Efficient solvent-free aminolysis of epoxides under (C4H12N2)2[BiCl6]Cl·H2O catalysis

An efficient and rapid procedure for ring opening of various epoxides with aromatic, aliphatic and heterocyclic amines is developed at room temperature under solvent-free conditions in the presence of (C₄H₁₂N₂)₂[BiCl₆]Cl·H₂O (1 mol %). This catalyst can be reused several times without losing of its activity.     

Greener aminolysis of epoxides on BiCl3/SiO2

The remarkable catalytic activity of BiCl₃/SiO₂ for the ring-opening of epoxides with aromatic and aliphatic amines under microwave and thermal heating was observed. This eco-friendly heterogeneous catalyst displayed high to excellent regioselectivity in the synthesis of β-amino alcohols under solvent-free conditions. High turnover frequency (TOF) values under microwave heating and excellent reusability of the catalyst may significantly contribute to applied chemistry.     

Efficient rearrangement of epoxides catalyzed by a mixed-valent iron trifluoroacetate [Fe3O(O2CCF3)6(H2O)3]

The mixed-valent oxo-centered triiron(III, III, II) trifluoroacetate complex [Fe₂^IIIFe^IIO(O₂CCF₃)₆(H₂O)₃] was prepared by reacting anhydrous iron(III) chloride with boiling trifluoroacetic acid under nitrogen. The non-hygroscopic and readily available mixed-valent triiron trifluoroacetate complex was found to be an efficient catalyst for the regioselective rearrangement of epoxides. A number of carbonyl compounds formed via the rearrangement of epoxides could be obtained by a simple filtration of the reaction mixture through a short plug of silica gel.     

Syntheses of polycarbonate and polyurethane precursors utilizing CO2 over highly efficient, solid as-synthesized MCM-41 catalyst

As-synthesized MCM-41 was used as a reusable, heterogeneous catalyst for the eco-friendly synthesis of cyclic carbonate precursors of polycarbonates via a cycloaddition reaction of CO₂ with epoxides. This catalyst is also efficient for the synthesis of alkyl and aryl carbamate precursors of polyurethanes via the reaction of amines, CO₂ and alkyl halides. Both these reactions were carried out under mild conditions and without using any solvent or co-catalyst. CO₂ is utilized as a raw material replacement for toxic phosgene in the conventional synthesis of these chemicals.     

BiCl3 promoted aza-Prins type cyclization: a rapid and efficient synthesis of 2,4-disubstituted piperidines

Several N-protected homoallyl amines and epoxides were subjected to an aza-Prins cyclization. A rapid and efficient BiCl₃ promoted stereoselective synthesis of trans-2,4-disubstituted piperidine derivatives was achieved.     

Nano-ferrous ferric oxide (nano-Fe3O4): Powerful,reusable, and stable catalyst for N-Boc protection of amines

Nano-ferrous ferric oxide (nano-Fe₃O₄) efficiently catalyzed N-boc protection of amines in high yields and acceptable reaction times. Nano-Fe₃O₄ was applied as an efficient, green, heterogeneous and reusable magnetite catalyst. Clean reaction, simple purification, short reaction time and high yield were some other advantages of this compound.     

FeCl3/pyridine: dual-activation in opening of epoxide with carboxylic acid under solvent free condition

Inexpensive, non-toxic, and readily available catalyst system FeCl₃/pyridine was found to be highly efficient for the opening of a wide variety of epoxides with carboxylic acid under solvent free conditions.     

Regioselective ring-opening of epoxides with amines using Zn(ClO4)2-Al2O3 as a heterogeneous and recyclable catalyst

A simple and efficient method has been developed for the synthesis of β-amino alcohols by regioselective ring-opening of epoxides with amines in the presence of zinc perchlorate-neutral alumina as a heterogeneous recyclable catalyst at room temperature in high yields.     

BiCl3-mediated opening of epoxides, a facile route to chlorohydrins or amino alcohols: one reagent, two paths

Opening of epoxides can be an effective means by which a variety of functional groups can be incorporated. In this letter, we outline how variation of conditions, in particular, that of solvent and concentration, give rise to different products using the Lewis acid catalyst BiCl₃.     

Highly Regioselective 5-endo-tet Cyclization of 3,4-Epoxy Amines into 3-Hydroxypyrrolidines Catalyzed by La(OTf)3

Highly regioselective intramolecular aminolysis of 3,4-epoxy amines has been achieved. Key features of this reaction are (1) chemoselective activation of epoxides in the presence of unprotected aliphatic amines in the same molecules by a La(OTf)₃ catalyst and (2) excellent regioselectivity for anti-Baldwin 5-endo-tet cyclization. This reaction affords 3-hydroxy-2-alkylpyrrolidines stereospecifically in high yields. DFT calculations revealed that the regioselectivity might be attributed to distortion energies of epoxy amine substrates. The use of this reaction was demonstrated by the first enantioselective synthesis of an antispasmodic agent prifinium bromide.     

B2O3/Al2O3 as an Efficient and Recyclable Catalyst for the Synthesis of β-Amino Alcohols under Solvent-Free Conditions

A convenient and efficient procedure for the solvent-free synthesis of β-amino alcohols has been achieved via B₂O₃/Al₂O₃-promoted highly regioselective ring opening of epoxides with aromatic amines in good to excellent yields at room temperature. Additionally, the catalyst can be recycled without affecting the catalytic property.     

Oxidation of secondary amines to nitrones using magnetically separable tungstophosphoric acid supported on silica-encapsulated γ-Fe2O3 nanoparticles

Superparamagnetic tungstophosphoric acid supported on silica-encapsulated γ-Fe₂O₃ was used as an efficient catalyst for the direct oxidation of secondary amines to nitrones with hydrogen peroxide as the oxidant. The catalyst could be recycled up to four times without significant loss of activity.     

氧化铝载体对Pt-Sn/Al2O3催化剂上苯胺和苯甲醇一步合成N-苯基苄胺催化反应性能的影响

以基于借氢策略的苯甲醇和苯胺一步合成N-苯基苄胺为模型反应,研究了三种不同表面结构的氧化铝对其负载的Pt-Sn催化剂上N-烷基化合成仲胺反应性能的影响.采用N₂吸附-脱附法、压汞法、X射线衍射、透射电镜、扫描电镜、CO脉冲吸附、H₂-程序升温还原及NH₃-程序升温脱附等技术对载体和Pt-Sn/Al₂O₃催化剂进行了表征.结果表明,与Al₂O₃相互作用较弱且高度分散的Pt颗粒具有很高的催化活性,Al₂O₃载体较大的孔体积和大孔分布的孔结构有助于反应物扩散和吸附到催化剂表面并提高反应活性.同时也有利于反应产物从催化剂表面离开,从而提高催化剂的稳定性.然而Al₂O₃较强的酸性及酸性分布降低了产物仲胺的选择性和催化剂稳定性.     

InBr3 Catalyzed intermolecular hydroamination of unactivated alkenes

InBr₃ has been demonstrated to be a simple catalyst for the intermolecular hydroamination of unactivated alkenes to produce tosyl- and mesyl-protected amines in moderate to good yields.     

Ferric sulfate [Fe2(SO4)3·xH2O]: an efficient heterogeneous catalyst for the synthesis of tetrahydroquinoline derivatives using Povarov reaction

Fe₂(SO₄)₃·xH₂O can be used as an efficient and reusable catalyst for the synthesis of pyrano- and furanotetrahydroquinolines via one-pot three-component Povarov reaction involving aromatic aldehydes, aromatic amines, and cyclic enol ethers. The catalyst is recyclable, economically viable, and environmentally benign. This protocol provides good yields and diastereoselectivity as well as applicability on a wide range of substrates.     

Highly Efficient Aminolysis of Epoxides Catalyzed by Reusable Zirconyl Triflate,ZrO(OTf)2

Efficient ring opening of epoxides with aromatic amines catalyzed by ZrO(OTf)₂ is reported, and the corresponding β amino (beta-amino acid) alcohols were obtained in high yields in CH₃CN as solvent. The reactions were carried out at room temperature and in the presence of only 1.25 mol% of ZrO(OTf)₂. This catalyst can be reused several times without loss of its activity.     

Yb(OTf)3催化苯乙酮、芳香醛和芳香胺的Mannich反应: 三组分“一锅法”合成β-氨基酮衍生物

报道了稀土化合物Yb(OTf)₃催化的苯乙酮、芳香醛和芳香胺Mannich反应, 三组分“一锅法”合成了一系列的β-氨基酮衍生物. 该方法操作简单、条件温和、产率较高、催化剂可重复使用, 且对环境友好.     

Molybdenum oxide/bipyridine hybrid material {[MoO3(bipy)][MoO3(H2O)]}n as catalyst for the oxidation of secondary amines to nitrones

The inorganic-organic hybrid material {[MoO₃(bipy)][MoO₃(H₂O)]}_n (bipy = 2,2′-bipyridine) can be used as a water-tolerant catalyst for the oxidation of secondary amines under mild conditions using either urea hydrogen peroxide (UHP) or tert-butylhydroperoxide (TBHP) as the oxidant. Under optimized reaction conditions (2 mol % catalyst, 3-4 equiv TBHP, CH₂Cl₂ as the solvent, 40 °C), the corresponding nitrones were obtained with different efficiency depending on the nature of the cyclic or acyclic amine used.     

Ring opening of epoxides with alcohols using Fe(Cp)2BF4 as catalyst

Fe(Cp)₂BF₄ is an efficient catalyst for the alcoholysis of aromatic, aliphatic, and cyclic epoxides giving excellent yields of the corresponding β-alkoxy alcohols under ambient conditions. The methanolysis of styrene oxide using Fe(Cp)₂BF₄ as a catalyst (5 mol %) gave excellent yield of 2-methoxy-2-phenylethanol with complete regio-selectivity. The ring opening of cyclic epoxides gave 77–97% yields of trans-β-methoxy alcohols, in 0.5–6 h. The use of 1,2-epoxyhexane and 1,2-epoxydodecane as substrates gave both regioisomers in excellent yields. The first order rate of reaction with respect to catalyst was observed for the kinetics of ring opening of 1,2-epoxyhexane with methanol.     

Efficient synthesis of β-amino alcohols by regioselective ring opening of epoxides with amines catalyzed by CuFe2O4 nanoparticles

A simple and efficient method has been developed for the synthesis of β-amino alcohols by regioselective ring opening of epoxides with amines in the presence of CuFe₂O₄ nanoparticles as a heterogeneous recyclable catalyst at room temperature in high yields.