ＴiB2纳米管的模板法制备及表征

ＴiO2纳米材料在太阳能的储存与利用、光电转换、光致变色及光催化降解大气和水中的污染物等方面具有广阔的应用前景,成为重点研究的课题之一^[1~5],目前,以ＴiＯ２纳米粉体和纳米膜的研究较为普遍,而Ｔi o２纳米管的报道不多,由于纳米比纳米膜具有更大的比表面积,因而具有较高的吸附能力,可望提高ＴiO2的光电转换效率,模板法（包括多孔阳极氧化铝膜（ＰＡＡ）、光刻蚀制备垢纳米模板、聚碳酸酯纳米滤膜等）在制备导电聚合物,金属,碳,无机半导体等纳米管或线型材料方面已得到广泛应用^[6~9],在这些模板中,ＰＡＡ模具有均匀分布的重直于表面的相互平行的密集纳米孔,且孔径,孔间距,膜厚可以通过电化学手段加以控制^[10~13]。     

过渡金属离子置换钛酸纳米管的制备和光催化活性

TiO2纳米粉体和纳米膜材料在光催化降解大气和水中的污染物等方面具有广泛的应用[1]。近年来,以TiO2为原料与浓N aO H反应合成的钛酸纳米管具有比其原料TiO2更大的表面积和孔体积,且对丙烯有光催化氧化降解活性而备受关注[2]。以往在对TiO2纳米粉体和纳米膜材料在光催化研究中,人们发现由于光激发产生的电子与空穴的复合,导致光量子效率很低。为克服这个缺点,人们使用过渡金属离子掺杂等多种手段对TiO2进行改性[3]。但钛酸纳米管相类似的研究还未见报道。对钛酸纳米管的结构和组成的研究表明[4],此纳米管状物的组成是N axH2-xTi3O7,…     

聚3-甲基噻吩修饰量子点硫化铅连接TiO2纳米结构膜的光电化学研究

采用原位化学法在纳米结构TiO2电极上制备了量子点PbS(Q-PbS), 并用电化学方法在TiO2/Q-PbS表面聚合3-甲基噻吩[poly(3-Methylthiophene), PMeT]. 研究结果表明, PMeT和Q-PbS单独修饰纳米结构TiO2电极和PMeT修饰Q-PbS连接纳米结构TiO2电极的光电流产生的起始波长都向长波方向移动; 在可见光区光电转换效率均比纳米结构TiO2的光电转换效率提高显著; PMeT与Q-PbS修饰的纳米结构TiO2之间存在p-n异质结. 在一定条件下p-n异质结的存在有利于光生电子/空穴的分离, 提高了光电转换效率.     

高比表面积TiO_2纳米管的制备与表征

采用一种简单的化学合成方法制备TiO2 纳米管 ,并采用TEM、XRD等分析手段对TiO2 纳米管进行了表征 .考察了不同温度对TiO2 纳米管比表面积及孔体积的影响 .结果表明 ,采用该方法制得的TiO2 纳米管 ,比用模板法制备的TiO2 纳米管的管径小、管形均匀 .此纳米管的比表面积大于 2 0 0m2 /g ,孔体积最大可达 0 .784cm3 /g .     

TiO2单晶的表面光电压谱研究

TiO2由于其优异的光电性质及高的化学稳定性而受到广泛关注,并且被应用于有机污染物光降解[1]、太阳能光电转换[2]等诸多领域.由于制备方法不同,TiO2往往会呈现出不同的光电性质,尽管其晶型与粒度可能相差甚微[3].近年来研究表明,除晶型、粒度等因素外,表面原子排布在决定材料光电性质方面同样有重要贡献[4,5].本文采用表面光电压谱(SPS)及场诱导表面光电压谱(EFSPS)研究了TiO2单晶(001)面的光伏响应.     

ZnO/TiO2纳米管复合材料的制备及光电化学性能研究

采用电化学阳极氧化法制备TiO2纳米管,然后用光化学沉积法在TiO2纳米管表面沉积ZnO纳米颗粒制备ZnO/TiO2纳米复合材料。对样品进行了Raman谱、XRD和SEM表征,通过测定光电流-时间(I-t)和开路电压-时间(OCPT)曲线对ZnO/TiO2纳米复合材料的光电化学性能进行研究。结果表明,沉积ZnO没有改变TiO2的相结构;复合ZnO提高了TiO2的光电性能;在Zn(NO3)2浓度为10-3 mol.L-1的条件下制得的ZnO/TiO2纳米复合材料具有较好的光电性能。     

TiO_2纳米管阵列的制备与稀土掺杂改性研究

在水相中采用阳极氧化法制备了高度有序的TiO2纳米管阵列。探讨了稀土掺杂和染料敏化等因素对TiO2纳米管光电性能的影响,并对样品分别进行了X射线衍射(XRD)、扫描电镜(SEM)、紫外吸收光谱(UV-V is)、荧光光谱(FS)和光电测试等性能测定。实验结果表明,通过稀土(Gd3+,La3+,Y3+)掺杂TiO2纳米管的光电性能都有所提升,其中Y3+掺杂的TiO2纳米管的光电效率和填充因子最高达到0.92%和0.59,Y3+掺杂后染料敏化TiO2纳米管太阳能光阳极的光电转换效率增加了近3.2倍。     

糖葫芦状二氧化钛纳米线阵列的制备及其光催化性能

 采用溶胶-电泳技术,在多孔阳极氧化铝(PAA)模板的有序孔洞中制备了高度取向的糖葫芦状TiO2纳米线阵列光催化剂,通过扫描电镜(SEM)和X射线衍射对样品进行了表征. 结果表明, TiO2纳米线为锐钛矿晶型,纳米线直径与PAA模板的孔径一致,且分布均匀. 纳米线取向性极好,每根纳米线都具有周期性凹凸,形似糖葫芦,因此命名为糖葫芦状TiO2纳米线阵列. 以甲基橙的降解反应评价了光催化剂的活性,与相同条件下制备的TiO2/玻璃膜相比, TiO2纳米线阵列在光照1 h时对甲基橙的降解率达到93.6%, 比前者提高了40.2%, 具有很好的光催化活性.     

背入射Au/TiO2/Au肖特基结紫外探测器

TiO2作为一种宽禁带(3.0~3.2 eV)半导体材料,由于具有优异的物理化学特性和独特的光电特性,在许多领域都展现出广泛的应用前景[1~3].材料的尺寸、结构和形貌能赋予材料一些特殊的性质,近年来人们致力于研究不同形貌的TiO2纳米材料,如TiO2纳米线和纳米管等[4],并将其应用在光催化[5]、太阳能电池[6]和锂离子电池[7]等领域,但关于其在紫外探测器上应用的报道很少[8~10].本文采用水热法在F∶SnO2(FTO)衬底上制备出纵向有序生长的金红石型TiO2纳米线阵列,通过光刻工艺和磁控溅射技术制备了背入射Au/TiO2/Au肖特基结紫外探测器,并测试了其光、暗电流,光响应度及量     

TiO2纳米微粒对聚苯胺性能的影响

纳米微粒具有量子尺寸效应, 其光、电、声及磁等方面的性能与常规材料有显著的不同, 其中以TiO2纳米微粒的电荷载体、光电活性中心、光学微腔和光电特性等特征[1,2]尤为引人注目. 导电聚合物的纳米复合材料是纳米材料的研究热点之一, 在导电材料、电流体和高密度信息存储材料等方面具有良好的应用前景[3]. 在导电聚合物中, 聚苯胺(PANI)因其具有较高的电导率, 原料便宜, 稳定性好而成为目前最有希望获得实际应用的导电聚合物[4～6]. 将纳米微粒和PANI制成复合材料, 其光电性能等与PANI相比均有所改变. 目前已相继有PANI-ZrO2, PANI-MnO2, PANI-SiO2纳米复合材料的报道[7,8], 而有关PANI-TiO2研究工作尚少见报道. 本文制备了PANI-TiO2纳米复合材料, 通过红外光谱、紫外可见光谱及透射电镜等探讨了复合材料的微结构及性能.     

Use of poly(ethylene terephthalate) track membranes as template matrices for the preparation of polymeric nanomaterials based on polypyrrole and poly(<Emphasis Type="Italic">N</Emphasis>-methylpyrrole)

The oxidative polymerization of pyrrole and N-methylpyrrole with the use of template synthesis on poly(ethylene terephthalate) (PET) track membranes was studied. By scanning electron microscopy (SEM), it was found that a polymer film was formed on the surface of membranes and on the walls of membrane pores. The rates of polymerization on the surface of membranes and pore walls, as well as the yield and structure of the polymer film, depend on the membrane parameters (pore length and diameter and membrane porosity), the chemical structure of the monomer, the diffusion of polymerized solutions through template pores, and the temperature.Translated from Khimiya Vysokikh Energii, Vol. 39, No. 1, 2005, pp. 15–20.Original Russian Text Copyright © 2005 by Dobretsova, Ermolaev, Jitariouk, Milinchuk.     

Controlled synthesis of Ag/TiO2 core-shell nanowires with smooth and bristled surfaces via a one-step solution route

Ag/TiO2 core-shell nanowires were synthesized via a one-step solution method without using a template. Interestingly, the shell morphologies can be controlled to be smooth or bristled by altering the reaction temperature. Moreover, the TiO2 shell thickness and bristle length can be tuned by changing the AgNO3 concentration. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected-area electron diffraction (SAED), energy-dispersive X-ray analysis (EDS), X-ray powder diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used to characterize the resultant Ag/TiO2 core-shell nanowires. Moreover, the absorption peaks of our samples are significantly red-shifted compared with those of the uncoated pure silver nanowires, indicating that interaction between the core and shell occurred. On the basis of the experimental results, we proposed a template-induced Oswald ripening mechanism to explain the formation of the Ag/TiO2 core-shell nanowires.     

Size-controllable fabrication of noble metal nanonets using a TiO2 template

We present herein a simple template method for preparing noble metal nanonets with defined sizes. The template utilized is a TiO2 nanotube (NT) array prepared by anodic oxidation of a pure titanium sheet in an electrolyte solution containing sodium fluoride. Uniform NTs with defined sizes are obtained by controlling the anodic potential. Gold nanonets are prepared by electrodepositing gold onto the template and then dissolving the TiO2 template in a 0.2 M HF solution. The pore size of the gold nanonet is determined by the TiO2 NT hole size. The formation mechanism of the nanonet is elucidated from field-emission scanning electron microscopy and transmission electron microscopy. Although a lot of reports have been presented on the synthesis of nanostructure materials, no work has been reported on the template synthesis of gold nanonets. This paper gives a simple and universal way to prepare noble metal nanonets.     

Titania nanoparticles synthesis in mesoporous molecular sieve MCM-41

Nanocrystalline titanium oxide (TiO(2)) is one of the most useful oxide material, because of its widespread applications in photocatalysis, solar energy conversion, sensors and optoelectronics. The control of particle size and monodispersity of TiO(2) nanoparticles is a challenging task. The use of MCM-41, an inorganic template of uniform pore size (2-10 nm), can overcome this difficulty and produce stable nanoparticles of uniform size and shape. Here, we demonstrate the synthesis of titania nanoparticles inside the pores of silica based MCM-41 forming a TiO(2)/Si-MCM composite. Composites are formed in the alcoholic medium by incipient wetness impregnation method. Titania particles of average 3 nm size are obtained. Effect of silica and titania precursors on the quality of nanoparticles has been investigated. The characterization of titania-MCM-41 composites has been carried out using a variety of techniques like UV-vis absorption spectroscopy, X-ray diffraction, FT-IR spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy and photoluminescence spectroscopy. It has been found that the titania particles are co-ordinated with Si-MCM by SiOTi covalent bond.     

Ultralong cadmium hydroxide nanowires: synthesis, characterization, and transformation into CdO nanostrands

Ultralong Cd(OH)2 nanowires were fabricated by a hydrothermal method from Cd(CH3COO)2 x H2O (0.01 mol/L) and C6H12N4 (0.015 mol/L) aqueous solution at 95 degrees C for 16 h without using any templates and were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and high-resolution transmission electron microscopy (HRTEM). The length of the nanowires reached several micrometers, giving an aspect ratio of a few thousands. The formation mechanism of the nanowires is attributed to the oriented attachment of small particles. The growth method for the 1D nanostructure presented here offers an excellent tool for the design of other advanced materials with anisotropic properties. The Cd(OH)2 nanowires efficiently captured negatively charged dye, and the adsorbed dye molecules can be released after the addition of EDTA. The Cd(OH)2 nanowires as template compounds were further transformed into CdO semiconductor nanomaterials with similar morphology by calcination under 350 degrees C in air for 3 h.     

Monodisperse hollow titania nanospheres prepared using a cationic colloidal template

Titania-coated polymeric nanoparticles were synthesized based on the cationic colloidal particles which were prepared by surfactant-free emulsion copolymerization of styrene and butylacrylate in the presence of a cationic monomer, methacryloxyethyltrimethyl ammonium chloride (MOTAC) using azobis(isobutylamidine)hydrochloride (AIBA) as an initiator. These cationic particles were stabilized by poly(vinylpyrrolidone) (PVP). Then, these particles were dispersed in ethanol and mixed with titanium(IV) butoxide. Negatively charged titania precursors were rapidly hydrolyzed onto the cationic surfaces of colloidal particles. Subsequently, the samples were heated to 450 degrees C to form anatase TiO2 and to remove the colloidal template, which resulted in hollow nanospheres. The hollow titania particles were characterized with zeta analyzer, transmission electron microscopy, scanning electron microscopy, light scattering, X-ray diffraction, thermogravimetric analysis and FT-IR.     

Protein nanotubes comprised of an alternate layer-by-layer assembly using a polycation as an electrostatic glue

We present the synthesis and structure of various protein nanotubes comprised of an alternate layer-by-layer (LbL) assembly using a polycation as an electrostatic glue. The nanotubes were fabricated by sequential LbL depositions of positively charged polycations and negatively charged proteins into a porous polycarbonate (PC) membrane, followed by release of the cylindrical core by quick dissolution of the template with CH(2)Cl(2). This procedure provides a variety of protein nanotubes without interlayer cross-linking. The three-cycle depositions of poly-L-arginine (PLA) and human serum albumin (HSA, M(w)=66.5 kDa) into the porous PC template (pore diameter, D(p)=400 nm) yielded well-defined (PLA/HSA)(3) nanotubes with an outer diameter of 419+/-29 nm and a wall thickness of 46+/-8 nm, revealed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations. The outer diameter of the tubules can be controlled by the pore size of the template (200-800 nm), whereas the wall thickness is always constant, independent of the D(p) value. The (PEI/HSA)(3) (PEI: polyethylenimine) nanotubes showed a slightly thin wall of 39+/-5 nm. CD spectra of the multilayered (PEI/HSA)(n) film on a flat quartz plate suggested that the secondary structure of HSA between the polycations was almost the same as that in aqueous solution. The three-cycle LbL depositions of PLA and ferritin (M(w)=460 kDa) or myoglobin (Mb, M(w)=1.7 kDa) into the porous PC membrane also gave cylindrical hollow structures. The wall thickness of the (PLA/ferritin)(3) and (PLA/Mb)(3) nanotubes were 55+/-5 nm and 31+/-4 nm; it depends on the globular size of the protein (ferritin>HSA>Mb). The individual ferritin molecule was clearly seen in the tubular walls by SEM and TEM measurements.     

原位水热合成SrTiO3/TiO2复合纳米纤维及光催化性能

以利用静电纺丝技术制备的TiO2纳米纤维为模板和反应物,原位水热合成了具有异质结构的SrTiO3/TiO2复合纳米纤维.采用X射线衍射(XRD)、扫描电子显微镜(SEM)、能量散射光谱(EDS)、高分辨透射电子显微镜( HRTEM)和X射线光电子能谱(XPS)等测试手段对样品的结构和形貌进行了表征.用罗丹明B(RB)模...     

Polyelectrolyte-surfactant complex as a template for the synthesis of zeolites with intracrystalline mesopores

Mesoporous zeolite silicalite-1 and Al-ZSM-5 with intracrystalline mesopores were synthesized with polyelectrolyte-surfactant complex as the template. Complex colloids were first formed by self-assembly of the anionic polymer poly(acrylic acid) (PAA) and the cationic surfactant cetyltrimethylammonium bromide (CTAB) in basic solution. During the synthesis procedure, upon the addition of the silica source, microporous template (tetrapropylammonium hydroxide), and NaCl, these PAA/CTA complex colloids underwent dissociation and gave rise to the formation of hollow silica spheres with mesoporous shells templated by CTAB micelles and PAA domains as the core. Under hydrothermal treatment, the hollow silica spheres gradually merged together to form larger particles with the PAA domains embedded as the space occupant, which acted as a template for intracrystalline mesopores during the crystallization of the zeolite framework. Amphiphilic organosilane was used to enhance the connection between the PAA domain and the silica phase during the synthesis. After calcination, single crystal-like zeolite particles with intracrystalline mesopores of about 5-20 nm were obtained, as characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and N(2) adsorption measurements. With the addition of an aluminum source in the synthesis, mesoporous zeolite Al-ZSM-5 with intracrystalline mesopores was also synthesized, and enhanced catalytic property was observed with mesoporous Al-ZSM-5 in acetalization of cyclohexanone with methanol.     

Synthesis and Characterization of Magnetic TiO2/SiO2/NiFe2O4 Composite Photocatalysts

Magnetic TiO2/SiO2/NiFe2O4 composite photocatalytic particles with high crystalline TiO2 shell were synthesized via a mild solution route.The prepared composite particles were characterized with X-ray diffraction(XRD),transmission electron microscopy(TEM),high resolution transmission electron microscopy(HRTEM),scanning electron microscopy(SEM),ultraviolet-visible(UV-Vis) spectroscopy and vibrating sample magnetometer(VSM).The results show that the obtained TiO2/SiO2/NiFe2O4 composite particles were composed...