超声辐射沉淀法纳米ZnO的制备与表征

以草酸盐为沉淀剂,采用超声辐射沉淀法制备出纳米ZnO粉体,并通过XRD、TG－DTA－DTG、IR和TEM等技术研究了纳米ZnO的合成过程及粉体性能。结果表明,将超声辐射引入了普通沉淀法,可显著提高粉体性能,所得纳米ZnO粒子外貌的球形,粒度分布均匀,分散性好,平均晶粒尺寸为26nm。     

液相沉淀法制备纳米ZnO粉体的研究

现有制备纳米ZnO的方法大多需要较特殊的设备和严格的反应条件[1 4] 。笔者采用液相沉淀法,首先以草酸为沉淀剂直接从硫酸锌水溶液中沉淀出前驱体ZnC2 O4·2H2 O ,然后经过滤、洗涤、干燥和焙烧分解,制得了平均晶体粒径为2 5nm的ZnO粉体。此方法操作简单、反应条件温和、易于控制。但沉淀在洗涤过滤和干燥时易产生团聚现象[7] 。为此采取以稀草酸溶液对制得的前驱体进行超声洗涤和1 2 0℃真空干燥的措施,明显提高了粉体的分散性能。1　实验部分1 1　主要仪器及试剂Zn(SO4) 2 和H2 C2 O4·2H2 O(A .R .)。KS 2 5 0E型超声波清洗仪…     

纳米ZnO的制备及发光特性研究

The samples of nano-size ZnO were prepared by precipitation, hydrolysis, sol-gel method and characterized by X-ray diffraction, Uv-Vis diffuse reflection spectrum, and time resolved luminescent spectrum. The results showed that the crystallite dimensions of all ZnO samples were coarsening with increasing annealing temperature and the grain sizes prepared by sol-gel method were obviously smaller than the others prepared by precipitation and hy-drolysis method. Under excitation of monochromatic light of wavelength 300nm, a strong and broad photolumines-cence (PL) emissions were observed in the wavelength range of 420～780nm. As the grain size decreased, the PL peak positions moved to shorter wavelengths. And as the annealing temperature increased, the peak intensity de-creased. The photoluminescence decay profile of ZnO was well described by three decay components of 46ns, 330ns and 1630ns.     

化学气相沉积法制备ZnO纳米结构薄膜及其SERS活性研究

提供了半导体作为光、电和生物等功能材料的表面和界面信息, 同时也为SERS的研究开拓了新的领域.     

Ag/ZnO纳米纤维的制备及光催化性能

采用静电纺丝技术及煅烧法制备了氧化锌纳米纤维, 然后采用水热法将银纳米颗粒负载到了氧化锌纳米纤维表面. 利用X射线衍射(XRD)、 X射线光电子能谱(XPS)、 能量色散X射线光谱(EDX)、 扫描电子显微镜(SEM)及透射电子显微镜(TEM)等技术对合成的Ag/ZnO纳米纤维的结构和组成进行了表征. SEM结果表明, 直径在5~100 nm之间的银纳米颗粒附着在直径在80~330 nm之间的氧化锌纤维表面形成了异质结构. 以常见的有机污染物甲基橙、 亚甲基蓝和罗丹明B等为降解底物, 对Ag/ZnO纳米纤维的光催化性能进行了表征. 结果表明, 负载银纳米颗粒后, 复合催化剂的光催化性能明显提高.     

纳米ZnO的制备及其光催化性能研究

本文以羟丙基纤维素(HPC)作为分散剂,运用沉淀法制备出了粒径均匀的ZnO颗粒.通过透射电子显微镜(TEM),X射线衍射(XRD),紫外可见光吸收光谱,光致发光谱(PL)对ZnO进行了性能表征,并探讨了其形成机理及制备中的影响因素.利用纳米ZnO作为光催化剂对有机染料罗丹明B进行了光降解实验,实验结果表明,此方法制备的ZnO具有良好的光催化性能,有望在治理环境污染等领域具有良好的应用.     

不同形貌ZnO纳米结构的电子显微分析

控制实验合成条件,利用溶胶-凝胶法和化学溶液生长法制备出不同形貌的ZnO纳米结构。采用X射线衍射仪(XRD)、扫描电子显微镜( SEM) 以及透射电子显微镜(TEM)等多种测试手段对ZnO纳米结构的微观形态及晶相进行了分析。结果表明:3种ZnO纳米结构形貌虽不同,但均具有Z nO六方纤锌矿晶相结构。ZnO纳米棒和花状ZnO纳米结构为单晶,生长方向均沿(0001)方向。ZnO纳米球则为多晶。     

Sb掺杂大尺寸ZnO纳米棒的制备及其特性研究

采用化学气相沉积法,在没有采用任何催化剂的条件下,在Si(100)衬底上成功制备出Sb掺杂大尺寸ZnO纳米棒,并对样品进行了结构和光学性质的表征。结果表明:纳米棒为结晶质量较好的六角纤锌矿结构,在能量色散谱(EDS)中观测到了Sb元素的存在。此外,在低温光致发光(PL)光谱中还观测到了与Sb掺杂相关的中性受主束缚激子发光峰(A0X)、自由电子到受主能级跃迁的发光峰(FA)、施主受主对(DAP)以及DAP的一级纵向光声子伴线(DAP-1LO),因此证实Sb元素作为受主杂质掺杂已进入ZnO晶格。     

纳米ZnO的制备及光催化活性的研究

纳米ZnO由于它的电子结构的特性和潜在的应用受到广泛的关注[1].ZnO既是一个典型的催化材料,又是一类非常有代表性的电化学,光化学半导体材料[2].ZnO的制备国内外有不少报道,如溶胶凝胶法[3]、喷雾干燥法[4]、超声辐射沉淀法[5]等.……     

ZnO/Ag复合纳米粒子的制备与表征

以乙酸锌为前驱物,乙醇为溶剂,油酸钠为表面修饰剂,采用溶液化学法,在乙醇体系中制得纳米Zn O。然后缓慢加入一定量的硝酸银乙醇溶液,在乙醇的还原作用下将Ag+还原为Ag纳米粒子,制得Zn O/Ag复合纳米粒子。通过紫外-可见吸收光谱(UV-Vis)、荧光光谱(FL)、透射电子显微镜(TEM)和X射线衍射(XRD)等方法对所制备的氧化锌-银复合纳米粒子样品进行表征。结果表明,所合成的Zn O/Ag复合纳米粒子为球形,尺寸为20-30nm且粒径分布较窄。Ag纳米粒子附着于Zn O纳米粒子表面,并起到良好的表面修饰作用。对制备Zn O/Ag复合纳米粒子的机理进行了初步探究。     

超声振荡直接沉淀法制备纳米ZnO的工艺研究

在超声振荡下直接沉淀法制备纳米ZnO的关键是控制硝酸锌的浓度、氨水和硝酸锌的配比,以及前驱化合物的焙烧温度、表面活性剂的种类以及加入时间。实验结果表明,用该法制备纳米ZnO,硝酸锌的初始浓度在0.7～1.0 mol/L,氨水和硝酸锌配比为1.0～1.2,在反应10 min后加入表面活性剂油酸钠,15 min后加入聚乙二醇1000,可制备得到30～60 nm的纳米ZnO。     

Fabrication of mesoporous ZnO nanosheets from precursor templates grown in aqueous solutions

Mesoporous ZnO nanosheets were successfully prepared by pyrolytic transformation of zinc carbonate hydroxide hydrate, Zn₄CO₃(OH)₆·H₂O. The nanosheets were initially formed as assemblies on glass substrates during chemical bath deposition (CBD) in aqueous solutions of urea and zinc acetate dihydrate, zinc chloride, zinc nitrate hexahydrate, or zinc sulfate heptahydrate at 80°C. It was key to induce heterogeneous nucleation of Zn₄CO₃(OH)₆·H₂O by promoting a gradual hydrolysis reaction of urea and controlling the degree of supersaturation of zinc hydroxide species. Morphology of Zn₄CO₃(OH)₆·H₂O was largely influenced by the anions present in the CBD solutions. The Zn₄CO₃(OH)₆·H₂O nanosheets were transformed into wurtzite ZnO by heating at 300°C in air without losing the microstructural feature.     

籽晶层制备方式对氧化锌纳米棒阵列的影响

采用3种不同的方式制备ZnO薄膜籽晶层:旋涂、喷雾热解和脉冲激光沉积。对于每一种制备方式,其薄膜的晶体结构、形貌、表面粗糙度等性能分别用X射线衍射(XRD)、扫描电子显微镜(SEM)和原子力显微镜(AFM)进行了表征。之后,通过水热合成方法,在3种籽晶层衬底上制备得到具有不同结构和形貌特征的ZnO纳米棒阵列。结果表明,ZnO纳米棒生长和籽晶层制备方式具有极强的相关性。最后,对两者相关性的生长机理进行了解释。     

Fabrication and Visible Light Photocatalytic Activity of Co-doped ZnO Nanorods

Co-doped ZnO nanorods were prepared by electrochemical deposition method in aqueous solution. lb study the as-grown samples, several characterizations were carried out. The scanning electron microscopy（SEM） images show that the samples present a rod-like shape with hexagonal cross sections and roughened surthce. There is a slight shift for （002） diffraction peak of Co-doped ZnO nanorods in XRD because Co2~ ions entered into the ZnO lattice. Energy-dispersive X-ray spectroscopy（EDS） and X-ray photoelectron spectroscopy（XPS） results also show the exist of Co in the sample. Photoluminescence（PL） spectra of the samples were observed at room tempera- ture, the UV emission of Co-doped ZnO shows a slight red shift compared with that of undoped ZnO. Thus, we can reach the conclusion that Zn2＋ ions have been substituted by Co2. ions in the ZnO samples. In addition, photocatalysis property of Co-doped ZnO nanorods was investigated under the irradiation of visible light. It was found that the degradation rate of methyl orange is increased greatly nanorods. by Co-doped ZnO nanorods in comparison to undoped ZnO     

Non-Basic Solution Routes to Prepare ZnO Nanoparticles

Nanocrystalline ZnO particles were prepared from alcoholic solutions of zinc acetate dihydrate without using base such as NaOH or LiOH through a colloid process carried out at a low temperature of 60°C. A comparative study of chemical reactions from zinc acetate dihydrate to ZnO was made using different types of monool solvents, i.e. methanol, ethanol, and 2-methoxyethanol. It was revealed that layered hydroxide zinc acetate was formed as an intermediate and its transformation into ZnO was a key reaction step in any of the solutions. Reaction time necessary for the precipitation of ZnO was greatly influenced by the solvents used. Methanol was useful for the preparation of the ZnO nanoparticles, which were chemically pure in terms of cation impurities and exhibited green photoluminescence by the ultraviolet excitation.     

单根锑掺杂ZnO微米线热电发电机的制备及热电性能

采用化学气相沉积(CVD)方法,在无催化剂的条件下,生长出了锑掺杂的超长、大尺寸ZnO微米线。测试表明微米线的平均长度可达1~2.5 cm,微米线中锑元素的含量约为3.1%(n/n)。此外,将挑选出的单根锑掺杂ZnO微米线以银浆为电极制作成热电发电机,并研究了微米线长度和微米线直径对器件输出性能的影响。研究表明当器件两电极之间的温差为20 K且两电极间微米线的长度为1.6 cm时,器件能够输出的最大电压和最大输出功率分别约为36 m V和10.8 n W,微米线的赛贝克系数约为-1.80 m V·K-1。此外,热电器件的输出电压随着微米线长度的增加而增大,随微米线直径的增加而减小。     

单根锑掺杂ZnO微米线热电发电机的制备及热电性能

采用化学气相沉积（CVD）方法,在无催化剂的条件下,生长出了锑掺杂的超长、大尺寸ZnO微米线。测试表明微米线的平均长度可达1~2.5 cm,微米线中锑元素的百分含量约为3.1%（n/n）。此外,将挑选出的单根锑掺杂ZnO微米线以银浆为电极制作成热电发电机,并研究了微米线长度和微米线直径对器件输出性能的影响。研究表明当器件两电极之间的温差为20 K且两电极间微米线的长度为1.6 cm时,器件能够输出的最大电压和最大输出功率分别约为36 mV和10.8 nW,微米线的赛贝克系数约为-1.80 mV·K^-1。此外,热电器件的输出电压随着微米线长度的增加而增大,随微米线直径的增加而减小。     

ZnO纳米纤维的静电纺丝及其光催化性能的研究

以聚乙烯醇溶液为络合剂与醋酸锌反应制得前驱体溶液,采用静电纺丝法制备PVA/Zn(Ac)2复合纳米纤维,经过高温煅烧得到直径为100 nm的ZnO纳米纤维,采用差热-热重分析、红外光谱分析、X射线粉末衍射分析及扫描电镜等手段对其进行了表征.光催化降解酸性品红溶液的实验结果表明,太阳光照65 min使质量浓度为45 mg/L酸性品红水溶液的脱色率达93%;另外,重复使用ZnO纳米纤维4次之后,其光催化降解率仍能达到70%以上.这充分说明ZnO纳米纤维具有良好的光催化性能.     

ZnO/SAPO-34组装体的制备及发光性质研究

以微孔分子筛SAPO-34为主体，采用锌盐浸渍-灼烧的方法，在SAPO-34的菱沸石笼中制备出ZnO纳米粒子，并对不同温度下灼烧后得到的ZnO/SAPO-34组装体的发光性质进行了研究。由于SAPO-34菱沸石笼的尺寸所限，制备出来的ZnO粒子粒径小于1 nm。量子尺寸效应使得SAPO-34笼中的ZnO纳米粒子的荧光光谱在近紫外区的发射谱峰有明显的蓝移。