高效液相色谱-串联质谱法测定动物源食品中喹乙醇与卡巴氧残留量

建立了动物源食品猪肉、鸡肉和鱼肉中喹喔啉类兽药喹乙醇(OLQ)、卡巴氧(CBX)的高效液相色谱-串联质谱测定方法。样品经0.1 mol/L磷酸二氢钠(pH 6.0)溶液提取,Oasis HLB固相萃取柱净化,流动相定容后,采用Waters Xterra MS C18柱(5μm,150 mm×2.1 mm)分离,以乙腈-0.2%甲酸为流动相进行梯度洗脱,以串联质谱在多反应监测(MRM)正离子模式下检测,基质外标法定量。结果表明,喹乙醇和卡巴氧在质量浓度为1~20 ng/mL范围内线性关系良好,相关系数为0.998 1~0.999 9;各基质在0.2、0.4、2.0μg/kg 3个加标水平下,喹乙醇和卡巴氧的回收率为70%~93%,相对标准偏差为1.9%~16.7%,定量下限(S/N≥10)均为0.2μg/kg。应用建立的方法对猪肉、鸡肉、鱼肉样品各20个进行检测,并与国标方法进行比较,结果满意。该方法简单、灵敏、稳定,可满足猪肉、鸡肉和鱼肉中喹乙醇、卡巴氧残留的检测与确证需要。     

凝胶渗透色谱-固相萃取联合净化气相色谱-质谱联用法测定动物性食品中30种有机氯农药的残留量

建立了猪肉、鸡肉、鱼肉和虾肉等动物性食品中30种有机氯农药残留的气相色谱-质谱联用检测方法。样品匀浆后,采用乙腈提取,以凝胶渗透色谱和弗罗里硅土固相萃取柱联合进行净化,气相色谱-质谱检测,以同位素内标法定量。30种有机氯农药的响应在5.0~500.0 μg/L范围内呈良好的线性,相关系数在0.996以上,各有机氯农药的检出限在0.2~2.7 μg/kg之间。以猪肉、鸡肉、鱼肉和虾肉作为代表性基质,进行5.0、10.0、20.0 μg/kg 3个水平的加标回收试验,回收率在55.0%~119.1%之间,相对标准偏差在0.4%~15.0%之间。该方法准确可靠,灵敏度高,样品净化效果好,能够满足动物性食品中有机氯农药多残留痕量分析的要求。     

加速溶剂萃取-液相色谱-质谱/质谱法分析动物组织中的壬基酚、辛基酚和双酚A

建立了测定内分泌干扰物质烷基酚、双酚A的液相色谱-电喷雾串联质谱(负离子模式)分析方法,优化了样品前处理方法。以二氯甲烷作提取溶剂,采用加速溶剂萃取法萃取动物组织样品,萃取液用500 mg OASIS氨基固相萃取柱进行浓缩净化。对流动相组分和流动相添加剂对质谱的离子化效率进行了考察,测得3种化合物在高、中、低3个添加水平的回收率为88%~101%,相对标准偏差小于15%;双酚A、壬基酚和辛基酚的方法检出限分别为0.3, 0.05和0.1 μg/kg。对从北京市场上采集的27份动物组织样品进行检测,结果表明壬基酚广泛存在于各种动物源性食品中,检出含量为0.49~55.98 μg/kg,其中鱼肉组织中都检出壬基酚,而且其含量也较高(9.13~55.98 μg/kg)。     

高效液相色谱-串联质谱测定水产品中残留的喹乙醇代谢物

建立了高效液相色谱-质谱(LC-MS/MS)检测水产品中喹乙醇代谢物3甲-基-喹恶啉-2羧-酸(MQCA)的残留分析方法。样品先用Protease蛋白酶酶解,然后用乙酸乙酯萃取目标物,氮气吹干后用流动相溶解残渣,以甲醇、乙腈和0.1%甲酸溶液作为流动相,液相色谱串联电喷雾质谱在正离子模式下测定。MQCA在1~100μg/kg范围内线性关系良好(r0.999)。在2、4、8μg/kg3个添加水平上,回收率在82.5%~87.5%,相对标准偏差为4.5%~5.1%(n=6),定量限为1μg/kg。方法已用于水产品中喹乙醇代谢物的残留分析。     

超高效液相色谱串联质谱法测定饲料中10种脂溶性工业染料

建立了以超高效液相色谱串联四极杆质谱(UPLC-MS/MS)检测鸡和鱼类饲料中10种脂溶性染料的方法。样品经过甲醇振荡提取通过固相萃取小柱去除基质干扰。在waters BEH C_(18)柱子上,乙腈和0.2%(V:V)甲酸,10 mmol/L甲酸铵的水为流动相,利用梯度洗脱将各目标化合物分离,采用质谱多反应监测(MRM)模式进行定量检测。染料在两种饲料中检出限(LOD)为1~5μg/kg,定量限(LOQ)为2~10μg/kg,在鱼饲料中,回收率为80.3%~113.2%,相对标准偏差为1.4%~11%,在鸡饲料中回收率为79.6%~115.4%,相对标准偏差为1.6%~15%。     

超高效液相色谱-串联质谱法测定动物源性食品中的三甲氧苄氨嘧啶

建立了一种超高效液相色谱-串联质谱法(UPLC-MS/MS)测定多种基质(鸡肉、鱼肉、鸡肝、鸡蛋和牛奶)中三甲氧苄氨嘧啶的分析方法。样品用甲酸-乙腈(1:9,V/V)溶液提取,正己烷除脂净化,Acquity UPLC BEH C18柱(1.7μm,2.1 mm×50 mm)分离,以甲醇和体积分数0.1%甲酸5 mmol乙酸铵(V/V)作为流动相进行梯度洗脱,电喷雾正离子(ESI+)模式电离,多反应监测(MRM)模式检测。结果表明:三甲氧苄氨嘧啶质量浓度在1.25~15.0μg/L范围内线性关系良好(r≥0.99)。方法的定量限(信噪比为10)为5.0μg/kg,在5.0,10.0μg/kg添加浓度的回收率为61.2%~108.5%,相对标准偏差(n=6)在1.4%~9.8%之间。方法适合于多种基质中三甲氧苄氨嘧啶的测定。     

超高效液相色谱-电喷雾串联质谱法同时分析鸡肉中7种氟喹诺酮类药物残留

建立了一种同时测定鸡肉中7种氟喹诺酮类药物残留的超高效液相色谱-电喷雾串联质谱确证分析方法(UPLC-ESI-MS/MS)。样品经酸化乙腈提取、正己烷脱脂和HLB固相萃取柱净化,采用ACQUITY UPLCTM BEH C18色谱柱(50 mm×2.1 mm,1.7 μm)分离,以0.1%甲酸水溶液和乙腈作为流动相进行梯度洗脱,电喷雾质谱检测,正离子多反应监测模式进行定性和定量分析。7种药物在5～100 μg/kg范围内线性关系良好,相关系数(r2)均大于0.99;以5,25,50 μg/kg3个浓度水平进行添加回收试验,7种药物的平均回收率在79.2%～108.6%之间,相对标准偏差为4.2%～8.9%,方法的检出限(LOD)为0.2～1.4 μg/kg。方法重现性好、灵敏度高、分析时间短、确证能力强,适用于鸡肉中氟喹诺酮类药物多残留的确证检测。     

超高效液相色谱-串联质谱法测定鸡肉中头孢拉定残留

建立测定鸡肉中头孢拉定残留的超高效液相色谱-串联质谱分析方法。鸡肉样品经80%乙腈水溶液提取,PRiME HLB柱固相萃取净化,0.2%甲酸水溶液稀释,采用Waters ACQUITY UPLC HSS T3色谱柱(100 mm×2.1 mm,1.8μm)分离,以0.1%甲酸-0.1%甲酸乙腈为流动相,梯度洗脱,基质加标外标法定量。实验结果表明,头孢拉定在0.5～50.0 ng/mL浓度范围内呈良好的线性关系(R~2=0.9998),定量限为1μg/kg。向空白鸡肉中添加头孢拉定含量为1.00μg/kg、2.00μg/kg、10.0μg/kg时,回收率在77.3%～106.8%之间,相对标准偏差在3.2%～10.5%之间。本方法操作简便、快捷,实验结果准确、稳定,可满足鸡肉中头孢拉定残留量的检测。     

两步液液萃取-固相萃取净化结合高效液相色谱-串联质谱法测定猪肉中11种磺胺类兽药残留

建立了猪肉中11种常见的磺胺类兽药残留的两步液液萃取-固相萃取净化-高效液相色谱-串联质谱（LC-MS/MS）检测方法。猪肉样品经乙酸乙酯（含2%（v/v）甲酸）及丙酮分两步液液萃取，正己烷脱脂，Oasis MCX混合阳离子固相萃取小柱净化，氮吹浓缩，定容，过滤膜后进行高效液相色谱-串联质谱分析。采用多反应监测正离子模式进行检测，以基质校准曲线外标法定量。结果表明，在20~400 μg/L范围内11种磺胺类药物均呈现良好的线性关系（相关系数（r²）≥ 0.99），检出限（LODs）（S/N=3）和定量限（LOQs）（S/N=10）分别为0.1~1.0 μg/kg和0.2~3.0 μg/kg。对阴性猪肉样品，在50、100、200 μg/kg 3个水平下分别进行加标回收试验，测得各待测物的平均回收率为79.3%~105.5%之间，相对标准偏差为1.3%~11.6%（n=6）。该方法比采用一步液液萃取法具有更高的提取效率，同时结合固相萃取净化方法进一步富集目标化合物，降低了基质干扰，提高了检测灵敏度。     

液相色谱-串联质谱法测定牛奶和奶粉中卡巴氧和喹乙醇代谢物的残留量

建立了牛奶和奶粉中卡巴氧代谢物喹喔啉-2-羧酸(QCA)和喹乙醇代谢物3-甲基喹喔啉-2-羧酸(MQCA)残留量的液相色谱-串联质谱测定方法。将样品经0.6%(体积分数)的甲酸溶液进行消化,用Tris缓冲溶液调节pH后,加入Protease蛋白酶进行酶解,样品溶液用0.3 mol/L HCl溶液酸化后,采用阴离子交换固相萃取柱Oasis MAX进行净化和富集。分析样品以0.1%(体积分数)的甲酸溶液-甲醇-乙腈为流动相,经Inertsil ODS-3色谱柱分离,采用负离子扫描,在LC-MS/MS多反应监测模式下进行定性及定量分析。喹口恶啉-2-羧酸和3-甲基喹口恶啉-2-羧酸的方法测定下限牛奶为0.5μg/kg,奶粉为4.0μg/kg。对牛奶在0.5~5.0μg/kg,奶粉在4.0~40.0μg/kg添加水平的平均回收率为68.2%~82.5%,RSD为3.4%~12%。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.