聚谷氨酸基双重响应性纳米胶束的制备及药物控释性能

首先制备端氨基聚(N-异丙基丙烯酰胺-co-聚乙二醇)大分子引发剂,再通过端氨基引发L-谷氨酸-γ-苄酯-N-羧酸酐开环聚合,制备了聚(N-异丙基丙烯酰胺-co-聚乙二醇)与聚(L-谷氨酸-γ-苄酯)的嵌段共聚物,将其中的γ-苄酯基团转化为酰肼基团后与阿霉素(DOX)共价结合,最后在水溶液中自组装成纳米胶束,制备了温度和pH值双重响应性纳米胶束。胶束外层由亲水性聚(N-异丙基丙烯酰胺-co-聚乙二醇)组成,具有温敏性,低临界溶液温度为38℃;胶束内层由聚(L-谷氨酸-γ-酰肼-阿霉素)组成。该胶束对于药物的释放具有温度和pH双重敏感性。     

浊度法表征温敏性微凝胶体积的相转变行为

以N-异丙基丙烯酰胺(NIPAM)、甲基丙烯酸(MAA)为单体,N,N-亚甲基双丙烯酰胺(MBA)为交联剂,制备了温敏性聚(N-异丙基丙烯酰胺)(PNIPAM)和具有温度、pH敏感性的聚(N-异丙基丙烯酰胺-co-甲基丙烯酸)(PNIPAM-MAA)微凝胶。通过测定不同温度和pH条件下微凝胶浊度变化,表征微凝胶的温度及pH敏感性,描述了NaCl浓度和pH对微凝胶体积相转变温度的影响。同时,测定了微凝胶的临界聚沉浓度及临界絮凝温度,表征了微凝胶的稳定性,讨论了影响微凝胶的稳定性因素。     

两种环境敏感高分子在相分离免疫分析中的比较研究

进行了两种环境敏感高分子在相分离免疫分析嗜水气单胞菌外膜蛋白(outer membrane protein, OMP)中的比较研究. 首先合成温度敏感高分子聚N-异丙基丙烯酰胺和pH敏感高分子聚(N-异丙基丙烯酰胺-甲基丙烯酸), 分别以N-羟基琥珀酰亚胺丙烯酸酯(NAS)和碳二亚胺(EDCI)作为偶联剂与抗OMP抗体(Ab)偶联形成抗体复合物(Ab-polymer), 在竞争型免疫测定中, OMP标准溶液与异硫氰酸荧光素标记OMP在均相条件下竞争性地与Ab-polymer反应, 调节外界环境分离出高分子免疫复合物沉淀, 重新溶解后荧光法定量, 两种体系的OMP浓度均在400～3000 ng/mL范围内与荧光强度呈良好线性关系, 检出限分别为84.7和39.6 ng/mL. pH敏感高分子相比于温度敏感高分子具有以下优点: 可以在37 ℃的生理温度进行免疫反应, 进一步提高了免疫反应的速度和效率; 可利用高分子本身的活性基团进行Ab的固定, 固定化效率、固定Ab的免疫反应活性较之NAS偶联法得到了提高; 有更高的检测灵敏度. 因此, pH敏感高分子更适合于作为相分离免疫分析的载体.     

热敏相分离荧光免疫分析乙肝表面抗原的新方法

以N-异丙基丙烯酰胺为单体,将水溶性热敏高分子聚异丙基丙烯酰胺(PNIP)和抗体偶联,用异硫氰酸荧光素标记羊抗人乙肝表面抗原抗体,建立了夹心型热敏相分离荧光免疫分析乙肝表面抗原(HBsAg)的新方法.评价了抗体在PNIP上的固定效率和非特异性吸附情况.HBsAg在0.5～100μg/mL范围内与体系荧光强度呈良好的线性关系,检出限为10ng/mLHBsAg.该方法既具有均相免疫分析的快速性,又有固相免疫分析的高灵敏度.用于乙肝病人血清中HBsAg水平的测定,结果令人满意.     

具有智能荧光特性的含二甲氨基查尔酮端基的PNIPAM研究

以偶氮二异丁腈为引发剂,含二甲氨基查尔酮基团的三硫代碳酸酯为链转移剂,在四氢呋喃溶剂中将N-异丙基丙烯酰胺(NIPAM)通过可逆加成断裂链转移(RAFT)自由基聚合制备了具有智能荧光特性的含二甲氨基查尔酮端基的聚N-异丙基丙烯酰胺(PNIPAM-DMAC),并通过红外光谱、核磁共振氢谱和紫外-可见光谱对其结构进行表征.研究了PNIPAM-DMAC聚合物的温敏性以及溶剂极性、温度、分子识别三重敏感的荧光特性.结果表明,PNIPAM-DMAC聚合物的低临界溶解温度(LCST)比聚N-异丙基丙烯酰胺(PNIPAM)聚合物低,且随着PNIPAM-DMAC聚合物分子量的降低、聚合物水溶液浓度的减小和α-环糊精(α-CD)的加入,其LCST温度均升高.随着溶剂极性的增加,PNIPAM-DMAC聚合物的荧光峰值波长基本上随着溶剂极性的增大而红移,荧光强度出现极小值和极大值,在甲醇和水中几乎无荧光,具有溶剂极性敏感的荧光特性;随着温度升高,PNIPAM-DMAC聚合物水溶液荧光强度显著增强,同时伴随荧光发射光谱的蓝移现象,且荧光随温度交替改变而呈现出可逆变化,具有可逆的温度“开/关”特性;α-CD的添加使得PNIPAM-DMAC聚合物水溶液的荧光强度增强,荧光峰值波长轻微蓝移,具有分子识别敏感的荧光特性.     

带活性末端的热敏高分子的制备及其在荧光免疫分析中的应用

合成了带有活性末端的寡聚N-异丙基丙烯酰胺(ONIPAAm),并考察了其温度敏感性质.以ONI-PAAm作为免疫分析的载体与鼠IgG偶联,以四磺基铁酞菁为标记物,以羊抗鼠IgG抗体为分析模型,建立了竞争型热敏相分离荧光免疫分析新系统.羊抗鼠IgG抗体在0～1500ng/mL范围内与体系相对荧光强度呈良好的线性关系,检测限为2ng/mL.     

荧光双重敏感响应型水溶聚合物的合成及其发光性能研究

将丙烯酰氯与荧光素反应,合成出丙烯酸酯单体3-丙烯酰氧基荧光素(Ac-Flu),然后采用自由基溶液聚合法将Ac-Flu与丙烯酰胺(AM)共聚,制备得到含有荧光素生色团的水溶性荧光共聚物poly(Ac-Flu-co-AM).合成单体Ac-Flu和共聚物poly(Ac-Flu-co-AM)采用核磁(NMR),质谱(HR-MS),红外光谱(FTIR),示差扫描量热法(DSC),可见紫外分光光度仪(UV-Vis)等方法进行了结构表征,同时采用荧光光谱对共聚物poly(Ac-Flu-co-AM)的荧光极其荧光对温度和pH敏感响应性进行了测定研究.结果表明,poly(Ac-Flu-co-AM)的水溶液和薄膜在520 nm附近均具有较强的荧光发射.其中,水溶液荧光强度在0～60℃范围内随着温度的升高呈线性下降,表现出较好的温度敏感响应性质.同时,水溶液荧光强度在pH=4～10范围内随着碱性的增强而升高,表现出较好的pH敏感响应性质.     

温度与pH快速响应性P(NIPAM-co-AAc)水凝胶的制备及其性能

以氯化钠水溶液作为反应介质,成功制备了温度与pH快速响应性聚(N-异丙基丙烯酰胺-co-丙烯酸)[P(NIPAM-co-AAc)]水凝胶,研究了氯化钠水溶液的浓度对凝胶性能的影响.通过红外光谱(FT-IR)、扫描电镜(SEM)、测溶胀比对凝胶性能进行了表征.结果表明:凝胶具有相同的化学组成与结构,但具有不同的微观形态;随着反应介质中氯化钠浓度的增加,凝胶在20℃蒸馏水中的平衡溶胀比增大,并表现出较强的温度与pH敏感性以及较快的去溶胀速率.     

一种聚丙烯酸接枝型荧光纳米粒子的制备、性能及细胞成像

将N-氨基-4-N-甲基哌嗪-1,8-萘酰亚胺(AMN)通过酰胺化反应接枝到聚丙烯酸链上,利用生成的聚合物在水溶液中的自组装, 制备了一种水溶性荧光纳米粒子(PAAMN).采用紫外可见光谱、核磁共振氢谱、透射电镜、动态光散射和荧光光谱方法对PAAMN进行了表征,MTT法检测其细胞相容性,最后用荧光显微镜观察其自身荧光及细胞成像效果.实验结果表明, PAAMN为球状结构,萘酰亚胺荧光团的摩尔取代度为4.1%;在生理pH条件下,以390 nm为激发波长,PAAMN在534 nm处发射较强的荧光,且光稳定性较好;在pH 4.0~10.0范围内,其荧光波长无明显变化,荧光强度随pH值增大而逐渐减小,但pH敏感程度小于AMN.PAAMN具有良好的细胞相容性,能进入细胞,且在~390 nm激发光下发射绿色荧光,可用于细胞成像.     

pH和温度敏感型聚合物荧光探针的合成及应用

以萘酰亚胺(NI)、N-异丙基丙烯酰胺(NIPAM)和多面体齐聚倍半硅氧烷(POSS)为原料,通过可逆加成断裂自由基聚合(RAFT)方法,设计合成了具有p H响应和温度敏感的聚合物荧光探针Poly(POSS-NINIPAM)。通过核磁共振波谱仪(NMR)、荧光发射光谱仪和质谱仪(MS)等技术手段表征了Poly(POSS-NINIPAM)的p H和温度的响应性能。结果表明,在p H值5.8~8.0范围内,探针Poly(POSS-NI-NIPAM)的荧光强度变化明显,与p H值呈现良好的线性相关(λem=520 nm,p Ka=6.51),对p H和温度的响应均呈现出良好的循环检测性能,可用于检测活细胞He La的p H值变化。探针Poly(POSS-NI-NIPAM)在检测生物样本中p H/温度变化方面具有潜在的应用前景。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.