CCD用于全息光栅常数实时测量研究

本文讨论了在制造全息光栅过程中，ＣＣＤ实时测量全息光栅常数的方法。其方法可实现高精度、全自动在线测量全息光栅常数，比传统的测量优越。文章用简单的装置借助ＣＣＤ进行数据采集、数据处理，实现快速自动测量光栅常数，在全息光学中有应用价值，对推广ＣＣＤ应用技术，促进光学测量现代化有现实意义。     

多个CCD交汇测量系统的理论研究

本文介绍了采用多个线阵ＣＣＤ 组成交汇测量系统的基本原理,导出了测量坐标的计算公式,并利用有关的误差理论对该方法的测量精度进行了详细分析。研究结果表明,多个ＣＣＤ 交汇测量系统能够得到较高的目标捕获几率,同时还能有效地提高坐标测量精度。对大靶面、高速小目标物体的精密测量具有重要意义     

CCD尺寸测量光学系统设计原理

介绍ＣＣＤ尺寸测量光学系统的设计原理．重点分析远心光路中的像点弥散、一维光纤列阵照明系统及利用像点弥散斑评价ＣＣＤ光学系统像质的方法。给出一种ＣＣＤ测量光学系统设计实例及其像质评价结果．     

CCD探测器在可擦除光存储实验中的应用

本文利用ＣＣＤ作为光探测器采集和测量可擦除光存储实验中连续变化的衍射信号,对用ＣＣＤ进行实时动态信号的测量原理和特点做了探讨,并设计了一套ＣＣＤ探测装置用于采集、显示和分析甲基红偶氮染料掺杂的聚乙烯醇（ＭＲ／ＰＶＡ）和酸化甲基红偶氮染料掺杂的聚乙烯醇（ＡＭＲ／ＰＶＡ）薄膜材料的光存储数据该装置操作简单,结果直观,具有较高的测量速度和测量精度,适于动态光信号测量。     

线阵CCD用于实时动态测量技术研究

本文研究的是在连续光条件下线阵ＣＣＤ实时动态测量技术,除了考虑ＣＣＤ像元响应非均匀性、非线性等影响因素外,还应认真考虑采样频率、测量精度、动态范围、快速电路等问题。本文还详细讨论了测量精度和动态范围问题,推导了测量精度公式与动态范围公式。为了减小测量误差和提高被测信号的频率,必须相应减小积分时间。精度公式是进行线阵ＣＣＤ电路设计的基本依据公式。动态范围与频率无关,只与结构参数有关,为了充分利用ＣＣＤ的动态范围,激光功率要可调。     

CCD测量杨氏模量的研究

本文研究ＣＣＤ在杨氏模量测量中的应用。ＣＣＤ可实现杨氏模量的自动化高精度测量，比传统的测量方法优越。     

一种使用线阵型CCD实现高精度二维位置测量的方法

介绍了一种使用ＣＣＤ测量位置的方法。与其它ＣＣＤ位置测量系统不同，通过设计一个特殊的光学系统，实现了使用两个线阵型ＣＣＤ进行高精度二维位置坐标测量。文中对该光学系统进行了误差分析，证实该方法具有很高的测量精度。该二维位置测量方法具有一些突出的优点：系统响应速度快，可以对动态目标进行测量；测量精度高；制造成本低。上述特点使它在工业制造领域内有着广阔的应用前景。     

使用CCD测量玻璃管内液体界面位置的灵巧测量头

本文介绍一种使用线阵ＣＣＤ进行玻璃管内液位测量的光电测量头。与其他ＣＣＤ尺寸测量的光学系统不同，本文依据不同的液体具有不同的折射率，提出利用柱形容器中液体的聚光特性，得到两种不同液体的分界面在线阵ＣＣＤ上清晰的像。     

线阵CCD用于长距离衍射准直测量

本文介绍了在半导体激光光纤与位相板相结合的准直情况下,利用线阵ＣＣＤ探测器测量大型工件形位误差遇到的光强变化而引起测量误差的问题,并对用线阵ＣＣＤ进行衍射信号测量的原理和特点作了分析。根据ＣＣＤ的工作原理和特性,提出了利用自动控制ＣＣＤ积分时间的方法,使ＣＣＤ输出的信号峰值保持恒定,提高了系统的测量精度。     

利用激光三角测距法提高三维面型检测精度的方法

本文首先介绍了根据激光三角测距原理并采用片光照明、面阵ＣＣＤ接收的三维面形检测原理，其优点在于物面相对于测量头仅需一个方向移动即可完成二维扫描，使测量系统结构简单、便于控制。其次分析了影响其测量精度的几个主要因素，即散斑噪声、接收器件本身的分辨率、投影片光束的宽度与稳定性。散斑噪声造成了投影光斑的抖动，ＣＣＤ的分辨率限制了测量系统的分辨率，而片光束的质量影响着ＣＣＤ光敏面上像斑的准确定位。针对其各自的特点给出了相应的解决途径。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.