偏锡酸锌纳米微粒的水热法制备及其对甲基橙降解的光催化性能

以醋酸锌和氯化锡为原料,以聚甲基丙烯酸钠(PMA)为表面活性剂,利用水热法合成了偏锡酸锌(ZnSnO3)纳米微粒;采用X射线衍射仪、傅立叶变换红外光谱仪、扫描电镜等分析了ZnSnO3纳米微粒的晶相、表面组成、形貌;并测定了ZnSnO3纳米微粒对甲基橙溶液的光催化降解性能.结果表明,所得ZnSnO3纳米微粒粒径约为20nm,表面存在羧基;其对pH=2的甲基橙溶液的光催化降解效果较好,甲基橙的初始浓度越低,降解效果越明显;随着催化剂用量的增加,降解效率逐渐增大.此外,循环催化试验结果表明ZnSnO3纳米微粒具有较好的催化稳定性.     

Structural and thermal properties of polysulfone-ZnO nanocomposites

Polymer nanocomposite thin film of polysulfone with different concentration of ZnO was prepared by solution grown technique. This paper presents a study on the structural and thermal properties of ZnO filled Polysulfone (PSF) nanocomposites. The structural morphology of the resulting nanocomposites was investigated by X-ray diffraction (XRD), Scanning electron microcopy (SEM), and Atomic force microscopy (AFM). Thermal properties of PSF nanocomposites samples were investigated by Differential thermal analysis, Thermal gravimetric, and Differential thermal gravimetric. Structural result shows that the ZnO nanofiller with different mass% in polymer matrix cause the significant variation of lattice spacing, crystallite size, and percentage crystallinity. XRD result shows that the amorphous behavior of PSF (Pristine) is increasing with incorporation of ZnO nanoparticle in PSF matrix. The SEM and AFM images show the change in structural morphology of PSF due to incorporation of ZnO nanoparticles. The thermal analysis result shows that the significant thermal degradation of polysulfone nanocomposites due to catalytic behavior of ZnO nanoparticles.     

Morphologies and surface plasmon resonance properties of monodisperse bumpy gold nanoparticles

The influence of the morphology of gold nanoparticles on the surface plasmon resonance was investigated experimentally and theoretically. Highly monodisperse bumpy gold nanoparticles of increasing size were synthesized, and the surface plasmon resonance wavelength shifted to longer wavelengths more rapidly with increasing particle size for bumpy particles than for spherical gold nanoparticles. The detailed surface morphology of bumpy gold nanoparticles was characterized by AFM, TEM, and SEM, and the optical properties were investigated on a single particle level. The comparison of the plasmon resonant properties between bumpy and spherical gold nanoparticles was also examined with a theoretical model.     

Preparation and thermosensitivity of naturally occurring polypeptide poly(gamma-glutamic acid) derivatives modified by propyl groups

Poly(gamma-glutamic acid) (gamma-PGA) is a biosynthetic polymer, and the carboxyl groups are able to undergo a chemical modification. In this study, poly(alpha-propyl gamma-glutamate) (gamma-PGA propylate) was synthesized by the esterification of these carboxyl groups to yield a thermosensitive and biodegradable polymer. In aqueous solution, the gamma-PGA propylate can impart thermosensitivity by controlling the hydrophobic-hydrophilic balance of the gamma-PGA polymeric chains.     

Lipid nanoparticles as vitamin matrix carriers in liquid food systems: On the role of high-pressure homogenisation, droplet size and adsorbed materials

Twelve oil-in-water nano-emulsions were prepared using a melt high-pressure homogenisation process (HPH) at 300, 800 or 1200 bar. The resulting emulsions containing 20 wt% palm oil in the absence or presence of α-tocopherol were stabilised by whey proteins alone or in mixture with lecithin. Lipid nanoparticles in these emulsions were characterized for their particle size, surface charge and protein surface concentration (PSC) in relation to their stability against aggregation and coalescence, and to their ability for encapsulation and protection of α-tocopherol against chemical degradation. Increasing HPH values were accompanied by the formation of lipid nanoparticles with decreasing size and PSC, but increasing long-term stability against aggregation and coalescence in parallel with an increase in α-tocopherol degradation (up to 15 wt% for 1200 bar). Presence of α-tocopherol, led to increasing (or decreasing) PSC values with increasing (or decreasing) HPH values for lipid nanoparticles stabilised by proteins alone (or in mixture with lecithins). In addition to these structural properties, the ability for α-tocopherol long-term stability of nanoparticles in emulsions was shown to differ more depending on their adsorbed materials (protein alone, or in mixture with lecithin) than on their particle size values. After 2 months storage, α-tocopherol in emulsions prepared at 300, 800 or 1200 bar was protected against chemical degradation at 79, 77, 67 wt%, respectively, when whey proteins were used alone, instead of 66, 63, 48 wt% when proteins were used in mixture with lecithins. These results indicated the dominant role of adsorbed proteins on the protection of vitamin models by nanoemulsions. They are of a great technological importance for production of lipid nanoparticles presenting a high volume-to-diameter ratio values and consequently high exchange surfaces between the matrix carrier and water and oxygen environmental factors.     

Morphological and thermal behavior of porous biopolymeric nanoparticles

The aim of the present work is to design, develop and characterize biodegradable polymeric nanoparticles having well defined size and porous morphology. Poly(dl-lactide-co-glycolide) (PLGA) and poly(l-lactide) (PLLA) nanoparticles (NPs) were prepared by double emulsion method with subsequent solvent evaporation. NPs were characterized by electron microscopes, dynamic light scattering, XRD and thermal properties by differential scanning calorimetry and thermogravimetry. Finally, the in vitro degradation analysis was also performed. Biodegradable NPs display a spherical surface structure with a homogeneous size distribution, and an average diameter of 180 nm for PLLA and 218 nm for the PLGA. The NP nanoporous structure was analyzed by an innovative thermal method: thermoporosimetry, providing information about nanopore dimensions. In vitro degradation studies demonstrate the gradual surface aggregation and degradation of NPs and the effects on polymer properties. Biopolymeric porous nano-systems may offer promise properties for revolutionary improvements in tissue engineering, diagnosis and targeted drug delivery systems.     

Sustainable green synthesis of silver nanoparticles using Sambucus ebulus phenolic extract (AgNPs@SEE): Optimization and assessment of photocatalytic degradation of methyl orange and their in vitro antibacterial and anticancer activity

The biogenic approach in the synthesis of nanoparticles provides an efficient alternative to the chemical synthesis system. Furthermore, the ecofriendly synthesis of metallic nanoparticles is developing rapidly due to its wide applications in sciences. In this research, metallic silver nanoparticles (AgNPs) were biosynthesized using Sambucus ebulus (S. ebulus; AgNPs@SEE) extract for the evaluation of efficient antibacterial, anticancer, and photocatalyst activities. The reaction parameters including temperatures, contact time, and AgNO₃ concentration were discussed and optimized. The optimized nanoparticles (AgNPs@SEE) showed cubic structure, spherical morphology with the average size of 35–50 nm. The photocatalytic performance of AgNPs was assessed by degradation of methyl orange at different concentrations of AgNPs@SEE (10 and 15 µl) under sun-light irradiation. About 95.89% of the pollutant was degraded (after 11 min), when 10 μl of nanocatalyst used. Also, the degradation of contaminant increased (about 95.47% after 7 min) by increasing the nanoparticle concentration to 20 μl. All in all, the results showed that the percentage of pollutant degradation increased with increasing the concentration of nanocatalyst. Furthermore, anticancer activity of AgNPs@SEE on human cancer cell lines (AGS and MCF-7), and antibacterial activity on both Gram-positive and Gram-negative microorganisms were studied. The synthesized AgNPs@SEE exhibited superior performance on cancer cell lines and effective antibacterial properties against Gram-positive microorganisms (like MIC value of 1.5 µg/ml for S. aureus) than Gram-negative microorganisms. All these investigations revealed that silver nanoparticles synthesized by natural extract have the potential to use as low-cost and efficient nanoparticles for environmental and biomedical applications.     

Manipulating the degradation rate of PVA nanoparticles by a novel chemical‐free method

The high water solubility of poly (vinyl alcohol) (PVA) is one of the challenging problems in its application. In order to rectify this problem, PVA needs to be crosslinked. Freeze‐thawing in solid state as a novel physical crosslinking method was employed for enhancement the stability of PVA nanoparticles in aqueous solutions during this study. PVA nanoparticles were successfully prepared by electrospraying and electrospray conditions were optimized in the view points of polymer concentration and solvent system. The morphology of nanoparticles was tailored from collapsed particles and mixture of particles/fibers to spherical particle by manipulating of polymer solution concentration and solvent system. After preparation of PVA nanoparticles in optimum condition, they were frozen at ?20°C and subsequently thawed at 25°C for different cycles of 1, 2, and 3. Field‐emission scanning electron microscope (FE‐SEM), Fourier‐transform infrared (FTIR), X‐ray diffraction (XRD), differential scanning calorimeter (DSC), and biodegradation were used to evaluate the effect of freeze‐thawing on properties of PVA nanoparticles. FE‐SEM showed the spherical morphology of the PVA nanoparticles with sizes ranging from 200 to 300 nm. The FTIR spectroscopy indicated that the crystallinity of PVA nanoparticles increases after freeze‐thawing process. Moreover, by increasing the number of cycles, degree of crystallinity of nanoparticles increases. The XRD and DSC analysis of PVA nanoparticles again demonstrated the increasing of crystallinity of nanoparticles after freeze‐thawing process. The biodegradation behavior of PVA nanoparticles after freeze‐thawing exhibited the decreasing of degradation rate by increasing the number of cycles. Our overall results present a solvent‐less and safe method for crosslinking of PVA nanoparticles in solid state, which make it suitable for biomedical applications.     

Simple reductant concentration-dependent shape control of polyhedral gold nanoparticles and their plasmonic properties

We report a facile seed-mediated method for the synthesis of monodisperse polyhedral gold nanoparticles, with systematic shape evolution from octahedral to trisoctahedral structures. The control over the particle growth process was achieved simply by changing the concentration of the reductant in the growth solution, in the presence of small spherical seed nanoparticles. By progressively increasing the concentration of the reductant used in the growth solution (ascorbic acid), while keeping the amount and type of added surfactant constant, the morphology of the gold nanoparticles was varied from octahedral to truncated octahedral, cuboctahedral, truncated cubic, cubic, and finally trisoctahedral structures. These nanoparticles were monodisperse in size, possessed similar volumes, and were naturally oriented so that their larger crystal planes were face down on quartz substrates when deposited from the solution. By adjusting the volume of gold seed nanoparticle solution added to a growth solution, the size of the simplest gold nanoparticles (with a highly symmetric cubic morphology) could be tuned from 50 ± 2.1 to 112 ± 11 nm. When other seed nanoparticles were used, the size of the cubic Au nanoparticles reached 169 ± 7.0 nm. The nanoparticle growth mechanism and the plasmonic properties of the resulting polyhedral nanoparticles are discussed in this paper.     

Efficient production of poly-gamma-glutamic acid by Bacillus subtilis ZJU-7

A strain with high poly-gamma-glutamic acid (gamma-PGA) production was isolated from fermented bean curd, a traditional Chinese food. The strain was named Bacillus subtilis ZJU-7 according to 16s rDNA sequencing and its taxonomic characters. The culture conditions for gamma-PGA production were evaluated. The most suitable carbon and nitrogen sources were sucrose and tryptone, respectively. Exogenous L-glutamic acid was necessary for gamma-PGA production, and the production of gamma-PGA increased on the addition of L-glutamic acid to the medium. In the medium containing 60 g/L of sucrose, 60 g/L of tryptone, 80 g/L of L-glutamic acid, and 10 g/L of NaCl, the yield of gamma-PGA reached 54.4 g/L after cultivation at 37 degrees C for 24 h, which was the highest gamma-PGA production compared with values reported in the literature. The average molecular mass of gamma-PGA produced was about 1.24 x 106 Daltons. B. subtilis ZJU-7 is genetically stable and can synthesize levan instead of gamma-PGA without the addition of L-glutamic acid to the medium.     

The photocatalytic,in vitro anthelmintic activity of biomolecule-inspired CDS nanoparticles

A simple biomolecule-inspired chemical procedure was adopted for the successful synthesis of cadmium sulphide nanoparticles (CdS-G and CdS-M) using glucose and maltose as capping agents. These nanoparticles were characterized by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Energy dispersive X-ray (EDAX) and Ultraviolet-Visible (UV–Vis) spectroscopy in order to evaluate their particle size, morphology, and optical properties. The photocatalytic degradation of methylene blue (MB) by CdS-G and CdS-M nanoparticles under visible light was estimated and the kinetics of photocatalytic degradation were compared by the evaluation of operational parameters viz., an amount of the photocatalyst, the pH of the solution, and concentration of the dye. The mechanism of generation of hydroxyl radicals on the surface of the CdS-G/M nanoparticles upon visible-light irradiation was confirmed by the terephthalic acid photoluminescence technique. The study of the effect of tert-butyl alcohol (TBA) and of a disodium salt of ethlyenediamine tetraacetic acid (EDTA-2Na) as scavengers, as well as photoluminescence measurements, revealed that HO^• and hole (h⁺) were the reactive species responsible for the degradation of MB. The anthelmintic activity of CdS-G/M nanoparticles was also evaluated.     

SYNTHESIS AND pH-SENSITIVE SELF-ASSEMBLY OF DENDRITIC POLY(AMIDOAMINE)-b-POLY(L-GLUTAMATE)BIOHYBRIDS

 Dendritic poly(amidoamine)-b-poly(L-glutamate) (PAMAM-b-PLG) biohybrids were synthesized by the ring-opening polymerization of γ-benzyl-L-glutamate N-carboxyanhydride monomer, followed by the deprotection of benzyl groups on poly(benzyl-L-glutamate), and were characterized by ¹H-NMR, FT-IR and gel permeation chromatography. The self-assembly behavior of the PAMAM-b-PLG biohybrid was investigated by means of UV-Vis, dynamic light scattering (DLS), transmission electronic microscopy (TEM) and ¹H-NMR. UV-Vis analysis demonstrated that the critical aggregation concentration of PAMAM-b-PLG was dependent on the pH value of aqueous solutios. DLS results further evidenced that the PAMAM-b-PLG biohybrid exhibited a pH-sensitive self-assembly behavior, and the average size of the self-assembled nanoparticles decreased gradually with the increasing pH value of the PAMAM-b-PLG solution. The self-assembled nanoparticles gave a nearly spherical morphology, and the pH-induced self-assembly had no obvious effect on the morphology of nanoparticles.     

Natural and edible biopolymer poly-gamma-glutamic acid: synthesis, production, and applications

Poly-gamma-glutamic acid (gamma-PGA) is a very promising biodegradable polymer that is produced by Bacillus subtilis. Gamma-PGA is water-soluble, anionic, biodegradable, and edible. This paper reviews the production of a strain of gamma-PGA and recent developments with respect to applications in terms of Ca absorption, moisturizing properties, gamma-PGA conjugation, super absorbent polymer, and so on. Our recent research shows that gamma-PGA can be used as an immune-stimulating and anti-tumor agent, especially at high molecular weight.     

吸附相反应技术制备Ag纳米粒子的反应机理

利用吸附相反应技术在SiO2表面制备Ag粒子, 研究了温度变化对载体表面NaOH的吸附、生成Ag的反应过程以及产物Ag粒子形貌的影响. NaOH的吸附率测定结果表明, 吸附平衡时间随着温度升高而增加. 温度升高加快了NaOH与Si—O—Si的反应, 使得NaOH的平衡吸附率不随吸附层的破坏而减少. 采用实时在线UV-Vis光谱研究了Ag粒子的生成过程, 发现温度超过40 ℃时, 反应体系中Ag出现的时间、Ag粒子的浓度和粒径分布范围都发生较大变化. 样品的TEM和XRD分析也表明, 当体系温度超过40 ℃时SiO2表面Ag粒子出现了团聚, 其晶粒粒径也出现了突变. 温度升高导致表面吸附层破坏, 使得Ag的生成场所从吸附层转移到SiO2表面, 最终导致Ag的反应机理和粒子形貌的变化.     

Green Biosynthesis of Silver Nanoparticles Using ‘Polygonum Hydropiper’ and Study its Catalytic Degradation of Methylene Blue

The green synthesis of silver nanoparticles with the small size and high stability paved the way to improve and protect the environment by decreasing the use of toxic chemicals and eliminating biological risks in biomedical applications. Plant mediated synthesis of silver nanoparticles is gaining more importance owing its simplicity, rapid rate of synthesis of nanoparticles and eco-friendliness. In this study, focus on biosynthesis of silver nanoparticles using Polygonum hydropiper extract and its catalytic degradation of hazardous dye, methylene blue has been highlighted. The rapid reduction of silver (Ag) ions was monitored using UV-Visible spectrophotometer and showed formation of silver nanoparticles within less than one hour with maximum absorption of silver nanoparticles at 430 nm. The major functional groups present in the synthesis responsible for the formation of silver nanoparticles. It was identified by using Fourier Transform Infrared spectrophotometer (FTIR). Field Electron Scanning Microscope (FESEM) was used to characterise the nanoparticles synthesized using P.hydropiper. The morphology of silver nanoparticles was predominantly spherical and aggregated into irregular structure with average diameter of 60 nm. In addition, this report emphasizes the effect of the silver nanoparticles on the degradation rate of hazardous dyes by sodium borohydride (NaBH₄). The efficiency of silver nanoparticles as a promising candidate for the catalysis of organic dyes by NaBH₄ through the electron transfer process is established in the present study.     

Preparation and characterization of metronidazole‐loaded chitosan nanoparticles for drug delivery application

This study describes the preparation of mucoadhesive chitosan nanoparticles containing metronidazole (MZ) intended for colon‐specific delivery. The chitosan nanoparticles were prepared by the ionic gelation method and their in vitro properties were studied. The release profiles of MZ from the nanoparticles were determined by UV–Vis absorption measurement at λ_max 278 nm. Scanning electron microscopy was used for morphology observation. The nanoparticles exhibited mucoadhesive properties, which diminished with increasing drug content. The nanoparticles with a particle size range between 200 and 300 nm exhibited excellent mucoadhesive properties. The results show that the formulated nanoparticles have succeeded in controlling the release of MZ over a 12‐hr period. In conclusion, the release of MZ was found to be dependent upon the composition of the nanoparticles, the ratio of the components and possible particle size, as well as bioadhesive ability. Copyright © 2008 John Wiley & Sons, Ltd.     

SiO_2担载的CuO_x纳米粒子量子尺寸效应的红外光谱研究

以硝酸铜作为前驱体,利用尿素作为沉淀剂,采用均相沉积沉淀方法合成了具有纳米尺寸CuOx的CuOx/SiO2材料,并通过改变样品的焙烧温度,得到了一系列具有不同纳米尺寸CuOx的CuOx/SiO2材料.采用TEM和原位红外光谱技术对CuOx纳米粒子的形貌、尺寸以及CO吸附性能进行了表征.结果表明,随着样品焙烧温度的升高,球形CuOx纳米粒子逐渐聚集,其尺寸从3 nm增加到11 nm,CO在CuOx上吸附的红外峰峰强逐渐减弱,并且红外频率从2135 cm-1红移到了2120 cm-1.研究结果表明,随着CuOx纳米粒子尺寸的增加,吸附中心Cuδ+离子的正电荷密度逐渐减小,导致Cuδ+离子与CO分子之间的电场相互作用变弱,使得CO分子在Cuδ+离子上吸附的红外频率发生了红移.说明在这个纳米尺寸范围内,CuOx纳米粒子具有明显的量子尺寸效应,不同尺寸的CuOx纳米粒子,其电子结构性质明显不同.     

聚肽-壳聚糖复合体系的自组装行为研究

以聚肽、壳聚糖为原料,制备复合纳米粒子,采用透射电镜、动态激光散射仪及Zeta电位分析仪、荧光光谱仪对制备成的聚肽-壳聚糖复合体系纳米粒子的形貌、粒径、Zeta电位及临界胶束浓度等自组装行为进行表征,结果表明:聚肽-壳聚糖复合体系纳米粒子是具有壳-核结构的球型粒子;纳米粒子平均粒径为240nm,粒径分布较均匀,稳定性较好;复合体系中聚肽的临界胶束浓度为4.55×10-4mg/mL.     

Green synthesis of silver nanoparticles for ammonia sensing

Silver nanoparticles synthesized by a reagent less method involving only UV radiation have been used in colorimetric assay for the detection of ammonia in solution. The silver nanoparticles were synthesized by the exposure of a silver nitrate solution to a low-power UV source in the presence of poly(methacrylic acid) (PMA), which acted both as reducing and capping agent. The synthesis of the silver nanoparticles was studied by monitoring the changes in position and amplitude of the localized plasmon resonance (LSPR) band using UV-vis spectroscopy. The morphology of the particles was studied using transmission electron microscopy which confirmed the formation of spherical particles with an average particle size around 8 nm. Interestingly, the silver nanoparticles solution was found to display a strong color shift from purple to yellow upon mixing with increasing concentration of ammonia ranging from 5 to 100 ppm. Hence, the nanoparticles prepared with this method could be used as colorimetric assay for sensing applications of ammonia in water.     

Green synthesis of hematite/TUD-1 nanocomposite as efficient photocatalyst for bromophenol blue and methyl violet degradation

Hematite immobilized on TUD-1 nanocomposite was prepared via sol-gel composite formation of biosynthesized hematite nanoparticles with TUD-1 precursor. The nanocomposite was characterized by various techniques such as X-ray diffraction, scanning electron microscopes/energy-dispersive X-ray spectroscopy, transmission electron microscope, gas sorption analysis, and UV–Visible diffuse reflectance spectrophotometer. Photocatalytic activity of the nanocomposite was examined in bromophenol blue and methyl violet degradation. The results showed that hematite nanoparticles obtained by the biosynthesis has particle size ranging at 20–100 nm. The nanocomposite of hematite/TUD-1 exhibit the homogeneous dispersion of the hematite in the mesoporous structured TUD-1. The smaller dispersed hematite nanoparticles affects to the increasing band gap energy of hematite, and is responsible for the efficient photocatalytic degradation of bromophenol blue and methyl violet. It is found that degradation efficiencies of the reactions over hematite/TUD-1 nanocomposite are 94.6% for bromophenol blue, and 96.7% for methyl violet. The degradation efficiency and kinetics constant of the degradation reaction expressed the effectiveness of the nanocomposite since the values are comparable with the hematite nanoparticles and other reported photocatalysts.