Conformational analysis and comparison between theoretical and experimental vibrational spectra for chloroacetyl isocyanate

The conformational stability and vibrational infrared and Raman spectra of chloroacetyl isocyanate (CH2ClCONCO) were investigated by ab initio MP2 and density functional B3LYP calculations using the 6-311 + + G** basis set. From the potential energy scans of the internal rotations of both the halomethyl and the isocyanate rotors, chloroacetyl isocyanate was predicted to exist predominantly in a mixture of the cis-cis (chlorine atom and NCO group eclipse C=O bond) and the gauche-cis (one hydrogen atom and NCO group eclipse C=O bond) conformations with a comparable relative stability. The vibrational wavenumbers of each of the two conformers of the molecule were computed at DFT-B3LYP/6-311 + + G** level. Normal coordinate calculations were carried out to obtain the potential energy distributions (PED) among the symmetry coordinates of the normal modes for each of the stable conformers of chloroacetyl isocyanate. The theoretical vibrational assignments are compared with experimental ones and a ratio of observed/calculated wavenumbers of about 0.97-1.04 was obtained.     

Analysis of vibrational spectra of 3-halo-1-propanols CH(2)XCH(2)CH(2)OH (X is Cl and Br)

The conformational stability and the three rotor internal rotations in 3-chloro- and 3-bromo-1-propanols were investigated by DFT-B3LYP/6-311+G and ab initio MP2/6-311+G, MP3/6-311+G and MP4(SDTQ)//MP3/6-311+G levels of theory. On the calculated potential energy surface twelve distinct minima were located all of which were not predicted to have imaginary frequencies at the B3LYP level of theory. The calculated lowest energy minimum in the potential curves of both molecules was predicted to correspond to the Gauche-gauche-trans (Ggt) conformer in excellent agreement with earlier microwave and electron diffraction results. The equilibrium constants for the conformational interconversion of the two 3-halo-1-propanols were calculated at the B3LYP/6-311+G level of calculation and found to correspond to an equilibrium mixture of about 32% Ggt, 18% Ggg1, 13% Tgt, 8% Tgg and 8% Gtt conformations for 3-chloro-1-propanol and 34% Ggt, 15% Tgt, 13% Ggg1, 9% Tgg and 7% Gtt conformations for 3-bromo-1-propanol at 298.15K. The nature of the high energy conformations was verified by carrying out solvent experiments using formamide ( epsilon=109.5) and MP3 and MP4//MP3 calculations. The vibrational frequencies of each molecule in its three most stable forms were computed at the B3LYP level and complete vibrational assignments were made based on normal coordinate calculations and comparison with experimental data of the molecules.     

Investigation of conformational stability and vibrational spectra of halomethylsulfonyl isocyanates

The conformational behavior and structural stability of chloro- and fluoromethylsulfonyl isocyanates were investigated by quantum mechanical DFT and ab initio MP2 calculations. The 6-311++G^** basis set was employed to include polarization and diffuse functions in the calculations. The molecules were found to exist in a mixture of two stable gauche conformations. The potential scans were calculated from which the rotational barriers could be estimated. The vibrational frequencies and spectra were computed at B3LYP/6-311++G^** level. The potential energy distributions were then calculated to provide tentative vibrational assignment for the normal modes of the stable conformers of both molecules.     

Substituent effects on structural stability of formyl ketene and analysis of vibrational spectra of formyl haloketenes and formyl methylketene.

The conformational behavior and the structural stability of formyl fluoroketene, formyl chloroketene and formyl methylketene were investigated by utilizing quantum mechanical DFT calculations at B3LYP/6-31I + + G** and ab initio calculations at MP2/6-311 + + G** levels. The three molecules were predicted to have a planar s-cis<-->s-trans conformational equilibrium. From the calculations, the direction of the conformational equilibrium was found to be dependent on the nature of the substituting group. In formyl haloketenes, the cis conformation, where the C=O group eclipses the ketenic group, was expected to be of lower energy than the trans conformer. In the case of formyl methylketene the conformational stability was reversed and the trans form (the aldehydic hydrogen eclipsing the ketenic group) was calculated to be about 2 kcal mol(-1) lower in energy than the cis form. The calculated cis-trans energy barrier was found to be in the order: fluoride (15.3 kcal mol(-1)) > chloride (13.1 kcal mol(-1)) > methyl (11.7 kcal mol(-1). Full optimization was performed at the ground and the transition states of the molecules. The vibrational frequencies for the stable conformers of the three ketenic systems were computed at the DFT-B3LYP level, and the zero-point corrections were included into the calculated rotational barriers. Complete vibrational assignments were made on the basis of both normal coordinate calculations and comparison with experimental results of similar molecules.     

吡啶-BH~3相互作用复合物的理论研究

对吡啶-BH~3复合物分别用MP2/6-31+G^*和B3LYP/6-31+G^*进行理论计算以预测该复合物的构型及解离能，得到四种构型，在MP2优化构型基础上作CCSD/6-31+G^*单点能量计算以验证MP2与B3LYP结果的可靠性，然后用B3LYP作振动频率分析，计算了各构型的垂直电离势，最后用更大基组作单点能量计算和自然键轨道(NBO)分析。结果表明，N-B直接相连的构型最稳定，其解离能为141.50kJ/mol,MP2和B3LYP对N-H接近的构型结果相关较大，另外两种构型稳定性介于二者之间，解离能分别为15.18kJ/mol,14.06kJ/mol(MP2/6-31+G^*)。     

Two rotors potential scans and vibrational assignments for dihalomethylsulfonyl isocyanates

The conformational behavior and structural stability of dichloro and difluoromethyl-sulfonyl isocyanates were investigated by quantum mechanical DFT and ab initio calculations. The 6-311 + + G** basis set was employed to include polarization and diffuse functions in the calculation at B3LYP and MP2 levels. The molecules were found to exist in a mixture of trans-gauche and gauche-gauche conformations at ambient temperatures. From the calculations the isocyanate NCO moiety was predicted to nearly eclipse one of the sulfony S=O bonds in the two stable conformers of both molecules. The potential scans for the rotations of the two NCO and CX2H rotors were calculated from which the rotational barriers could be estimated. The vibrational frequencies, potential energy distributions, IR intensities as well as depolarization ratios were calculated.     

Vibrational analyses of sulfamoyl halides NH2SO2X (X is F, Cl and Br)

The structural stability of sulfamoyl halides NH(2)-SO(2)X (X is F, Cl and Br) were investigated by DFT-B3LYP/6-311+G** and ab initio MP2/6-311+G** calculations. From the calculations the molecules were predicted to exist only in the anti (XS bond is anti with respect to nitrogen lone pair) conformation with the possibility of very low abundance of the syn (SO(2) and NH(2) groups eclipse each other) form of only the fluoride. The equilibrium constant for the syn<-->anti conformational conversion of sulfamoyl fluoride was calculated to be 0.0172 that corresponds to an equilibrium mixture of about 2% syn and 98% anti at 298.15K. The vibrational frequencies were computed at DFT-B3LYP level for the stable anti conformer of the d(0) and d(2) (ND(2)-SO(2)X) deuterated species of the three molecules. Normal coordinate calculations were then carried out and the potential energy distributions were calculated for the molecules.     

Three rotor potential energy scans, conformational equilibrium constants and vibrational analysis of 3-fluoro-1-propanol CH(2)FCH(2)CH(2)OH

The conformational stability and the three rotor internal rotations in 3-fluoro-1-propanol were investigated by the DFT-B3LYP/6-311+G** and the ab initio MP2/6-311+G** levels of theory. The calculated potential energy curves of the molecule at both levels of theory were consistent with complex conformational equilibria of about 12 minima, all of which were predicted to have real frequencies at both the B3LYP and the MP2 levels. The lowest energy minimum in the potential curves of 3-fluoro-1-propanol was predicted to correspond to the Gauche-gauche-trans (Ggt) conformer in excellent agreement with microwave and electron diffraction results. The equilibrium constants for the conformational interconversion of the molecule were calculated and found to correspond to an equilibrium mixture of about 33% Ggt, 14% Ggg1 and 13% Gg1g and about 43% Ggt, 12% Ggg1 and 10% Gg1g distribution by the B3LYP/6-311+G** and the MP2/6-311+G** calculations, respectively, at 298.15K. The vibrational frequencies of each molecule in its three stable forms were computed at B3LYP level and complete vibrational assignments were made based on normal coordinate calculations and comparison with experimental data of the molecule.     

Conformational analysis and vibrational assignments of 2,2,3,3-tetrafluoro-1-propanol CHF2CF2CH2OH as three-rotors system

The conformational stability of 2,2,3,3-tetrafluoro-1-propanol was investigated by DFT-B3LYP/6-311+G** and ab initio MP2/6-311+G** calculations. The calculated potential energy curves of the molecule at DFT-B3LYP level were consistent with five distinct minima that correspond to gauche(-)-gauche-gauche (G1gg), trans-trans-gauche (Ttg), trans-gauche-gauche (Tgg), trans-gauche-gauche(-) (Tgg1) and gauche(-)-gauche-trans (G1gt) conformers in the order of decreasing relative stability. The equilibrium constants for the conformational interconversion of 2,2,3,3-tetrafluoro-1-propanol were calculated and found to correspond to an equilibrium mixture of about 38% G1gg, 28% Ttg, 13% Tgg, 11% Tggt and 10% G1gt conformations at 298.15K. The vibrational frequencies of 2,2,3,3,-tetrafluoro-1-propanol in its five stable forms were computed at B3LYP level and complete vibrational assignments were made based on normal coordinate calculations and comparison with experimental data of the molecule.     

Potential energy scans and vibrational assignments of cyclopropanecarboxylic acid and cyclopropanecarboxamide

The structural stability and internal rotations in cyclopropanecarboxylic acid and cyclopropanecarboxamide were investigated by the DFT-B3LYP and the ab initio MP2 calculations using 6-311G** and 6-311+G** basis sets. The computations were extended to the MP4//MP2/6-311G** and CCSD(T)//MP2/6-311G** single-point calculations. From the calculations the molecules were predicted to exist predominantly in the cis (C=O group eclipses the cyclopropane ring) with a cis-trans barrier of about 4-6kcal/mol. The OCOH torsional barrier in the acid was estimated to be about 12-13kcal/mol while the corresponding OCNH torsional barrier in the amide was calculated to be about 20kcal/mol. The equilibrium constant k for the cis<-->trans interconversion in cyclopropanecarboxylic acid was calculated to be 0.1729 at 298.15K that corresponds to an equilibrium mixture of about 85% cis and 15% trans. The vibrational frequencies were computed at the DFT-B3LYP level. Normal coordinate calculations were carried out and potential energy distributions were calculated for the low energy cis conformer of the molecules. Complete vibrational assignments were made on the basis of normal coordinate calculations and comparison with experimental data of the molecules.     

Conformational stability from variable temperature infrared spectra of krypton solutions, ab initio calculations, vibrational assignment, and r0 structural parameters of 1,3-difluoropropane

The infrared spectra (3200-400 cm(-1)) of krypton solutions of 1,3-difluoropropane, FCH2CH2CH2F, at variable temperatures (-105 to -150 degrees C) have been recorded. Additionally, the infrared spectra (3200-50 cm(-1)) of the gas and solid have been recorded as well as the Raman spectrum of the liquid. From a comparison of the spectra of the fluid phases with that in the solid, all of the fundamental vibrations of the C2 conformer (gauche-gauche) where the first gauche indicates the form for one of the CH2F groups and the second gauche the other CH2F, and many of those for the C1 form (trans-gauche) have been identified. Tentative assignments have been made for a few of the fundamentals of the other two conformers, i.e. C2v (trans-trans) and Cs (gauche-gauche'). By utilizing six pairs of fundamentals for these two conformers in the krypton solutions, an enthalpy difference of 277 +/- 28 cm(-1) (3.31 +/- 0.33 kJ mol(-1)) has been obtained for the C2 versus C1 conformer with the C2 conformer the more stable form. For the C2v conformer, the enthalpy difference has been determined to be 716 +/- 72 cm(-1) (8.57 +/- 0.86 kJ mol(-1)) and for the Cs form 971 +/- 115 cm(-1) (11.6 +/- 1.4 kJ mol(-1)). It is estimated that there is 64 +/- 3% of the C2 form, 34 +/-3% of the C1 form, 1% of the C2v form and 0.6% of the Cs conformer present at ambient temperature. Equilibrium geometries and total energies of the four stable conformers have been determined from ab initio calculations with full electron correlation by the perturbation method to second order as well as by hybrid density functional theory calculations with the B3LYP method using a number of basis sets. The MP2 calculations predict the C1 conformer stability to be slightly higher than the experimentally determined value whereas for the C2v and Cs conformers the predicted energy difference is much larger than the experimental value. The B3LYP calculations predict a better energy difference for both the C1 and C2v as well as for the Cs conformers than the MP2 values. A complete vibrational assignment is proposed for the C2 conformer and many of the fundamentals have been identified for the C1 form based on the force constants, relative intensities and rotational-vibrational band contours obtained from the predicted equilibrium geometry parameters. By combining previously reported rotational constants for the C2 and C1 conformers with ab initio MP2/6-311 + G(d, p) predicted parameters, adjusted r0 parameters have been obtained for both conformers. Comparisons are made with the parameters obtained for some other molecules containing the FCH2 group. The spectroscopic and theoretical results are compared to the corresponding properties for some similar molecules.     

Comparison of experimental and density functional study on the molecular structure, infrared and Raman spectra and vibrational assignments of 6-chloronicotinic acid

The experimental and theoretical study on the structures and vibrations of 6-chloronicotinic acid (6-CNA, C(6)H(4)ClNO(2)) are presented. The Fourier transform infrared spectra (4,000-50 cm(-1)) and the Fourier transform Raman spectra (3,500-50 cm(-1)) of the title molecule in solid phase have been recorded, for the first time. The geometrical parameters and energies have been obtained for all four conformers from DFT (B3LYP) with different basis sets calculations. There are four conformers, C1, C2, C3, and C4 for this molecule. The computational results diagnose the most stable conformer of 6-CNA as the C1 form. The vibrations of the two stable and two unstable conformers of 6-CNA are researched with the aid of quantum chemical calculations. The molecular structure, vibrational frequencies, infrared intensities and Raman scattering activities and theoretical vibrational spectra were calculated a pair of molecules linked by the intermolecular OH...O hydrogen bond. The spectroscopic and theoretical results are compared to the corresponding properties for 6-CNA stable monomers and dimer of C1 conformer.     

Probing furanose ring conformation by gas-phase computational methods: energy profile and structural parameters in methyl beta-D-arabinofuranoside as a function of ring conformation

The potential energy surface of methyl beta-D-arabinofuranoside (3) has been studied by ab initio molecular orbital (HF/6-31G) and density functional theory (B3LYP/6-31G) calculations via minimization of the 10 possible envelope conformers. The partial potential energy surface identified that the global minimum and lowest energy northern conformer was E(2). In the HF calculations, (2)E was the most stable southern conformer, while the density functional theory methods identified (4)E as the local minimum in this hemisphere. Additional calculations at higher levels of theory showed that the B3LYP-derived energies of many of the envelope conformers of 3 are dependent upon the basis set used. It has also been demonstrated that B3LYP/6-31+G//B3LYP/6-31G single point energies are essentially the same as those obtained from full geometry optimizations at the B3LYP/6-31+G level. The northern and southern minima of the B3LYP/6-31+G surface are, respectively, the E(2) and (2)E conformers. The B3LYP/6-31G geometries were used to study the relationship between ring conformation and various structural parameters including bond angles, dihedral angles, bond lengths, and interatomic distances.     

Low-frequency vibrations specific for conformers of 1-aminoindan studied by UV-UV hole-burning spectroscopy

The UV-UV hole-burning spectra of the jet-cooled 1-aminoindan were measured for the first time. Complicated spectral features observed in the laser-induced fluorescence excitation spectrum due to two conformers, R and B, were firmly separated. On the basis of fluorescence measurements and B3LYP/cc-pVTZ calculations, low-frequency ring twisting and ring puckering modes were assigned. These modes are coupled in the S1 state due to the Duschinsky rotation. The Duschinsky matrix was calculated from the normal modes predicted by quantum chemical calculations. The coupling between the twisting and puckering modes for conformer B is stronger than that for conformer R. The twisting mode was observed at 0+99 cm(-1) in the S1 state for conformer B, while not for conformer R. The Franck-Condon activity of the twisting mode substantially differs between the two conformers. The transition to the twisting level for conformer B would be allowed by the Duschinsky rotation. The fluorescence lifetime of conformer vibronic levels was also measured and differed for each conformer.     

FT-IR, FT-Raman spectra, density functional computations of the vibrational spectra and molecular conformational analysis of 2,5-di-tert-butyl-hydroquinone

The purpose of finding conformer among six different possible conformers of 2,5-di-tert-butyl-hydroquinone (DTBHQ), its equilibrium geometry and harmonic wavenumbers were calculated by the B3LYP/6-31G(d,p) method. The infrared and Raman spectra of DTBHQ were recorded in the region 400-4000 cm(-1) and 50-3500 cm(-1), respectively. In addition, the IR spectra in CCl(4) at various concentrations of DTBHQ are also recorded. The computed vibrational wavenumbers were compared with the IR and Raman experimental data. Computational calculations at B3LYP level with two different basis sets 6-31G(d,p) and 6-311++G(d,p) are also employed in the study of the possible conformer of DTBHQ. The complete assignments were performed on the basis of the potential energy distribution (PED) of the vibrational modes, calculated using VEDA 4 program. The general agreement between the observed and calculated frequencies was established.     

A theoretical investigation of the low energy conformers of the isomers glycine and methylcarbamic acid and their role in the interstellar medium

We have theoretically investigated the low energy conformers of neutral glycine (NH(2)CH(2)COOH) and its isomer methylcarbamic acid (CH(3)NHCOOH) in the gas phase. A total of 16 different levels of the theory, including CCSD(T), MP2 and B3LYP methods with various Pople and Dunning type basis sets with and without polarization and diffuse functions were used. We found eight low energy glycine conformers, where the heavy atoms in three have a planar backbone, and four low energy methylcarbamic acid conformers all with non-planar backbones. Interestingly at all levels of theory, we found that the most stable methylcarbamic acid conformer is significantly lower in energy than the lowest energy glycine conformer. The MP2 level and single point CCSD(T) calculations show the lowest energy methylcarbamic acid conformer to be between 31 to 37 kJ mol(-1) lower in energy than the lowest energy glycine conformer. These calculations suggest that methylcarbamic acid might serve as a precursor to glycine formation in the Interstellar Medium (ISM). We also report the theoretical harmonic vibrational frequencies, infrared intensities, moment of inertia, rotational constants and dipole moments for all of the conformers. In order to understand how glycine or methylcarbamic acid might be formed in the ISM, larger calculations which model glycine or its isomer interacting with several surrounding molecules, such as water, are needed. We demonstrate that B3LYP method should provide a reliable and computationally practical approach to modeling these larger systems.     

Density functional theory studies of conformational stabilities and rotational barriers of 2- and 3-thiophenecarboxaldehydes

The molecular structures, conformational stabilities, and infrared vibrational wavenumbers of 2-thiophenecarboxaldehyde and 3-thiophenecarboxaldehyde are computed using Becke-3–Lee–Yang–Parr (B3LYP) with the 6-311++G** basis set. From the computations, cis-2-thiophenecarboxaldehyde is found to be more stable than the transfer conformer with an energy difference of 1.22 kcal/mol, while trans-3-thiophenecarboxaldehyde is found to be more stable than the cis conformer by 0.89 kcal/mol. The computed dipole moments, structural parameters, relative stabilities of the conformers and infrared vibrational wavenumbers of the two molecules coherently support the experimental data in the literature. The normal vibrational wavenumbers are characterized in terms of the potential energy distribution using the VEDA4 program. The effect of solvents on the conformational stability of the molecules in nine different solvents is investigated using the polarizable continuum model.     

Normal coordinate analyses and barrier to internal rotation of nitroso- and nitroazides

The conformational and structural stability of nitrosoazide NNN-N=O and nitroazide NNN-NO2 were investigated by DFT-B3LYP and ab initio MP2 calculations with 6-311++G** basis set. From the calculations, nitrosoazide was predicted to exist predominantly in the planar trans (NNN and N=O groups are trans to each other) structure with high trans-cis rotational barrier of about 11 kcal mol-1 as a result of pronounced conjugation between the azide group and the N=O bond. The NO2 rotational barrier in nitroazide was predicted from the symmetric potential function to be of about 7 kcal mol-1. The vibrational frequencies were calculated at the DFT-B3LYP level and the infrared and Raman spectra of the cis-trans mixture were plotted. Complete vibrational assignments were made on the basis of normal coordinate calculations for the stable conformers of both molecules. For nitrosoazide, the calculated wavenumbers were compared to the corresponding experimental values obtained from early reported Raman spectrum of the molecule.     

Photoelectron imaging of propanal by resonant multiphoton ionization via the 3s Rydberg state

We report the conformationally- and vibrationally-selected photoelectron spectroscopy of propanal obtained by resonance-enhanced multiphoton ionization (REMPI) using photoelectron imaging. These photoelectron spectra, employing (2 + 1) ionization via the (n, 3s) Rydberg transitions in the range from 365 to 371 nm, confirm that there are two stable conformer origins in the lowest ionic state, the cis conformer with a co-planar CCCO geometry and a gauche conformer with a approximately 119 degrees CCCO dihedral angle. From ab initio calculations at the B3LYP/6-311++G** level, we find the gauche conformer is slightly more stable, with the energy difference between two conformers determined to be only 65 cm(-1). In our photoelectron spectra, the vertical ionization potential (IP) for the cis conformer of propanal was then determined to be 9.999 (+/-0.003) eV, while that of the gauche conformer of propanal was estimated to be 9.944 eV. A long vibrational progression in the in-plane CCCO deformation vibrational mode, v, for the cis conformer is systematically observed in all photoelectron spectra in which this mode is excited, suggesting that the geometry of the ground ionic state is significantly different from that of the 3s Rydberg state, particularly along the v(15) coordinates.     

Ring inversion, structural stability and vibrational assignments of sulfolane c-C4H8SO2 and 3-sulfolene c-C4H6SO2

The structural stability of sulfolane (tetrahydrothiophene1,1-dioxide) and 3-sulfolene (dihydrothiophene1,1-dioxide) was investigated by DFT-B3LYP and ab initio MP2 calculations with 6-311+G**) basis set. The calculated symmetric ring-puckering potential of 3-sulfolene at the B3LYP level is consistent with a flat minimum that corresponds to a planar ring but at the MP2 level with a double minimum with a low barrier of about 193calmol(-1) to ring planarity in reasonable agreement with experimental results. From the calculations at the two levels of theory sulfolane was predicted to exist predominantly in the twist conformation. The vibrational wavenumbers were calculated at the MP2/6-31G** level of theory and the potential energy distributions PED among the symmetry coordinates of the normal modes were computed for the low-energy structure of the molecules. Complete vibrational assignments were provided on the basis of the calculated PED values. The experimental infrared and Raman spectra of the two molecules were compared to the calculated ones.