模拟封闭声场脉冲响应的圆锥束跟踪法

本文简要介绍了声场脉冲响应计算机模拟技术的基本状况,给出了一种将虚源法和声线法相结合的模拟方法－圆锥束跟踪法的原理和算法,并将其对一个实例的计算结果与虚源法进行了比较,最后对其实现过程中需要注意的问题进行了讨论。     

适用于任意形状封闭空间的声场预测相干模型

针对现有几何声学的方法对封闭空间内声场进行预测时在中低频段出现较大误差的问题,该文提出一种近似圆锥声束追踪法和相干反射场理论相结合的声场预测新模型。在近似圆锥声束追踪法基础上,考虑声束轴线在边界多次反射时声压和相位的改变,最后计算不同声波之间的干涉效应,建立一种适用于任意形状封闭空间的声场预测相干模型。利用该模型对某一矩形封闭空间进行声场预测,通过对边界元法、Raynoise软件相干和非相干算法的预测结果和本模型的数值模拟结果对比。结果表明,文中提出的方法和边界元法的计算结果在中低频段非常吻合,两者的计算结果平均绝对误差为1.1 d B。本模型在中低频率下与同样考虑了相位的Raynoise相干算法相比有更好的准确性,在较高频率上,本模型计算结果与Raynoise相干算法计算结果非常吻合。     

矩形表面波探头声场的高斯声束叠加法

利用矩形压电晶片和有机玻璃楔块折射可激励出超声表面波,广泛用于固体近表面缺陷检测和材料特性测量.由于描述表面波三维声场的理论方法还鲜有报道,因而主要采用简化的表面波二维声场模型来定量分析这类问题.高斯声束模型近些年被广泛应用于解决超声体波传播的各种复杂问题,然而,目前还没有将其扩展应用到超声表面波的声场的计算中.通过结合表面波格林方程和矩形换能器的高斯声束模型,推导出基于高斯声束叠加的表面波三维声场解析解.进一步,将该方法与点源叠加的数值解进行了分析比较,计算结果表明表面波声场的高斯声束叠加方法在具有较好计算精度的同时,还具有更快的计算效率.     

束晕-混沌控制中的粒子跟踪模拟研究

运用PIC程序研究了强流离子束中粒子的横向运动，发现了不加控制时束晕粒子并非一直处于晕区和施加非线性控制后粒子的横向运动被限制在一定的范围内形成环状，以及均方根半径的变化近似成为周期运动等性质.根据观察到的均方根半径及其变化率的规律性，提出了一种新的自适应控制器.用该控制器不仅能在很短的时间内完全控制住束晕，而且不需要对增益因子进行精确计算，也能在系统参数改变的情况下取得较好的控制效果. 关键词： 束晕_混沌 粒子跟踪 数值模拟 自适应控制     

基于多元高斯声束模型的圆柱体超声检测声场仿真

为了提高圆柱体缺陷检测的准确性,需了解其超声声场分布。针对圆柱体实际检测的要求,本文采用超声水浸检测法。通过多元高斯声束模型分别模拟了实心圆柱体及空心圆柱体中的辐射声场,计算仿真了垂直入射与倾斜入射至圆柱体时的声场,实现了检测声场的可视化。通过计算得出仿真结构与实际理论相符,表明本论文的方法能够应用在圆柱体结构超声声场仿真中。     

小尺度阻尼边界封闭空间声传递函数的有限元素法计算

如何求解阻尼边界封闭空间中声源点到接收点的低频声传递函数已成为目前小尺度封闭空间可听化技术研究的关键技术，能处理任意形状及复杂边界条件的有限元素法可作为求解该问题的适合方法，以室内声声有源Helmholtz方程及其相应边界方程为基础，本文推导出了用于小尺度阻尼边界封闭空间声传递函数的有限元素求解方法，并编制了相应的计算机程序，在算例中，首先通过与模态叠加法计算结果进行比较，验证了该方法的正确性。最后计算了某型车体内腔中任意两点间声传递函数。     

双层界面下非近轴近似多元高斯模型的相控阵声场模拟

非近轴近似多元高斯模型克服了近轴近似条件的限制,能保证较大偏转角度下模拟声场的精确度和效率。根据双层介质的瑞利积分模型和单层介质的非近轴近似多元高斯模型,推导出双层介质中基于非近轴近似多元高斯模型的单阵元辐射声场计算模型。并在得到各阵元声束偏转聚焦的延迟时间基础上,累加得到基于非近轴近似高斯模型的超声相控阵横波检测辐射声场计算模型。模拟计算带丙烯酸树脂楔块的超声相控阵探头在钢中横波检测的声束偏转与偏转聚焦辐射声场,并与近轴近似多元高斯模型的横波检测声束的偏转聚焦辐射声场进行比较分析。对比分析结果表明非近轴近似多元高斯模型计算速度更快,用时约为近轴近似多元高斯模型的1/13。此外,非近轴近似高斯模型方法横波检测的聚焦声束覆盖区域更大,能量更集中,更适于远场区域检测。     

复杂封闭声场面板声学贡献度识别的等效源法

针对由复杂结构振动形成的封闭空间声场,提出了一种基于等效源法的面板声学贡献度分析方法。该方法首先利用基于等效源法的内部声全息技术,重构出振动结构表面的法向振速并实现对整个内部封闭声场的预测。再将振动结构的每个面板在腔体内部场点产生的声压分别用位于空腔表面附近的等效源在该点产生的辐射声压代替,将复杂的封闭非自由声场问题转化为简单的内部自由场问题,结合重建出的结构表面法向振速进而识别出封闭振动结构各面板对腔体内任意位置的声学贡献度。通过对复杂结构内声场的数值仿真和验证实验,分析了等效源的数量及与重建面距离等参数对重建精度的影响,结果表明所提方法不仅能够达到传统数值分析方法的计算精度,而且具有更简单的求解过程。     

EAST中性束注入角度的NUBEAM模拟研究

采用蒙特卡罗程序NUBEAM对EAST NBI上的中性束注入角度(中性束系统中心线与注入窗口轴线的夹角)进行了分析。讨论了中性束注入角度对电流驱动效率、加热效率和束的穿透功率的影响,对EAST NBI系统选取了一个最优的注入角度。模拟结果表明：对EAST NBI系统,在典型的EAST实验参数和实际工程允许的范围内,19.5°是最优的注入角度。在此注入角度下,可以通过增大等离子体密度的方法来进一步提高加热效率和电流驱动效率,并减少束的穿透功率。     

宽角束传播法用于计算透射光栅特性

基于Pade近拟，并在透明边界条件下利用宽角束传授法对透射光栅的性质进行了详细的分析。介绍了所使用的数值模拟方法的理论模型，并对高斯光束通过光栅后的光场分布和光栅的衍射效率进行了数值求解。     

An approximate treatment of reflection coefficient in the phased beam tracing method for the simulation of enclosed sound fields at medium frequencies

The phased beam tracing method (PBTM) was suggested as a medium-frequency simulation technique for the calculation of impulse response, although main assumptions of geometric acoustics still hold. The phased method needs the reflection coefficient for characterizing the acoustic property of a surface and the complex wave number for describing the propagation characteristics. In this study, two types of approximate real reflection coefficients derived from the measured absorption coefficient were tested for a practical applicability. As a test example, pressure impulse responses and energy impulse responses computed from the PBTM were compared with those from the measurement and the ordinary beam tracing method. The PBTM employing the approximate reflection coefficients greatly increased the accuracy of the prediction compared to the ordinary beam tracing method, in particular at the medium-frequency range in octave bands above the Schroeder cutoff frequency. A comparison was made between angle-dependent and angle-independent reflection coefficients in the calculation of acoustic measures. Although the angle-dependent reflection coefficient yielded best matched results with measured data, but the simple angle-independent reflection coefficient can be also used with a reasonably good precision.     

基于声粒子分布积分的无网格声场计算方法

小尺度封闭空间内部声场的数值计算是声学设计、噪声控制等领域的关键技术。由于波动声学及几何声学方法计算频率上的限制,中频段声场计算问题一直是个难点。本文以声学无网格法为基础,提出了一种基于声粒子分布积分的无网格声场数值计算方法。文中利用声线跟踪理论计算声场中的声粒子分布,并以某个时间点上的声粒子作为蒙特卡罗法中的积分点,将其应用于无网格法中,从而获得声场中的节点声压。利用该方法对一个矩形封闭空间的中低频声场进行了计算,并与模态叠加法、商用声场计算软件、经典无网格法的结果进行了对比,证明基于声粒子分布积分的无网格声场数值计算方法在中低频段相较于传统基于网格的方法具有更高的精度。     

Sound field prediction in long enclosures with branches: A combined method

The propagation of sound in long enclosures with branches has been studied theoretically and experimentally, and an efficient combined method is proposed to predict the sound field in long enclosures with branches. Based on the wave-acoustics theory, the theoretical analysis of the sound field of the long enclosures with branches is performed. This paper also investigated the sound field prediction of long enclosures with branches, by using the acoustic modeling program, ODEON. The results obtained by the theoretical analysis and the numerical simulation ODEON are compared with the experimental measurements, and the characteristics of the two methods for predicting the sound field of long enclosures with branches are analyzed. Compared with the experimental results, it is found that: (1) the results predicted by the theoretical analysis fluctuate relatively large with respect to the source-receiver distance, and the sound pressure level (SPL) attenuation obtained is smaller than that measured; and (2) the results predicted by the numerical simulation is smoother, and the calculated SPL attenuation is larger than that measured. To effectively predict the sound field of long enclosures with branches, a combined numerical method is thus proposed. The effectiveness of the proposed combined method is demonstrated by the scale-model experiments.     

The effect of multiple branches on sound propagation in long enclosures

Since the classical room acoustics can not be used for long enclosures due to the inhomogeneous sound field, much work has been carried out recently to investigate the sound propagation in long enclosures, which are helpful to the acoustic design of practical long enclosures, such as the high-speed railway tunnels. However, most of these works focuses on the straight long enclosures without branches or with one branch. In this paper, the effects of the multiple branches on sound propagation of long enclosures are studied. The sound pressure level (SPL) attenuation, early decay time (EDT), and reverberation time (T30) of long enclosures with multiple branches have been investigated by physical scale models based acoustic experiments. Several interesting results have been obtained concerning the sound propagation of long enclosures with multiple branches. It shows that the sound field of long enclosures with multiple branches is more complex and inhomogeneous than that of the long enclosures without branches or with one branch.     

各向异性焊缝中超声相控阵瞬态声场仿真及缺陷定位方法

针对多层各向异性奥氏体不锈钢焊缝中超声相控阵瞬态声场的仿真问题,提出应用高斯声束等效点源模型计算宽带离散化的多个单频稳态声场,通过傅里叶变换将其拓展为瞬态声场,并分析了声场转换过程的主要影响参数。该方法可快速计算焊缝内部超声相控阵聚焦声场的瞬态能量分布和任意一点的时域波形信号。在此基础上针对多层奥氏体不锈钢焊缝内部缺陷的超声相控阵成像检测问题,提出利用上述时域高斯声束法对多通道缺陷散射信号进行时间反转计算,并根据时域声场焦点确定缺陷位置。最后通过实验,验证使用此方法检测实际奥氏体不锈钢焊缝试块内部缺陷的效果。结果表明,提出的方法能够确定缺陷位置,且计算速度快、运算量小,适合作为多层介质内部缺陷实时成像的声场仿真模型。     

Study on sound propagation in long enclosures with a vertical or inclined branch of different dimensions

As there may be some branches in long enclosures, such as high-speed railway and freeway tunnels, it will make a difference in the sound propagation in long enclosures if we give more consideration to different designs of the branches at the onset of their construction. However, most researches on the sound propagation in long enclosures available are concerned with straight long enclosures. In this paper, the sound pressure level (SPL) attenuation, early decay time (EDT), and reverberation time (RT30) of long enclosures with a vertical or inclined branch of different dimensions have been studied by comparing experimental results from physical scale models of such enclosures with those of the straight long enclosure. This experimental investigation gives interesting results on the behavior of sound propagation in long enclosures with a vertical or inclined branch of different dimensions. When conducting engineering design for long tunnels of the high-speed railway or freeway, it would be appropriate to consider designing the branch of the tunnels into a widened left inclined or right inclined one to provide a better relative SPL than that of other branches with different dimensions. This study further reveals that with an inclined branch of different dimensions, the EDT of the long enclosure will be different. At both 500 and 1000 Hz 1/3 octave bands, the EDT is the shortest when the long enclosure has a left inclined branch and an extended left inclined branch, while the EDT is the longest when the long enclosure has a widened vertical branch. Generally speaking, in the near field (i.e. the source-receiver distance is shorter than the threshold distance), the EDT measurements are similar, while in the far field (i.e. the source-receiver distance exceeds the threshold distance), the EDT is the longest for the straight long enclosure, second longest for the long enclosure with a widened inclined branch, third longest for the long enclosure with a vertical branch, and the shortest for the long enclosure with an extended inclined branch, which is similar to the trend with RT30.     

非规则封闭空间声场建模的Chebyshev-变分法及其固有声学特性分析

针对非规则封闭空间声场建模问题,提出了一种基于Chebyshev-变分原理的声场建模方法。该方法首先选取包络非规则声场的矩形空间并将此矩形空间内的声压函数展开成三重Chebyshev级数形式,然后通过坐标变换得到定义域空间中的声场势能和声场动能,最后按照里茨方法对声场的拉格朗日泛函进行求解,得到声场的特征方程并求得声场固有频率和模态。通过与曲面声场的数值结果对比,验证了本建模方法的正确性和有效性。在此基础上研究具有不同倾角的梯形声场固有特性,分析内部凹槽深度对\     

共振干涉法声速测定中声强减损的讨论

介绍子在共振干涉声速测定中,随接收探头和发射探头的距离增加,声强（能流密度）减小的规律和机制,指出了发射探头活塞式振动是导致能流密度减少的主要原因。