首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
对纳米流体在伸/缩楔体上的磁流体(MHD)流动进行了数值研究。首先,通过相似变换将控制偏微分方程转化为非线性常微分方程组;然后,利用Matlab软件,借助打靶法,结合四阶五常龙格库塔迭代方案进行数值求解;最后,详细讨论了各控制参数对无量纲速度、温度、浓度、表面摩擦系数、局部Nusselt数和局部Sherwood数的影响。结果表明,楔体在拉伸情况下只有唯一解,理论上不会出现边界层分离;而在一定收缩强度范围内存在双解,边界层流动在壁面处可能会出现边界层分离,壁面抽吸会使边界层分离推迟;楔体在拉伸情况下,磁场参数对表面摩擦系数的影响较大,对局部Nusselt数和局部Sherwood数的影响较小。  相似文献   

2.
The boundary layer flow of a nanofluid past a stretching/shrinking sheet with hydrodynamic and thermal slip boundary conditions is studied. Numerical solutions to the governing equations are obtained using a shooting method. The results are found for the skin friction coefficient, the local Nusselt number, and the local Sherwood number as well as the velocity, temperature, and concentration profiles for some values of the velocity slip parameter, thermal slip parameter, stretching/shrinking parameter, thermophoresis parameter, and Brownian motion parameter. The results show that the local Nusselt number, which represents the heat transfer rate, is lower for higher values of thermal slip parameter, thermophoresis parameter, and Brownian motion parameter.  相似文献   

3.
The magnetohydrodynamic(MHD) mixed convection flow past a shrinking vertical sheet with thermal radiation is considered. Besides, the effects of Cu-Al2O3 nanoparticles and dust particles are considered. The similarity variables reduce the governing equations to the similarity equations, which are then solved numerically. The outcome shows that, for the shrinking case, the solutions are not unique. The rate of heat transfer and the friction factor enlarge with increasing the...  相似文献   

4.
The magnetohydrodynamic (MHD) flow and heat transfer characteristics for the boundary layer flow over a permeable stretching sheet are considered. Velocity and thermal slip conditions are taken into account. Problem formulation is developed in the presence of thermal radiation. Governing non‐linear problem is solved by a homotopy analysis method. Convergence of the derived solutions is studied. Numerical values of skin‐friction coefficient and local Nusselt number are tabulated. Effects of pertinent parameters on the velocity and temperature profiles are discussed. Comparison between the present and previous limiting results is shown. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

5.
In this paper, the problem of unsteady axisymmetric boundary layer flow and heat transfer induced by a permeable shrinking sheet in the presence of radiation effect is studied. The transformed boundary layer equations are solved numerically by an implicit finite‐difference scheme known as the Keller‐box method. The influence of radiation, unsteadiness and mass suction parameters on the reduced skin friction coefficient f′′(0) and the heat transfer coefficient ?θ′(0), as well as the velocity and temperature profiles are presented and discussed in detail. It is found that dual solutions exist and suction parameter delays the separation of boundary layer. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

6.
The boundary-layer flow and heat transfer in a viscous fluid containing metallic nanoparticles over a nonlinear stretching sheet are analyzed. The stretching velocity is assumed to vary as a power function of the distance from the origin. The governing partial differential equation and auxiliary conditions are reduced to coupled nonlinear ordinary differential equations with the appropriate corresponding auxiliary conditions. The resulting nonlinear ordinary differential equations (ODEs) are solved numerically. The effects of various relevant parameters, namely, the Eckert number Ec, the solid volume fraction of the nanoparticles φ, and the nonlinear stretching parameter n are discussed. The comparison with published results is also presented. Different types of nanoparticles are studied. It is shown that the behavior of the fluid flow changes with the change of the nanoparticles type.  相似文献   

7.
The problem of the steady magnetohydrodynamic (MHD) stagnation-point flow of an incompressible viscous fluid over a stretching sheet is studied. The effect of an induced magnetic field is taken into account. The nonlinear partial differential equations are transformed into ordinary differential equations via the similarity transformation. The transformed boundary layer equations are solved numerically using the shooting method. Numerical results are obtained for various magnetic parameters and Prandtl numbers. The effects of the induced magnetic field on the skin friction coefficient, the local Nusselt number, the velocity, and the temperature profiles are presented graphically and discussed in detail.  相似文献   

8.
The characteristics of heat transfer in the three-dimensional stagnationpoint flow past a stretching/shrinking surface of the Al2O3-Cu/H2O hybrid nanofluid with anisotropic slip are investigated. The partial differential equations are converted into a system of ordinary differential equations by valid similarity transformations. The simplified mathematical model is solved computationally by the bvp4c approach in the MATLAB operating system. This solving method is...  相似文献   

9.
The heat transfer of Homann flow in the stagnation region of the Al2 O3-Cu/water hybrid nanofluid is investigated by adopting the Tiwari-Das model over a cylindrical disk.The effects of the nanoparticle shape,the viscous dissipation,and the nonlinear radiation are considered.The governing equations are obtained by using similarity transformations,and the numerical outcomes for the flow and the temperature field are noted by bvp4 c on MATLAB.The numerical solutions of the fl...  相似文献   

10.
The unsteady viscous flow over a continuously permeable shrinking surface is studied. Similarity equations are obtained through the application of similar transformation techniques. Numerical techniques are used to solve the similarity equations for different values of the unsteadiness parameter, the mass suction parameter, the shrinking parameter and the Prandtl number on the velocity and temperature profiles as well as the skin friction coefficient and the Nusselt number. It is found that, different from an unsteady stretching sheet, dual solutions exist in a certain range of mass suction and unsteadiness parameters.  相似文献   

11.
12.
An unsteady magnetohydrodynamic (MHD) boundary layer flow over a shrinking permeable sheet embedded in a moving viscous electrically conducting fluid is investigated both analytically and numerically. The velocity slip at the solid surface is taken into account in the boundary conditions. A novel analytical method named DTMBF is proposed and used to get the approximate analytical solutions to the nonlinear governing equation along with the boundary conditions at infinity. All analytical results are compared with those obtained by a numerical method. The comparison shows good agreement, which validates the accuracy of the DTM-BF method. Moreover, the existence ranges of the dual solutions and the unique solution for various parameters are obtained. The effects of the velocity slip parameter, the unsteadiness parameter, the magnetic parameter, the suction/injection parameter, and the velocity ratio parameter on the skin friction, the unique velocity, and the dual velocity profiles are explored, respectively.  相似文献   

13.
This paper investigates the effects of thermal radiation on the magnetohy-drodynamic (MHD) flow and heat transfer over a nonlinear shrinking porous sheet. The surface velocity of the shrinking sheet and the transverse magnetic field are assumed to vary as a power function of the distance from the origin. The temperature dependent viscosity and the thermal conductivity are also assumed to vary as an inverse function and a linear function of the temperature, respectively. A generalized similarity transformarion is used to reduce the governing partial differential equations to their nonlinear coupled ordinary differential equations, and is solved numerically by using a finite difference scheme. The numerical results concern with the velocity and temperature profiles as well as the local skin-friction coefficient and the rate of the heat transfer at the porous sheet for different values of several physical parameters of interest.  相似文献   

14.
The numerical analysis of heat transfer of laminar nanofluid flow over a fiat stretching sheet is presented. Two sets of boundary conditions (BCs) axe analyzed, i.e., a constant (Case 1) and a linear streamwise variation of nanopaxticle volume fraction and wall temperature (Case 2). The governing equations and BCs axe reduced to a set of nonlinear ordinary differential equations (ODEs) and the corresponding BCs, respectively. The dependencies of solutions on Prandtl number Pr, Lewis number Le, Brownian motion number Nb, and thermophoresis number Nt are studied in detail. The results show that the reduced Nusselt number and the reduced Sherwood number increase for the BCs of Case 2 compared with Case 1. The increases of Nb, Nt, and Le numbers cause a decrease of the reduced Nusselt number, while the reduced Sherwood number increases with the increase of Nb and Le numbers. For low Prandtl numbers, an increase of Nt number can cause to decrease in the reduced Sherwood number, while it increases for high Prandtl numbers.  相似文献   

15.
This paper presents a numerical analysis of the steady boundary-layer flow of a Reiner–Philippoff fluid induced by a 90° stretching wedge in a variable free stream. The governing partial differential equations are converted into a set of two ordinary differential equations by the use of a similarity transformation. The flow is therefore governed by a stretching velocity parameter λ and two non-Newtonian fluid parameters γ and μ0. The variation of the skin friction, as well as other flow characteristics, as a function of the governing parameters is presented graphically and tabulated. A stability analysis has also been performed for this self-similar flow based on linear disturbances to the steady similarity solutions. The results presented in this paper reveal that there are no multiple (dual) solutions for the present problem and the unique solution is stable.  相似文献   

16.
Zainal  N. A.  Nazar  R.  Naganthran  K.  Pop  I. 《应用数学和力学(英文版)》2021,42(10):1511-1524
Applied Mathematics and Mechanics - The non-Newtonian fluid model reflects the behavior of the fluid flow in global manufacturing progress and increases product performance. Therefore, the present...  相似文献   

17.
Combined heat and mass transfer on free, forced, and mixed convection flow along a porous wedge with magnetic effect in the presence of chemical reaction is investigated. The flow field characteristics are analyzed by the Runge-Kutta-Gill scheme with the shooting method as well as the local non-similarity method up to the third level of truncation, which are used to reduce the governing partial differential equations into nine ordinary differential equations. The governing boundary layer equations are converted to a dimensionless form by Falkner-Skan transformations. Because of the effect of suction/injection on the wall of the wedge with buoyancy force and variable wall temperature, the flow field is locally non-similar. Numerical calculations up to the third order level of truncation are carried out as a special case for different values of dimensionless parameters. Effects of the magnetic field strength in the presence of chemical reaction with variable wall temperature and concentration on the dimensionless velocity, temperature and concentration profiles are shown graphically.  相似文献   

18.
In this paper, we study the unsteady coupled heat and mass transfer of two-dimensional MHD fluid over a moving oscillatory stretching surface with Soret and Dufour effects. Viscous dissipation effects are adopted in the energy equation. A uniform magnetic field is applied vertically to the flow direction. The governing equations are reduced to non-linear coupled partial differential equations and solved by means of homotopy analysis method (HAM). The effects of some physical parameters such as magnetic parameter, Dufour number, Soret number, the Prandtl num- ber and the ratio of the oscillation frequency of the sheet to its stretching rate on the flow and heat transfer characteristics are illustrated and analyzed.  相似文献   

19.
The goal of the present paper is to examine the magnetohydrodynamic effects on the boundary layer flow of the Jeffrey fluid model for a non-Newtonian nanofluid past a stretching sheet with considering the effects of a heat source/sink. The governing partial differential equations are reduced to a set of coupled nonlinear ordinary differential equations by using suitable similarity transformations. These equations are then solved by the variational finite element method. The profiles of the velocity, temperature, and nanoparticle volume fraction are presented graphically, and the values of the Nusselt and Sherwood numbers are tabulated. The present results are compared with previously published works and are found to be in good agreement with them.  相似文献   

20.
This work is concerned with Magnetohydrodynamic viscous flow due to a shrinking sheet in the presence of suction. The cases of two dimensional and axisymmetric shrinking are discussed. The governing boundary layer equations are written into a dimensionless form by similarity transformations. The transformed coupled nonlinear ordinary differential equations are numerically solved by using an advanced numeric technique. Favorability comparisons with previously published work are presented. Numerical results for the dimensionless velocity, temperature and concentration profiles as well as for the skin friction, heat and mass transfer and deposition rate are obtained and displayed graphically for pertinent parameters to show interesting aspects of the solution.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号