Pyrrole adsorption on aluminum nitride nanotubes on DFT data

The adsorption behavior of pyrrole molecule with external surface of (5.0) on zigzag aluminum nitride nanotube (AlNNT) was studied using density functional theory calculations. It was found that the adsorption energy (E_ad) of pyrrole on the surface of pristine nanotubes is about–11.99 kcal/mol. However, when nanotubes have been doped with P atom, the adsorption energy of pyrrole was increased. Calculation showed that for the phosphorus-doped nanotube the adsorption energy range is about–9.04 to?12.80 kcal/mol. AlNNT is a suitable adsorbent for pyrrole, so it can be used in adsorption and separation processes involving pyrrole. The doped AlNNT can potentially be used for pyrrole sensors for detection in environmental systems.     

A theoretical study of CO adsorption on aluminum nitride nanotubes

Adsorption of toxic CO molecule on single-walled aluminum nitride nanotubes (AlNNTs) was investigated using density functional theory calculations. A detailed analysis of the energetic, geometry, and electronic structure of various CO adsorptions on the tube exterior surface was performed. In contrast to carbon and BN nanotubes, our results indicated that AlNNTs can strongly interact with CO molecules. The adsorption energy of the most stable configuration was calculated to be about −0.25 eV. The Morokuma–Kitaura decomposition for molecular interaction energies was used to investigate the nature of C–Al bond in the most stable CO–AlNNT complex, demonstrating that electrostatic forces and polarization term are basic factors of attractive interaction between CO and AlNNT. They provide 37.9 and 40.4% of attractive interaction and charge transfer energies make a little contribution to the adsorption energy of CO.     

A density-functional theory of hydrogen adsorption on indium nitride nanotubes

First-principles calculations based on density functional theory (DFT) are used to study the chemisorption properties of one, two, and four hydrogen atoms on the zigzag and armchair single-walled InN nanotubes (InNNTs).The results indicate that the H atom is strongly bounded to the exterior wall of (4, 4) InNNTs compared with the (7, 0) InNNTs, while the chemisorption energies corresponding to the most stable configuration of H₂ dissociation and a single H atom are found to be–3.85 and–3.26 eV, respectively. Furthermore, the effect of the hydrogen storage on the geometries and electronic properties of related InN nanotubes were also discussed. The computed density of states (DOS) indicates that the energy gap of the zigzag and armchair InN nanotubes on hydrogen adsorptions are significantly decreased which can increase the electrical conductance of the tubes. Therefore, InN nanotubes due to the high binding energy can be used for hydrogen storage.     

Arsenic (V) adsorption on Fe3O4 nanoparticle-coated boron nitride nanotubes

Multiwalled boron nitride nanotubes (BNNTs) functionalized with Fe(3)O(4) nanoparticles (NPs) were used for arsenic removal from water solutions. Sonication followed by a heating process was developed to in situ functionalize Fe(3)O(4) NPs onto a tube surface. A batch of adsorption experiments conducted at neutral pH (6.9) and room temperature (25 °C) and using the developed nanocomposites revealed effective arsenic (V) removal. The Langmuir, Freundlich, and Dubinin-Radushkevich adsorption isotherms were measured for a range of As(V) initial concentrations from 1 to 40 mg/L under the same conditions. The equilibrium data well fitted all isotherms, indicating that the mechanism for As(V) adsorption was a combination of chemical complexation and physical electrostatic attraction with a slight preference for chemisorption. The magnetite NPs functionalized on BNNTs led to a simple and rapid separation of magnetic metal-loaded adsorbents from the treated water under an external magnetic field.     

Hydrogen adsorption on zigzag (8,0) boron nitride nanotubes

The chemical adsorption of H atoms on an (8,0) zigzag boron nitride nanotube is studied using the density functional theory with the supercell method. One to four H atoms per 32 B and 32 N are considered. The results show that H atoms prefer to adsorb on the top sites of adjacent B and N atoms to form an armchair chain along the tube axis. An even-odd oscillation behavior of the adsorption energy of H atoms on the tube is found, and the average adsorption energy of even H atoms is obviously bigger than that of odd H atoms. The results can be understood with the frontier orbital theory. Based on this adsorption behavior, several high-symmetric structures of H adsorbed boron nitride nanotubes with 50% and 100% coverages are studied. The pairs of lines' pattern with 50% coverage has the biggest average adsorption energy per H(2) among the chosen configurations, corresponding to approximately 4 wt % hydrogen storage.     

Synthesis and characterization of faceted hexagonal aluminum nitride nanotubes

The synthesis of the faceted single-crystalline h-AlN nanotubes with the length of a few micrometers and diameters from 30 to 80 nm is first reported. This provides an ideal substrate for the construction of GaN-based nanoheterostructures in future nanoelectronics. The experimental results suggest the further extensive experimental and theoretical studies on the promising nonlayered nanotubular structures.     

Oxygen adsorption characteristics on hybrid carbon and boron‐nitride nanotubes

In this work, first‐principles density functional theory (DFT) is used to predict oxygen adsorption on two types of hybrid carbon and boron‐nitride nanotubes (CBNNTs), zigzag (8,0), and armchair (6,6). Although the chemisorption of O₂ on CBNNT(6,6) is calculated to be a thermodynamically unfavorable process, the binding of O₂ on CBNNT(8,0) is found to be an exothermic process and can form both chemisorbed and physisorbed complexes. The CBNNT(8,0) has very different O₂ adsorption properties compared with pristine carbon nanotubes (CNTs) and boron‐nitride nanotube (BNNTs). For example, O₂ chemisorption is significantly enhanced on CBNNTs, and O₂ physisorption complexes also show stronger binding, as compared to pristine CNTs or BNNTs. Furthermore, it is found that the O₂ adsorption is able to increase the conductivity of CBNNTs. Overall, these properties suggest that the CBNNT hybrid nanotubes may be useful as a gas sensor or as a catalyst for the oxygen reduction reaction. © 2014 Wiley Periodicals, Inc.     

Ab initio study of NH3 and H2O adsorption on pristine and Na-doped MgO nanotubes

We have investigated, on the basis of density functional theory calculations, the structural and electronic properties of chemical modification of pristine and Na-doped MgONTs with NH₃ and H₂O molecules. We found that the NH₃ and H₂O molecules can be barrierlessly adsorbed on the Mg atom of the tube sidewall along with a charge transfer from the adsorbate to MgONT. The adsorption is chemical in nature with adsorption energies about ?22.3 and ?21.5 kcal/mol for H₂O and NH₃, respectively. The calculated density of state (DOS) shows that the chemical modification of MgONTs with these molecules can be generally classified as certain type of “harmless modification.” In other words, the electronic properties of the MgONT are little changed by the adsorption processes. The substitution of an Mg atom in the tube surface with an Na atom results in a semi-insulator to p-type semiconductor transition based on DOS analysis. It was also found that the doping process reduces the adsorption energies and the electronic properties of Na-doped MgONT is slightly more sensitive toward NH₃ and H₂O molecules, compared with the pristine one.     

The effect of atomic hydrogen adsorption on single-walled carbon nanotubes properties

We investigated the adsorption of hydrogen atoms on metallic single-walled carbon nanotubes using ab initio molecular dynamics method. It was found that the geometric structures and the electronic properties of hydrogenated SWNTs can be strongly changed by varying hydrogen coverage. The circular cross sections of the CNTs were changed with different hydrogen coverage. When hydrogen is chemisorbed on the surface of the carbon nanotube, the energy gap will be appeared. This is due to the degree of the sp³ hybridization, and the hydrogen coverage can control the band gap of the carbon nanotube.     

The effect of gas adsorption on the field emission mechanism of carbon nanotubes

We have investigated systematically the effects of various gas adsorbates (H2, N2, O2, and H2O) on the electronic structures and the field emission properties of open edges of single-walled carbon nanotubes by density functional calculations. All of the molecules, except N2, dissociate and chemisorb on open nanotube edges with large adsorption energies. The Fermi levels are moved toward the valence (conduction) bands for O2 (H2, H2O) adsorption induced by the Mulliken charge transfer on the tube edge. The Fermi level shift for N2 adsorption is negligible. Adsorption of H2O enhances the field emission current, whereas H2 adsorption does not affect the field emission current much because of the absence of the density of states near the Fermi level. The correlation of the electronic structures and the field emission current is further discussed.     

Ab initio theoretical study of non-covalent adsorption of aromatic molecules on boron nitride nanotubes

We have studied non-covalent functionalization of boron nitride nanotubes (BNNTs) with benzene molecule and with seven other different heterocyclic aromatic rings (furan, thiophene, pyrrole, pyridine, pyrazine, pyrimidine, and pyridazine, respectively). A hybrid density functional theory (DFT) method with the inclusion of dispersion correction is employed. The structural and electronic properties of the functionalized BNNTs are obtained. The DFT calculation shows that upon adsorption to the BNNT, the center of aromatic rings tend to locate on top of the nitrogen site. The trend of adsorption energy for the aromatic rings on the BNNTs shows marked dependence on different intermolecular interactions, including the dispersion interaction (area of the delocalized π bond), the dipole-dipole interaction (polarization), and the electrostatic repulsion (lone pair electrons). The DFT calculation also shows that non-covalent functionalization of BNNTs with aromatic rings can give rise to new impurity states within the band gap of pristine BNNTs, suggesting possible carrier doping of BNNTs via selective adsorption of aromatic rings.     

The assessment of boron nitride nanotubes and functionalized carbon nanotubes as containers for anticancer drug delivery of dacarbazine and effect of urea on adsorption process by molecular dynamics

Structural Chemistry - The adsorption mechanism of dacarbazine (DAC) onto outer surfaces of boron nitride nanotubes (BNNTs) and functionalized carbon nanotubes (FCNTs) with one and three drug...     

氮化铝的研究进展

AIN在热、电、光和机械等方面具有非常良好的综合性能。本文综述了近年来AIN在导热机理、粉末其及薄膜制备等领域的研究进展，展望了AIN未来的发展趋势。     

The effect of boron nitride nanotubes size on the HArF interaction by NBO and AIM analysis

Three molecules HArF@BNNT(5,0), HArF@BNNT(6,0), and HArF@BNNT(7,0) have been formed by HArF encapsulated in boron nitride nanotubes (BNNTs) with different sizes. Due to the interaction between the HArF and the BNNTs, the H? Ar bond lengths are in a decrease trend, while the Ar? F bond lengths are in an increase trend compared with those of HArF. To investigate the nature of the interaction between H and Ar and the interaction between Ar and F, the quantum theory of “atoms in molecules” was carried out. The Laplacian (?²ρ_b) values of H? Ar suggest that the covalent interaction plays a key role in the H‐Ar interaction. For Ar? F, the results indicate that the Ar‐F interaction has a dominant noncovalent character. Moreover, the results obtained from the ratio of the kinetic‐energy density (G_b) and the potential‐energy density (V_b) (?G_b/V_b) and the total energy density (H_b) are in good agreement with that of ?²ρ_b values. In addition, the results of natural bond orbital charge and electron density difference between the HArF and BNNTs show that less electrons transfer away from the HArF to BNNTs with the gradual increase in the diameters of the BNNTs. © 2014 Wiley Periodicals, Inc.     

The effect of surface ions on water adsorption to mica

We have measured the adsorption isotherms of water on a single surface of freshly cleaved mica with K+ on the surface, and on mica where the K+ has been exchanged for H+. Using a very sensitive interferometric technique, we have found a significant difference between the two isotherms at submonolayer coverage, for relative vapor pressures p/p0 < 0.5. The K+-mica isotherm shows a pronounced convexity, suggesting distinct adsorption sites, whereas the H+-mica isotherm is flatter. The two isotherms converge above monolayer coverage. The results give a graphic demonstration of the importance of nanoscale surface heterogeneities for vapor adsorption at submonolayer coverage.     

Simulating the effect of carbon nanotube curvature on adsorption of polycyclic aromatic hydrocarbons

The results of Molecular Dynamics simulation of polycyclic aromatic hydrocarbons adsorption on single-walled (13,9) carbon nanotube are reported. We discuss the angular orientation and plausible adsorbed states of molecules. It is shown, that suggested by Gotovac et al. orientation of adsorbed molecules is correct.     

Characterization of Lewis acid sites on the (100) surface of beta-AlF3: Ab initio calculations of NH3 adsorption

The current study employs hybrid-exchange density functional theory to show that the Lewis base, NH(3), binds to the beta-AlF(3) (100) surface with a binding energy (BE) of up to -1.96 eV per molecule. This is characteristic of a strong Lewis acid. The binding of NH(3) to the surface is predominately due to electrostatic interactions. There is only a small charge transfer from the NH(3) molecule to the surface. The BE as a function of coverage is computed and used to develop a lattice Monte Carlo model which is used to predict the temperature programed desorption (TPD) spectrum. Comparison with experimental TPD studies of NH(3) from beta-AlF(3) strongly suggests that these structural models and binding mechanisms are good approximations to those that occur on real AlF(3) surfaces.     

The adsorption of biogenic amines on carbon nanotubes

The adsorption of phenylethylamine, tryptamine, and tyramine on carbon nanotubes from aqueous solutions (pH 7.4) was studied depending on time and sorbate concentration. The suggestion was made that their interaction with electrodes was determined by electrostatic attraction between protonated amino groups and oxygen-containing functional groups of the surface of carbon. An increase in the adsorption of biological amines was caused by the interaction of the π systems of their aromatic rings with carbon surface hexagons. The adsorption of biogenic amines on carbon nanotubes was necessary for their possible electrooxidation and analytic determination by electrochemical methods with the use of carbon electrodes. Original Russian Text ? I.G. Sidorenko, O.V. Markitan, N.N. Vlasova, G.M. Zagorovskii, V.V. Lobanov, 2009, published in Zhurnal Fizicheskoi Khimii, 2009, Vol. 83, No. 6, pp. 1139–1142.