含不同侧氨基密度的PLGA-(ASP-Diol)x-PLGA共聚物的合成与表征

以N-(苄氧羰基)-L-天冬氨酸和亚硫酰氯反应制备了N-苄氧基天冬氨酸酐,将其与不同链长的二醇(乙二醇、二缩三乙二醇、聚乙二醇200和600)缩聚,合成了含端羟基的天冬氨酸-二醇交替预聚物(ASP-Di-ol)x;以其为大分子引发剂,辛酸亚锡为催化剂进行丙交酯/乙交酯(摩尔比75∶25)开环共聚,合成系列含侧氨基的天冬氨酸-二醇-聚乙丙交酯[PLGA-(ASP-Diol)x-PLGA]多元三嵌段共聚物.用FTIR,1HNMR,EA,DSC和GPC对共聚物结构进行表征.结果表明,影响预聚物分子量的主要因素不是二醇的分子量,而是其端羟基的活性.随着二醇链段长度增加,多元共聚物中氨基含量降低,玻璃化转变温度也明显下降.通过改变二醇链段的长度(或分子量)可有效地控制PLGA-(ASP-Diol)x-PLGA中侧氨基的密度及分布.     

FeBr3/Me6TREN催化MMA反向原子转移自由基聚合研究

对FeBr3/Me6TREN催化的反向原子转移自由基聚合进行了研究.在不同的催化剂、引发剂的配比、聚合温度和配体用量等条件下,该催化体系催化的MMA聚合反应动力学为一级反应,聚合物分子量可控,分子量分布很窄,说明该体系催化的聚合反应为活性可控聚合.通过实验计算了反应的活化能,并利用UV光谱对催化剂进行了研究.     

Synthesis, characterization and protein adsorption behaviors of PLGA/PEG di-block co-polymer blend films

A series of poly(D,L-lactic-co-glycolic acid) (PLGA)/poly(ethyleneglycol) (PEG) di-block copolymers were synthesized by ring-opening polymerization of D,L-lactide and glycolide with different molecular weights of monomethoxy polyethyleneglycol (mPEG) 750, 2000 and 5000 as an initiator. The bulk properties of these co-polymers were characterized by using 1H NMR spectroscopy, gel permeation chromatography, differential scanning calorimetry (DSC). Electron spectroscopy for chemical analysis (ESCA) results, in which the blend films with the di-block copolymers showed increasing surface oxygen atomic percentage with increasing PEG chain length, indicate that PEG chain segment in the di-block copolymers is surface oriented and enriched onto the surface of the blend films. The extent of protein adsorption onto the surface of these blend films was studied, using iodine radio-labeled human serum albumin, gamma globulin and human growth hormone. The protein adsorption amount was reduced for the blend films prepared with PLGA/PEG 750 and 2000 di-block copolymers, but increased to a great extent for PLGA/PEG 5000 di-block copolymer. This is due to the increased water uptake capacity of the blend film, which absorbed more protein molecules into a swollen polymer matrix in addition to surface adsorption.     

Synthesis and characterization of block poly(ester‐ether‐urethane)s from bacterial poly(3‐hydroxybutyrate) oligomers

Telechelic hydroxylated poly(3‐hydroxybutyrate) (PHB‐diol) oligomers have been successfully synthesized in 90–95% yield from high molar mass PHB by tin‐catalyzed alcoholysis with different diols (mainly 1,4‐butanediol) in diglyme. The PHB‐diol oligomers structure was studied by nuclear magnetic resonance, Fourier transformed infrared spectroscopy MALDI‐ToF MS, and size exclusion chromatography, whereas their crystalline structures, thermal properties and thermal stability were analyzed by wide angle X‐ray scattering, DSC, and thermogravimetric analyses. The kinetic of the alcoholysis was studied and the influence of (i) the catalyst amount, (ii) the diol amount, (iii) the reaction temperature, and (iv) the diol chain length on the molar mass was discussed. The influence of the PHB‐diol molar mass on the thermal stability, the thermal properties and optical properties was investigated. Then, tin‐catalyzed poly(ester‐ether‐urethane)s (PEEU) of M_n = 15,000–20,000 g/mol were synthesized in 1,2‐dichloroethane from PHB‐diol oligomers (P_ester) with modified 4,4'‐MDI and different polyether‐diols (P_ether) (PEG‐2000, PEG‐4000, and PPG‐PEG‐PPG). The influence of the PHB‐diol chain length, the P_ether/P_ester ratio, the polyether segment nature and the PEG chain length on the thermal properties and crystalline structures of PEEUs was particularly discussed. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1949–1961     

Thermoresponsive self-assembly of short elastin-like polypentapeptides and their poly(ethylene glycol) derivatives

Short polypeptides with four pentad repeats, (VPGVG)(4) and (VPAVG)(4), were synthesised by manual fluorenylmethoxycarbonyl/tert-butyl (Fmoc/t-Bu) solid phase peptide synthesis using a convergent approach. In the next step, the peptides were coupled via their N-terminus with activated semi-telechelic poly(ethylene glycol) O-(N-Fmoc-2-aminoethyl)-O'-(2-carboxyethyl)undeca(ethylene glycol) (Fmoc-PEG-COOH) to yield monodisperse Fmoc-PEG-peptide diblock copolymer. Both the presence of the terminal hydrophobic Fmoc group and the hydrophilic PEG chain in the copolymers were shown to play a crucial role in their self-associative behaviour, leading to reversible formation of supramolecular thermoresponsive assemblies. The peptides and their PEG derivatives were characterised by HPLC, NMR and MALDI-TOF MS. The associative behaviour of the peptides and their PEG derivatives was studied by dynamic light scattering, MAS NMR and phase contrast microscopy. [image: see text]     

PEG-PLA block copolymer as potential drug carrier: preparation and characterization

Diblock and multiblock copolymers composed of a poly(D,L-lactide) (PLA) or poly(trimethylene carbonate) (PTMC) core with a hydrophilic chain of poly(ethylene glycol) (PEG) were prepared. These copolymers, in which the core is connected to PEG through a polyfunctional molecule such as citric, mucic, or tartaric acid, may be used to form nanoparticles for drug delivery applications. Branched copolymers were prepared by direct amidation between the polyfunctional acid and methoxy PEGamine, followed by ring-opening polymerization of lactide or trimethyl carbonate to form the PLA and PTMC block copolymers. In addition, a complex multiblock copolymer of biotin-PEG-poly[lactic-co-(glycolic acid)] (PLGA) for application in an avidin-biotin system was prepared for possible design of nanospheres with targeting properties. Studies of drug release from polymeric systems containing multiblock copolymers and studies of polymer degradation were also performed.     

PEG链段对聚乙二醇接枝聚苯胺结构与性能的影响

将苯胺(An)与甲氧基聚乙二醇邻氨基苯基醚氧化共聚,制备了梳状接枝共聚物PAn-g-PEG.研究了梳状接枝共聚物的UV-Vis、微观结构、热稳定性和溶解成膜性等随侧链聚乙二醇(PEG)链段的变化规律.结果表明随PAn-g-PEG中PEG链段长度和含量的提高,共聚物的溶解性和成膜性能显著提高,电子导电率缓慢降低,热稳定性变差.共聚物具有微相分离结构,其形态随PEG链段的改变分别为“海-岛相”和“双连续相”;提高PEG链段长度和含量,PAn-g-PEG能形成稳定的水溶性分散体系,并能浇注成柔韧平整的导电高分子自支撑膜.     

Y‐shaped poly(ethylene glycol) and poly(trimethylene carbonate) amphiphilic copolymer: Synthesis and for drug delivery

New Y‐shaped (AB₂‐type) amphiphilic copolymers of poly(ethylene glycol) (PEG) with poly(trimethylene carbonate) (PTMC), PEG‐b‐(PTMC)₂, were successfully synthesized by the ring‐opening polymerization (ROP) of TMC with bishydroxy‐modified monomethoxy‐PEG (mPEG). First, a bishydroxy functional ROP initiator was synthesized by esterification of acryloyl bromide with mPEG, followed by Michael addition using excess diethanolamine. A series of Y‐shaped amphiphilic PEG‐(PTMC)₂ block copolymers were obtained via ROP of TMC using this PEG with bishydroxyl end groups as macroinitiator and ZnEt₂ as catalyst. The amphiphilic block copolymers with different compositions were characterized by gel permeation chromatography (GPC) and ¹H NMR, and their molecular weight was measured by GPC. The results showed that the molecular weight of Y‐shaped copolymers increased with the increase of the molar ratio of TMC to mPEG‐(OH)₂ initiator in feed while the PEG chain length was kept constant. The Y‐shaped copolymer mPEG‐(PTMC)₂ could self‐assemble into micelles in aqueous medium and the critical micelle concentration values of the micelles decrease with increase in hydrophobic PTMC block length of mPEG‐(PTMC)₂. The in vitro cytotoxicity and controlled drug release properties of the Y‐shaped amphiphilic block copolymers were also investigated. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8131–8140, 2008     

侧链含氨基的PLGA-(PEGA-SP)_n共聚物的合成与表征

以聚乙二醇(PEG)和N -苄氧羰基 -L- 天冬氨酸酐为原料,通过溶液缩聚法制备了聚(聚乙二醇 -co -L -天冬氨酸)交替预聚物(PEG- ASP) n;进一步以辛酸亚锡为催化剂、(PEG- ASP) n 为共引发剂引发D ,L- LA和GA开环共聚合成了带有侧氨基功能基团的PLGA (PEG- ASP) n 共聚物.用GPC、FT -IR、1 H -NMR、DSC等研究了共聚物的结构和性能.结果表明,共聚物表现为典型的无定形聚合物;(PEG- ASP) n 的含量对共聚物的性能有显著影响,随(PEG- ASP) n 含量增加,共聚物的亲水性增强,玻璃化转变温度(Tg)下降;以Pd(5wt% ) C为催化剂,采用催化加氢方法可完全脱除共聚物侧氨基上的保护基团;脱除侧氨基上的保护基团后,共聚物的分子量和Tg 值均略有增大,亲水性有所提高.     

Platelet and bacterial repellence on sulfonated poly(ethylene glycol)-acrylate copolymer surfaces

Novel poly(ethylene glycol) (PEG) and sulfonated PEG (PEG-SO₃) acrylate copolymers have been prepared and characterized to apply as coating and blending materials for biomedical applications. The modified surfaces using acrylate copolymers demonstrated increased hydrophilicity, possibly due to the hypothesized reorientation of PEG/PEG-SO₃ chains into water phase. All copolymer surfaces demonstrated less platelet adhesion than control. In addition, platelet adhesion on copolymer surfaces decreased as the chain length of PEG and sulfonated PEG in copolymers increases. All copolymer surfaces reduced bacterial adhesion significantly and the adhesion level differs depending on surfaces as well as media. The obtained results attest to the usefulness of these copolymers as a coating or additive material to improve the blood compatibility of blood contacting devices.     

Investigation of the synthesis of poly-D,L-lactide-co-poly(ethylene glycol) flexible thermoplastic

A series of biodegradable poly(D,L-lactide)-poly(ethylene glycol) multiblock poly(ether-ester-urethane)s with various lactide-to-poly(ethylene glycol) (LA/PEG) mole ratios has been successfully synthesized by ring-opening polymerization (ROP) followed by chain extension reaction through formation of urethane linkage. Resulting FT-IR spectra indicate complete polymerization of lactide monomers, while NMR analysis quantitatively marks the chain length of polymer blocks. The molecular weight and dispersion index of copolymers were investigated by GPC analysis. DSC thermogram and XRD diffractogram of the prepared copolymers were studied as well for revealing the thermal and crystallinity behavior of the copolymer as LA/PEG mole ratios varied.     

磷酸钙骨水泥/聚肽共聚物生物复合材料力学性能及微观结构

磷酸钙骨水(Calcium Phosphate Cement,CPC)是一种新型的人工骨材料,可用于人体骨缺损的修复,具有良好的生物相容性、骨传导性和骨替代性．然而,磷酸钙骨水泥的抗压强度较低,脆性较大,限制了其应用,因而提高抗压强度和减小其脆性成为CPC研究领域的一个重要课题．目前,普遍采用添加纤维的方法来提高CPC材料的抗压强度和韧性．然而大多数的纤维是非降解性的．     

Effect of PLGA block molecular weight on gelling temperature of PLGA‐PEG‐PLGA thermoresponsive copolymers

Thermoresponsive, biodegradable polymeric hydrogel networks are used widely in medicinal applications. Poly(d ,l ‐lactic acid‐co‐glycolic acid)‐b‐poly(ethylene glycol)‐b‐poly(d ,l ‐lactic acid‐co‐glycolic acid) (PLGA‐PEG‐PLGA) triblock copolymers exhibit a sol–gel transition upon heating. The effect of PLGA block and PEG chain molecular weights (MWs) on the gelling temperature of polymer aqueous solution (20% w/w) is described. All polymer solutions convert into a hard gel within 2 °C of the gelling temperature. The release properties of the gels were displayed using paracetamol as a representative drug. A linear relation is described between the gelling temperature and PLGA block MW. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 35–39     

聚对二氧环己酮/聚乙二醇多嵌段共聚物的合成与表征

首先合成双端羟基的聚对二氧环己酮预聚物(PPDO)和双端羧基的聚乙二醇预聚物(PEG),然后以丁二酸酐/二环己基碳二亚胺(DCC)将PPDO与PEG偶联共聚,得到PPDO/PEG多嵌段共聚物.通过1H-NMR和GPC表征了聚合物的结构和分子量.采用差示扫描量热法(DSC)和热重分析(TGA)研究了共聚物的结晶性能和热稳定性.用透析法制备了共聚物纳米粒子,并用动态光散射(DLS)表征了共聚物纳米粒子的粒径及分散度,结果表明,随着共聚物亲水链段PEG含量的增加,其纳米粒子更易形成,粒子粒径随共聚物分子量增大而增大.     

The effects of polyelectrolytes on the inhibition and aggregation of calcium oxalate crystallization

The influence of polyelectrolytes with different architecture on spontaneous batch crystallization of calcium oxalate was investigated. A series of acidic acrylate block copolymers were been made, by radical polymerization, with defined molecular weight and structure. Radical polymerization of acrylic acid (AA) was carried out in the presence of α‐thiopolyethylene glycol monomethylether as a chain transfer agent to produce poly(ethylene glycolblockacrylic acid) copolymers. Poly(ethylene glycol) (PEG) block length in the copolymers was controlled by using three different molecular weight chain transfer agents (M_n = 350, 750 and 2000 g/mol). The presence of copolymers inhibited the crystal growth of calcium oxalate possibly through adsorption onto the active growth sites for crystal growth due to the charge and hydrophilic effects. Copyright © 2006 John Wiley & Sons, Ltd.     

聚对苯二甲酸乙二醇酯/聚乙二醇醚插层嵌段共聚物的结晶性能

合成了不同用量、不同分子量的聚乙二醇醚(PEG)或聚丁二醇醚(PTMC)与聚对苯二甲酸乙二醇酯(PET)/蒙脱土(MMT)的嵌段共聚物。研究了MMT在共聚物中的分散状态及PEG或PTMG对PET/MMT插层聚合物结晶性能的影响。结果表明,MMT在共聚物中以纳米尺寸分散;加入PEG或PTMG增强了聚酯链段的柔顺性,使共聚物熔体降温过程的结晶温度提高,冷结晶温度降低,即插层嵌段共聚物的结晶速率提高;在合成的共聚物中,分子量为2000,用量为DMT的6%的PEG对插层共聚物结晶速率的促进作用最大     

Synthesis and properties of monocleavable amphiphilic comblike copolymers with alternating PEG and PCL grafts

Symmetric reduction‐responsive amphiphilic comblike copolymers mid‐disulfide‐functionalized comblike copolymers with alternating copolymer comprised of styrenic unit and N‐(2‐hydroxyethyl) maleimide (HEMI) unit (poly(St‐alt‐HEMI)) backbones and alternating PEG and PCL side chains (S‐CP(PEG‐alt‐PCL)) with poly(St‐alt‐HEMI) backbones and alternating poly(ε‐caprolactone) (PCL) and poly(ethylene glycol) (PEG) side chains were synthesized and used as nanocarriers for in vitro release of doxorubicin. The target copolymers with predetermined molecular weight and narrow molecular weight distribution (M_w/M_n = 1.15–1.20) were synthesized by reversible addition‐fragmentation chain transfer (RAFT) copolymerization of vinylbenzyl‐terminated PEG and N‐(2‐hydroxyethyl) maleimide mediated by a disulfide‐functionalized RAFT agent S‐CPDB, and followed by ring‐opening polymerization of ε‐caprolactone. When compared with linear block copolymer comprised of poly(ethylene glycol) (PEG) and poly(?‐caprolactone) (PCL) segments (PEG‐b‐PCL) copolymers, comblike copolymers with similar PCL contents usually exhibited decreased crystallization temperature, melting temperature, and degree of crystallinity, indicating the significant influence of copolymer architecture on physicochemical properties. Dynamic light scattering measurements revealed that comblike copolymers were liable to self‐assemble into aggregates involving vesicles and micelles with average diameter in the range of 56–226 nm and particle size distribution ranging between 0.07 and 0.20. In contrast to linear copolymer aggregates, comblike copolymer aggregates with similar compositions were of improved storage stability and enhanced drug‐loading efficiency. In vitro drug release confirmed the disulfide‐linked comblike copolymer aggregates could rapidly release the encapsulated drug when triggered by 10 mM DL ‐dithiothreitol. These reduction‐sensitive, biocompatible, and biodegradable aggregates have a potential as controlled delivery vehicles. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of poly(ethylene glycol)/polypeptide/poly(D,L‐lactide) copolymers and their nanoparticles

Core‐shell structured nanoparticles of poly(ethylene glycol) (PEG)/polypeptide/poly(D ,L ‐lactide) (PLA) copolymers were prepared and their properties were investigated. The copolymers had a poly(L ‐serine) or poly(L ‐phenylalanine) block as a linker between a hydrophilic PEG and a hydrophobic PLA unit. They formed core‐shell structured nanoparticles, where the polypeptide block resided at the interface between a hydrophilic PEG shell and a hydrophobic PLA core. In the synthesis, poly(ethylene glycol)‐b‐poly(L ‐serine) (PEG‐PSER) was prepared by ring opening polymerization of N‐carboxyanhydride of O‐(tert‐butyl)‐L ‐serine and subsequent removal of tert‐butyl groups. Poly(ethylene glycol)‐b‐poly(L ‐phenylalanine) (PEG‐PPA) was obtained by ring opening polymerization of N‐carboxyanhydride of L ‐phenylalanine. Methoxy‐poly(ethylene glycol)‐amine with a MW of 5000 was used as an initiator for both polymerizations. The polymerization of D ,L ‐lactide by initiation with PEG‐PSER and PEG‐PPA produced a comb‐like copolymer, poly(ethylene glycol)‐b‐[poly(L ‐serine)‐g‐poly(D ,L ‐lactide)] (PEG‐PSER‐PLA) and a linear copolymer, poly(ethylene glycol)‐b‐poly(L ‐phenylalanine)‐b‐poly(D ,L ‐lactide) (PEG‐PPA‐PLA), respectively. The nanoparticles obtained from PEG‐PPA‐PLA showed a negative zeta potential value of ?16.6 mV, while those of PEG‐PSER‐PLA exhibited a positive value of about 19.3 mV. In pH 7.0 phosphate buffer solution at 36 °C, the nanoparticles of PEG/polypeptide/PLA copolymers showed much better stability than those of a linear PEG‐PLA copolymer having a comparable molecular weight. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Metal-free synthesis of amphiphilic functional polycarbonates

Amphiphilic block copolymers of poly(5-benzyloxy trimethylene carbonate)(PBTMC) and poly(ethylene glycol)(PEG) were synthesized through enzymatic polymerization using immobilized porcine pancreas lipase(IPPL).The obtained copolymers with different compositions were characterized by GPC and ~1H NMR.The copolymer composition was in agreement with the feed ratio. The molecular weight of the copolymers showed an increasing trend with the decrease of PEG contents.Micelles of the copolymers were formed by dialysis procedure,and characterized by transmission electron microscopy (TEM).     

Thermosensitive behavior of poly(ethylene glycol)/poly(2‐(N,N‐dimethylamino)ethyl methacrylate) double hydrophilic block copolymers

The poly(ethylene glycol)/poly(2‐(N,N‐dimethylamino)ethyl methacrylate) (PEG/PDMAEMA) double hydrophilic block copolymers were synthesized by atom transfer radical polymerization using mPEG‐Br or Br‐PEG‐Br as macroinitiators. The narrow molecular weight distribution of PEG/PDMAEMA block copolymers was identified by gel permeation chromatography results. The thermosensitivity of PEG/PDMAEMA block copolymers in aqueous solution was revealed to depend significantly on pH, ionic strength, chain structure, and concentration of the block copolymers. By optimizing these factors, the cloud point temperature of PEG/PDMAEMA block copolymers can be limited within body temperature range (30–37 °C), which suggests that PEG/PDMAEMA block copolymers could be a good candidate for drug delivery systems. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 503–508, 2010