Synthesis of mono- and disubstituted porphyrins: A- and 5,10-A2-type systems

General syntheses have been developed for meso-substituted porphyrins with one or two substituents in the 5,10-positions and no beta substituents. 5-Substituted porphyrins with only one meso substituent are easily prepared by an acid-catalyzed condensation of dipyrromethane, pyrrole-2-carbaldehyde, and an appropriate aldehyde using a "[2+1+1]" approach. Similarly, 5,10-disubstituted porphyrins are accessible by simple condensation of unsubstituted tripyrrane with pyrrole and various aldehydes using a "[3+1]" approach. The yields for these reactions are low to moderate and additional formation of either di- or monosubstituted porphyrins due to scrambling of the intermediates is observed. However, the reactions can be performed quite easily and the desired target compounds are easily removed due to large differences in solubility. A complementary and more selective synthesis involves the use of organolithium reagents for S(N)Ar reactions. Reaction of in situ generated porphyrin (porphine) with 1.1-8 equivalents of RLi gave the monosubstituted porphyrins, while reaction with 3-6 equivalents of RLi gave the 5,10-disubstituted porphyrins in yields ranging from 43 to 90 %. These hitherto almost inaccessible compounds complete the series of different homologues of A-, 5,15-A(2)-, 5,10-A(2)-, A(3)-, and A(4)-type porphyrins and allow an investigation of the gradual influence of type, number, and regiochemical arrangement of substituents on the properties of meso-substituted porphyrins. They also present important starting materials for the synthesis of ABCD porphyrins and are potential synthons for supramolecular materials requiring specific substituent orientations.     

Mechanistic studies on the nucleophilic reaction of porphyrins with organolithium reagents.

Porphyrins react readily with organolithium reagents under substitution of free meso positions. As this method has proven to be very versatile for the preparation of a wide range of meso substituted porphyrins, a mechanistic study of the reaction was undertaken using 5,15-diaryl- and dialkyl substituted porphyrins, 2,3,7,8,12,13,17,18-octaethylporphyrin, and the respective nickel(II) complexes. A combination of deuteration experiments, electronic absorption spectroscopy of the reactive intermediates, trapping of intermediates with organic electrophiles, and reaction at different pH values showed significant differences in the reaction pathways of free base porphyrins and metalloporphyrins. In both cases the reaction proceeds initially under formation of phlorin like intermediates which are stable in water. For the Ni(II)phlorins a mesomeric carbanionic form with a highly distorted structure exists that can react as a nucleophile with electrophiles such as RI, H+, or D+. In the latter case a protonation-deprotonation equilibrium involving porphodimethen intermediates has to be assumed. Free base phlorins do not react as nucleophiles but can undergo H/D exchange reactions in strongly acidic media.     

5,10-A2B2-type meso-substituted porphyrins--a unique class of porphyrins with a realigned dipole moment

Current applications in porphyrin chemistry require the use of unsymmetrically substituted porphyrins. Many current industrial interests in optics and biomedicine require systems with either push-pull (electron-donating and -withdrawing groups) or amphiphilic systems (hydrophobic and hydrophilic groups). In this context we present the class of 5,10-A(2)B(2)-type porphyrins for which two different substituents are positioned in diagonally opposite meso positions. Thus, the intramolecular dipole moment in these tetrapyrroles is positioned along a β-β vector passing through two pyrrole rings. This is opposite to the situation of the frequently used 5,15-A(2)BC porphyrins for which the dipole moment is oriented along a meso-meso axis. We have elaborated syntheses of the 5,10-A(2)B(2) porphyrins by using transition-metal-catalyzed transformations of 5,10-A(2) porphyrins or direct substitutions reactions thereof; this gives the target molecules in 22-77% overall yields. The compounds exhibit interesting structural, spectroscopic, and optical features and can serve as building blocks for new porphyrin arrays and applications.     

Atropisomers of meso-conjugated uracyl porphyrin derivatives and their assembling structures

[reaction: see text] We have synthesized a 5,15 meso-substituted methyluracyl porphyrin derivative bearing 6-methyluracyl units directly at the meso positions. The atropisomerization was regulated by steric replusion between the methyl substituents. When the atropisomers were mixed with alkylated melamine as a complementary hydrogen-bonding unit, the hydrogen-bonded assemblies were analyzed by diffusion-ordered spectroscopy (DOSY) in solution, which clarified that the alphabeta isomer formed a face-to-face dimer, whereas the alphabeta isomer took a zigzag structure.     

Rational synthesis of meso- or beta- fluoroalkylporphyrin derivatives via halo-fluoroalkylporphyrin precursors: electronic and steric effects on regioselective electrophilic substitution in 5-fluoroalkyl-10,20-diarylporphyrins

[reaction: see text] Electrophilic nitration, formylation or bromination of metalated 5-fluoroalkyl-10,20-diphenylporphyrin (fluoroalkyl = CF3, ClCF2CF2, n-C6F13) proceeded with high regioselectivity, exclusively affording corresponding meso-substituted porphyrins, while the iodination reaction mainly took place at the adjacent beta site giving 2-iodo-10-fluoroalkyl-5,15-diphenylporphyrin. Suzuki, Sonogashira, and trifluoromethylation reactions of the obtained 5-bromo-15-fluoroalkyl-10,20-diphenylporphyrins or 2-iodo-10-fluoroalkyl-5,15-diphenylporphyrins could perform smoothly to give the corresponding various meso- or beta-functionalized fluoroalkylated porphyrin derivatives. Accordingly, two meso-to-meso butadiyne-bridged bisporphyrin dimers and two beta-to-beta butadiyne-linked dimeric porphyrins were prepared by the coupling reactions of 5-ethynyl-15-fluoroalkyl-10,20-diphenylporphyrins and 2-ethynyl-10-fluoroalkyl-5,15-diphenylporphyrins, respectively.     

Porphyrins fused with unactivated polycyclic aromatic hydrocarbons

A systematic study of the preparation of porphyrins with extended conjugation by meso,β-fusion with polycyclic aromatic hydrocarbons (PAHs) is reported. The meso-positions of 5,15-unsubstituted porphyrins were readily functionalized with PAHs. Ring fusion using standard Scholl reaction conditions (FeCl(3), dichloromethane) occurs for perylene-substituted porphyrins to give a porphyrin β,meso annulated with perylene rings (0.7:1 ratio of syn and anti isomers). The naphthalene, pyrene, and coronene derivatives do not react under Scholl conditions but are fused using thermal cyclodehydrogenation at high temperatures, giving mixtures of syn and anti isomers of the meso,β-fused porphyrins. For pyrenyl-substituted porphyrins, a thermal method gives synthetically acceptable yields (>30%). Absorption spectra of the fused porphyrins undergo a progressive bathochromic shift in a series of naphthyl (λ(max) = 730 nm), coronenyl (λ(max) = 780 nm), pyrenyl (λ(max) = 815 nm), and perylenyl (λ(max) = 900 nm) annulated porphyrins. Despite being conjugated with unsubstituted fused PAHs, the β,meso-fused porphyrins are more soluble and processable than the parent nonfused precursors. Pyrenyl-fused porphyrins exhibit strong fluorescence in the near-infrared (NIR) spectral region, with a progressive improvement in luminescent efficiency (up to 13% with λ(max) = 829 nm) with increasing degree of fusion. Fused pyrenyl-porphyrins have been used as broadband absorption donor materials in photovoltaic cells, leading to devices that show comparatively high photovoltaic efficiencies.     

SNAr reactions of β-substituted porphyrins and the synthesis of meso substituted tetrabenzoporphyrins

Reaction of 2,3,7,8,12,13,17,18-octaethylporphyrin with LiR reagents containing functional groups readily yields meso substituted derivatives suitable for further transformations with residues such as -p-C₆H₅Br, -p-C₆H₅-CCH, -p-C₆H₅-NH₂ or -(CH₂)₃-CHCH₂. Similar reactions of tetrabenzoporphyrin with alkyllithium reagents afforded the first entry into meso mono- and dialkylsubstituted tetrabenzoporphyrins while reaction of bicyclo[2.2.2]oct-type masked isoindole precursors with LiR followed by in situ retro-Diels-Alder reaction also afforded the 5-phenyl and 5,10-diphenyltetrabenzoporphyrins in high purity.     

Bromoporphyrins as versatile synthons for modular construction of chiral porphyrins: cobalt-catalyzed highly enantioselective and diastereoselective cyclopropanation

5,10-Bis(2',6'-dibromophenyl)porphyrins bearing various substituents at the 10 and 20 positions were demonstrated to be versatile synthons for modular construction of chiral porphyrins via palladium-catalyzed amidation reactions with chiral amides. The quadruple carbon-nitrogen bond formation reactions were accomplished in high yields with different chiral amide building blocks under mild conditions, forming a family of D2-symmetric chiral porphyrins. Cobalt(II) complexes of these chiral porphyrins were prepared in high yields and shown to be active catalysts for highly enantioselective and diastereoselective cyclopropanation under a practical one-pot protocol (alkenes as limiting reagents and no slow addition of diazo reagents).     

Stirring the porphyrin alphabet soup--functionalization reactions for porphyrins

Advances in the synthesis of unsymmetrically meso substituted porphyrins are based on the development of new total syntheses and porphyrin functionalization methods. These methods have replaced earlier mixed condensation reactions and give synthetic access to almost any desired meso-substituted porphyrin. They include the complete series of porphyrin homologues and regioisomers of the A(x)-series with either alkyl or aryl residues, and numerous examples of ABCD-type chromophores. The syntheses are based on a combination of classic functionalization reactions, the use of organolithium reagents in S(N)Ar reactions, and organometallic reactions with Pd, Ni, Cr, Ru, B, and Sn catalysis. This feature article gives an account of our work in the past decade to develop synthetic methods for the A(x)- and ABCD-type porphyrins and their use as optical materials and photosensitizers.     

Structures of the Heme Acquisition Protein HasA with Iron(III)‐5,15‐Diphenylporphyrin and Derivatives Thereof as an Artificial Prosthetic Group

Iron(III)‐5,15‐diphenylporphyrin and several derivatives were accommodated by HasA, a heme acquisition protein secreted by Pseudomonas aeruginosa , despite possessing bulky substituents at the meso position of the porphyrin. Crystal structure analysis revealed that the two phenyl groups at the meso positions of porphyrin extend outside HasA. It was shown that the growth of P. aeruginosa was inhibited in the presence of HasA coordinating the synthetic porphyrins under iron‐limiting conditions, and that the structure of the synthetic porphyrins greatly affects the inhibition efficiency.     

Rational or statistical routes from 1-acyldipyrromethanes to meso-substituted porphyrins. Distinct patterns, multiple pyridyl substituents, and amphipathic architectures

New methodology is described for the synthesis of porphyrins bearing four (A 4, cis-A 2B 2, cis-ABC 2, trans-A 2B 2) or fewer (A, cis-AB, cis-A 2, trans-A 2) meso substituents. The method entails condensation of two 1-acyldipyrromethanes in the presence of a metal salt (MgBr 2, 3 mol equiv) and a noncoordinating base (DBU, 10 mol equiv) in a noncoordinating solvent (toluene) with heating (conventional or microwave irradiation) and exposure to air. The rational synthesis of trans-A 2B 2- or trans-A 2-porphyrins was achieved via condensation of two identical 1-acyldipyrromethanes. The statistical synthesis of various meso-substituted porphyrins was achieved via condensation of two nonidentical 1-acyldipyrromethanes. Both routes possess attractive features including (1) no scrambling, (2) good yield (up to 60%) at high concentration (100 mM) for the macrocycle-forming step, (3) reasonable scope (aryl, heteroaryl, alkyl, or no substituent), (4) short reaction time ( approximately 2 h) via microwave irradiation, (5) magnesium porphyrins as the products, which easily undergo demetalation, and (6) facile chromatographic purification. A key advantage of the statistical route is to obtain a cis-substituted porphyrin without the corresponding trans isomer. For example, reaction of an A/B-substituted 1-acyldipyrromethane and the fully unsubstituted 1-formyldipyrromethane gave the magnesium chelates of three porphyrins: the trans-A 2B 2-porphyrin, the "hybrid" cis-AB-porphyrin, and porphine (no trans-AB-porphyrin can form), which were readily demetalated and separated as the free base species. Altogether 26 1-acyldipyrromethanes and 26 target porphyrins have been prepared, including many with two different pyridyl substituents. One set of amphipathic porphyrins includes cis-A 2B 2- or cis-A 2BC-porphyrins wherein A = pentyl and B/C = pyridyl ( o-, m-, p-). Taken together, the rational and statistical routes enable facile conversion of readily available 1-acyldipyrromethanes to diverse porphyrins bearing 1-4 meso substituents for which access is limited via other methods.     

Synthesis of 5,15-diarylporphyrins via orthoesters condensation with aryldipyrromethanes

General access to 5,15-diarylporphyrins in two steps is described. Generalization of this approach to tetra-substituted porphyrins allows the reproducible preparation of compounds, in some cases with high yields for porphyrins, which can be used in photodynamic therapy (PDT) in cancer today.     

3-Cyclobutenyl-1,2-dione-substituted porphyrins. A general and efficient entry to porphyrin-quinone and quinone-porphyrin-quinone architectures

A new and efficient synthesis of meso-linked porphyrin-quinone dyads and quinone-porphyrin-quinone triads has been developed via the intermediacy of porphyrins bearing 3-cyclobutenyl-1,2-dione and 3-(1-ethenyl)cyclobutenyl-1,2-dione substituents at one or two nonadjacent meso-positions. The free-base porphyrins 5-bromo-10,20-diphenylporphyrin and 5,15-dibromo-10,20-diphenylporphyrin undergo facile palladium-catalyzed Stille coupling with 3-isopropoxy-2-tri-n-butylstannyl-cyclobutene-1,2-dione to produce the corresponding mono- and bis(3-cyclobutenyl-1,2-dione)-substituted porphyrins in good yields. In contrast, the zinc bromoporphyrins reacted with the same tin reagent only slowly and with the formation of side products. The free-base bromoporphyrins also were coupled with tri-n-butylvinyltin to afford vinylporphyrins in very good yields. 5,15-Diphenyl-10-vinylporphyrin was converted into trans-bromovinylporphyrin, which underwent facile Stille coupling with 3-isopropoxy-2-tri-n-butylstannylcyclobutene-1,2-dione to afford the vinylogous 3-cyclobutenyl-1,2-dione-substituted porphyrin. The molecular structure of 5,15-bis(3-cyclobutenyl-1,2-dione)-10,20-diphenylporphyrin(Z n) was determined by X-ray crystallography. Although the data revealed a fairly large dihedral angle between the cyclobutenedione and the porphyrin rings (57 degrees), the UV-vis spectra of both the mono- and bis(3-cyclobutenyl-1,2-dione)-substituted porphyrins showed B- and Q-band red shifts indicative of strong electronic coupling between the porphyrin and cyclobutenedione chromophores in solution. Introduction of a double bond between the cyclobutenedione and porphyrin rings resulted in a significant red shift of both the B- and Q-bands compared to those of the nonvinylogous system. All porphyrinic cyclobutenediones were metalated with zinc and then, using established cyclobutenedione chemistry, converted into a variety of porphyrin-quinones in excellent yields with aryllithium and vinylic Grignard reagents. From the mono(3-cyclobutenyl-1,2-dione)-substituted porphyrin, 7, a variety of directly linked monoquinone-porphyrin dyads were easily synthesized. Substituents could also be introduced at the free meso-position of 7 by bromination followed by palladium-catalyzed cross-coupling reactions, and additional porphyrinic monoquinones were then prepared from these starting materials. The vinylogous squarylporphyrin was converted into a double bond linked porphyrin-quinone via reaction with phenyllithium followed by thermal rearrangement and oxidation. As a result of the hindered rotation around the C-C bond between the porphyrin and the quinone, pairs of stable, separable, and thermally interconvertable atropisomers of porphyrin-quinones were obtained from 5,15-bis(3-cyclobutenyl-1,2-dione)-10,20-diphenylporphyrin(Z n). The structure of one of the atropisomers was determined by X-ray crystallography.     

Virtual libraries of tetrapyrrole macrocycles. Combinatorics, isomers, product distributions, and data mining

A software program (PorphyrinViLiGe) has been developed to enumerate the type and relative amounts of substituted tetrapyrrole macrocycles in a virtual library formed by one of four different classes of reactions. The classes include (1) 4-fold reaction of n disubstituted heterocycles (e.g., pyrroles or diiminoisoindolines) to form β-substituted porphyrins, β-substituted tetraazaporphyrins, or α- or β-substituted phthalocyanines; (2) combination of m aminoketones and n diones to form m × n pyrroles, which upon 4-fold reaction give β-substituted porphyrins; (3) derivatization of an 8-point tetrapyrrole scaffold with n reagents, and (4) 4-fold reaction of n aldehydes and pyrrole to form meso-substituted porphyrins. The program accommodates variable ratios of reactants, reversible or irreversible reaction (reaction classes 1 and 2), and degenerate modes of formation. Po?lya's theorem (for enumeration of cyclic entities) has also been implemented and provides validation for reaction classes 3 and 4. The output includes the number and identity of distinct reaction-accessible substituent combinations, the number and identity of isomers thereof, and the theoretical mass spectrum. Provisions for data mining enable assessment of the number of products having a chosen pattern of substituents. Examples include derivatization of an octa-substituted phthalocyanine with eight reagents to afford a library of 2,099,728 members (yet only 6435 distinct substituent combinations) and reversible reaction of six distinct disubstituted pyrroles to afford 2649 members (yet only 126 distinct substituent combinations). In general, libraries of substituted tetrapyrrole macrocycles occupy a synthetically accessible region of chemical space that is rich in isomers (>99% or 95% for the two examples, respectively).     

5,15-二(对-取代苯基)八烷基卟啉及其金属配合物的合成

本文报道了五种5,15-二(对-取代苯基)-2,8,12,18-四乙基-3,7,13,17-四甲基卟啉(Ⅱa—Ⅱe)和五种5,15-二(对-取代苯基)-2,3,7,8,12,13,17,18-八甲基卟啉(Ⅰa—Ⅰe)以及它们的铜、铁、镍金属配合物的合成。这些化合物的结构均经元素分析、UV、~1HNMR和MS鉴定。芳环上不同取代基对卟啉成环反应有一定影响,拉电子基团有利于反应。其顺序如下:NO_2>H>CH_3>OCH_3>N(CH_3)_2。     

Meso-porphyrinylphosphine oxides: mono- and bidentate ligands for supramolecular chemistry and the crystal structures of monomeric {[10,20-diphenylporphyrinatonickel(II)-5,15-diyl]-bis-[P(O)Ph(2)] and polymeric self-coordinated {[10,20-diphenylporphyrinatozinc(II)-5,15-diyl]-bis-[P(O)Ph(2)]}

A series of porphyrins substituted in one or two meso positions by diphenylphosphine oxide groups has been prepared by the palladium-catalyzed reaction of diphenylphosphine or its oxide with the corresponding bromoporphyrins. Compounds {MDPP-[P(O)Ph2]n} (M = H2, Ni, Zn; H2DPP = 5,15-diphenylporphyrin; n = 1, 2) were isolated in yields of 60-95%. The reaction is believed to proceed via the conventional oxidative addition, phosphination, and reductive elimination steps, as the stoichiometric reaction of eta(1)-palladio(II) porphyrin [PdBr(H2DPP)(dppe)] (H2DPP = 5,15-diphenylporphyrin; dppe = 1,2-bis(diphenylphosphino)ethane) with diphenylphosphine oxide also results in the desired mono-porphyrinylphosphine oxide [H2DPP-P(O)Ph2]. Attempts to isolate the tertiary phosphines failed due to their extreme air-sensitivity. Variable-temperature 1H NMR studies of [H2DPP-P(O)Ph2] revealed an intrinsic lack of symmetry, while fluorescence spectroscopy showed that the phosphine oxide group does not behave as a "heavy atom" quencher. The electron-withdrawing effect of the phosphine oxide group was confirmed by voltammetry. The ligands were characterized by multinuclear NMR and UV-visible spectroscopy, as well as mass spectrometry. Single-crystal X-ray crystallography showed that the bis(phosphine oxide) nickel(II) complex {[NiDPP-[P(O)Ph2]2} is monomeric in the solid state, with a ruffled porphyrin core and the two P=O fragments on the same side of the average plane of the molecule. On the other hand, the corresponding zinc(II) complex formed infinite chains through coordination of one Ph2PO substituent to the neighboring zinc porphyrin through an almost linear P=O...Zn unit, leaving the other Ph2PO group facing into a parallel channel filled with disordered water molecules. These new phosphine oxides are attractive ligands for supramolecular porphyrin chemistry.     

General synthesis of meso-amidoporphyrins via palladium-catalyzed amidation

A series of meso-amidoporphyrins were facilely synthesized by direct reactions of meso-brominated porphyrins with amides via palladium-catalyzed amidation reaction. Using a combination of palladium precursor Pd(OAc)(2) or Pd(2)(dba)(3) and phosphine ligand Xantphos, both 5-bromo-10,20-diphenylporphyrin and 5,15-dibromo-10,20-diphenylporphyrin, as well as their zinc complexes, can be effectively coupled with a wide variety of amides to give the corresponding mono- and bis-substituted meso-amidoporphyrins in high yields under mild conditions. [reaction: see text]     

Versatile synthesis of meso-aryloxy- and alkoxy-substituted porphyrins via palladium-catalyzed C-O cross-coupling reactions

[reaction: see text] meso-Aryloxy- and alkoxy-substituted porphyrins were conveniently synthesized by direct reactions of meso-halogenated porphyrins with alcohols via palladium-catalyzed C-O cross-coupling reactions. Using a combination of palladium precursor Pd(OAc)(2) or Pd(2)(dba)(3) and phosphine ligand DPEphos or Xantphos allowed both 5-bromo-10,20-diarylporphyrin and 5,15-dibromo-10,20-diarylporphyrin, as well as their zinc complexes, to be effectively coupled with a variety of alcohols to give the corresponding mono- and bis-substituted meso-aryloxy/alkoxyporphyrins in moderate to high yields under mild conditions.     

Interactions of cationic porphyrins with double-stranded oligodeoxynucleotides: a study by electrospray ionisation mass spectrometry

Electrospray ionisation mass spectrometry (ESI-MS), electrospray ionisation tandem mass spectrometry (ESI-MS/MS) and Ultraviolet-visible (UV-vis) spectroscopy were used to investigate the non-covalent interactions between small oligonucleotide duplexes with the GC motif and a group of cationic meso(N-methylpyridynium-4-yl)porphyrins (four free bases with one to four positive charges, and the zinc complex of the tetracationic free base).The results obtained point to outside binding of the porphyrins, with the binding strength increasing with the number of positive charges. Fragmentations involving losses from both chains were observed for the porphyrins with N-methylpyridinium-4-yl groups in opposite meso positions.     

Porphyrin Synthesis in Surfactant Solution: Multicomponent Assembly in Micelles

A synthesis of meso-substituted porphyrins in anionic sodium dodecyl sulfate micelles has been developed. Polar, functionalized aromatic aldehydes condense reversibly with pyrrole in the micellar phase. Oxidation of the porphyrinogen then provides functionalized porphyrins in yields of 10-48%. Hydrophobic aldehydes condense irreversibly to give low yields at practical substrate concentrations. Synthesis in D(2)O solution results in per-beta-deuterated porphyrins. A two-phase model is used to rationalize the dependence of porphyrin yield on reactant and surfactant concentration. Micelles are viewed as potential wells which promote porphyrinogen assembly by binding products more tightly than reactants.