超临界水流化床内煤气化过程建模与仿真(2):气化反应动力学模型及气化规律

本文成功建立了煤超临界水气化动力学模型,其中包括煤在超临界水中热解、液化、固相残碳及液化产物的蒸汽重整等均相和非相反应。该动力学模型能准确反应煤在超临界水中气化特征。在前述第一部分工作的基础上,耦合该气化动力学模型,对煤在超临界水流化床中气化过程进行了建模。通过该模型研究了宽温度参数范围下反应器内典型反应速率、反应组分分布演变规律,揭示了反应器内部化学反应特征与气化规律。研究加深了对超临界水流化床内煤气化过程的认识,对超临界水流化床反应器的优化、放大以及实际运行具有指导意义。     

一类煤与天然气互补利用的新型发电系统

提出一种新型发电系统,通过煤和天然气的互补利用来减少能量转化过程的不可逆损失。煤气化炉采用空气和水蒸气做氧化剂,碳转化率约为60%,未转化部分形成半焦,半焦燃烧释放的热量驱动天然气重整反应,制取合成气。煤部分气化所得气化煤气和半焦燃烧驱动天然气重整所得合成气混合,作为联合循环的燃料。结果显示,新系统的热效率为51.5%,效率为50.3%,天然气折合发电效率为61%。新系统为高效合理利用煤和天然气提供了一种新途径。     

加压喷动流化床煤部分气化数值模型

本文建立了一个加压喷动流化床煤部分气化的数学模型,根据流场对喷动流化床进行了分区,在喷动区采用类似气力输送流动模型,在周边环行区采用流化床模型。模型中考虑了设备几何特性、运行工况和煤质对煤气化的影响,特别是研究了在喷动流化床中蒸汽、空气与煤之间的比例关系以及系统压力对煤气化的影响。模型计算结果表明,系统压力提高可显著提高煤气化速率,空煤比和汽煤比增加也可提高煤气化速率,但煤气热值降低。     

四角切圆炉膛三维温度分布优化控制建模研究

炉膛燃烧三维温度分布可视化技术为实现炉内燃烧三维温度分布优化控制奠定了基础。本文采用数值计算的方法建立了炉内不同高度特征截面平均温度及相应的温度中心坐标作为中间被控变量,以各层各角燃烧器燃料量及一次风、二次风量等参数为输入变量的线性模型。检验结果表明该模型能正确反映输入变量的变化对炉内温度分布的影响,为采用自适应遗传算法实施燃烧优化控制创造了条件。     

双流化床煤气化试验研究

建立了一套3米高的双流化床煤气化试验装置,煤在鼓泡流化床中热解气化,生成的半焦送入循环流化床中燃烧,两床间采用气动控制阀连接.分别采用神华烟煤、龙口褐煤和大同烟煤进行了试验.煤中的碳转化成煤气和烟气的总转化率达到90%以上;冷煤气效率随着窄气/煤比的提高而增加;采用神华煤时焦油产率可达到1.5%;采用龙口褐煤时气化效果较好,在气化炉空气/煤比为0.3 kg/kg时,冷煤气热值为10.7 MJ/Nm3,冷煤气效率为48%.经过分析计算,龙口褐煤产生煤气中的可燃成分主要来自热解.     

超临界水流化床内煤气化过程建模与仿真(1):数学模型及物理场分布规律

煤的超临界水气化是极具发展前景的高效洁净煤炭转化技术.本实验室发明新型超临界水流化床反应器,避免了管式反应器中出现的结焦堵塞现象,实现了高浓度煤浆的高效连续气化.本文对超临界水流化床反应器内的物理过程进行了数学建模,并对宽广的温度参数范围下反应器内温度场、流场、以及颗粒停留时间演变规律等进行数值模拟分析,揭示了反应器内部各物理场的特征,加深了对超临界水流化床内流动传热过程的认识,对反应器的运行与设计具有理论参考价值。     

煤粉在O_2/N_2和O_2/H_2O气氛下着火的实验研究

本文阐述了煤粉颗粒在O_2/N_2和O_2/H_2O气氛下着火的实验研究,氧气浓度为21%,30%,35%,40%和50%。实验在滴管炉中进行,采用高速摄像仪来记录煤粉颗粒在炉内的燃烧情况。实验中采用了烟煤(SF)和贫煤(XW)两种煤粉颗粒,粒径为97~105μm。实验结果表明在相同的氧气浓度下,煤粉颗粒在水蒸气气氛下的着火点位置比在氮气气氛下提前,可能的原因是高水蒸气浓度下水蒸气气化反应和水气转换反应的存在。煤阶对着不同气氛下火点位置间隔有较大的影响。     

碳制氢过程的比较及直接制氢分析

本文对不同碳制氢过程进行了热力学分析,比较了相同进料条件下,采用不同过程进行碳制氢时,过程的冷煤气效率以及最终产物组成,并分析了“一步制氢”中温度、压力、不同进料比对最终产物组成的影响。结果表明,直接制氧适宜的气化温度为923-973 K;增加水蒸气分压力(气化压力随之增加),气体产物的量增加;吸收剂有一最佳的量。     

双高煤干法气化炉的气化试验研究

以高灰熔点高灰分煤的高效气化为背景,提出了一种新型干法煤粉气化炉结构模型,并开展了双高煤在该结构试验炉上的试验研究。结果表明,为了获得较好的气化指标,在试验工况下,合适的氧碳原子比和蒸汽煤比取值区间分别为0.95～1.05和0.05～0.12 kg/kg;典型优化工况下的气化结果表明了该气化炉能够适用于双高煤的高效气化。     

循环床锅炉循环灰对焦油裂解的催化影响

以循环流化床锅炉循环灰为热载体、部分气化产生的半焦为锅炉燃料的煤的蒸汽－煤气联产技术中,降低焦油产率、提高煤气产率是一个努力方向．本文在固定床反应器实验台上以焦油的两种主要组份苯和甲苯为对象,实验研究了一种洗中煤形成的循环友对焦油裂解的催化影响,测定了裂解反应动力学参数,探讨了循环灰对焦油裂解的催化机理．实验结果表明,与热裂解相比,循环灰条件下焦油裂解活化能下降,气态裂解产物总量提高．     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.