Development of a solvent-free method for the simultaneous identification/quantification of drugs of abuse and their metabolites in environmental water by LC-MS/MS

This work details a rapid analytical method using direct sample injection for the simultaneous identification/quantification of 22 drugs of abuse, including some of their major metabolites, in environmental samples. This has been developed using a hybrid triple quadrupole-linear ion trap-mass spectrometer (QqLIT). With the increasing sensitivity of today's tandem mass spectrometers, direct injection analysis of water samples has become an attractive alternative to traditional analytical protocols, which often include a preliminary pre-concentration step. What's more, this kind of analysis is in accordance with many of the main objectives of so-called green analytical chemistry, or environmentally friendly practice. The analytical performance of the LC-MS/MS method was evaluated in three different water matrices (surface water, influent and effluent wastewater). Data acquisition was carried out in selected reaction monitoring (SRM) mode under time-scheduled conditions, monitoring two SRM transitions for simultaneous identification/quantification of all target compounds in the samples. Additionally, an experiment was performed using the information-dependent acquisition (IDA) scan to carry out the identification of those analytes for which the second transition was present at a low intensity. Finally, the two methodologies developed were applied to real samples for evaluation.     

Development of a screening method for the determination of PCBs in water using QuEChERS extraction and gas chromatography-triple quadrupole mass spectrometry

A new method has been developed and validated for the simultaneous analysis of 11 polychlorinated biphenyls (PCBs), in water samples at trace levels by gas chromatography coupled to triple quadrupole mass spectrometry (GC-QqQ-MS/MS). Water samples were extracted by the QuEChERS (Quick Easy Cheap Effective Rugged and Safe) method. The QqQ analyzer acquired data in multiple reactions monitoring (MRM), permitting both quantification and confirmation in a single injection with a running time reduced up to 11.0 min. The effect of matrix interferences in extracts on analyte quantification and the identification of PCBs in water samples was deeply studied. The results showed that PCBs were prone to strong matrix interactions in water samples, and the quantification and identification of PCBs were highly affected by a matrix enhancement effect. To evaluate the performance of the method, validation experiments were carried out on water samples at three spiking levels (1.6, 8.0, 40.0 μg L(-1)). Recovery was in the range of 95 - 109% at 1.6 μg L(-1), 90 - 95% at 8.0 μg L(-1) and 97 - 102% at 40.0 μg L(-1), respectively. Precision values expressed as relative standard deviation (RSD) were lower than 15%. Linearity in the range of 0.5 - 50.0 μg L(-1) provided determination coefficients (R(2)) higher than 0.999 for all compounds. The limits of detection (LODs) for PCBs were ≤0.1 μg L(-1) and the limits of quantification (LOQs) ranged from 0.04 to 0.3 μg L(-1). The applicability of the proposed method to detect and quantify PCBs has been demonstrated in analyse of 15 real samples.     

Simultaneous determination of triazines and their main transformation products in surface and urban wastewater by ultra-high-pressure liquid chromatography–tandem mass spectrometry

This work describes the optimization, validation and application of an ultra-high-pressure liquid chromatography–tandem mass spectrometry (UHPLC-MS/MS) method for the quantification and confirmation of 11 compounds (atrazine, simazine, terbuthylazine, terbumeton, terbutryn and their main transformation products) in surface and wastewater samples. Several of these analytes are included in the list of priority substances in the framework on European Water Policy. The application of this method to water samples reveals that the most relevant transformation products (TPs) should be incorporated into current analytical methods to obtain a more realistic knowledge of water quality regarding pesticide contamination. TPs are generally more polar and mobile than parents and can be transported to the aquatic environment more easily than their precursors. This can explain their concentrations found in water, which in many cases are much higher than intact triazines. To efficiently combine UHPLC with MS/MS, a fast-acquisition triple quadrupole mass analyser was used. Working in selected reaction monitoring mode, up to three simultaneous transitions per compound were acquired, allowing a reliable quantification and confirmation at nanogram per litre levels. The method developed includes a pre-concentration step based on solid-phase extraction (OASIS HLB cartridges). Satisfactory recoveries (70–120%) and relative standard deviations (<20%) were obtained for all compounds in different water sample types spiked at two concentrations (0.025 and 0.1 μg/L in surface water; 0.25 and 1.0 μg/L in effluent wastewater; 0.5 and 2.0 μg/L in influent wastewater). The optimized method was found to have excellent sensitivity with instrumental detection limits as low as 0.03 pg. In addition, the influence of the matrix constituents on the ionization efficiency and the extraction recovery was studied in different types of Italian and Spanish surface and urban wastewater. Signal suppressions were observed for all compounds, especially for influent wastewater. The use of isotope-labelled internal standards was found to be the best approach to assure an accurate quantification in all matrix samples.     

Investigating the presence of pesticide transformation products in water by using liquid chromatography-mass spectrometry with different mass analyzers

Many pesticide transformation products (TPs) can reach environmental waters as a consequence of their normally having a higher polarity than their parent pesticides. This makes the development of analytical methodology for reliable identification and subsequent quantification at the sub-microgram per liter levels necessary, as required under current legislation. In this paper we report the photodegradation of several pesticides frequently detected in environmental waters from the Spanish Mediterranean region using the high-resolution and exact-mass capabilities of hybrid quadrupole time-of-flight mass spectrometry (QTOF MS) hyphenated to liquid chromatography (LC). Once the main photodegradation/hydrolysis products formed in aqueous media were identified, analytical methodology for their simultaneous quantification and reliable identification in real water samples was developed using on-line solid-phase extraction (SPE)-LC-tandem MS with a triple-quadrupole (QqQ) analyzer. The methodology was validated in both ground and surface water samples spiked at the limit of quantification (LOQ) and 10 x LOQ levels, i.e. 50 and 500 ng/l, obtaining satisfactory recoveries and precision for all compounds. Subsequent analysis of ground and surface water samples resulted in the detection of a number of TPs higher than parent pesticides. Additionally, several soil-interstitial water samples collected from the unsaturated zone were analyzed to explore the degradation/transformation of some pesticides in the field using experimental plots equipped with lisimeters. Several TPs were found in these samples, with most of them having also been detected in ground and surface water from the same area. This paper illustrates the extraordinary potential of LC-MS(/MS) with QTOF and QqQ analyzers for qualitative/structural and quantitative analysis, respectively, offering analytical chemists one of the most powerful tools available at present to investigate the presence of pesticide TPs in water.     

High-performance capillary electrophoretic method for the quantification of 5-methyl 2'-deoxycytidine in genomic DNA: application to plant,animal and human cancer tissues

A new approach to the evaluation of the relative degree of genomic DNA methylation through the quantification of 2'-deoxynucleosides is proposed. Detection and quantification of 5-methyl 2'-deoxycytidine in genomic DNA has been performed using micellar high-performance capillary electrophoresis (HPCE) with UV-Vis detection. This approach has been demonstrated to be more sensitive and specific than other HPCE methods for the quantification of DNA methylation degree and also to be faster than other HPLC-based methods. The detection and quantification of nucleosides through enzymatic hydrolyses notably increases the specificity of the technique and allows its exploitation in the analysis of poorly purified and/or concentrated DNA samples such as those obtained from meristematic plant regions and paraffin-embedded tissues.     

Advances in miniaturization and increasing sensitivity in analysis of organic contaminants in marine biota samples

In recent years there has been much progress in the miniaturization of sample treatment approaches for the analysis of organic contaminants. Whilst much focus has been given to analysis of liquid matrices (e.g., water, biological fluids), equivalent approaches for lipid rich biota samples have seen significantly less progress. This is especially the case for samples of very small organisms commonly employed as standard test species in ecotoxicity studies. Typically, the extractable biotic sample size available for body residue analysis is very small and the total pollutant accumulation can vary significantly between species types according to factors such as organism size, lipid content and exposure conditions. Depending on the physical and chemical characteristics of the analyte(s) in question, extraction and purification, especially from more complex matrices, appears to be one of the main bottlenecks in achieving their quantification. The current article presents a review of the available micro-extraction methods for small marine biota samples, focusing on environmentally important organic pollutants such as polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and pesticides.     

Micro-total analysis system for virus detection: microfluidic pre-concentration coupled to liposome-based detection

An integrated microfluidic biosensor is presented that combines sample pre-concentration and liposome-based signal amplification for the detection of enteric viruses present in environmental water samples. This microfluidic approach overcomes the challenges of long assay times of cell culture-based methods and the need to extensively process water samples to eliminate inhibitors for PCR-based methods. Here, viruses are detected using an immunoassay sandwich approach with the reporting antibodies tagged to liposomes. Described is the development of the integrated device for the detection of environmentally relevant viruses using feline calicivirus (FCV) as a model organism for human norovirus. In situ fabricated nanoporous membranes in glass microchannels were used in conjunction with electric fields to achieve pre-concentration of virus–liposome complexes and therefore enhance the antibody–virus binding efficiency. The concentrated complexes were eluted to a detection region downstream where captured liposomes were lysed to release fluorescent dye molecules that were then quantified using image processing. This system was compared to an optimized electrochemical liposome-based microfluidic biosensor without pre-concentration. The limit of detection of FCV of the integrated device was at 1.6 × 10⁵ PFU/mL, an order of magnitude lower than that obtained using the microfluidic biosensor without pre-concentration. This significant improvement is a key step toward the goal of using this integrated device as an early screening system for viruses in environmental water samples.     

Simultaneous extraction and determination of pharmaceuticals and personal care products (PPCPs) in river water and sewage by solid-phase extraction and liquid chromatography-tandem mass spectrometry

This study features the simultaneous extraction and quantification of 18 pharmaceuticals and personal care products (PPCPs). This is a pioneering method for the quantification of acetaminophen, sulfamethoxazole, diclofenac, atenolol, metoprolol, diethyltoluamide and oxybenzone in atmospheric pressure chemical ionisation mode. The method was validated for high repeatability and reproducibility with relative standard deviations less than 10%. Instrument quantification limits for PPCPs were within the range of 0.05–1.0 µg L^?1, and the method quantification limits (MQLs) for ultrapure water were within the range of 0.3–15 ng L^?1. All samples were extracted using Oasis© hydrophilic–lipophilic balanced cartridges with optimised sample size and extraction conditions. Good accuracy was demonstrated, with solid-phase extraction recoveries above 80% for most PPCPs. In environmental matrices, the MQLs for river water, sewage treatment plant (STP) effluent and STP influent were 4–25, 10–153 and 38–386.5, respectively. The method was successfully applied to investigate occurrences of persistent PPCPs in Malaysian river and sewage samples.     

Peptide quantification by matrix-assisted laser desorption ionisation time-of-flight mass spectrometry: investigations of the cyclotide kalata B1 in biological fluids

A rapid method has been developed for the quantification of the prototypic cyclotide kalata B1 in water and plasma utilizing matrix-assisted laser desorption ionisation time-of-flight (MALDI-TOF) mass spectrometry. The unusual structure of the cyclotides means that they do not ionise as readily as linear peptides and as a result of their low ionisation efficiency, traditional LC/MS analyses were not able to reach the levels of detection required for the quantification of cyclotides in plasma for pharmacokinetic studies. MALDI-TOF-MS analysis showed linearity (R2 > 0.99) in the concentration range 0.05-10 microg/mL with a limit of detection of 0.05 microg/mL (9 fmol) in plasma. This paper highlights the applicability of MALDI-TOF mass spectrometry for the rapid and sensitive quantification of peptides in biological samples without the need for extensive extraction procedures.     

Determination of sub‐ppb epichlorohydrin levels in water by on‐line solid‐phase extraction liquid chromatography/tandem mass spectrometry

A new sensitive and selective method based on on‐line solid‐phase extraction (SPE) coupled to liquid chromatography/electrospray ionization tandem mass spectrometry (LC/ESI‐MS/MS) using a triple quadrupole mass spectrometer has been developed for the determination of epichlorohydrin (ECH) in different types of water samples. ECH is not easily determined directly by ESI‐MS as it is not readily ionized, and it has a low molecular mass and high polarity. Thus, prior derivatization of ECH was necessary, employing 3,5‐difluorobenzylamine as a derivatizing agent with Fe(III) as a catalyst. In order to achieve accurate quantification, correcting for matrix effects, losses in the derivatization process and instrumental deviations, isotope labelled ECH (ECH‐d₅) was added as an internal standard (IS) to the water samples. The method was validated based on European SANCO guidelines using drinking and other types of treated water spiked at two concentration levels (0.1 and 1.0 µg/L), the lower level having been established as the limit of quantification (LOQ) of the method. Satisfactory accuracy (recoveries between 70 and 103%), precision (RSD <20%) and linearity (from 0.05 to 50 µg/L, r >0.99) were obtained. The limit of detection (LOD) was set up at 0.03 µg/L. The method was applied to different water samples (drinking water and water samples collected from a municipal treatment water plant). In order to enhance confidence, five selected reaction monitoring (SRM) transitions were acquired, thus obtaining a simultaneous reliable quantification and identification of ECH in water, even at sub‐ppb levels. Copyright © 2009 John Wiley & Sons, Ltd.     

A critical review of vacuum-assisted headspace solid-phase microextraction for environmental analysis

Vacuum-assisted headspace solid-phase microextraction (Vac-HSSPME) is an emerging analytical technique, which further advances HSSPME by providing lower detection limits of analytes with poor volatility at shorter extraction times. This review discusses the theoretical aspects and possibilities of the Vac-HSSPME technique for analysis of environmental samples. Optimization of key parameters, currently available equipment and methods for quantification of organic pollutants in water and soil are considered. Key problems and limitations of the technique are discussed along with possible approaches for its future development. The technique has a well-developed theory, which could be used for modeling of the extraction process, faster method development, and optimization. Wider application of the technique is limited by the lack of automation, which, however, seems possible to develop and implement by manufacturers of commercial multi-purpose autosamplers for gas chromatography instruments. It has been shown that Vac-HSSPME allows decreasing cross-contamination of samples from the laboratory air, which is advantageous for identification and quantification of trace environmental pollutants. Simple equipment for the technique makes it possible to apply for on-site sample preparation and analysis of environmental samples.     

Trace determination of cannabinoids and opiates in wastewater and surface waters by ultra-performance liquid chromatography-tandem mass spectrometry

A fast and reliable method using solid-phase extraction and ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) has been developed for the simultaneous detection, identification and quantification of several central nervous system depressor drugs of abuse such as cannabinoids (Delta9-tetrahydrocannabinol, THC) and opiates (morphine, codeine, heroin, methadone, fentanyl) and their metabolites in water samples. Compounds were extracted from water by using Oasis HLB cartridges. After SPE enrichment, the selected depressor drugs, under UPLC optimized conditions, were separated in less than 8 min. Electrospray (ESI) tandem MS in positive ion mode and selected reaction monitoring was used for quantification. ESI-MS/MS conditions such as capillary and cone voltages, source and desolvation temperatures and cone and desolvation gas flow rates have been optimized and MS and MS/MS spectra of the studied compounds were obtained. At the working conditions four identification points were obtained as required by European Union guidelines for analysis by LC-MS/MS. Quality parameters (intra-day and inter-day precisions) for each analyte have been established in three different matrixes (purified, surface and waste waters). Recoveries were generally higher than 70% and instrumental quantification limits and limits of quantification were in the low pg and ng/l range, respectively. Finally, the method has been applied to the analysis of influent and effluents wastewaters and natural water samples from Catalonia (NE Spain) where the presence of several opiates such as morphine, codeine, norcodeine 2-ethylene-1,5-dimethyl-3,3-diphenylpyrrolidine and methadone and cannnabinoids such as THC and 11-nor-carboxy-Delta9-tetrahydrocannabinol has been demonstrated.     

Three dimensional water and ice quantification using neutron imaging

Neutron radiography (NR) and computed tomography (NCT) are important non-destructive testing tools which determine information about an object’s interior structure and material properties. Although water quantification using 2-D neutron imaging has been applied to fuel cells for over a decade, the development of an accurate 3-D method has only recently been demonstrated. The 3-D water quantification technique developed at the Pennsylvania State University’s Radiation Science and Engineering Center has been applied to the quantification of both liquid and ice phase water. Quantification results of water and ice inside a known small channel test object were accurate to within 2%. This capability allows the quantification of ice within a fuel cell flow field under cold-start conditions.     

Quantitative monitoring of yeast fermentation using Raman spectroscopy

Compared to traditional IR methods, Raman spectroscopy has the advantage of only minimal interference from water when measuring aqueous samples, which makes this method potentially useful for in situ monitoring of important industrial bioprocesses. This study demonstrates real-time monitoring of a Saccharomyces cerevisiae fermentation process using a Raman spectroscopy instrument equipped with a robust sapphire ball probe. A method was developed to correct the Raman signal for the attenuation caused by light scattering cell particulate, hence enabling quantification of reaction components and possibly measurement of yeast cell concentrations. Extinction of Raman intensities to more than 50 % during fermentation was normalized with approximated extinction expressions using Raman signal of water around 1,627 cm^?1 as internal standard to correct for the effect of scattering. Complicated standard multi-variant chemometric techniques, such as PLS, were avoided in the quantification model, as an attempt to keep the monitoring method as simple as possible and still get satisfactory estimations. Instead, estimations were made with a two-step approach, where initial scattering correction of attenuated signals was followed by linear regression. In situ quantification measurements of the fermentation resulted in root mean square errors of prediction (RMSEP) of 2.357, 1.611, and 0.633 g/L for glucose, ethanol, and yeast concentrations, respectively.     

Preconcentration and Successful Selective Detection of Traces of Diclofenac in Water using a Nanostructured Modified Carbon Paste Electrode

A highly sensitive, simple and low cost sensor for the quantification of the diclofenac has been constructed. This sensor consists of a carbon paste nano-structured by Multi-Walled Carbon Nanotubes (G-MWCNT)-CPE. Scanning electron microscopy (SEM) and voltammetry technique were used to characterize the electrode material and to determine the analytical performances of the sensor in comparison with those obtained at a G-CPE. The electrochemical oxidation of diclofenac on both G-CPE and (G-MWCNT)-CPE electrodes is mainly controlled by adsorption, presenting a maximum peak current intensity in H₂SO₄ 0.5 mol L⁻¹. The carbon nanotubes, as well as they provide higher conductivity of the paste, act as spacers between the flake graphite particles and avoid their stacking in order to make the surface of graphite particles more accessible to DCF adsorption. The voltammetric measurements of diclofenac on (G-MWCNT)-CPE provide a large quantification range from 0.02 to 1 μmol L⁻¹, a detection limit of 0.004 μmol L⁻¹ and quantification limit of 0.014 μmol L⁻¹ under the optimized operating conditions (H₂SO₄, 0.25 M+KCl 0.25 M, scan rate of 30 mV s⁻¹, preconcentration time 18 min. and MWNTC% (30 %)). The (G-MWCNT)-CPE sensor was successfully applied to natural water samples, just acidified with sulfuric acid (pH<1). These samples were doped with diclofenac in sub-micromolar range and the developed method was validated with excellent recoveries (within a maximum of 3 % difference from 100 %) for all samples indicating no interference effects of the water matrix.     

Application of ultra-high-pressure liquid chromatography–tandem mass spectrometry to the determination of multi-class pesticides in environmental and wastewater samples: Study of matrix effects

An ultra-high-pressure liquid chromatography–tandem mass spectrometry (UHPLC–MS/MS) method for the determination of 37 pesticides (herbicides, insecticides and fungicides) in environmental and wastewater has been developed. To efficiently combine UHPLC with MS/MS, a fast-acquisition triple quadrupole mass analyzer was used. This analyzer (minimum dwell time, 5 ms) allows acquiring up to three simultaneous transitions in the selected reaction monitoring mode for each compound assuring a reliable identification without resolution or sensitivity losses. A pre-concentration step based on solid-phase extraction using Waters Oasis HLB cartridges (0.2 g) was applied with a 100-fold pre-concentration factor along the whole analytical procedure. The method was validated based on European SANCO guidelines using surface, ground, drinking and treated water (from an urban solid residues treatment plant) spiked at two concentration levels (0.025 and 0.1 μg/L), the lowest having been established as the limit of quantification objective. The method showed excellent sensitivity, with instrumental limits of detection ranging from 0.1 to 7 pg. It was applied to environmental water samples (ground and surface water) as well as to samples of urban solid waste leachates (raw leachate and treated leachate after applying reversed osmosis) collected from a municipal treatment plant. Matrix effects have been studied in the different types of water samples analyzed, and several isotope-labelled internal standards have been evaluated as a way to compensate the signal suppression observed for most of the compounds studied, especially in wastewater samples. As a general remark, only those pesticides which response was corrected using their own isotope-labelled molecule, could be satisfactorily corrected in all type of samples, assuring in this way the accurate quantification in all matrix samples.     

Oligonucleotide microarray chip for the quantification of MS2, ΦX174, and adenoviruses on the multiplex analysis platform MCR 3

Pathogenic viruses are emerging contaminants in water which should be analyzed for water safety to preserve public health. A strategy was developed to quantify RNA and DNA viruses in parallel on chemiluminescence flow-through oligonucleotide microarrays. In order to show the proof of principle, bacteriophage MS2, ΦX174, and the human pathogenic adenovirus type 2 (hAdV2) were analyzed in spiked tap water samples on the analysis platform MCR 3. The chemiluminescence microarray imaging unit was equipped with a Peltier heater for a controlled heating of the flow cell. The efficiency and selectivity of DNA hybridization could be increased resulting in higher signal intensities and lower cross-reactivities of polymerase chain reaction (PCR) products from other viruses. The total analysis time for DNA/RNA extraction, cDNA synthesis for RNA viruses, polymerase chain reaction, single-strand separation, and oligonucleotide microarray analysis was performed in 4–4.5 h. The parallel quantification was possible in a concentration range of 9.6?×?10⁵–1.4?×?10¹⁰ genomic units (GU)/mL for bacteriophage MS2, 1.4?×?10⁵–3.7?×?10⁸ GU/mL for bacteriophage ΦX174, and 6.5?×?10³–1.2?×?10⁵ for hAdV2, respectively, by using a measuring temperature of 40 °C. Detection limits could be calculated to 6.6?×?10⁵ GU/mL for MS2, 5.3?×?10³ GU/mL for ΦX174, and 1.5?×?10² GU/mL for hAdV2, respectively. Real samples of surface water and treated wastewater were tested. Generally, found concentrations of hAdV2, bacteriophage MS2, and ΦX174 were at the detection limit. Nevertheless, bacteriophages could be identified with similar results by means of quantitative PCR and oligonucleotide microarray analysis on the MCR 3.     

Development and characterisation of an immunoaffinity chromatographic column for the on-line determination of the pesticide triclopyr

An immunoaffinity column for the selective extraction and concentration of the herbicide triclopyr from water samples and quantification on line by HPLC has been developed. The immunoaffinity device was prepared by immobilising triclopyr antibodies to hydrazide derivatized azlactona beds. Efficient desorption of bound triclopyr was achieved with 70% ethanol/water solution. The column was evaluated regarding selectivity, recovery, capacity, saturation volume and reusability. Obtained results show that immunoaffinity chromatography (IAC) can be used for quantitative extraction, concentration and determination of triclopyr from water samples.     

Determination of eight nitrosamines in water at the ng L(-1) levels by liquid chromatography coupled to atmospheric pressure chemical ionization tandem mass spectrometry

In this work, we have developed a sensitive method for detection and quantification of eight N-nitrosamines, N-nitrosodimethylamine (NDMA), N-nitrosomorpholine (NMor), N-nitrosomethylethylamine (NMEA), N-nitrosopirrolidine (NPyr), N-nitrosodiethylamine (NDEA), N-nitrosopiperidine (NPip), N-nitroso-n-dipropylamine (NDPA) and N-nitrosodi-n-butylamine (NDBA) in drinking water. The method is based on liquid chromatography coupled to tandem mass spectrometry, using atmospheric pressure chemical ionization (APCI) in positive mode with a triple quadrupole analyzer (QqQ). The simultaneous acquisition of two MS/MS transitions in selected reaction monitoring mode (SRM) for each compound, together with the evaluation of their relative intensity, allowed the simultaneous quantification and reliable identification in water at ppt levels. Empirical formula of the product ions selected was confirmed by UHPLC-(Q)TOF MS accurate mass measurements from reference standards. Prior to LC-MS/MS QqQ analysis, a preconcentration step by off-line SPE using coconut charcoal EPA 521 cartridges (by passing 500 mL of water sample) was necessary to improve the sensitivity and to meet regulation requirements. For accurate quantification, two isotope labelled nitrosamines (NDMA-d(6) and NDPA-d(14)) were added as surrogate internal standards to the samples. The optimized method was validated at two concentration levels (10 and 100 ng L(-1)) in drinking water samples, obtaining satisfactory recoveries (between 90 and 120%) and precision (RSD<20%). Limits of detection were found to be in the range of 1-8 ng L(-1). The described methodology has been applied to different types of water samples: chlorinated from drinking water and wastewater treatment plants (DWTP and WWTP, respectively), wastewaters subjected to ozonation and tap waters.