6 M.     

Direct current and differential pulse polarographic behaviour of benzylpenicilloic acid

The differential pulse and direct current polarographic behaviour of benzylpenicilloic acid (BPA) is discussed. In pH 9.2 borate buffer, the single anodic wave (E_{$\text{1}\text{2}$} = -0.25 V) obtained is diffusion-controlled at concentrations less than 2 × 10^-5 M but adsorptioncontrolled in 10^-4 M solution. Cyclic voltammetry at a hanging mercury drop electrode shows that the electrode reaction is reversible at pH 9.2. The differential pulse peak current is linearly related to concentration in the range 10^-6—2 × 10^-5 M. Penicillamine yields an anodic peak well separated from the BPA peak. Both substances may be determined in each other's presence. Intact penicillin decreases the BPA peak but the linearity between i_p and BPA concentration is maintained.     

A polarographic and spectral study of some C- and N-nitroso compounds.

A wide range of N-nitroso compounds was investigated polarographically and spectrophotometrically. In general, the =N-N0 group is reduced in a 4-electron step in acidic media, which is most suitable for differential pulse polarographic analysis at the trace level. If the groups R and/or R' attached to the nitrosamine group are saturated entities, then the resulting differential pulse polarographic peaks are broad and of little use in the resolution of mixtures. The limit of detection is of the order of 10^-6M. If R and R' are unsaturated, the polarographic peaks are much sharper, mixtures can be resolved and the limit of detection is of the order of 10^-7M, C-Nitroso and C-nitro compounds are best determined by differential pulse polarography, because the waves are comparatively large and sharp, and because the reductions occur at relatively positive potentials where co-extractible interferences from foods, etc., will interfere to a minimal degree.     

Determination of chloramphenicol at ultra-trace levels by high-performance differential pulse polarography: Application to Milk and Meat

High-performance differential pulse polarography (h.p.d.p.p.) is used to determine the antibiotic chloramphenicol. Optimum operating conditions are discussed. Calibration curves are linear from 10 ng ml^-1 to 1 μg ml^-1; the detection limit is about 3 ng ml^-1. Above 1 μg ml^-1, deviations from linearity occur, because of adsorption of chloramphenicol at the mercury electrode. A correction, based on variations in natural drop time, is suggested. Chloramphenicol is readily extracted from milk or minced meat with diethyl ether. The ether is evaporated, and the residue is taken up in acetate buffer pH 4.7 and filtered through a membrane filter. Recoveries from samples fortified at levels of 10–1000 ng ml^-1 are about 60% for milk and 50% for minced meat.     

Enoxacin: Polarographic Behaviour and Its Determination in Pharmaceutical Forms

Abstract

A differential pulse polarographic method for the identification and quantitative determination of enoxacin is described. The method is based on the electrochemical reduction of the drug at the dropping mercury electrode. It gives a well-developed polarographic response with a half-wave potential of -990 mV vs. SCE in 0.1 M HCl. The electroactive specie exhibits a diffusion-controlled polarographic wave and its limiting current shows a linear dependence with the enoxacin concentration in the range between 5.10^?4 mM and 1 mM. This characteristic is applied for determination of enoxacin in commercial tablets. The recovery study shows a good accuracy and precision for the developed assay (average of 101.1% and standard deviation of 1.99). Furthermore, a comparative UV spectrophotometric assay also is developed.     

The application of 2,4,6-trinitrobenzene-1-sulphonic acid in the differential pulse polarographic determination of amines

The differential pulse polarographic behaviour of 2,4,6-trinitrophenyl (TNP) derivatives of several primary amines and amino acids was investigated in the presence of sulphite ion. All the derivatives produced a polarographic peak for their complexes with sulphite (1 × 10^?2 M) in pH 8.0 phosphate buffer (0.05 M)/0.1 M potassium chloride. The derivatives of proteins and peptides did not give such a peak. A 5-min reaction time at room temperature (or 50°C for lysine) and pH 10.5 using 1 × 10^?4 M 2,4,6-trinitrobenzene-1-sulphonic acid provides the optimal conditions for the determination of 5 × 10^?6?2.5 × 10^?5 M amines. The relative standard deviation for determining 1 × 10^?5 M glycine (n = 5) was 1%.     

Determination of mitomycin C in human blood plasma and urine by high-performance differential pulse polarography

High-performance differential pulse polarography is used for determining the antitumor antibiotic mitomycin C in human blood plasma and urine. The limit of determination (2-ml samples) is 25 ng ml^?1 when the substance is isolated by means of Amberlite XAD-2, and 200 ng mo_?1 when samples are not pretreated. The method was applied in a pharmacokinetic experiment; no metabolites of mitomycin C were observed in urine or plasma.     

A new polarographic response for ethynyloestradiol and its application to electrochemical detection associated with reverse-phase liquid chromatography

Mercury electrodes are oxidized in the presence of ethynyloestradiol, a synthetic steroid. The direct polarographic response obtained is based on the formation of an insoluble mercury compound. In analytical applications of this response, interference from laevonorgestrel, which is found in extracts from combined oral contraceptives, renders the direct determination of ethynyloestradiol impossible. However, reverse-phase liquid chromatography provides separation of the two steroids prior to electrochemical detection of both species at either static or dropping mercury electrodes. Linear response is obtained for 2.5–15.0 μg ml^-1 ethynyloestradiol and 12.5–50 μg ml^-1 laevonorgestrel with 20-μl injections. A microprocessor-based waveform generator is used to optimize the electro-chemical detection. The method is applied to pharmaceutical formulations; the data obtained agree satisfactorily with the nominal contents. Cathodic stripping voltammetry is briefly investigated for very low levels of ethynyloestradiol; the detection limit is around 5 × 10^-9 M on standard solutions.     

Polarographic and Voltammetric Assays of Sulfonamides as α‐Oxo‐γ‐Butyrolactone Arylhydrazones

Abstract

2‐Acetylbutyrolactone was characterized as a novel reagent of analytical potential in polarographic and voltammetric analyses. It forms α‐oxo‐γ‐butyrolactone arylhydrazones through Japp‐Klingemann coupling reaction with primary arylamines. α‐Oxo‐γ‐butyrolactone arylhydrazones possess an electro‐active site (azomethine center) that displays a cathodic activity at the mercury electrode. The protonated azomethine center of α‐oxo‐γ‐butyrolactone arylhydrazones is reduced by 2e/2H⁺ reaction to the hydrazo form. The differential pulse polarographic behavior of α‐oxo‐γ‐butyrolactone arylhydrazones was investigated in aqueous media ranging from pH 2 to 10.5. In aqueous acidic solution, α‐oxo‐γ‐butyrolactone arylhydrazones were shown to adsorb on a hanging mercury drop electrode and to be amenable to determination by adsorptive stripping voltammetry. Procedures for applying the polarographic and voltammetric methods to determination of sulfadiazine and sulfamethoxazole in pharmaceutical preparations have been developed. An analogous study on sulfas‐azo derivatives of ethyl acetoacetate was also considered. Furthermore, the differential pulse voltammetric method was adopted for determination of sulfamethoxazole in spiked plasma and urine samples. The recoveries turned out to be satisfactory, showing relative standard deviations from 2.4 to 4.6%.     

Determination of trace amounts of nickel by differential pulse adsorptive cathodic stripping voltammetry using calconcarboxylic acid as a chelating agent

A method for the determination of nickel(II) by stripping voltammetry is described. The method is based on the adsorptive accumulation of nickel(II) calconcarboxylic acid complex onto a hanging mercury drop electrode (HMDE), followed by the reduction of the adsorbed complex using differential pulse voltammetry. The optimum operating conditions and parameters were found to be 0.05 M NH₃/NH₄Cl buffer (pH = 9.5) as the supporting electrolyte, a ligand concentration of 1 × 10^?6 M, accumulation potential of ?0.5 V (vs. Ag/AgCl) and accumulation time of 60 s. At the optimized conditions, the peak current is proportional to the concentration of nickel in the range of 1.7 × 10^?9 to 4.7 × 10^?7 M (0.1–28 ng ml^?1) with a detection limit of 0.05 ng ml^?1. The relative standard deviation (n = 10) at nickel concentrations of 2, 10 and 15 ng ml^?1 varies in the range 0.76 to 2.1%. Possible interferences by metal ions, which are of great significance in real matrices, have been studied. The method was successfully applied to the determination of nickel content in a chocolate sample.     

Determination of pseudouridine at submicromolar concentrations by cathodic stripping voltammetry at a mercury electrode

Pseudouridine (5-ribosyluracil), uridine (N,1-ribosyluracil), deoxyuridine (N,1-deoxyribosyluracil) and uracil are investigated by means of d.c. polarography and by differential and normal pulse polarography. Pseudouridine, which is known to be a cancer marker, yields anodic polarographic currents in the pH range 7–11, whereas uridine and deoxyuridine are inactive under the same conditions. The polarographic response of pseudouridine obtained is due to the formation of a sparingly soluble mercury compound. Pseudouridine can be determined by differential pulse polarography in the concentration range 2–6 × 10^?6 M and by differential-pulse cathodic stripping voltammetry at concentrations two orders of magnitude lower. Small excesses of uridine, deoxyuridine or proteins do not interfere with the determination.