分散固相萃取/气相色谱-质谱法测定酱油及食醋中氨基甲酸乙酯

建立了分散固相萃取(d-SPE)/气相色谱-质谱法(GC-MS)检测酱油和食醋中氨基甲酸乙酯(EC)含量的分析方法。基于不同样品基质的复杂性,以乙腈(酱油)或者乙酸乙酯(食醋)进行液液萃取,经N-丙基乙二胺(PSA)分散固相萃取净化。考察了萃取溶剂的种类、萃取次数和PSA使用量等因素对EC萃取效率和分析效果的影响。在优化实验条件下,EC在10~500μg/L质量浓度范围内呈良好的线性关系,线性系数(r2)为0.999 8。EC在酱油和食醋两种基质中的定量下限均为5.0μg/kg,不同加标水平下的平均回收率为92.9%~114.3%,相对标准偏差为0.5%~5.3%。该方法简单、灵敏、准确,适用于酱油和食醋中EC含量的测定,具有很好的实际应用价值。     

分散固相萃取-分散液液微萃取/气相色谱-串联质谱法测定蔬菜中19种有机磷农药残留

采用分散固相萃取和分散液液微萃取联用方法,建立了气相色谱-串联质谱法(GC-MS/MS)同时测定蔬菜中19种有机磷农药残留量的分析方法。分散固相萃取方法以乙腈为萃取液,以N-丙基-乙二胺(PSA)和C18为吸附剂。对影响分散液液微萃取效率的因素(萃取溶剂种类及体积、分散剂体积等)进行优化,同时分析了实验过程中添加掩蔽试剂L-古洛糖酸γ-内酯(AP)对基质效应补偿作用的影响。在最佳实验条件下,19种有机磷在辣椒和大葱中3个添加水平(0.05,0.1,0.5 mg/kg)的回收率为76.9%~126.8%,相对标准偏差为0.6%~7.3%,检出限(S/N=3)为0.10~0.50μg/kg。该方法简单、高效、重现性好、富集倍数高,可用于蔬菜中有机磷农药的快速检测。     

分散固相萃取-分散液液微萃取-气相色谱质谱法测定玉米和大米中氟虫腈及其代谢物的残留

建立了分散固相萃取-分散液液微萃取与气相色谱/质谱联用测定玉米和大米中痕量氟虫腈及其代谢物残留的分析方法。使用乙腈和水混合溶液作为萃取溶剂,盐析后,提取液经N-丙基-乙二胺硅烷固相萃取材料(PSA)作为吸附剂后,采用分散液液微萃取步骤将目标物从到微量四氯乙烯中。对影响分散液液微萃取效率的因素,包括萃取溶剂种类及体积、盐等条件进行了优化。在0.02~1μg/m L浓度范围内,线性关系良好(r≥0.9987)。在玉米和大米样品中氟虫腈添加浓度为1.0~25.0μg/g时,平均回收率在70.4%~95.1%之间,相对标准偏差(n=5)在2.6%~12%之间,以最低添加浓度1μg/kg作为定量限。     

高效液相色谱-串联质谱法同时测定水体和沉积物中12种有机磷酸酯类化合物

建立了高效液相色谱-质谱联用技术结合固相萃取和液液萃取方法检测水体和沉积物中12种磷酸酯类(OPEs)化合物残留的方法.水样样品经HLB固相萃取柱富集,乙酸乙酯洗脱两次,沉积物样品以乙腈超声萃取,旋转蒸发至干,用超纯水稀释后重复水样处理步骤,采用ZORBAX Eclipse Plus C18色谱柱(150 mm×2.1 mm, 3.5 μm)进行分离,以0.2%甲酸-甲醇作为流动相进行梯度洗脱,采用正离子MRM监测模式,外标法定量分析.水样中,12种OPEs在0.05、0.10和0.50 μg/L加标水平下,除TMP (28.5%~47.8%)和TEHP (22.4%~73.8%) 外,其余目标化合物的平均回收率为66.4%~115.0%,相对标准偏差为0.5%~9.1%,方法定量限(MOQ)为0.001~0.050 μg/L;沉积物中,在5、10和50 μg/kg加标水平下,除TMP(35.7%~44.9%)、TCEP (31.2%~48.9%)外,其余目标化合物的平均回收率为65.9%~120.0%,相对标准偏差为0.01%~9.5%,方法定量限(MOQ)为0.02~2.0 μg/kg(dw).基于上述方法对太湖水样和沉积物样品中目标化合物定量检测分析,∑OPEs含量分别为0.1~1.7 μg/L和8.1~420 μg/kg dw.     

分散固相萃取-超高效液相色谱-质谱/质谱法测定干果果肉中56种农药残留

针对干果果肉基质含水量低、含糖量较高等特点,建立了改进的分散固相萃取结合超高效液相色谱-质谱/质谱法(UPLC-MS/MS)测定干果果肉培育过程中可能使用的56种农药残留量。样品经水浸润,以0.1%甲酸-乙腈提取,改进的分散固相萃取法(PSA)净化,液相色谱-质谱/质谱法检测,基质匹配标准曲线外标法定量。56种农药在10~500μg/L范围内线性关系良好,相关系数均大于0.990,在5,10和50μg/kg添加水平下56种农药回收率范围为60.4%~127.9%;相对标准偏差在1.1%~20%(n=6)之间;检出限和定量限分别为0.1~1.0μg/kg和0.3~3.1μg/kg。方法适合于干果果肉中56种农残检测。     

分散固相萃取-分散液液微萃取结合气相色谱-三重四极杆质谱法测定茶叶中7种拟除虫菊酯类农药残留

将分散固相萃取和分散液液微萃取(d-SPE-DLLME)相结合,并与气相色谱-三重四极杆质谱(GC-MS/MS)联用,建立了快速测定茶叶中7种拟除虫菊酯类农药残留的方法。样品经乙腈提取,N-丙基乙二胺(PSA)和多壁碳纳米管(MWCNTs)净化,四氯化碳(CCl_4)浓缩萃取后,采用GC-MS/MS进行分析。以全发酵红茶为基质,考察了提取剂种类、萃取剂的种类和体积、分散剂体积以及萃取时间对萃取效率的影响。以乙腈为提取剂进行分散固相萃取,在进行分散液液微萃取时,以200μL CCl4为萃取剂,1 m L乙腈为分散剂,萃取时间为1 min。结果表明,7种拟除虫菊酯类农药在10~500μg/kg浓度范围内线性关系良好,定量下限为1.0~10.0μg/kg。7种农药在4种茶叶(红茶、绿茶、乌龙茶和黑茶)中4个添加水平下的平均回收率为75.4%~113.6%,相对标准偏差(RSD,n=5)不大于8.8%。该方法具有简单、快速、成本低、检出限低的特点。应用所建立的方法对12种市售茶叶样品进行检测,结果满意。     

分散固相萃取-液相色谱-质谱检测蔬菜水果中氨基甲酸酯和有机磷农药

以乙二胺-N-丙基硅烷(PSA)为吸附剂,乙腈为萃取溶剂,建立新型的基质分散固相萃取农残样品前处理技术,实现样品快速制备;利用LC-MS同时定量蔬菜和水果中的氨基甲酸酯和有机磷农药,并与常用固相萃取吸附剂ODS进行对比。选取4种代表性的蔬菜和水果,采用加标回收的方法,测定回收率和精密度,检验该方法的准确性和可靠性。对于绝大多数农药,在不同基质中,回收率为80%~110%,精密度为0.3%~8.0%。以西红柿为基质,检出限可达0.5~35μg/kg。研究表明,本方法法简单、快速、经济并具有较高灵敏度。采用本方法可对当地市场上常见时令蔬菜及水果进行监测。     

分散固相萃取-超声辅助分散液液微萃取/高效液相色谱法测定土壤中溴氰菊酯残留

建立了以分散固相萃取-超声辅助分散液液微萃取为样品前处理技术,结合高效液相色谱法(HPLC)测定土壤中溴氰菊酯。样品用甲醇∶水(1∶4,V/V)提取,经布氏漏斗减压抽滤,滤液经N-丙基乙二胺(PSA)、C18、石墨炭黑粉(GCB)净化后,用氯仿萃取,超声,离心后沉积相进行HPLC测定。对分散固相萃取吸附剂的选择及影响分散液液微萃取的因素进行了优化,在最优条件下,溴氰菊酯的富集倍数达到565倍,线性范围为0.005~2.5mg/kg,线性相关系数为0.9998,检出限为0.001mg/kg,平均加标回收率为70.3%~94.5%,相对标准偏差为2.5%~4.7%。该方法具有简便快速、准确灵敏、萃取效率高等特点,可用于土壤中溴氰菊酯残留检测。     

分散固相萃取-同位素稀释-气相色谱-质谱法测定酱油中5种N-亚硝胺

应用分散固相萃取技术和同位素稀释技术,结合气相色谱-质谱仪(GC-MS),建立了同时测定酱油中5种挥发性N-亚硝胺(NAs)的分析方法。酱油样品采用乙酸乙酯提取,提取液经缓慢氮吹浓缩后,分散固相萃取净化,INNOWAX极性毛细管色谱柱分离,GC-MS选择离子扫描(SIM)模式分段检测,同位素内标法定量。方法学评价表明,5种NAs在质量浓度2.0~200μg/L范围内线性关系良好,相关系数均大于0.998;方法检出限为0.5~1.0μg/kg,定量限为1.5~3.0μg/kg;阴性酱油样品中3个添加水平的平均回收率为81.2%~115%,相对标准偏差(RSD)为3.0%~7.8%。方法应用于38个酱油样品的检测结果显示,有5个样品检出N-亚硝基哌啶(NPIP)。     

气相色谱-串联质谱法测定饮用水、酱油和食醋中四种杀鼠剂

采用气相色谱串联质谱法测定饮用水、酱油和食醋中4种鼠药氟乙酰胺、鼠立死、毒鼠强和杀鼠酮的含量。饮用水样品用固相萃取(苯乙烯二乙烯苯和甲基丙稀酸甲脂聚合物固相萃取柱)富集净化;食醋和酱油样品用乙腈为提取溶剂,加入少量石墨化炭黑去除色素的快速萃取法提取净化,采用INNOWAX弹性的石英毛细管柱分析。结果表明本方法测定选定样品基质的回收率和相对标准偏差分别在57.2%～102.2%,1.9%～9.5%之间;饮用水中除去杀鼠酮的最低检测浓度为2.0μg/L外,其他均小于0.5μg/L;食醋和酱油中杀鼠酮的最低检测浓度为0.10 mg/kg,其他均小于0.025 mg/kg。本方法适用于突发中毒事件中几种食品样品中4种鼠药的同时快速定性和准确定量。     

Darstellung,Kristallstrukturen, Schwingungsspektren und Normalkoordinatenanalyse von vier bindungsisomeren Trichlorotrirhodanoosmaten(IV)

Preparation, Crystal Structures, Vibrational Spectra, and Normal Coordinate Analysis of four Linkage Isomeric Trichlorotrirhodanoosmates(IV) By treatment of fac-[OsCl₃I₃]^2? with (SCN)₂ in dichloromethane the linkage isomers fac-[OsCl₃(NCS)₃]^2? ( 1 ), mer-[OsCl₃(NCS)₂^c(SCN)]^2? ( 2 ), mer-[OsCl₃(NCS)(SCN)₂^t]^2? ( 3 ), and mer-[OsCl₃(NCS)(SCN)₂^c]^2? ( 4 ) are formed which have been separated by ion exchange chromatography on diethylaminoethyl cellulose. X-Ray structure determinations have been performed on single crystals of fac-(Ph₄As)₂[OsCl₃(NCS)₃] (triclinic, space group P1 , a = 12.142(5), b = 13.233(5), c = 19.300(5) Å, α = 98.642(5)º, β = 100.509(5)º, γ = 112.514(5)º, Z = 2), mer-(Ph₄As)₂[OsCl₃(NCS)₂^c (SCN)] · acetone (triclinic, space group P1 , a = 11.707(5), b = 13.238(5), c = 19.048(5) Å, α = 75.960(5)º, β = 88.981(5)º, γ = 69.999(5)º, Z = 2), mer-(Ph₄As)₂[OsCl₃(NCS)(SCN)₂ ^t] (triclinic, space group P1, a = 10.6861(12), b = 11.6587(5), c = 12.5232(5) Å, α = 112.069(8)º, β = 95.052(8)º, γ = 92.559(7)º, Z = 1) and mer-(Ph₄As)₂[OsCl₃(NCS)(SCN)₂ ^c] · 2acetone (triclinic, space group P1 , a = 11.444(5), b = 14.661(5), c = 15.830(5) Å, α = 75.790(5)º, β = 80.273(5)º, γ = 75.205(5)º, Z = 2). The complex anions are completely ordered. The via N or S coordinated thiocyanate groups are located nearly direct above one of the cis-positioned Cl ligands with Os? N? C angles of 169.1º, 171.5º, 175.7º ( 1 ), 175.6º, 178.6º ( 2 ), 172º ( 3 ), and 173.1º ( 4 ) and Os? S? C angles of 106.2º ( 2 ), 106.1º, 106.6º ( 3 ), 105.1º, and 108.2º ( 4 ). Using the molecular parameters of the X-Ray determinations the low temperature (10 K) IR and Raman spectra of the (n-Bu₄N) salts of all four linkage isomers have been assigned by normal coordinate analyses based on a modified valence force field. The valence force constants are f_d(OsN) = 1.71 ( 1 ), 1.46 and 1.62 ( 2 ), 1.69 ( 3 ), and 1.61 ( 4 ), f_d(OsS) = 1.27 ( 2 ), 1.36 ( 3 ), 1.32, and 1.49 mdyn/Å ( 4 ). Taking into account increments of the trans influence a good agreement between observed and calculated frequencies is achieved.     

Darstellung,Kristallstrukturen, Schwingungsspektren und Normalkoordinatenanalyse von vier bindungsisomeren Tetrachlorodirhodanoosmaten(IV)

Preparation, Crystal Structures, Vibrational Spectra, and Normal Coordinate Analysis of Four Linkage Isomeric Tetrachlorodirhodanoosmates(IV) By treatment of cis- or trans-[OsCl₄I₂]^2? with (SCN)₂ in dichloromethane the linkage isomers cis-[OsCl₄(NCS)₂]^2? ( 1 ), trans-[OsCl₄(NCS)(SCN)]^2? ( 2 ), cis-[OsCl₄(NCS)(SCN)]^2? ( 3 ) and trans-[OsCl₄(SCN)₂]^2? ( 4 ) are formed which have been separated by ion exchange chromatography on diethylaminoethyl cellulose. The X-Ray structure determinations on single crystals of cis-(Ph₄As)₂[OsCl₄(NCS)₂] (triclinic, space group P1 , a = 10.019(5), b = 11.702(5), c = 21.922(5) Å, α = 83.602(5)°, β = 85.718(5)°, γ = 73.300(5)°, Z = 2), trans-(Ph₄As)₂[OsCl₄ · (NCS)(SCN)] (monoclinic, space group P2₁/c, a = 18.025(5), b = 11.445(5), c = 23.437(5) Å, β = 94.208(5)°, Z = 4), cis-(Ph₄As)₂[OsCl₄(NCS)(SCN)] (triclinic, space group P1 , a = 10.579(5), b = 11.682(5), c = 22.557(5) Å, α = 81.073(5)°, β = 85.807(5)°, γ = 87.677(5)°, Z = 2) and trans-(Ph₄As)₂ · [OsCl₄(SCN)₂] (triclinic, space group P1 , a = 10.615(5), b = 11.691(5), c = 11.907(5) Å, α = 111.314(5)°, β = 96.718(5)°, γ = 91.446(5)°, Z = 1) reveal the complete ordering of the complex anions. The via N or S coordinated thiocyanate groups are located nearly direct above one of the cis-positioned Cl ligands with Os? N? C angles of 171.2° and 174.3° ( 1 ), 162.3° ( 2 ), 172° ( 3 ) and Os? S? C angles of 108.3° ( 2 ), 105.7° ( 3 ) and 105.5° ( 4 ). Using the molecular parameters of the X-Ray determinations the low temperature (10 K) IR and Raman spectra of the (n-Bu₄N) salts of all four linkage isomers are assigned by normal coordinate analyses based on a modified valence force field. The valence force constants are f_d(OsN) = 1.59 ( 1 ), 1.67 ( 2 ), 1.60 ( 3 ) and f_d(OsS) = 1.27 ( 2 ), 1.31 ( 3 ) and 1.32 mdyn Å^?1 ( 4 ). Taking into account increments of the trans influence a good agreement between observed and calculated frequencies is achieved.     

Darstellung und Kristallstruktur von (n-Bu4N)3[Ir(NCS)(SCN)5]

Preparation and Crystal Structure of (n-Bu₄N)₃[Ir(NCS)(SCN)₅] The evaporated ethanolic extrakt of the reaction product of K₃[IrCl₆] and HNO₃, refluxed with an aqueous KSCN solution yields a mixture of the linkage isomers [Ir(NCS)_n(SCN)_6?-n]^3?, n = 0? 2, and small amounts of linkage isomeric chloropentarhodanoiridates(III), from which [Ir(NCS)(SCN)₅]^3? has been isolated by ion exchange chromatography on DEAE-cellulose. The X-Ray structure determination on a single crystal of (n-Bu₄N)₃[Ir(NCS)(SCN)₅] (monoclinic, space group P 2₁/a, a = 17.513(5), b = 32.607(5), c = 23.661(5) Å, β = 94.757(5)°, Z = 8) confirms the existance of a heteroleptic hexakis(thiocyanato(N)-thiocyanato(S))iridate(III) with an Ir? N distance of 2.03 Å and Ir? S bond lengths between 2.29 and 2.38 Å. The SCN groups with angles between 166 and 175° are nearly linear with Ir? S? C angles from 99.9 to 109.4°. The Ir? N? C angles of the two crystallographic independent anions are 166 and 174°.     

On-line separation and preconcentration of inorganic arsenic and selenium species in natural water samples with CTAB-modified alkyl silica microcolumn and determination by inductively coupled plasma-optical emission spectrometry

A new, simple, and selective method has been presented for the separation and preconcentration of inorganic arsenic (As(III)/As(V)) and selenium (Se(IV)/Se(VI)) species by a microcolumn on-line coupled with inductively coupled plasma-optical emission spectrometry (ICP-OES). Trace amounts of As(V) and Se(VI) species were separated and preconcentrated from total As and Se at desired pH values by a conical microcolumn packed with cetyltrimethylammonium bromide (CTAB)-modified alkyl silica sorbent in the absence of chelating reagent. The species adsorbed by CTAB-modified alkyl silica sorbent were quantitatively desorbed with 0.10 ml of 1.0 mol l⁻¹ HNO₃. Total inorganic arsenic and selenium were similarly extracted after oxidation of As(III) and Se(IV) to As(V) and Se(VI) with KMnO₄ (50.0 μmol l⁻¹). The assay of As(III) and Se(IV) were based on subtracting As(V) and Se(VI) from total As and total Se, respectively. All parameters affecting the separation/preconcentration of As(V) and Se(VI) including pH, sample flow rate and volume, eluent solution and volume have been studied. With a sample volume of 3.0 ml, the sample throughput was 24 h⁻¹ and the enrichment factors for As(V) and Se(VI) were 26.7 and 27.6, respectively. The limits of detection (LODs) were 0.15 μg l⁻¹ for As(V) and 0.10 μg l⁻¹ for Se(VI). The relative standard deviations (RSDs) for nine replicate determinations at 5.0 μg l⁻¹ level of As(V) and Se(VI) were 4.0% and 3.6%, respectively. The calibration graphs of the method for As(V) and Se(VI) were linear in the range of 0.5–1000.0 μg l⁻¹ with a correlation coefficient of 0.9936 and 0.9992, respectively. The developed method was successfully applied to the speciation analysis of inorganic arsenic and selenium in natural water samples with satisfactory results.     

Pursuing new facts in the coordination capabilities of (1-diaminomethylene)thiourea (HATU): Products of the interaction with transition metal halides – Structural investigations

This work is part of our studies on the reactivity and crystal engineering of (1-diaminomethylene)thiourea (HATU). Structure and other properties of the selected products of the interaction of HATU with transition metal halides, also in the presence of 3% hydrogen peroxide as an oxidizing agent, have been investigated ((1) di-μ-((1-diaminomethylene)thiouron-1-ium)-κ⁴S:S-bis[chlorido((1-diaminomethylene)-thiouron-1-ium-κS)copper(I)] tetrachloride [(C₂H₇N₄S)₄Cu^I₂Cl₂]Cl₄, (2) catena(bis(3,5-diamino-1,2,4-thiadiazol-2-ium)-bis(μ₂-chlorido)-chloridocuprate(II)) [(C₂H₆N₄S)₂(Cu₂Cl₆)]_∞, (3) 3,5-diamino-1,2,4-thiadiazol-2-ium pentachloridoferrate(III) (C₂H₆N₄S)₂[FeCl₅], (4) 3,5-diamino-1,2,4-thiadiazol-2-ium chloride) (C₂H₆N₄S)Cl, (5) 3,5-diamino-1,2,4-thiadiazol-2-ium tetrachloridozincate(II) (C₂H₇N₄S)₂[ZnCl₄]. For (2) also magnetic properties have been characterized. Compound (3) contains unusual pentachloridoferrate(III) anions.     

SYNTHESIS AND CHARACTERIZATION OF METAL COMPLEXES WITH AMPICILLIN

Abstract

The reaction, in water, of Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) ions with sodium ampicillinate at room temperature has allowed isolation of dimers with the following general formula [M(amp)Cl]₂ × nH₂O (n = 1.5?3.2). The complexes were characterized by elemental analyses, conductivity measurements, magnetic susceptibilities and spectroscopic methods (IR, Raman, EPR and UV-Visible). A dinuclear structure based on octahedrally coordinated metal ions is proposed.     

On the morphological behavior of ABC miktoarm stars containing poly(cis 1,4-isoprene), poly(styrene), and poly(2-vinylpyridine)

Fundamental understanding of microphase separation in ABC miktoarm copolymers is vital to access a plethora of nonconventional morphologies. Miktoarm stars based on poly(cis 1,4-isoprene) (I), poly(styrene) (S), and poly(2-vinylpyridine) (V) are model systems, which allow systematic studies of the effects of composition, chemical microstructure, and temperature on the thermodynamics of microphase separation. Eleven ISV-x (I:S:V = 1:1:x, v:v:v) miktoarm copolymers were synthesized by anionic polymerization affording well-defined copolymers with a variable V arm. Equilibrium bulk morphologies of all samples, as evidenced by small-angle X-ray scattering, transmission electron microscopy (TEM), and self-consistent field theory, showed a systematic transition from lamellae (x ≈ 0–0.2) to [8.8.4] tiling (x ≈ 0.6–0.9) to cylinders in undulating lamellae (x ≈ 2–4) and, finally, to hexagonally packed core–shell cylinders (x ≈ 5–8). Chemical microstructure of the I arm [poly(cis 1,4-isoprene)] versus poly(3,4-isoprene) is shown to play important role in affecting morphological behavior. To reconcile differences between ISV-x star morphologies reported in the literature and those reported herein, even for the same composition, effects of the microstructure of I arm on the Flory–Huggins parameter between I and V arms were taken into account in a qualitative manner. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1491–1504     

Synthesis and Characterization of Some Unique Heterocyclic Derivatives Containing Aluminium(III) Atoms in 4- and 6-Co-Ordination States∶ Reaction of Bis(β-Diketonato) Aluminium (III)-DI-μ-Isopropoxo-DI-Isopropoxo Aluminium(III) with Triphenylsilanol and Diphenylsilanediol

Reactions of bis ( g -diketonato) aluminium(III)-di- w -isopropoxo-di-isopropoxo-aluminium (III), [CH₃COCHCOR)2Al( w -OPrⁱ)₂Al(OPrⁱ) ₂], with triphenylsilanol, Ph₃SiOH, in 1:1 and 1:2 molar ratios and with diphenylsilanediol, Ph₂Si(OH)₂, in a 1:1 molar ratio, have resulted in the synthesis of [(CH₃COCHCOR)₂Al( w -OPrⁱ)₂Al(OSiPh₃)(OPrⁱ)], [(CH₃COCHCOR)₂Al( w -OPrⁱ)₂Al(OSiPh₃)₂] and [(CH₃COCHCOR)₂Al( w -OPrⁱ)₂Al(OSiPh₂O], respectively. These are soluble in a variety of organic solvents ( e.g. , benzene, chloroform and dimethylsulfoxide) and show dinuclear behaviour in chloroform. These derivatives have been characterized by elemental analyses, molecular weight measurements, IR and NMR (¹H, ¹³C and ²⁷Al) studies.     

Structural Studies on Dimethyltin(IV) Carboxylates

In order to correlate ¹¹⁹Sn Mössbauer parameters and structural data for dimethyltin(IV) derivatives, the molecular structures of bis(acetato)dimethyltin(IV) and bis(trifluoroacetato)dimethyltin(IV) were determined by single crystal X-ray diffration. Crystals of Me₂Sn(OOCCH₃)₂ are monoclinic, a = 26.282(4), b = 5.282(1), c = 14.434(3) Å, β = 101.17(2)°, Z = 8, space group C2/c, and those of [Me₂Sn(OOCCF₃)₂]_n are monoclinic, a = 8.444(1), b = 17.689(1), c = 15.368(1) Å, β = 93.013(9)°, Z = 8, space group Cc. The structures were solved by the Patterson method and were refined by full-matrix least-squares procedures to R = 0.025 and 0.027 (R_w = 0.023 and 0.030) for 2 298 and 4 182 reflections with I ≥ 3σ(F²), respectively.     

Spectrophotometric study of Cd(II), Pb(II), Hg(II) and Zn(II) complexes with 5,10,15,20-tetrakis(4-carboxylphenyl)porphyrin

The reaction of 5,10,15,20-tetrakis(4-carboxylphenyl)porphyrin (TCPP) with Cd(II), Pb(II), Hg(II) and Zn(II) was studied spectrophotometrically and kinetics, equilibrium constants as well as photodecomposition of complexes were determined. It was verified that these metal ions with large radius accelerate the incorporation reaction of zinc into TCPP. On the basis of the mechanism and kinetics of this reaction, a sensitive method for the spectrophotometric determination of trace amounts of Zn(II) has been developed. The molar absorptivity of examined Zn-TCPP complex and Sandell's sensitivity at 423 nm were 3.5×10⁵ M⁻¹ cm⁻¹ and 18.3 ng cm⁻². The detection limit for the recommended procedure was 1.4×10⁻⁹ M (0.9 ng ml⁻¹) and precision in range 20-100 ng ml⁻¹ not exceeds 2.7% RSD. The proposed method applied for zinc determination in natural waters and nutritional supplement was compared with AAS results and declared value.