Air-water interfacial behavior of linear-dendritic block copolymers containing PEG and azobenzene chromophores

Fabrication of Langmuir films at the air-water interface of four linear-dendritic block copolymers (LDBCs) is described. The LDBCs are composed of a linear hydrophilic chain of poly(ethylene glycol) (PEG) and the first four generations of hydrophobic aliphatic polyester dendrons functionalized at the periphery with cyanoazobenzene chromophores. Langmuir films of the LDBCs, coded as PEG-AZOn (n indicates the number of cyanoazobenzene units at the periphery of the dendritic block), have been characterized by a combination of surface pressure versus area per molecule isotherms, UV-vis reflection spectroscopy and Brewster angle microscopy. The observed PEG-AZOn Langmuir film behavior depends strongly on the hydrophilic/hydrophobic ratio. A typical transition, related to PEG chains desorption from the air-water interface into the water subphase is observed for all the LDBCs, except for PEG-AZO16. In addition, PEG-AZO2 and PEG-AZO4 show a second transition whose nature has been studied in detail. Azobenzene chromophore interactions have been shown to be relevant in the organization of PEG-AZOn (n=4, 8 and 16) Langmuir films. Moreover, for PEG-AZO16 the orientation of the azobenzene units has been determined, revealing the formation of a well organized structure of azobenzene moieties at the air-water interface.     

Preparation of ordered films containing a phenylene ethynylene oligomer by the Langmuir-Blodgett technique

This paper reports the fabrication and characterization of Langmuir and Langmuir-Blodgett (LB) films incorporating an oligo(phenylene-ethynylene) (OPE) derivative, namely, 4-[4-(4-hexyloxyphenylethynyl)-phenylethynyl]-benzoic acid (HBPEB). Conditions appropriate for deposition of monolayers of HBPEB at the air-water interface have been established and the resulting Langmuir films characterized by a combination of surface pressure and surface potential versus area per molecule isotherms, Brewster angle microscopy, and ultraviolet reflection spectroscopy. The Langmuir films are readily transferred onto solid substrates, and one-layer LB films transferred at several surface pressures onto mica substrates have been analyzed by means of atomic force microscopy, from which it can be concluded that 14 mN/m is an optimum surface pressure of transference, giving well-ordered homogeneous films without three-dimensional defects and a low surface roughness. The optical and emissive properties of the LB films have been determined with significant blue-shifted absorption spectra indicating formation of two-dimensional H aggregates and a Stokes shift illustrating the effects of the solid-like environment on the molecular chromophore.     

Synthesis and supramolecular self-assembly study of a novel porphyrin molecule in Langmuir and Langmuir-Blodgett films

The self-assembly and supramolecular engineering of porphyrins into ordered arrays have recently attracted much interest because of their promising application potential in molecular and electronic devices, spintronics, energy harvesting and storage, catalysis, and sensor development. We herein report the synthesis and supramolecular self-assembly study of a novel porphyrin molecule, 2Por-TAZ, in Langmuir and Langmuir-Blodgett films. The 2Por-TAZ molecule contains two porphyrin macrocycles attached to a triaminotriazine headgroup. Triaminotriazines are known to form a highly ordered linear supramolecular self-assembly through complementary hydrogen bonding with barbituric acid molecules at the air-water interface. Surface pressure-area isotherm measurements and polarized UV-vis absorption spectroscopic studies indicate that the 2Por-TAZ molecules adopted an edge-on orientation at the air-water interface. Polarized UV-vis absorption study also revealed that the 2Por-TAZ molecules formed linear supramolecular networks on pure water and barbituric acid subphase with porphyrin flat planes facing toward the compression direction. The binding of barbituric acid with 2Por-TAZ molecules was observed from the expansion of the Langmuir monolayer film. Compared to the transferred LB film from pure water subphase, both the UV-vis absorbance and fluorescence emission intensity of the LB film transferred from barbituric acid subphase increased significantly.     

Structural characterization and properties of an azopolymer arranged in Langmuir and Langmuir-Blodgett films

The fabrication of Langmuir and Langmuir-Blodgett (LB) films of an acid-azopolymer (PAzCOOH) is reported. Several techniques were used in their characterization: surface pressure (pi) and surface potential (DeltaV) isotherms, UV-vis reflection spectroscopy, and Brewster angle microscopy (BAM) for the Langmuir films and contact angle measurements, UV-vis, fluorescence, IR and Raman spectroscopy and scanning electronic microscopy (SEM) for the LB films. Our study reveals that lateral chains of the polymer situate preferentially onto the water surface with the acid group in contact with the water, where aggregates are scarcely formed. Therefore, the lateral chains of PAzCOOH can be treated as individual monomers to determine structural properties of the fabricated Langmuir and LB films. Monomeric treatment has been used to interpret UV-vis reflection spectroscopy, and a monomer model has been performed to represent lateral chains using density functional theory at B3LYP 6-31G(d,p) level of theory to assign the observed vibrational spectra.     

Formation of complex Langmuir and Langmuir-Blodgett films of water soluble rosebengal

This communication reports the formation of complex Langmuir monolayer at the air-water interface by charge transfer types of interaction with the water soluble N-cetyl N,N,N-trimethyl ammonium bromide (CTAB) molecules doped with rosebengal (RB), with the stearic acid (SA) molecules of a preformed SA Langmuir monolayer. The reaction kinetics of the formation of RB-CTAB-SA complex monolayer was monitored by observing the increase in surface pressure with time while the barrier was kept fixed. Completion of interaction kinetics was confirmed by FTIR study. This complex Langmuir films at the air-water interface was transferred onto solid substrates at a desired surface pressure to form multilayered Langmuir-Blodgett films. Spectroscopic characterizations reveal some molecular level interactions as well as formation of microcrystalline aggregates depending upon the molar ratios of CTAB and RB within the complex LB films. Presence of two types of species in the complex LB films was confirmed by fluorescence spectroscopy.     

Phthalocyanines in Langmuir and Langmuir-Blodgett films: from molecular design to supramolecular architecture

A short review is given on Langmuir and Langmuir-Blodgett films containing phthalocyanine derivatives. A particular emphasis is directed towards the molecular parameters that can be clearly related to the supramolecular architecture observed at the air-water interface and within the LB multilayers. Several examples concerning both edge-on and flat-lying phthalocyanine derivatives are discussed.     

Preparation and characterization of mono- and multilayer films of polymerizable 1,2-polybutadiene using the Langmuir-Blodgett technique

The essence of this study is to apply the Langmuir-Blodgett (LB) technique for assembling asymmetric membranes. Accordingly, Langmuir films of a (further) polymerizable polymer, 1,2-polybutadiene (1,2-pbd), were studied and transferred onto different solid supports, such as gold, indium tin oxide (ITO), and silicon. The layers were characterized both at the air/water interface as well as on different substrates using numerous methods including cyclic voltammetry, impedance spectroscopy, spectroscopic ellipsometry, atomic force microscopy, X-ray photoelectron spectroscopy, and reflection-absorption Fourier transform infrared spectroscopy. The Langmuir films were stable at the air-water interface as long as they were not exposed to UV irradiation. The LB films formed disorganized layers, which gradually blocked the permeation of different species with increasing the number of deposited layers. The thickness was ca. 4-7 ? per layer. Irradiating the Langmuir films caused their cross-linking at the air-water interface. Furthermore, we took advantage of the reactivity of the double bond of the LB films on the solid supports and graft polymerized acrylic acid on top of the 1,2-pbd layers. This approach is the basis of the formation of an asymmetric membrane that requires different porosity on both of its sides.     

Directionally oriented LB films of an OPE derivative: assembly, characterization, and electrical properties

Langmuir films have been fabricated from 4-[4'-(4'-thioacetyl-phenyleneethynylene)-phenyleneethynylene]-aniline (NOPES) after cleavage of the thioacetyl protecting group. Characterization by surface pressure vs area per molecule isotherms and Brewster angle microscopy reveal the formation of a high quality monolayer at the air-water interface. One layer Langmuir-Blodgett (LB) films were readily fabricated by the transfer of the NOPES Langmuir film onto solid substrates. X-ray photoelectron spectroscopy (XPS), surface polarization-modulated infrared reflection-absorption spectroscopy (PM-IRRAS), and quartz crystal microbalance (QCM) experiments conclusively demonstrate the formation of one layer LB films in which the functional group associated with binding to the substrate can be tailored by the film transfer conditions. Using LB methods this molecule could be transferred to gold samples with either the amine or thiol group attached to the gold surface. The amine group is directly attached to the gold substrate (Au-NH(2)-OPE-SH) when the substrate is initially immersed in the subphase and withdrawn during the transfer process; in contrast, monomolecular films in which the thiolate group is attached to the gold substrate (Au-S-OPE-NH(2)) are obtained when the substrate is initially out of the subphase and immersed during the transfer process. The morphology of these films was analyzed by atomic force microscopy (AFM), showing the formation of homogeneous layers. Film homogeneity was confirmed by cyclic voltammetry, which revealed a large passivation of gold electrodes covered by NOPES monolayers. Electrical properties for both polar orientated junctions have been investigated by scanning tunnelling microscopy (STM), with both orientations featuring a nonrectifying behavior.     

Fabrication, structural characterization, and applications of langmuir and langmuir-blodgett films of a poly(azo)urethane

The synthesis of a poly(azo)urethane by fixing CO(2) in bis-epoxide followed by a polymerization reaction with an azodiamine is presented. Since isocyanate is not used in the process, it is termed "clean method" and the polymers obtained are named "NIPUs" (non-isocyanate polyurethanes). Langmuir films were formed at the air-water interface and were characterized by surface pressure vs mean molecular area per mer unit (Pi-A) isotherms. The Langmuir monolayers were further studied by running stability tests and cycles of compression/expansion (possible hysteresis) and by varying the compression speed of the monolayer formation, the subphase temperature, and the solvents used to prepare the spreading polymer solutions. The Langmuir-Blodgett (LB) technique was used to fabricate ultrathin films of a particular polymer (PAzoU). It is possible to grow homogeneous LB films of up to 15 layers as monitored using UV-vis absorption spectroscopy. Higher number of layers can be deposited when PAzoU is mixed with stearic acid, producing mixed LB films. Fourier transform infrared (FTIR) absorption spectroscopy and Raman scattering showed that the materials do not interact chemically in the mixed LB films. The atomic force microscopy (AFM) and micro-Raman technique (optical microscopy coupled to Raman spectrograph) revealed that mixed LB films present a phase separation distinguishable at micrometer or nanometer scale. Finally, mixed and neat LB films were successfully characterized using impedance spectroscopy at different temperatures, a property that may lead to future application as temperature sensors. Principal component analysis (PCA) was used to correlate the data.     

Langmuir-Blodgett films of 9-phenyl anthracene molecules incorporated into different matrices

This communication reports the surface pressure (pi) versus area per molecule (A) isotherm characteristics of the mixed films of 9-phenyl anthracene (PA) in stearic acid (SA) and polymethyl methacrylate (PMMA) matrices, at the air-water interface. The mixed Langmuir films at the air-water interface have been observed to be easily transferred onto solid substrates to form uniform Langmuir-Blodgett films. By changing various parameters, namely molefraction, surface pressure of lifting and number of layers, the mixed Langmuir-Blodgett (LB) films of various types have been fabricated successfully and their spectroscopic characteristics have been reported. From the isotherm characteristics and the area per molecule versus molefraction plot, it is evident that the PA molecules are successfully incorporated into mixed Langmuir-Blodgett films. UV-vis absorption spectroscopic study of the mixed LB films at various molefractions of PA in two different matrices reveal that formation of I-type aggregate in PMMA matrix whereas both I- and H-type aggregates are playing their dominant role in SA matrix. Moreover, fluorescence spectroscopic study reveals reabsorption effect. Molecular movement persists in the freshly prepared LB films, as is evident from the time dependent changes in both UV-vis absorption and fluorescence spectra of the mixed LB films in both matrices. From our observation it is evident that about 200 h is required to get the LB films in a stable condition. Dimers and higher order n-mers are formed at a higher surface pressure of 30 mNm(-1).     

Pure and mixed films of a nitrostilbene derivative at the air-water interface, Langmuir-Blodgett multilayer fabrication, and optical characterization

This paper reports the preparation and characterization of pure Langmuir and Langmuir-Blodgett (LB) films of a stilbene derivative containing two alkyl chains, namely 4-dioctadecylamino-4'-nitrostilbene. Mixed films incorporating docosanoic acid and the stilbene derivative are also studied. Brewster angle microscopy (BAM) analysis has revealed the existence of randomly oriented three-dimensional (3D) aggregates, spontaneously formed immediately after the spreading process of the stilbene derivative onto the water surface. These 3D aggregates coexist with a Langmuir film that shows the typical gas, liquid, and solid-like phases in the surface pressure and surface potential vs area per molecule isotherms, indicative of an average preferential orientation of the stilbene compound at the air-water interface, and a gradual molecular arrangement into a defined structure upon compression. A blue shift of 55 nm of the reflection spectrum of the Langmuir film with respect to the spectrum of a chloroform solution of the nitrostilbene indicates that two-dimensional (2D) H-aggregates are formed at the air-water interface. The monolayers are transferred undisturbed onto solid substrates with atomic force microscopy (AFM) revealing that the one layer LB films are constituted by a monolayer of the stilbene derivative together with some 3D aggregates. When the nitrostilbene compound is blended with docosanoic acid, the 3D aggregation is avoided in the Langmuir and Langmuir-Blodgett films, but does not limit the formation of 2D H-aggregates, desirable for second-order nonlinear optical response in the blue domain. The AFM images of the mixed LB films show that they are formed by a docosanoic acid monolayer and, on the top of it, a bilayer of the stilbene derivative.     

Langmuir monolayers of an inclusion complex formed by a new calixarene derivative and fullerene

The design of new molecules with directed interactions to functional molecules as complementary building blocks is one of the main goals of supramolecular chemistry. A new p-tert-butylcalix[6]arene monosubstituted derivative bearing only one alkyl chain with an acid group (C6A3C) has been synthesized. The C6A3C has been successfully used for building Langmuir monolayers at the air-water interface. The C6A3C molecule adopts a flatlike orientation with respect to the air-water interface. The molecular structure gives the molecule amphiphilic character, while allowing the control of both the dissociation degree and the molecular conformation at the air-water interface. The C63AC has been combined with pristine fullerene (C60) to form the supramolecular complex C6A3C:C60 in 2:1 molar ratio (CFC). The CFC complex retains the ability of C6A3C to form Langmuir monolayers at the air/water interface. The interfacial molecular arrangement of the CFC complex has been convincingly described by in situ UV-vis reflection spectroscopy and synchrotron X-ray reflectivity measurements. Computer simulations complement the experimental data, confirming a perpendicular orientation of the calixarene units of CFC with respect to the air-water interface. This orientation is stabilized by the formation of intermolecular H-bonds. The interfacial monolayer of the CFC supramolecular complex is proposed as a useful model for the well-defined self-assembly of recognition and functional building blocks.     

三嵌段共聚物在气-液界面的有序组装

将氢化的苯乙烯(PS)/丁二烯(PB)/苯乙烯(PS)三嵌段共聚物(SEBS)磺化,得到磺化的SEBS(S－SEBS),在水亚相上铺展了S－SEBS的Langmuir膜,研究其π－A特性.制备S－SEBS的Langmuir－Blodgett(LB)膜,用原子力显微镜(AFM)对其表面形态进行了研究,并以芘作为荧光探针研究了溶液和膜中S－SEBS聚集态的变化.研究结果表明,S－SEBS在气－液界面可以形成由两亲性的纳米小球组装而成的有序的二维和三维的纳米结构.对纳米结构形成的机理进行了初步分析.     

Photo-induced structural changes of azobenzene Langmuir-Blodgett films

Structural changes of the Langmuir-Blodgett (LB) films of azobenzene accompanied by photoisomerization are described. First, photoisomerization is explained in terms of 'free volume'. In the polyion complex monolayers of amphiphiles having two azobenzene units at the air-water interface, the area per molecule depends on the polycation species. The fraction of cis-azobenzene in the LB films at the photostationary state under the illumination with UV light increased with increasing area per molecule, which is consistent with the concept of free volume. Second, a counter example of the concept of free volume is presented. Three-dimensional cone-shaped structures developed with trans-to-cis photoisomerization in the polyion complex LB film of a water-soluble amphiphilic azobenzene. These structures appeared and disappeared reversibly by alternate illumination with UV and visible light. The results indicate that the two-dimensional LB film structure exerts significant modification by photoisomerization. This is against the concept of free volume because this concept does not consider the possibility that the two-dimensional LB film structures may change into three-dimensional ones. Finally, photo-induced J-aggregate formation of non-photochromic and photochromic dyes is described. Two cyanine dyes were each mixed with an amphiphilic azobenzene in the LB films. These cyanine dyes are known to form J-aggregates in single-component LB films. In the mixed LB films, the J-aggregate formation was suppressed to some extent. The alternate illumination of the films with UV and visible light caused the photoisomerization of azobenzene in the mixed LB films, which triggered the J-aggregate formation of the cyanine dyes. The J-aggregate formation was accompanied by the development of three-dimensional cone-shaped structures from the film surface. When an amphiphilic merocyanine was mixed with the azobenzene in the LB films, J-aggregate formation was also induced by the alternate illumination with UV and visible light. This J-aggregate formation was also accompanied by a large morphological change: circular domains changed into fractal-like ones. The J-aggregate formation of the dyes and the concomitant morphological change were irreversible. In these cases, the photoisomerization of azobenzene served as a trigger to induce self-organization of the dye molecules.     

聚乙烯咔唑/杂多阴离子杂化LB膜的制备、结构与光电性质

首次选用聚乙烯咔唑（PVK）、二十二烷酸（BA）与杂多阴离子用LB技术制备 了五种有机/无机杂化LB膜，PVK/BA/HPC（HPC = Na_5(PZ(H_2O)Mo_(11)O_(39)]· 5H_2O, Z = Mn, Co, Cu, Zn, Ni）。用原子力显微镜（AFM），UV-vis，小角X射 线衍射（LAXRD），表面光电压谱（SPS），荧光光谱等对LB膜的结构与性质进行了 表征。结果表明：它们在空气/水界面有好的成膜性能，崩溃压为22 ～27 mN/m， 杂多阴离子作为一个单层夹在PVK和BA双层之间。PVK/BA/HPC LB膜的光致发光具有 PVK激基缔合物的特征荧光，其光电压谱有较强的光电响应。     

Formation, structure, and morphology of triazole-based Langmuir-Blodgett films

The formation, morphology, and structure of two-dimensional Langmuir-Blodgett (LB) assemblies of octadecyltriazole (ODT)-based metal-containing oligomers presenting, in the case of iron, the spin-crossover phenomenon is studied with Brewster angle microscopy, IR dichroism, X-ray diffraction, and atomic force microscopy. Two processes occurring at the air-water interface are confirmed to dominate the mechanism of formation of these LB films, the instability of the coordination polymers at the air-water interface and recoordination of metal ions in the subphase at the interface during the LB deposition process. The Langmuir film allowing the LB film formation is mostly made of ODT. The films do present a lamellar structure in which the ODT molecules are tilted and incorporate coordinated isolated metal ions and oligomers of metal ions. The morphology of the LB films is globally flat but with a rather high roughness resulting from inhomogeneities related to phenomena occurring during the LB film formation. These observations are in agreement with the relative affinity of the metal ions with ODT and the relative stability of the coordination polymers at the air-water interface, which have been determined for the group Cu-Fe-Co-Ni.     

Structural control in thin layers of poly(p-phenyleneethynylene)s: photophysical studies of Langmuir and Langmuir-Blodgett films

We present the relationship between the spatial arrangement and the photophysical properties of fluorescent polymers in thin films with controlled structures. Eight surfactant poly(p-phenyleneethynylene)s were designed and studied. These detailed studies of the behavior of the polymers at the air-water interface, and of the photophysical properties of their transferred LB films, revealed key structure-property relationships. Some of the polymers displayed pi-aggregates that are characteristic of an edge-on structure at the air-water interface. Monolayer LB films of these polymers showed greatly reduced quantum yields relative to solution values. Other polymers exhibited a highly emissive face-on structure at the air-water interface, and did not form pi-aggregates. The combination of pressure-area isotherms and the surface pressure dependent in situ UV-vis spectra of the polymers at the air-water interface revealed different behavioral details. In addition, the UV-vis spectra, fluorescence spectra, and quantum yields of the LB films provide design principles for making highly emissive films.     

Molecular organization in binary mixtures of derivatives of naphthalenebicarboxylic acid and naphthoylenebenzimidazole with a liquid crystal in two-dimensional layers II. Langmuir-Blodgett films

Langmuir-Blodgett (LB) films of some dichroic dyes, namely derivatives of naphthalenebicarboxylic acid and derivatives of naphthoylenebenzimidazole, and of their mixtures with mesogens: 4-octyl-4'-cyanobiphenyl or 4-pentyl-4'-cyano-p-terphenyl were prepared. Absorption and fluorescence studies using unpolarized and linearly polarized light were carried out. Both absorption and fluorescence spectra indicated the formation of aggregates of dye molecules in monomolecular layers. Moreover, it was found that dye molecules are more tilted to the quartz surface in LB films than to the plane of the air-water interface in Langmuir films.     

Spectroscopic studies of Langmuir-Blodgett films of 3,4,9,10-tetra(heptyloxycarbonyl)perylene and its mixtures with a liquid crystal

Langmuir (L) and Langmuir-Blodgett (LB) films of 3,4,9,10-tetra(heptyloxycarbonyl)perylene and its binary mixtures with 4-octyl-4'-cyanobiphenyl (8CB) and 4-pentyl-4'-cyano-p-terphenyl (5CT) have been studied. On the basis of the surface pressure-mean molecular area isotherms of L films, the alignment of the molecules on the air-water interface has been estimated. The L films were transferred onto quartz plates at surface pressures below the collapse point. The absorption and fluorescence spectra of LB films, obtained using unpolarized and linearly polarized light, were recorded. The results obtained have led to conclusions on the arrangement of the dye and liquid crystal molecules on the air-solid substrate interface. The fluorescence spectra revealed the formation of excited dimers in LB films.     

Langmuir-Blodgett Films and Calcium Ion Coordination of Biliverdin and Its Amphiphilic Derivatives

Up to now, the investigations of the chemistry of biliverdin and its analogs has been limited in organic solvents1-4. There is no report on organized molecular films of biliverdin and its derivatives. The structural organization and biophysical properties of biliverdin molecules in ordered molecular assemblies might be different from those in organic solvents, but similar to those in biological membranes in mammals. Therefore, biliverdin or its derivatives incorporated in ordered molecular fil…