用透射电镜法研究聚(苯乙烯-异戊二烯)二嵌段共聚物微相分离的微区尺寸

本文采用透射电镜(TEM)法,系统地研究了具有不同组成,不同分子量和不同形态结构的聚(苯乙烯-异戊二烯)二嵌段共聚物,并由TEM照片直接测量具有栓状,层状和有规双连续双金钢石(OBDD)结构的PS-PI二嵌共聚物的微区尺寸,讨论了其与分子量的关系。实验证明嵌段共聚物微相分离有规结构的微区尺寸大小与分子量呈2/3的关系。     

等规聚苯乙烯与聚(乙烯/丙烯)嵌段共聚物的研究(Ⅱ)──嵌段共聚物的分离与表征

将配位聚合法合成的等规聚苯乙烯与聚(乙烯/丙烯)嵌段共聚反应产物进行溶剂车取分离,得到嵌段共聚物[iPS-b-Poly(E-co-P)]的含量约为总重量的20％～30％,并用¹³CNMR、FTIR、WAXD、DSC和电子显微镜进行表征．该共聚物是具有等规聚苯乙烯(iPS)与乙丙无规共聚链段结构的三元两嵌段共聚物,且iPS链段有一定的结晶度．由透射电镜可以看出,嵌段共聚物存在微相分离结构,相区尺寸在100nm数量级．     

用于大分子定向自组装的新型嵌段共聚物的合成与表征

设计了具有高Flory-Huggins相互作用参数的嵌段共聚物聚(对叔丁基苯乙烯)-b-聚(甲基丙烯酸羟乙酯)(PtBS-b-PHEMA),并分别采用阴离子聚合和原子转移自由基聚合(ATRP)方式制备了不同嵌段比例、不同分子量的窄分子量分布的该嵌段共聚物。利用核磁共振分析了嵌段共聚物的组分,利用小角X射线散射(SAXS)分析了嵌段共聚物相分离后的尺寸及结构,对比研究了两种聚合方式对嵌段共聚物性能的影响。结果表明,采用阴离子聚合方式得到的嵌段共聚物分子量分布更窄,相同分子量下发生微相分离的尺寸更小,其在150℃真空烘箱中加热18h后可以形成尺寸为9.96nm的柱状相及8.42nm的层状相。     

聚甲基丙烯酸甲酯-聚四氢呋喃嵌段共聚物微观结构的研究

我们用SAXS、TEM等方法研究了分子量分散性较大的PMMA-b-PTHF两嵌段共聚物的微相结构。试样的分子量多分散系数为1.99,PMMA的重量分数为0.48。实验结果表明,其平衡微相结构并不是层状微区,而是在尺寸上也具有一定分散性的球状微区,微区之间并未形成三维有序的大晶格结构,而是一种无规聚集结构。这和单分散两嵌段共聚物理论所预言的结果是不同的。     

聚甲基丙烯酸甲酯-聚四氢呋喃嵌段共聚物微观结构的研究

 我们用SAXS、TEM等方法研究了分子量分散性较大的PMMA-b-PTHF两嵌段共聚物的微相结构。试样的分子量多分散系数为1.99,PMMA的重量分数为0.48。实验结果表明,其平衡微相结构并不是层状微区,而是在尺寸上也具有一定分散性的球状微区,微区之间并未形成三维有序的大晶格结构,而是一种无规聚集结构。这和单分散两嵌段共聚物理论所预言的结果是不同的。     

接枝共聚物聚苯乙烯－g－聚氧乙烯的微相分离形态研究

本文利用透射电子显微镜技术，以两性接校共聚物聚苯乙烯－ｇ－聚氧乙烯为研究对象，研究了接枝共聚物的微相分离形态结构，发现聚苯乙烯－ｇ－聚氧乙烯能形成微相分离结构，微区的形状和尺寸与共聚物的组成和侧链长度有关．文中还讨论了嵌段共聚物和接枝共聚物在形成微相分离结构时的共性和个性．     

接枝共聚物聚苯乙烯－g－聚氧乙烯的微相分离形态研究

 本文利用透射电子显微镜技术，以两性接校共聚物聚苯乙烯－ｇ－聚氧乙烯为研究对象，研究了接枝共聚物的微相分离形态结构，发现聚苯乙烯－ｇ－聚氧乙烯能形成微相分离结构，微区的形状和尺寸与共聚物的组成和侧链长度有关．文中还讨论了嵌段共聚物和接枝共聚物在形成微相分离结构时的共性和个性．     

嵌段共聚物的微相分离及其质子交换膜性能

嵌段共聚物由于自身嵌段之间的热力学不相容性,容易发生微相分离而形成质子传导通道,并且采用可控活性聚合的方法可设计合成具有特定拓扑结构嵌段共聚物,使之成为最具潜力的一类质子交换膜材料。本文从用于质子交换膜的嵌段共聚物的微相分离热力学理论出发,分析了影响嵌段共聚物微相分离的各类因素,其中包括磺化度、共聚物拓扑结构、嵌段长度、嵌段序列分布、微观聚集结构以及表面形貌等,并对该领域未来的发展做了展望。     

用固体高分辨NMR研究聚(L-丙氨酸)-聚乙二醇单甲醚双嵌段共聚物的微相结构与链段运动

利用固体高分辨¹³CCP/MAS及二维WISE核磁共振技术研究了聚(L-丙氨酸)-聚乙二醇单甲醚双嵌段共聚物(MPEG-b-PLA)在固态下的微相结构和链段运动行为.结果表明,聚乙二醇链段在形成嵌段共聚物后结晶度明显下降,同时存在晶区和非晶区,从而表现出两种不同的运动状态.而聚乙二醇链段的引入对聚L-丙氨酸链段影响不大,嵌段共聚物中聚L-丙氨酸链段高度结晶,同时含有大量的α螺旋结构,分子链运动严重受限,估计聚L-丙氨酸链段的相区尺寸很小.     

均聚物PS共混对PI-PS-PLA薄膜中微纳米结构的影响

将均聚物聚苯乙烯(PS)与三嵌段共聚物聚异戊二烯-聚苯乙烯-聚乳酸(PI-PS-PLA)以一定摩尔比共混,采用原子力显微镜(AFM)研究了均聚物浓度对其薄膜样品中微纳米结构的影响。结果表明:当n(PS)∶n(PI-PS-PLA)为1∶2和1∶1时,薄膜呈现出规则排列的柱状微结构,且柱状微区的尺寸较混合前的样品有所改变;当n(PS)∶n(PI-PS-PLA)为2∶1时,PS与嵌段共聚物PI-PS-PLA的分子链发生了相分离,其中均聚物PS相形成了较大尺寸的岛状微区。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.