The simple solvent-free synthesis of 1H-quinazoline-2,4-diones using supercritical carbon dioxide and catalytic amount of base

Only supercritical carbon dioxide (scCO₂) as a reactant and a solvent, and catalytic amount of base (DBU (1,8-diazabicyclo[5.4.0]undec-7-ene), DBN (1,5-diazabicyclo[4.3.0]non-5-ene), Dabco^® (1,4-diazabicyclo[2.2.2]octane), and triethylamine) afforded 1H-quinazoline-2,4-diones in good to excellent yields from 2-aminobenzonitriles. 6,7-Dimethoxy-1H-quinazoline-2,4-dione, which is a key intermediate of medicines (Prazosin, Bunazosin, and Doxazosin) was synthesized successfully in a 97% yield, using 0.1 equiv of DBU under scCO₂ (10 MPa) at 80 °C.     

Pyrazoles as ligands for the Rh-catalyzed hydroformylation of alkenes in supercritical carbon dioxide

Activity of pyrazole ligands in hydroformylation of a number of unsaturated terminal substrates in supercritical carbon dioxide (scCO₂) in the presence of Rh-catalyst was studied. The ligands without free NH group at position 1 of the pyrazole ring were found to be active. The use of scCO₂ as the reaction medium served to reach a higher conversion and regioselectivity of hydroformylation as compared to those in toluene.     

Influence of polymerization conditions on catalytic properties of the TiCl2{η2-1-[C(H)=N(2,3,5,6-tetrafluorophenyl)]-2-O-3,5-di-But-C6H2}2/MAO system in ethylene homopolymerization and copolymerization with α-olefins

Experimental data on ethylene homo- and copolymerization with higher a-olefins (hex-1-ene, oct-1-ene, and dec-1-ene) by the catalytic system TiCl₂{η²-1-[C(H)=N(2,3,5,6-tetrafluorophenyl)]-2-O-3,5-di-Bu^t-C₆H₂}₂/MAO in a Nefras medium and in toluene are presented. The catalytic system provides ultrahigh-molecular-weight polyethylene and incorporation of comonomer units at a level of 2–3 mol.% in both solvents. Nascent copolymers formed in Nefras (petroleum solvent), unlike those obtained in toluene, are characterized by two melting peaks in the DSC thermograms and only one when obtained in toluene. The molecular weight of polyolefins is efficiently controlled by the introduction of hydrogen into the system.     

Hydrosilation in Supercritical CO2: Synthesis of Fluorinated Polysiloxanes

Hydrosilation of poly(methylhydrosiloxane) with a fluorinated olefin in supercritical CO₂ (scCO₂) using Karstedt's Pt catalyst has been successfully demonstrated; results were compared with those obtained in a subcritical conventional solvent, i.e. toluene. Rates of hydrosilation were found to be dependent on solvent, reactant concentration, and reaction temperature. Levels of hydrosilation were 40–50%, depending on reaction conditions. Gel formation, which was not observed under any conditions in subcritical toluene, occurred in all reactions done in scCO₂ and accounted for up to 20 wt.‐% of the final product mix.     

Nitroxide-mediated precipitation polymerization of styrene in supercritical carbon dioxide: Effects of monomer loading and nitroxide partitioning on control

Nitroxide-mediated solution and precipitation polymerizations of styrene in toluene and supercritical carbon dioxide (scCO₂), respectively, using the nitroxides N-tert-butyl-N-[1-diethylphosphono-(2,2-dimethylpropyl)]nitroxide (SG1) and 2,2,5-trimethyl-4-phenyl-3-azahexane-3-nitroxide (TIPNO) are presented. Solution polymerizations are compared with simulations using PREDICI software, revealing that differences in the polymerization behaviours between the SG1- and TIPNO-mediated systems cannot be rationalized based on literature rate coefficients and the ideal mechanism for nitroxide-mediated polymerization. Nitroxide and monomer partitioning between the polymer particles and the continuous phase play important roles in the precipitation polymerizations in scCO₂. Loss of control (broader molecular weight distributions) as a result of nitroxide partitioning is accentuated at low monomer loading, and is significantly more pronounced for TIPNO than SG1. However, at higher monomer loading the level of control was superior in scCO₂ compared to in the corresponding solution polymerizations for both nitroxides, most likely caused by an increase in the number of activation-deactivation cycles experienced by any given chain during its growth.     

Partitioning effect of nitrogen catalyst into polymerizing particles on dispersion reversible chain transfer catalyzed polymerization (dispersion RTCP) of methyl methacrylate in supercritical carbon dioxide and organic solvents

Reversible chain transfer catalyzed polymerization (RTCP) in dispersion polymerization system (dispersion RTCP) of methyl methacrylate (MMA) was performed with N‐iodosuccimide (NIS) as a nitrogen catalyst in supercritical carbon dioxide (scCO₂). The solubility of NIS in scCO₂ can be controlled by tuning the pressure, and this led to promote NIS partitioning into polymerizing particles. As a result, the molecular weight distribution control was successfully improved by decreasing the NIS solubility in the medium by tuning the scCO₂ at a low pressure of 20 MPa. On the other hand, at the same NIS concentration, a solution RTCP of MMA in toluene as a homogeneous polymerization system did not proceed with a controlled/living manner. The importance of NIS partitioning into the polymerizing particles was also confirmed in hexane as well as scCO₂ medium. From these results, it was clarified that the NIS catalyst partitioning into the polymerizing particles as main polymerization loci is a key factor to control the molecular weight distribution in the dispersion RTCP of MMA in scCO₂. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 613–620     

Synthesis and properties of conjugated fluoroalkyl ether-substituted polythiophenes prepared in organic solvent and supercritical carbon dioxide

A number of new fluoroalkyl ether-containing polythiophenes are synthesized via oxidative polymerization in supercritical CO₂ (scCO₂) and chloroform. In both cases, high-molecular-mass polymers with high yields are prepared. The properties of the polymers synthesized in scCO₂, such as molecular mass, polydispersity, conjugation, and UV absorption, are similar to the properties of the polymers obtained in chloroform. All poly(fluoroalkyl ether thiophenes) show solubility in DMF, toluene, THF, chloroform, and acetone. The glass-transition temperatures of the polymers are in the range 58–82°C, and the temperatures corresponding to 10% loss in their weight are in the ranges 248–294 and 260–303°C for poly(fluoroalkyl ether thiophenes) synthesized in scCO₂ and chloroform, respectively. All polymers fluoresce in the blue region with emission maxima at 506 to 526 nm. Because of the unique combination of fluoroalkyl and carbonyl groups, poly(fluoroalkyl ether thiophenes) feature good solubility in scCO₂, which is a promising alternative solvent for the oxidative polymerization of fluoroalkyl ether thiophenes.     

Rhodium-tris(3,5-bis(trifluoromethyl)phenyl)phosphine catalyzed hydroformylation of dienes to dialdehydes in supercritical carbon dioxide with high activity

Rhodium-catalyzed hydroformylation of 1,5-hexadiene and 1,7-octadiene to corresponding dialdehydes was investigated in compressed CO₂ and in toluene using different fluorinated phosphine compounds as ligands. A rhodium complex using tris(3,5-bis(trifluoromethyl)phenyl)phosphine is highly effective in compressed CO₂ for double hydroformylation of 1,5-hexadiene, whose TOF value is much larger than those reported so far. It has been shown that this ligand is effective also for the hydroformylation of 1,7-octadiene and scCO₂ is a better solvent than a conventional organic solvent of toluene for the title reaction.     

Influence of structure and solubility of chain transfer agents on the RAFT control of dispersion polymerisation in scCO2

Reversible addition–fragmentation chain transfer (RAFT) dispersion polymerisation of methyl methacrylate (MMA) is performed in supercritical carbon dioxide (scCO₂) with 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid (DDMAT) present as chain transfer agent (CTA) and surprisingly shows good control over PMMA molecular weight. Kinetic studies of the polymerisation in scCO₂ also confirm these data. By contrast, only poor control of MMA polymerisation is obtained in toluene solution, as would be expected for this CTA which is better suited for acrylates. In this regard, we select a range of CTAs and use them to determine the parameters that must be considered for good control in dispersion polymerisation in scCO₂. A thorough investigation of the nucleation stage during the dispersion polymerisation reveals an unexpected “in situ two-stage” mechanism that strongly determines how the CTA works. Finally, using a novel computational solvation model, we identify a correlation between polymerisation control and degree of solubility of the CTAs. All of this ultimately gives rise to a simple, elegant and counterintuitive guideline to select the best CTA for RAFT dispersion polymerisation in scCO₂.

RAFT dispersion polymerisation of methyl methacrylate is performed in scCO₂ with 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid (DDMAT) present as chain transfer agent (CTA) and surprisingly shows good control over PMMA molecular weight.     

傅立叶变换红外光谱技术在超临界CO2作用聚合物体系中的应用

超临界CO₂（scCO₂）作为一种物理化学性质优良、具有高扩散速率及优良溶解性能的溶剂,在科学研究及工业生产中广受青睐。将scCO₂应用于聚合物体系中,CO₂ 与聚合物间特殊的相互作用有利于CO₂分子在聚合物中的吸附与扩散。同时通过CO₂的吸附及其对聚合物的溶胀和塑化作用,聚合物所处微观化学环境以及整体结构性质会发生一定的变化。由于傅立叶变换红外光谱（FTIR）技术能够有效地考察化学环境变化对分子结构造成的影响,这一表征技术在超临界CO₂作用体系中广为应用。本文主要选取了近年来利用FTIR技术考察scCO₂作用于聚合物体系的一些实例,从CO₂-聚合物相互作用机理,scCO₂对聚合物或生物大分子的加工过程的影响两方面,阐述了利用红外光谱技术在scCO₂作用体系中的应用以及前景。     

Fluorocyclohexanes. Part XVI. The six H-trifluoromethyldecafluoro- and two of the 2H,4H-trifluoromethylnonafluoro-cyclohexanes

Fluorination of benzotrifluoride by cobaltic fluoride at 260–280° gave, besides the fluorocarbon, the six possible tridecafluoromethylcyclohexane isomers, and two 2H,4H-dodecafluorides. Of the C₇HF₁₃ compounds, only the cis?2H-, and the cis- and trans-4H-isomers could be isolated pure. The two 3H-isomers were made by pyrolysis of perfluoro(1-methyl-3-isopropylcyclohexane) in the presence of toluene. The trans-2H-isomer was made by further fluorination of one of the 2H,4H-dodecafluorides. Aqueous potash and the cis-2H-tridecafluoride gave 1-trifluoromethylnonafluorocyclohex-1-ene, which with stronger alkali hydrolysed to 1-carboxynonafluorocyclohex-1-ene. The cis- and trans- 2H and 4H-tridecafluorides were dehydrofluorinated by sodium fluoride at 320–380° (the cis-isomer of each pair reacted faster than the trans- : axial versus equatorial hydrogen) to give, respectively, the 1-trifluoromethylnonafluoro-ene and the 4-trifluoromethyl-isomer. The latter was isomerised to the former by sodium fluoride at 500–600°. The 1?CF₃-ene gave hexafluoroglutaric acid on oxidation with alkaline potassium permanganate.     

Effect of trimethylaluminum on the formation of active sites of the catalytic system bis[N-(3,5-di-tert-butylsalicylidene)-2,3,5,6-tetrafluoroanilinato]titanium(IV) dichloride—MAO and catalytic isomerization of hex-1-ene

The transformations of bis[N-(3,5-di-tert-butylsalicylidene)-2,3,5,6-tetrafluoroanilinato]-titanium(iv) dichloride (L₂TiCl₂) occurring in toluene under the action of methylalumoxane (MAO) were studied by ¹H NMR spectroscopy. The commercially available MAO containing trimethylaluminum (AlMe₃) and MAO free of AlMe₃ (the so called “dry” MAO) were used. The catalytic transformations of hex-1-ene involving the systems L₂TiCl₂-MAO were studied. We proposed the structures of the cationic titanium complexes formed in the absence and in the presence of hex-1-ene under the action of MAO. In the absence of olefin, neutral and cationic titanium complexes are decomposed under the action of AlMe₃ according to the exchange reaction of the complex ligand with the methyl groups of AlMe₃ to form LAlMe₂. The neutral complexes react considerably faster than the cationic ones. In the presence of olefin, decomposition of complexes under the action of AlMe₃ is suppressed. The titanium complex activated by “dry” MAO isomerizes hex-1-ene to hex-2-ene. In the presence of large amounts of TMA (commercial MAO), this reaction does not take place.     

Tuning catalyst solubility in CO2 by changing molar volume

Abstract

Poor-solvating property of supercritical carbon dioxide (scCO₂) has been a great challenge, which limits the use of CO₂ as a common “green” solvent. The present report describes that by increasing molar volume (v) and lowering the melting temperature, which lowers cohesive energy density or solubility parameter (δ), it is possible to increase the solubility of metal-based catalysts in scCO₂ without using costly fluorinated or tailor-made CO₂-philic modifications. We have studied various chlorodistannoxanes (1) and Cu–β-diketonates (2) to support our views. The study of bio-diesel production and transesterification of hindered esters using 1 in scCO₂ shows a 2–8-folds rate enhancement coupled with an easier catalyst and product separation than that in organic solvents. The methodology, which works at least within the range of Van der Waals sphere of interactions, can be useful to solubilizing the molecules in scCO₂ and carries great opportunity in catalysis as well as in separation science.     

Reactive collisions in quadrupole cells. Part I. Reaction of [CH3NH2]+˙ with the isomeric butenes and pentenes

The reactions of mass-selected [CH₃NH₂]⁺˙ ions with the isomeric butenes and pentenes were studied at low collision energies in the radiofrequency-only quadrupole collision cell of a hybrid BEqQ tandem mass spectrometer. Characteristic iminium ions arising by addition of the methylamine to the olefin followed by fragmentation are observed for but-1-ene pent-1-ene and 3-methylbut-1-ene. However, for but-2-ene pent-2-ene 2-methylpropene 2-methylbut-1-ene and 2-methylbut-2-ene the major reaction channel of [CH₃NH₂]⁺˙ is charge exchange to form the olefinic molecular ion. The isomeric olefins are characterized to a considerable extent by the characteristic ion–molecule reactions that these molecular ions undergo with the neutral olefin.     

Synthesis of poly[2-(perfluorooctyl)ethyl acrylate-<Emphasis Type="Italic">co</Emphasis>-poly(ethylene glycol) methacrylate] and its control of enzyme activity in supercritical carbon dioxide

Poly[2-(perfluorooctyl)ethyl acrylate-co-poly(ethylene glycol) methacrylate], P(POA-co-PEGm) was prepared as a new surfactant for scCO₂. The random copolymer was obtained by the radical polymerization of 2-(perfluorooctyl)ethyl acrylate (POA) and poly(ethylene glycol) methacrylate (PEGm) in DMF. The molar ratio of the POA and PEGm units in the copolymer was POA/PEGm = 0.972/0.028 by ¹H NMR. The molecular weight and molecular weight distribution were estimated by size exclusion chromatography to be Mn = 133,000 and Mw/Mn = 8.25, respectively. It was suggested that the copolymer formed micellar aggregates with the cores of the PEGm chains in scCO₂, based on the analyses of the copolymer in hexafluorobenzene by ¹H NMR and dynamic light scattering. The copolymer was soluble in scCO₂ and had a cloud point at a much higher pressure than the critical pressure. It was found that the copolymer solubilized CO₂-insoluble proteins such as bovine serum albumin and subtilisin Carlsberg in scCO₂. The solubility of the copolymer was not influenced by the presence of the proteins; however, the solubility decreased in the presence of a small amount of water along with the protein. The activity of the subtilisin slightly decreased when only placed in scCO₂, whereas a marked decrease in the activity was observed for the subtilisin in the presence of the copolymer in scCO₂. The subtilisin activity decreased as the CO₂ pressure increased.     

Study of structural changes and mesomorphic transitions of oriented poly(ethylene therephthalate) fibers in supercritical CO2

Supercritical carbon dioxide (scCO₂), an environmentally friendly solvent, can change the fine structure of fibers depending on treatment temperature and pressure. Samples of partially oriented yarn (POY) PET fibers were uniaxially drawn below the glass transition temperature (T_g) and then exposed to scCO₂ under tension to induce morphological changes in them. The effects of draw ratio and scCO₂ exposure on the structural changes and mesomorphic transitions were evaluated. For this purpose, thermal characteristics of the structure, especially the rearrangement of polymer chains in the amorphous phase induced by cold-drawing and exposure to scCO₂, were evaluated by differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR). The orientation factor of the fibers was measured using a polarizing microscope. The paracrystalline portion and the crystallite sizes of exposed samples were estimated by wide-angle X-ray diffraction. To evaluate the solubility of CO₂ molecules in the samples, density and fractional free volumes were also measured. A good correlation was obtained between the results obtained from various measurement techniques. Results showed that cold-drawing of PET fibers leads to a strain-induced crystallization and that exposure to scCO₂ changes the structure of the oriented PET samples. To investigate mesophase transitions, percentage of extended chains in the amorphous regions was calculated by analyzing the results of DSC and FTIR. Results showed that the amount of extended chains developing during cold-drawing in the amorphous regions decreased when exposed to scCO₂.     

Thermoplastic starch and glutaraldehyde modified thermoplastic starch foams prepared using supercritical carbon dioxide fluid as a blowing agent

Supercritical carbon dioxide (scCO₂) processed thermoplastic starch (scCO₂^aTPS), cellulose nanofiber (CNF) modified scCO₂^aTPS (scCO₂^aTPS₁₀₀CNF_0.02) and glutaraldehyde (GA) modified scCO₂^aTPS₁₀₀CNF_0.02 (scCO₂^aTPS₁₀₀CNF_0.02GA_x) foams were prepared for the first time using scCO₂ as a blowing agent during their foaming processes. The expansion ratio, cell density, moisture resistance, and compressive strength (σ_c) retention properties of each foam series were considerably improved with increasing scCO₂ pressure during the foaming processes. The expansion ratios and cell densities of each scCO₂^aTPS₁₀₀CNF_0.02GA_x foam series were increased considerably to a maximum value, as the GA content approached an optimum value. The optimal scCO₂¹¹TPS₁₀₀CNF_0.02GA_1.6 foam material exhibited a high expansion ratio and cell density at approximately 50 and approximately 8 × 10⁸ cells/cm³, respectively. Compared with corresponding aged scCO₂^aTPS and scCO₂^aTPS₁₀₀CNF_0.02 foam specimens, considerably better moisture resistance and σ_c retention properties were observed for scCO₂^aTPS₁₀₀CNF_0.02GA_x foam specimens, when they were modified with the corresponding optimum GA content. The moisture resistance and σ_c retention for optimal prepared scCO₂⁷TPS₁₀₀CNF_0.02GA_0.4, scCO₂⁹TPS₁₀₀CNF_0.02GA_0.8 and scCO₂¹¹TPS₁₀₀CNF_0.02GA_1.6 foam materials improved further with increasing scCO₂ pressure. Possible reasons accounting for the highly expansion ratio, moisture resistance, and σ_c retention properties for scCO₂^aTPS₁₀₀CNF_0.02GA_x foams are presented.     

Some reactions of tetrafluoroethylene oligomers

As part of a programme to prepare and evaluate a series of perfluoro- chemicals for use as inert fluids, the fluorinations of some tetrafluoroethylene oligomers over cobalt (III) fluoride have been studied.Fluorination of perfluoro-3,4-dimethylhex-3-ene (tetramer) and perfluoro-4-ethyl-3,4-dimethylhex-2-ene (pentamer) over CoF₃ at 230°C and l45°C respectively afforded the corresponding saturated fluorocarbons however, at 250°C, pentamer gave predominantly the saturated tetramer. The thermal behaviour of these saturated fluorocarbons alone and in the presence of bromine and toluene has been studied.Pyrolysis of pentamer over glass beads at 500°C gave perfluoro-1,2,3- trimethylcyclobutene and isomers of perfluoro-2,3-dimethylpenta-1,3- diene. Under similar conditions perfluoro-2-(1-ethyl-1-methylpropyl). 3-methylpent-1-ene (hexamer) gave perfluoro-1-methyl-2-(1-methyl- propyl)-cyclobut-1-ene and perfluoro-2-methyl-3-(1-methylpropyl)-buta- 1,3-diene.These reactions and the structural elucidation of the products will be discussed.     

Heterogeneous strong base catalysis in supercritical carbon dioxide by mesoporous alumina and sulfated mesoporous alumina

The development of solid strong base catalysts utilizable in green but acidic medium of scCO₂ is reviewed. The strong base sites on mesoporous alumina and sulfated mesoporous alumina that had been generated by severe treatment at 773 K under vacuum (10^?4 Torr) were not neutralized by the compressed Lewis acidic molecules of CO₂, promoting a representative strong base-catalyzed reaction of the Tishchenko reaction as well as a typical base-catalyzed reaction of the Knoevenagel reaction in scCO₂. Infrared spectroscopy of the adsorbed pyrrole, temperature-programmed desorption of CO₂, and the poisoning by a very weak Brönsted acid of methanol have revealed that the average strengths of the base sites on mesoporous alumina and sulfated mesoporous alumina are weaker than that on conventional γ-alumina like JRC-ALO-4, but that they have a small number of strong base sites which function even in scCO₂ medium. It was found that the addition of a slight amount of THF cosolvent into scCO₂ remarkably accelerates the Tishchenko reaction over sulfated mesoporous alumina; the reaction rate in the scCO₂–THF medium was 1.5-fold and 2-fold faster than those in ordinary organic solvents such as benzene and THF and that in pure scCO₂, respectively. The unique structures of mesoporous alumina and sulfated mesoporous alumina have been fully characterized by N₂ adsorption–desorption measurements and XRD analyses.     

Grafting of methyl methacrylate onto natural rubber in supercritical carbon dioxide

The grafting of the methyl methacrylate (MMA) monomer onto natural rubber (NR) was carried out by supercritical carbon dioxide (scCO₂) swelling polymerization with benzoyl peroxide (BPO) as an initiator. Fourier transform–infrared spectroscopy (FT–IR) was used to confirm the formation of graft copolymers with the characteristic bands of symmetric C?O and C? O? C stretching vibrations at 1728 cm^?1 and 1147 cm^?1, respectively. The effects of the rubber‐to‐monomer ratio, amount of initiator, reaction time, and pressure on the monomer grafting level (GL) and grafting efficiency (GE) were investigated, and the optimum conditions for the preparation of NR‐g‐MMA were found to be 70:30 of the rubber‐to‐monomer ratio, 1.2% of the initiator content, and the reaction pressure of 23 MPa for 6 h. The thermal behavior of the NR and the different NR/MMA molar ratio grafted copolymer samples was studied by differential scanning calorimetry (DSC). The observed glass transition temperature (T_g) was consistent with the GL. The tensile strength, modulus of elasticity, elongation at break, hardness, and oil resistance of graft copolymers were determined and compared with the values of NR and that of polymerization products prepared in traditional toluene solution. The results showed that the tensile strength, modulus of elasticity, hardness and oil resistance were greatly improved after modification in scCO₂. Copyright © 2007 John Wiley & Sons, Ltd.