STUDY ON CASTOR OIL POLYURETHANE/POLY (METHYL METHACRYLATE) AB CROSSLINKED POLYMERS

Castor oil polyurethane/poly(methyl methacrylate) AB crosslinked polymers (ABCP) were synthesized by free radical copolymerization of MMA and vinyl-terminated castor oil polyurethane which was obtained from isocyanate-terminated castor oil polyurethane and hydroxyethyl methacrylate The mechanical properties, transition and relaxation, as well as compatibility and morphology of the ABCP were investigated by changing the component. The results show that the ABCP is a semicompatible system and the compatibility of the two components decreases with increasing content of the hard segment. The mechanical and damping properties of the ABCP are obviously superior to that of their homopolymers. The damping value is mainly controlled by cross[ink density of the ABCP but the T-g value by component.     

STEREOREGULARITY OF POLY (METHYL METHACRYLATE) OBTAINED WITH CHIRAL ANIONIC COMPLEX INITIATOR

The stereoregular polymerization of methyl methacrylate (MMA) have been investigatedwith chiral anionic complex initiator[FILi-(-)SP]in toluene, THF and toluene/THF [1/1(v/v)]. The tacticities of PMMAs obtained in the three solvents have been found to be mainly asyndiotactic triads(s-PMMA)with content of 72.3, 67.7 and 71.4%,respectively.     

SYNTHESIS OF POLY(METHYL METHACRYLATE)-SILICA NANO-COMPOSITE

ABSTRACT

Transparent organic/pre-ceramic composite films of poly(methyl methacrylate) [PMMA] and perhydropolysilazane [PHPS] were synthesized by blending poly(methyl methacrylate-co-2-hydroxyethyl methacrylate) [P(MMA-co-HEMA)] random copolymers and PHPS. In the blend films, P(MMA-graft-PHPS) graft copolymers were formed, PMMA and PHPS were microscopically phase-separated in the solid state. Morphology of the microphase separation was investigated by transmission electron microscopy by changing HEMA content of the random copolymers and blend ratio of PHPS to HEMA. To convert PHPS to silica glass, the blend films were calcinated at 100°C. The morphology of the microphase separation of the films was not changed by the calcinations; the calcinated films were transparent. When the molar content of HEMA of P(MMA-co-HEMA) and the molar content of PHPS to HEMA in feed were 14.5% and 150%, respectively, the morphology was well ordered lamellae of PMMA and silica.     

SYNTHESIS OF POLY(METHYL METHACRYLATE)-SILICA NANO-COMPOSITES. II. POLY[METHYL METHACRYLATE-block-(METHYL METHACRYLATE-co-2-HYDROXYETHYL METHACRYLATE)]

ABSTRACT

One kind of poly(methyl methacrylate [MMA]-block-2-hydroxyethyl methacrylate [HEMA]) block copolymer and two kinds of poly[MMA1-block-(MMA-co-HEMA)] block-random copolymers were synthesized by atom transfer radical polymerization. Then, poly(methyl methacrylate) [PMMA]-silica nano composites were synthesized by blending perhydropolysilazane (PHPS: NN-110) and block or block-random copolymers in 1,4-dioxane and casting the blend solutions. All composite films were transparent. Silica and organic domains were microphase separated in the composites. The effects of PHEMA content and blend ratio of PHPS to hydroxyl group on the microphase separation were investigated by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The thermal properties of the composites were investigated by differential scanning calorimetry (DSC) and thermal gravitic analysis (TGA).     

SYNTHESIS OF POLY(METHYL METHACRYLATE)-graft-POLYSTYRENE BY ATOM TRANSFER RADICAL POLYMERIZATION

The radical copolymerization of methyl methacrylate and 2-hydroxyethyl methacrylate was carried out via atomtransfer radical polymerization (ATRP) initiated by ethyl 2-bromoisobutyrate and catalyzed by CuBr/2,2'-bipyridinecomplex. This polymerization proceeds in a living fashion with controlled molecular weight and low polydispersity. Theobtained copolymer was esterified with 2-bromoisobutylryl bromide yielding a macroinitiator, poly(methyl methacrylate-co-2-hydroxyethyl methacrylate-co-2-(2-bromoisobutyryloxy)ethyl methacrylate), and its structure was characterized by ~1H-NMR. This macroinitiator was used for ATRP of styrene to synthesize poly(methyl methacrylate)-graft-polystyrene. Themolecular weight of graft copolymer increased with the monomer conversion, and the polydispersity remained relatively low.The individual grafted polystyrene chains were cleaved from the macroinitiator backbone by hydrolysis and the hydrolyzed product was characterized by ~1H-NMR and GPC.     

STUDY ON FLUORESCENCE BEHAVIOUR OF EU~(3+) CONTAINING POLY(METHYL METHACRYLATE)

Fluorimetry has been used to characterize ionomers synthesized by copolymerization ofmethyl mehacrylate, methacrylic acid and europium methacrylate (EMA). Under excita-tion of UV light at 375 nm no seif-quenching was found in fluorescence of EMA containingionomers at 615nm within the concentration range of 1.6×10~(-2) to 11.49×10~(-2) mol%.This means that the distance between two Eu~(3+) ions is larger than 5nm. In the sameconcentration range seif-quenching took place in europium octanoate (EOA) containingpoly(methyl methacrylate) in which EOA was doped as an additive.     

MORPHOLOGICAL OBSERVATION OF SINGLE-CHAIN POLY (METHYL METHACRYLATE) PARTICLES*

Tapping mode atomic force microscope has been applied to observe single-chain PMMAparticles which were stored for six months at room temperature after sprayed from verydilute solutions in good solvents, good/poor mixed solvents, and a theta solvent. Monodis-perse PMMA standards of molecular weights ranging from 7.90×10~4 to 1.3×10~6 wereused to investigate the effect of molecular weight oh the size of the single-chain PMMAparticles. These single-chain particles showed close to spherical shapes. The morphologyof single-chain PMMA particles of a given molecular weight was found to be identical inspite of different solvents used for solution spraying. Molecular weigh dependence of theparticle dimension was also found. The diameters of single-chain PMMA particles aftercorrection of tlp-geometry effect were compared to the values estimated from molecularweight and density.     

VISCOMETRIC STUDY OF POLY(METHYL METHACRYLATE) AND POLYSTYRENE BLENDS IN DIFFERENT SOLVENTS

The intermolecular interaction between poly(methyl methacrylate) (PMMA) and polystyrene (PS) intetrahydrofuran (THF) and N,N'-dimethyl formamide (DMF) solvents was studied at 28℃ using a dilute solution viscometrymethod. Solvent is believed to play a key role in characterizing the viscosity behavior of the polymer solution. The intrinsicviscosity and viscosity interaction parameter were experimentally measured for the binary (solvent/polymer) and for theternary systems in two solvents. The compatibility of the polymer mixture was discussed in terms of the sign of △b_m. Theresults show that the compatibility of PMMA/PS blend in DMF is larger than that in THF.     

THE EFFECTS OF HINDERED AMINES ON METHYL METHACRYLATE POLYMERIZATION

The effects of hindered amines, such as TMP, TMPM, TUV-770, on MMA and St homopoly-merization have been studied. It was found that in the MMA polymerization initiated with BPO orAIBN, the presence of TMPM, TUV-770 prolonged the induction period and a little change on R_p wasobserved. However, in the presence of TMP R_p increased slightly. The activation energy of poly-merization and polymerization rate equation were determined.     

EFFECTS OF ω-ACRYLOYL POLY (ETHYLENE OXIDE) MACROMONOMER ON EMULSIFIER-FREE EMULSI0N COPOLYMERIZATION OF METHYL METHACRYLATE AND n-BUTYL ACRYLATE*

Well-defined nonionic hydrophilic ω-acryloyl poly(ethylene oxide) macro-monomer (PEO-A) has been prepared by living anionic polymerization of ethylene oxidewith diphenyl methyl potassium as the initiator and acryloyl chloride as the reaction termi-nating agent. The polymer was characterized by FTIR and SEC. The emulsifier-free emul-sion polymerization of methyl methacrylate (MMA) and n-butyl acrylate (BA) containingvarious concentrations of PEO-A was studied. In all cases stable emulsion coplymerizationsof MMA and BA were obtained. The stabilizing effect was found to be dependent on themolecular weight and the feed amount of the macromonomer.     

POLYMERIZATION OF ETHYLENE METHYL PHOSPHATE IN THE PRESENCE OF SODIUM POLY(ETHYLENE GLYCOL)ATE*

Poly(ethylene methyl phosphate)-poly(ethylene glycol)-poly(ethylene methyl phosphate) triblockcopolymers carrying hydroxyl group at both chain ends were synthesized with sodium poly(ethyleneglycol)ate as initiator. The effects of the factors such as solvent, amount of the initiator and reaction timewere investigated. The copolymers were characterized by IR, ~1H-NMR, ~1H{~(31)P}-NMR, ~(13)C-NMR, ~(31)P{~1H}-NMR, and DSC. High molecular weight of the copolymer and high yield of the polymerization were achievedwithin 3 min at 25℃. The polymerization process was studied by ~(31)P{~1H}-NMR and transesterification wasfound during longer polymerization time.     

聚甲基丙烯酸甲酯单分子膜的原子力学显微镜研究

报道了利用原子力显微镜（ＡＦＭ）技术对聚甲基丙烯酸甲酯（ＰＭＭＡ）单分子膜进行分子结构水平的观察研究．由ＡＰＭ图像中得到的ＰＭＭＡ单体所占面积与用π－Ａ曲线中换算出液面上ＰＭＭＡＬａｕｇｍｕｉｒ膜中单体的面积符合得很好．从ＡＦＭ图像中可见ＰＭＭＡＬＢ膜中ＰＭＭＡ的线型碳链是与档板（ｂａｒｒｉｅｒ）平行的紧密排列，与ＬＢ提膜方向相垂直．并由此对ＰＭＭＡＬＢ膜的形成过程进行分析．此外，还观察到了在Ｓｉ基底上ＰＭＭＡ直链的卷绕伸直排列形态，初步分析了其形成原因．     

AN ATOMIC FORCE MICROSCOPY STUDY ON THE AGGREGATION OF ISOTACTIC POLY（METHYL METHACRYLATE）

Aggregation process of isotactic poly(methyl methacrylate) (i-PMMA) has been studied extensively for many years, and considerable progress has been made in both experimental and theoretical studies. They are, however, seldom sustained by real-space observations of the underlying morphology. In this paper, the aggregation process of i-PMMA in concentrated acetone solutions and the fractal structure of the resulting three-dimensional clusters were characterized on the basis of real-space AFM observations of their two-dimensional projection. It was found that spherical multiple-chain particles formed upon collapse and aggregation of the involving chains as a whole during quenching the solution to room temperature. By keeping the solution at room temperature, the initially formed particles stick together upon contact to form larger particles through reassembling very slowly. The succeeding collision of the enlarged spherical particles leads to the formation of small clusters. These newly formed small clusters grow when they meet with other clusters or single Brownian particles. This leads to the formation of large clusters with fractal dimension of 1.95$±0.05, which suggest a reaction-limited cluster aggregation of i-PMMA in a concentrated acetone solution. This is in accordance with the conclusion obtained by light scattering measurements.     

STUDY ON LIQUID CRYSTALLINITY OF POLY(N-VINYLCARBAZOLE)

The liquid crystallinity of poly(N-vinylcarbazole) was studied by using powder X-ray diffraction, polarized opticalmicroscopy, and differential scanning calorimetry. The results show that the lower molecular weight fractions of this polymerdo not form a liquid crystalline phase, while the samples of sufficiently high molecular weight do form a mesophase attemperatures above the glass transition. The lowest value of the degree of polymerization for PVK to form a stable liquidcrystalline phase was found to be in the range of 150 to 200, significantly higher than the value of 50 for most conventionalside chain liquid crystaline polymers.     

STUDIES ON POLYMERIZATION KINETICS OF METHYL METHACRYLATE AT HIGH CONVERSION

The bulk polymerization of methyl methacrylate which was carried out in a metallic dilatometer and in a differential scanning calorimeter has been studied over the complete course of the reaction. An attempt was made to quantitatively express the relation on the onset of gel effect and the final conversion with polymerization conditions such as temperature, kinds and concentration of initiators. It was demonstrated further that the final conversion of polymerization in homogeneous ideal systems is only dependent upon the reaction temperature.     

COMPUTER SIMULATIONS ON UNPERTURBED CONFIGURATIONAL DIMENSIONS OF POLY (METHYL ACRYLATE)

A full-relaxation optimization of molecule and the popular MM2 force field are em-ployed to obtain the geometry parameters and the conformational energy surface of a mesoor a racemic dyad of poly(methyl acrylate) (PMA) with a specified carbonyl-bond orien-tation in side-groups. It is found that the conformational energy maps calculated hereconsiderably differ from those calculated with the rigid molecular model as reported in theearlier studies. The g~- state cannot be omitted in the obtained contour maps. Two impor-tant conformers tg~- and g~(-t) with energy minima were newly detected for a racemic dyad.The analysis on the conformations with energy minima confirmed that the ester groupsare not always perpendicular to the plane defined by the two adjacent skeletal bonds andmay change their relative orientations to meet the requirement of lower energies duringthe conformational state transition. Instead of the early way of adjusting the interactionenergy parameters to fit the experimental data, we attempt to predict unperturbed chaindimensions via the reliable force field and the configurational statistical mechanics. Theproposed scheme with three rotational states identified from the contour maps allowed usto satisfactorily reproduce the experimental dimensions of random PMA chains.     

STUDIES OF THE CRYSTALLIZATION BEHAVIOR IN THE CRYSTALLINE/AMORPHOUS POLYMER BLENDS: POLY(ETHYLENE OXIDE)/POLY(METHYL METHACRYLATE) AND POLY(ETHYLENE OXIDE)/POLY(VINYL ACETATE)

The crystallization process of poly(ethylene oxide) (PEO)/poly(methyl methacrylate) (PMMA)and PEO/poly(vinyl acetate) (PVAc) blends has been characterized by Fourier Transform Infrared(FTIR) spectra in conjunction with Differential Scanning Calorimeter (DSC) measurements. Thecrystallinity of PEO varies consistently with PEO content in PEO/PVAc blends and the PEO/PMMAblends containing 50 wt% or less PMMA. For the PEO/PMMA blends containing 60 wt% ormore PMMA, the crystallinity of PEO decreases more than PEO content but develops with crystal-lization time. These results can be explained in terms of difference between the crystallization tem-perature (T_c) and glass transition temperature (T_g) of the blends as a function of content of amorphouscomponent.     

SiO2粒子对PMMA/SAN共混体系相分离行为的影响

采用小角激光光散射(SALLS)并结合动态流变学方法,考察了气相法二氧化硅(SiO2)粒子的加入对聚甲基丙烯酸甲酯/苯乙烯-丙烯腈无规共聚物(PMMA/SAN)共混体系相行为的影响,得到了添加SiO2粒子前后的相图,发现SiO2粒子对基体相行为的影响与基体的组成有关.对PMMA/SAN(60/40)体系,加入SiO2粒子后相分离温度上升,但并未改变相分离机理,仍为亚稳单相分解过程(spinodal decomposition,SD);而对于PMMA/SAN(30/70)体系,加入SiO2粒子后却降低了体系的相分离温度.该现象可能是SiO2粒子和基体组分界面间组成与PMMA/SAN共混物基体组成的差异造成的.     

POLYMERIZATION OF METHYL METHACRYLATE WITH ORGANOLANTHANIDES AS SINGLE-COMPONENT CATALYSTS*

 It was first found that Ind₂Y(μ-Et)₂AlEt₂ and Ind₂LnN(i-Pr)₂ (Ln = Y, Yb) exhibit extremely high catalytic activity in the polymerization of methyl methacrylate. The reactions can be carried out over a quite broad range of polymerization temperatures from -30 to 50℃. PMMA with high molecular weight (7.8 × l0^-5) and high isotacticity (94%) can be obtained by using Ind₂Y(μ-Et)₂AlEt₂, and narrow molecular weight distribution (M_w/M_n < 1.5) can be obtained by using Ind₂LnN(iPr)₂(Ln = Y, Yb).     

STUDIES ON RADICAL POLYMERIZATION OF METHYL METHACRYLATE INITIATED WITH ORGANIC PEROXIDE-AMINE SYSTEMS

Radical polymerization of methyl mcthacrylate (MMA) initiated with various diacyl peroxideamine systems was studied. Benzoyl peroxide (BPO) and lauroyl peroxide (LPO) were used as diacyl peroxide component, N,N-dimethyl aniline (DMA) and its para substituted derivatives, i.e., N,N-dimethyl-p-toluidine (DMT), p-hydroxymethyl-N,N-dimethyl aniline (HDMA), p-nitro-N,N-dimethyl aniline (NDMA) and p-dimethylamino benzaldehyde (DMAB) were used as amine components. It was found that the peroxide-DMT systems give higher rates of bulk polymerization R_p of MMA than the organic hydroperoxide-DMT systems with the following descending order BPO-DMT>LPO-DMT>CHP (cumene hydroperoxide)-DMT>TBH (tert-butyl hydroperoxide)-DMT. The aromatic tertiary amines possess obvious structural effect on the R_p values in the diacyl peroxideamine system. The overall activation energy of MMA polymerization was determined and thekinetics of polymerization of MMA initiated with BPO-DMT system was investigated.