The strong-field tripodal phosphine donor, [PhB(CH2PiPr2)3]-, provides access to electronically and coordinatively unsaturated transition metal complexes

This paper introduces a sterically encumbered, strong-field tris(diisopropylphosphino)borate ligand, [PhBP(iPr)(3)] ([PhBP(iPr)(3)] = [PhB(CH(2)P(i)Pr(2))(3)](-)), to probe aspects of its conformational and electronic characteristics within a host of complexes. To this end, the Tl(I) complex, [PhBP(iPr)(3)]Tl (1), was synthesized and characterized in the solid-state by X-ray diffraction analysis. This precursor proves to be an effective transmetallating agent, as evidenced by its reaction with the divalent halides FeCl(2) and CoX(2) (X = Cl, I) to produce the monomeric, 4-coordinate, high-spin derivatives [PhBP(iPr)(3)]FeCl (2) and [PhBP(iPr)(3)]CoX (X = Cl (3), I (4)) in good yield. Complexes 2-4 were each characterized by X-ray diffraction analysis and shown to be monomeric in the solid-state. For conformational and electronic comparison within a system exhibiting higher than 4-coordination, the 16-electron ruthenium complexes [[PhBP(iPr)(3)]Ru(mu-Cl)](2) (5) and [[PhBP(3)]Ru(mu-Cl)](2) (6) were prepared and characterized ([PhBP(3)] = [PhB(CH(2)PPh(2))(3)](-)). The chloride complexes 2 and 3 reacted with excess CO to afford the divalent, monocarbonyl adducts [PhBP(iPr)(3)]FeCl(CO) (7) and [PhBP(iPr)(3)]CoCl(CO) (8), respectively. Reaction of 4 with excess CO resulted in the monovalent, dicarbonyl product [PhBP(iPr)(3)]Co(I)(CO)(2) (9). Complexes 5 and 6 also bound CO readily, providing the octahedral, 18-electron complexes [PhBP(iPr)(3)]RuCl(CO)(2) (10) and [PhBP(3)]RuCl(CO)(2) (11), respectively. Dimers 5 and 6 were broken up by reaction with trimethylphosphine to produce the mono-PMe(3) adducts [PhBP(iPr)(3)]RuCl(PMe(3)) (12) and [PhBP(3)]RuCl(PMe(3)) (13). Stoichiometric oxidation of 3 with dioxygen provided the 4-electron oxidation product [PhB(CH(2)P(O)(i)Pr(2))(2)(CH(2)P(i)Pr(2))]CoCl (14), while exposure of 3 to excess oxygen results in the 6-electron oxidation product [PhB(CH(2)P(O)(i)Pr(2))(3)]CoCl (15). Complexes 2 and 4 were characterized via cyclic voltammetry to compare their redox behavior to their [PhBP(3)] analogues. Complex 4 was also studied by SQUID magnetization and EPR spectroscopy to confirm its high-spin assignment, providing an interesting contrast to its previously described low-spin relative, [PhBP(3)]CoI. The difference in spin states observed for these two systems reflects the conformational rigidity of the [PhBP(iPr)(3)] ligand by comparison to [PhBP(3)], leaving the former less able to accommodate a JT-distorted electronic ground state.     

Novel dimetal bridging carbene complexes derived from a terminal carbonyl dimetal compound. Syntheses, structures and reactivities of 7H-indene-coordinated diiron bridging carbene complexes

Pentacarbonyl-7H-indenediiron, [Fe2(CO)5(eta3,eta5-C9H8)] (1), reacts with aryllithium, ArLi (Ar = C6H5, p-C6H5C6H4), followed by alkylation with Et3OBF4 to give novel 7H-indene-coordinated diiron bridging alkoxycarbene complexes [Fe2{mu-C(OC2H5)Ar}(CO)4(eta4,eta4-C9H8)] (2, Ar = C6H5; 3, Ar = p-C6H5C6H4). Complexes 2 and 3 react with HBF4.Et2O at low temperature to yield cationic bridging carbyne complexes [Fe2(mu-CAr)(CO)4(eta4,eta4-C9H8)]BF4 (4, Ar = C6H5; 5, Ar = p-C6H5C6H4). Cationic 4 and 5 react with NaBH4 in THF at low temperature to afford diiron bridging arylcarbene complexes [Fe2{mu-C(H)Ar}(CO)4(eta4,eta4-C9H8)] (6, Ar = C6H5; 7, Ar = p-C6H5C6H4). The similar reactions of 4 and 5 with NaSC6H4CH3-p produce the bridging arylthiocarbene complexes [Fe2{mu-C(Ar)SC6H4CH3-p}(CO)4(eta4,eta4-C9H8)] (8, Ar = C6H5; 9, Ar = p-C6H5C6H4). Cationic 4 and 5 can also react with anionic carbonylmetal compounds Na[M(CO)5(CN)] (M = Cr, Mo, W) to give the diiron bridging aryl(pentacarbonylcyanometal)carbene complexes [Fe2{mu-C(Ar)NCM(CO)5}(CO)4(eta4,eta4-C9H8)] (10, Ar = C6H5, M = Cr; 11, Ar = p-C6H5C6H4, M = Cr; 12, Ar = C6H5, M = Mo; 13, Ar = p-C6H5C6H4, M = Mo; 14, Ar = C6H5, M = W; 15, Ar = p-C6H5C6H4, M = W). Interestingly, in CH2Cl2 solution at room temperature complexes 10-15 were transformed into the isomerized 7H-indene-coordinated monoiron complexes [Fe(CO)2(eta5-C9H8)C(Ar)NCM(CO)5] (16, Ar = C6H5, M = Cr; 17, Ar = p-C6H5C6H4, M = Cr; 18, Ar = C6H5, M = Mo; 19, Ar = p-C6H5C6H4, M = Mo; 20, Ar = C6H5, M = W; 21, Ar = p-C6H5C6H4, M = W), while complex 3 was converted into a novel ring addition product [Fe2{C(OC2H5)C6H4C6H5-p-(eta2,eta5-C9H8)}(CO)5] (22) under the same conditions. The structures of complexes 2, 6, 8, 14, 18 and 22 have been established by X-ray diffraction studies.     

New complexes of zirconium(IV) and hafnium(IV) with heteroscorpionate ligands and the hydrolysis of such complexes to give a zirconium cluster

A series of zirconium and hafnium heteroscorpionate complexes have been prepared by the reaction of MCl4 (M = Zr, Hf) with the compounds [[Li(bdmpza)(H2O)](4)] [bdmpza = bis(3,5-dimethylpyrazol-1-yl)acetate], [[Li(bdmpzdta)(H2O)](4)] [bdmpzdta = bis(3,5-dimethylpyrazol-1-yl)dithioacetate], and (Hbdmpze) [bdmpze = 2,2-bis(3,5-dimethylpyrazol-1-yl)ethoxide] (the latter with the prior addition of Bu(n)Li). Under the appropriate experimental conditions, mononuclear complexes, namely, [MCl3(kappa3-bdmpzx)] [x = a, M = Zr (1), Hf (2); x = dta, M = Zr (3), Hf (4); x = e, M = Zr (5), Hf (6)], and dinuclear complexes, namely, [[MCl2(mu-OH)(kappa3-bdmpzx)]2] [x = a, M = Zr (7), Hf (8); x = dta, M = Zr (9); x = e, M = Zr (10)], were isolated. A family of alkoxide-containing complexes of the general formula [ZrCl2(kappa3-bdmpzx)(OR)] [x = a, R = Me (11), Et (12), iPr (13), tBu (14); x = dta, R = Me (15), Et (16), iPr (17), tBu (18); x = e, R = Me (19), Et (20), (i)Pr (21), (t)Bu (22)] was also prepared. Complexes 11-14 underwent an interesting hydrolysis process to give the cluster complex [Zr6(mu3-OH)8(OH)8(kappa2-bdmpza)8] (23). The structures of these complexes have been determined by spectroscopic methods, and the X-ray crystal structures of 7, 8, and 23 were also established.     

Bringing an important macrocycle into a polyoxometalate matrix: synthesis, crystal structure, spectroscopy and electrochemistry of [Co(III)(transdiene)(Cl)2]2[Mo6O19], [Ni(II)(transdiene)][W6O19]·DMSO·DCM and [Zn(II)(transdsiene)(Cl)]2[W6O19

Three polyoxometalate based ion pair solids (1-3), in which Co(III) (d(6)), Ni(II) (d(8)) and Zn(II) (d(10)) complexes of a tetra-aza macrocycle, Me(6)-trans-[14]-diene act as the cationic moieties, have been reported. The title complexes, formulated as [Co (C(16)H(32)N(4))(Cl)(2)](2)[Mo(6)O(19)] (1), [Ni(C(16)H(32)N(4))][W(6)O(19)]·DMSO·DCM (2) and [Zn(C(16)H(32)N(4))(Cl)](2)[W(6)O(19)] (3) (C(16)H(32)N(4) = Me(6)-trans-[14]-diene), are the first crystallographic paradigms where transition metal complexes of a Schiff condensed tetra-aza macrocycle have been associated with an isopolyanion, [M(6)O(19)](2-) (M = Mo(vi) and W(vi)). Compounds 1-3 have been characterized through routine spectroscopic analyses including elemental analysis and their structures have been unambiguously determined through single crystal X-ray crystallography. The molecules of compound 1 assemble obeying P1 (#2) space symmetry, whereas those of compounds 2 and 3 follow the higher symmetrical ensemble P2(1)/c (#14). The ESR spectral studies of compounds 1-3 have revealed their diamagnetic (low-spin) nature. The last part of this article describes the electrochemical properties of the title compounds.     

Synthesis and Crystal Structure of One-dimensional Chain Complexes [K(18-C-6)]2[M(mnt)2](M=Zn, Hg)

IntroductionThe 1 ,2 - dicyanoethene- 1 ,2 - dithiolato anion isa bidentate ligand.It can form square- coplanarcomplexes with many transition metal ions and hasfound a lot of application in analytical chemistry,catalyst and biochemistry.In recent years,metalcomplexes containing mnt and its dithiolate analogligands have been extensively studied and have re-ceived considerable attention due to their potentialapplication in charge transfer and storage,molecu-lar metals,magnetic materials,supercon…     

Dimethylsulfoxide as a ligand for RhI and IrI complexes--isolation, structure, and reactivity towards X-H bonds (X=H, OH, OCH3)

Novel neutral and cationic Rh(I) and Ir(I) complexes that contain only DMSO molecules as dative ligands with S-, O-, and bridging S,O-binding modes were isolated and characterized. The neutral derivatives [RhCl(DMSO)(3)] (1) and [IrCl(DMSO)(3)] (2) were synthesized from the dimeric precursors [M(2)Cl(2)(coe)(4)] (M=Rh, Ir; COE=cyclooctene). The dimeric Ir(I) compound [Ir(2)Cl(2)(DMSO)(4)] (3) was obtained from 2. The first example of a square-planar complex with a bidentate S,O-bridging DMSO ligand, [(coe)(DMSO)Rh(micro-Cl)(micro-DMSO)RhCl(DMSO)] (4), was obtained by treating [Rh(2)Cl(2)(coe)(4)] with three equivalents of DMSO. The mixed DMSO-olefin complex [IrCl(cod)(DMSO)] (5, COD=cyclooctadiene) was generated from [Ir(2)Cl(2)(cod)(2)]. Substitution reactions of these neutral systems afforded the complexes [RhCl(py)(DMSO)(2)] (6), [IrCl(py)(DMSO)(2)] (7), [IrCl(iPr(3)P)(DMSO)(2)] (8), [RhCl(dmbpy)(DMSO)] (9, dmbpy=4,4'-dimethyl-2,2'-bipyridine), and [IrCl(dmbpy)(DMSO)] (10). The cationic O-bound complex [Rh(cod)(DMSO)(2)]BF(4) (11) was synthesized from [Rh(cod)(2)]BF(4). Treatment of the cationic complexes [M(coe)(2)(O=CMe(2))(2)]PF(6) (M=Rh, Ir) with DMSO gave the mixed S- and O-bound DMSO complexes [M(DMSO)(2)(DMSO)(2)]PF(6) (Rh=12; Ir=in situ characterization). Substitution of the O-bound DMSO ligands with dmbpy or pyridine resulted in the isolation of [Rh(dmbpy)(DMSO)(2)]PF(6) (13) and [Ir(py)(2)(DMSO)(2)]PF(6) (14). Oxidative addition of hydrogen to [IrCl(DMSO)(3)] (2) gave the kinetic product fac-[Ir(H)(2)Cl(DMSO)(3)] (15) which was then easily converted to the more thermodynamically stable product mer-[Ir(H)(2)Cl(DMSO)(3)] (16). Oxidative addition of water to both neutral and cationic Ir(I) DMSO complexes gave the corresponding hydrido-hydroxo addition products syn-[(DMSO)(2)HIr(micro-OH)(2)(micro-Cl)IrH(DMSO)(2)][IrCl(2)(DMSO)(2)] (17) and anti-[(DMSO)(2)(DMSO)HIr(micro-OH)(2)IrH(DMSO)(2)(DMSO)][PF(6)](2) (18). The cationic [Ir(DMSO)(2)(DMSO)(2)]PF(6) complex (formed in situ from [Ir(coe)(2)(O=CMe(2))(2)]PF(6)) also reacts with methanol to give the hydrido-alkoxo complex syn-[(DMSO)(2)HIr(micro-OCH(3))(3)IrH(DMSO)(2)]PF(6) (19). Complexes 1, 2, 4, 5, 11, 12, 14, 17, 18, and 19 were characterized by crystallography.     

Synthesis and Characterization of Ethylthioethylcyclopenta-dienyl Organolanthanide Complexes:Cp_2~(Th)LnCl(Ln=Gd,Dy),Cp_2LnCp~(Th)(Ln=Yb,Sm,Dy,Y) and Cp~(Th)ErCl_2·2THF

Introduction Functional substituted cyclopentadienyl organolan-thanide complexes continue to attract considerable at-tention because these donor-functionalized side chains can increase the stability of highly reactive organolan-thanide complexes by forming the additional in-tramolecular chelating coordination with the central metal, and for early lanthanide complexes, the enhanced stability offers the opportunity to explore the reactivity of the remaining ligands.1-4 In addition, the in-tramol…     

Cyclopropenylidene carbene ligands in palladium catalysed coupling reactions: carbene ligand rotation and application to the Stille reaction

Reaction of [Pd(PPh(3))(4)] with 1,1-dichloro-2,3-diarylcyclopropenes gives complexes of the type cis-[PdCl(2)(PPh(3))(C(3)(Ar)(2))] (Ar = Ph 5, Mes 6). Reaction of [Pd(dba)(2)] with 1,1-dichloro-2,3-diarylcyclopropenes in benzene gave the corresponding binuclear palladium complexes trans-[PdCl(2)(C(3)(Ar)(2))](2) (Ar = Ph 7, p-(OMe)C(6)H(4)8, p-(F)C(6)H(4)9). Alternatively, when the reactions were performed in acetonitrile, the complexes trans-[PdCl(2)(NCMe)(C(3)(Ar)(2))] (Ar = Ph 10, p-(OMe)C(6)H(4)11 and p-(F)C(6)H(4)) 12) were isolated. Addition of phosphine ligands to the binuclear palladium complex 7 or acetonitrile adducts 11 and 12 gave complexes of the type cis-[PdCl(2)(PR(3))(C(3)(Ar)(2))] (Ar = Ph, R = Cy 13, Ar = p-(OMe)C(6)H(4), R = Ph 14, Ar = p-(F)C(6)H(4), R = Ph 15). Crystal structures of complexes 6·3.25CHCl(3), 10, 11·H(2)O and 12-15 are reported. DFT calculations of complexes 10-12 indicate the barrier to rotation about the carbene-palladium bond is very low, suggesting limited double bond character in these species. Complexes 5-9 were tested for catalytic activity in C-C coupling (Mizoroki-Heck, Suzuki-Miyaura and, for the first time, Stille reactions) and C-N coupling (Buchwald-Hartwig amination) showing excellent conversion with moderate to high selectivity.     

Synthesis and characterization of fluorophenylpalladium pincer complexes: electronic properties of some pincer ligands evaluated by multinuclear NMR spectroscopy and electrochemical studies

Palladium fluorophenyl complexes with different pincer ligands Pd(Ar)[2,6-(tBu(2)PCH(2))(2)C(6)H(3)] (13), Pd(Ar)[2,6-(tBu(2)PO)(2)C(6)H(3)] (14), Pd(Ar)[{2,5-(tBu(2)PCH(2))(2)C(5)H(2)}Fe(C(5)H(5))] (15), and Pd(Ar)[{2,5-(tBu(2)PCH(2))(2)C(5)H(2)}Ru(C(5)H(5))] (16) were synthesized by the reaction of LiAr (Ar = C(6)H(4)F-4) with the respective trifluoroacetate palladium pincer complexes 9-12. The molecular structures of 14 and 16 were determined by an X-ray crystallographic method. Complexes 13-16 and {Pd(Ar)[{2,5-(tBu(2)PCH(2))(2)C(5)H(2)}Fe(C(5)H(5))]}PF(6) (17) were studied by multinuclear NMR spectroscopy and cyclic voltammetry. On the basis of (19)F NMR chemical shifts and (1)J((13)C-(19)F) coupling constants, as well as Pd(II)/Pd(IV) oxidation potentials, electronic characteristics of the corresponding pincer ligands were elucidated.     

Synthesis and reactivity of Ir(I) and Ir(III) complexes with MeNH2, Me2C=NR (R = H, Me), C,N-C6H4{C(Me)=N(Me)}-2, and N,N'-RN=C(Me)CH2C(Me2)NHR (R = H, Me) ligands

Complexes [Ir(Cp*)Cl(n)(NH2Me)(3-n)]X(m) (n = 2, m = 0 (1), n = 1, m = 1, X = Cl (2a), n = 0, m = 2, X = OTf (3)) are obtained by reacting [Ir(Cp*)Cl(mu-Cl)]2 with MeNH2 (1:2 or 1:8) or with [Ag(NH2Me)2]OTf (1:4), respectively. Complex 2b (n = 1, m = 1, X = ClO 4) is obtained from 2a and NaClO4 x H2O. The reaction of 3 with MeC(O)Ph at 80 degrees C gives [Ir(Cp*){C,N-C6H4{C(Me)=N(Me)}-2}(NH2Me)]OTf (4), which in turn reacts with RNC to give [Ir(Cp*){C,N-C6H4{C(Me)=N(Me)}-2}(CNR)]OTf (R = (t)Bu (5), Xy (6)). [Ir(mu-Cl)(COD)]2 reacts with [Ag{N(R)=CMe2}2]X (1:2) to give [Ir{N(R)=CMe2}2(COD)]X (R = H, X = ClO4 (7); R = Me, X = OTf (8)). Complexes [Ir(CO)2(NH=CMe2)2]ClO4 (9) and [IrCl{N(R)=CMe2}(COD)] (R = H (10), Me (11)) are obtained from the appropriate [Ir{N(R)=CMe2}2(COD)]X and CO or Me4NCl, respectively. [Ir(Cp*)Cl(mu-Cl)]2 reacts with [Au(NH=CMe2)(PPh3)]ClO4 (1:2) to give [Ir(Cp*)(mu-Cl)(NH=CMe2)]2(ClO4)2 (12) which in turn reacts with PPh 3 or Me4NCl (1:2) to give [Ir(Cp*)Cl(NH=CMe2)(PPh3)]ClO4 (13) or [Ir(Cp*)Cl2(NH=CMe2)] (14), respectively. Complex 14 hydrolyzes in a CH2Cl2/Et2O solution to give [Ir(Cp*)Cl2(NH3)] (15). The reaction of [Ir(Cp*)Cl(mu-Cl)]2 with [Ag(NH=CMe2)2]ClO4 (1:4) gives [Ir(Cp*)(NH=CMe2)3](ClO4)2 (16a), which reacts with PPNCl (PPN = Ph3=P=N=PPh3) under different reaction conditions to give [Ir(Cp*)(NH=CMe2)3]XY (X = Cl, Y = ClO4 (16b); X = Y = Cl (16c)). Equimolar amounts of 14 and 16a react to give [Ir(Cp*)Cl(NH=CMe2)2]ClO4 (17), which in turn reacts with PPNCl to give [Ir(Cp*)Cl(H-imam)]Cl (R-imam = N,N'-N(R)=C(Me)CH2C(Me)2NHR (18a)]. Complexes [Ir(Cp*)Cl(R-imam)]ClO4 (R = H (18b), Me (19)) are obtained from 18a and AgClO4 or by refluxing 2b in acetone for 7 h, respectively. They react with AgClO4 and the appropriate neutral ligand or with [Ag(NH=CMe2)2]ClO4 to give [Ir(Cp*)(R-imam)L](ClO4)2 (R = H, L = (t)BuNC (20), XyNC (21); R = Me, L = MeCN (22)) or [Ir(Cp*)(H-imam)(NH=CMe2)](ClO4)2 (23a), respectively. The later reacts with PPNCl to give [Ir(Cp*)(H-imam)(NH=CMe2)]Cl(ClO4) (23b). The reaction of 22 with XyNC gives [Ir(Cp*)(Me-imam)(CNXy)](ClO4)2 (24). The structures of complexes 15, 16c and 18b have been solved by X-ray diffraction methods.     

Homoleptic diphosphacyclobutadiene complexes [M(η(4)-P2C2R2)2]x- (M = Fe, Co; x = 0, 1)

The preparation and comprehensive characterization of a series of homoleptic sandwich complexes containing diphosphacyclobutadiene ligands are reported. Compounds [K([18]crown-6)(thf)(2)][Fe(η(4)-P(2)C(2)tBu(2))(2)] (K1), [K([18]crown-6)(thf)(2)][Co(η(4)-P(2)C(2)tBu(2))(2)] (K2), and [K([18]crown-6)(thf)(2)][Co(η(4)-P(2)C(2)Ad(2))(2)] (K3, Ad = adamantyl) were obtained from reactions of [K([18]crown-6)(thf)(2)][M(η(4)-C(14)H(10))(2)] (M = Fe, Co) with tBuC[triple bond]P (1, 2), or with AdC[triple bond]P (3). Neutral sandwiches [M(η(4)-P(2)C(2)tBu(2))(2)] (4: M = Fe 5: M = Co) were obtained by oxidizing 1 and 2 with [Cp(2)Fe]PF(6). Cyclic voltammetry and spectro-electrochemistry indicate that the two [M(η(4)-P(2)C(2)tBu(2))(2)](-)/[M(η(4)-P(2)C(2)tBu(2))(2)] moieties can be reversibly interconverted by one electron oxidation and reduction, respectively. Complexes 1-5 were characterized by multinuclear NMR, EPR (1 and 5), UV/Vis, and M?ssbauer spectroscopies (1 and 4), mass spectrometry (4 and 5), and microanalysis (1-3). The molecular structures of 1-5 were determined by using X-ray crystallography. Essentially D(2d)-symmetric structures were found for all five complexes, which show the two 1,3-diphosphacyclobutadiene rings in a staggered orientation. Density functional theory calculations revealed the importance of covalent metal-ligand π bonding in 1-5. Possible oxidation state assignments for the metal ions are discussed.     

A systematic study on the synthesis, reactivity and structure of ortho-palladated aryloximes, including the first cyclopalladated aryloximato and iminoaryloxime complexes

Complexes [Pd{C,N-Ar{C(Me)=NOH}-2}(μ-Cl)](2) (1) with Ar = C(6)H(4), C(6)H(3)NO(2)-5 or C(6)H(OMe)(3)-4,5,6, were obtained from the appropriate oxime, Li(2)[PdCl(4)] and NaOAc. They reacted with neutral monodentate C-, P- or N-donor ligands (L), with [PPN]Cl ([PPN] = Ph(3)P=N=PPh(3)), with Tl(acac) (acacH = acetylacetone), or with neutral bidentate ligands N^N (tetramethylethylenediamine (tmeda), 4,4'-di-tert-butyl-2,2'-bipyridine ((t)Bubpy)) in the presence of AgOTf or AgClO(4) to afford complexes of the types [Pd{C,N-Ar{C(Me)=NOH}-2}Cl(L)] (2), [PPN][Pd{C,N-Ar{C(Me)=NOH}-2}Cl(2)] (3), [Pd{C,N-Ar{C(Me)=NOH}-2}(acac)] (4) or [Pd{C,N-Ar{C(Me)=NOH}-2}(N^N)]X (X = OTf, ClO(4)) (5), respectively. Complexes 1 reacted with bidentate N^N ligands in the presence of a base to afford mononuclear zwitterionic oximato complexes [Pd{C,N-Ar{C(Me)=NO}-2}(N^N)] (6). Dehydrochlorination of complexes 2 by a base yielded dimeric oximato complexes of the type [Pd{μ-C,N,O-Ar{C(Me)[double bond, length as m-dash]NO}-2}L](2) (7). The insertion of XyNC into the Pd-C(aryl) bond of complex 2 produced the mononuclear iminoaryloxime derivative [Pd{C,N-C(=NXy)Ar{C(Me)=NOH}-2}Cl(CNXy)] (8) which, in turn, reacted with [AuCl(SMe(2))] to give [Pd{μ-N,C,N-C(=NXy)Ar{C(Me)=NOH}-2}Cl](2) (9) with loss of XyNC. Some of these complexes are, for any metal, the first containing cyclometalated aryloximato (6, 7) or iminoaryloxime (8, 9) ligands. Various crystal structures of complexes of the types 2, 3, 6, 7, 8 and 9 have been determined.     

Molybdenum oxo-imido aryloxide complexes: oxo analogues of olefin metathesis catalysts

The novel 16-electron molybdenum oxo-imido bis(aryloxide) complexes [Mo(NtBu)(O)(2,6-Me2C6H3O)2(py)] (1) and [Mo(NtBu)(O)(2,6-iPr2C6H3O)2(py)] (2) have been prepared by the salt elimination reactions of [Mo(NtBu)(O)Cl2(DME)] with the appropriate lithium aryloxide and from the cycloaddition reactions of tert-butyl isocyanate with the appropriate molybdenum dioxo bis(aryloxide) complex [Mo(O)2(OAr)2(py)n]. Complexes 1 and 2 are the first isolable and crystallographically characterized molybdenum oxo-imido aryloxide complexes. The geometry around the metal in complexes 1 and 2 is best described as a distorted trigonal bipyramid, with the imido and pyridine ligands occupying the axial positions and the oxo and aryloxide ligands in the equatorial plane. X-ray and IR data have confirmed that the imido ligand is the dominant pi donor in the complexes, resulting in an Mo-O bond order of less than 2.5. Reaction of [Mo(NtBu)(O)Cl2(DME)] with Li(OCH2tBu) instead gave the novel complex [Mo(NtBu)(OCH2tBu)3Cl(py)] (3).     

Novel tailoring reaction for two adjacent coordinated nitriles giving platinum 1,3,5-triazapentadiene complexes

The tailoring reaction of the two adjacent nitrile ligands in cis-[PtCl(2)(RCN)(2)] (R = Me, Et, CH(2)Ph, Ph) and [Pt(tmeda)(EtCN)(2)][SO(3)CF(3)](2) (8.(OTf)(2); tmeda = N,N,N',N'-tetramethylethylenediamine) upon their interplay with N,N'-diphenylguanidine (DPG; NH=C(NHPh)(2)), in a 1:2 molar ratio gives the 1,3,5-triazapentadiene complexes [PtCl(2){NHC(R)NHC(R)=NH}] (1-4) and [Pt(tmeda){NHC(Et)NHC(Et)NH}][SO(3)CF(3)](2) (10.(OTf)(2)), respectively. In contrast to the reaction of 8.(OTf)(2) with NH=C(NHPh)(2), interaction of 8.(OTf)(2) with excess gaseous NH(3) leads to formation of the platinum(II) bis(amidine) complex cis-[Pt(tmeda){NH=C(NH(2))Et}(2)][SO(3)CF(3)](2) (9.(OTf)(2)). Treatment of trans-[PtCl(2)(RCN)(2)] (R = Et, CH(2)Ph, Ph) with 2 equiv of NH=C(NHPh)(2) in EtCN (R = Et) and CH(2)Cl(2) (R = CH(2)Ph, Ph) solutions at 20-25 degrees C leads to [PtCl{NH=C(R)NC(NHPh)=NPh}(RCN)] (11-13). When any of the trans-[PtCl(2)(RCN)(2)] (R = Et, CH(2)Ph, Ph) complexes reacts in the corresponding nitrile RCN with 4 equiv of DPG at prolonged reaction time (75 degrees C, 1-2 days), complexes containing two bidentate 1,3,5-triazapentadiene ligands, i.e. [Pt{NH=C(R)NC(NHPh)=NPh}(2)] (14-16), are formed. Complexes 14-16 exhibit strong phosphorescence in the solid state, with quantum yields (peak wavelengths) of 0.39 (530 nm), 0.61 (460 nm), and 0.74 (530 nm), respectively. The formulation of the obtained complexes was supported by satisfactory C, H, and N elemental analyses, in agreement with FAB-MS, ESI-MS, IR, and (1)H and (13)C{(1)H} NMR spectra. The structures of 1, 2, 4, 11, 13, 14, 9.(picrate)(2), and 10.(picrate)(2) were determined by single-crystal X-ray diffraction.     

Synthesis and reactivity of calix[4]arene-supported group 4 imido complexes

New mononuclear titanium and zirconium imido complexes [M(NR)(R'(2)calix)] [M=Ti, R'=Me, R=tBu (1), R=2,6-C(6)H(3)Me(2) (2), R=2,6-C(6)H(3)iPr(2) (3), R=2,4,6-C(6)H(2)Me(3) (4); M=Ti, R'=Bz, R=tBu (5), R=2,6-C(6)H(3)Me(2) (6), R=2,6-C(6)H(3)iPr(2) (7); M=Zr, R'=Me, R=2,6-C(6)H(3)iPr(2) (8)] supported by 1,3-diorganyl ether p-tert-butylcalix[4]arenes (R'(2)calix) were prepared in good yield from the readily available complexes [MCl(2)(Me(2)calix)], [Ti(NR)Cl(2)(py)(3)], and [Ti(NR)Cl(2)(NHMe(2))(2)]. The crystallographically characterised complex [Ti(NtBu)(Me(2)calix)] (1) reacts readily with CO(2), CS(2), and p-tolyl-isocyanate to give the isolated complexes [Ti[N(tBu)C(O)O](Me(2)calix)] (10), [[Ti(mu-O)(Me(2)calix)](2)] (11), [[Ti(mu-S)(Me(2)calix)](2)] (12), and [Ti[N(tBu)C(O)N(-4-C(6)H(4)Me)](Me(2)calix)] (13). In the case of CO(2) and CS(2), the addition of the heterocumulene to the Ti-N multiple bond is followed by a cycloreversion reaction to give the dinuclear complexes 11 and 12. The X-ray structure of 13.4(C(7)H(8)) clearly establishes the N,N'-coordination mode of the ureate ligand in this compound. Complex 1 undergoes tert-butyl/arylamine exchange reactions to form 2, 3, [Ti(N-4-C(6)H(4)Me)(Me(2)calix)] (14), [Ti(N-4-C(6)H(4)Fc)(Me(2)calix)] (15) [Fc=Fe(eta(5)-C(5)H(5))(eta(5)-C(5)H(4))], and [[Ti(Me(2)calix)](2)[mu-(N-4-C(6)H(4))(2)CH(2)]] (16). Reaction of 1 with H(2)O, H(2)S and HCl afforded the compounds [[Ti(mu-O)(Me(2)calix)](2)] (11), [[Ti(mu-S)(Me(2)calix)](2)] (12), and [TiCl(2)(Me(2)calix)] in excellent yields. Furthermore, treatment of 1 with two equivalents of phenols results in the formation of [Ti(O-4-C(6)H(4)R)(2)(Me(2)calix)] (R=Me 17 or tBu 18), [Ti(O-2,6-C(6)H(3)Me(2))(2)(Me(2)calix)] (19) and [Ti(mbmp)(Me(2)calix)] (20; H(2)mbmp=2,2'-methylene-bis(4-methyl-6-tert-butylphenol) or CH(2)([CH(3)][C(4)H(9)]C(6)H(2)-OH)(2)). The bis(phenolate) compounds 17 and 18 with para-substituted phenolate ligands undergo elimination and/or rearrangement reactions in the nonpolar solvents pentane or hexane. The metal-containing products of the elimination reactions are dinuclear complexes [[Ti(O-4-C(6)H(4)R)(Mecalix)](2)] [R=Me (23) or tBu (24)] where Mecalix=monomethyl ether of p-tert-butylcalix[4]arene. The products of the rearrangement reaction are [Ti(O-4-C(6)H(4)Me)(2) (paco-Me(2)calix)] (25) and [Ti(O-4-C(6)H(4)tBu)(2)(paco-Me(2)calix)] (26), in which the metallated calix[4]arene ligand is coordinated in a form reminiscent of the partial cone (paco) conformation of calix[4]arene. In these compounds, one of the methoxy groups is located inside the cavity of the calix[4]arene ligand. The complexes 24, 25 and 26 have been crystallographically characterised. Complexes with sterically more demanding phenolate ligands, namely 19 and 20 and the analogous zirconium complexes [Zr(O-4-C(6)H(4)Me)(2)(Me(2)calix)] (21) and [Zr(O-2,6-C(6)H(3)Me(2))(2)(Me(2)calix)] (22) do not rearrange. Density functional calculations for the model complexes [M(OC(6)H(5))(2)(Me(2)calix)] with the calixarene possessing either cone or partial cone conformations are briefly presented.     

Chiral iridium [corrected] xyliphos complexes for the catalytic imine hydrogenation leading to the metolachlor herbicide: isolation of catalyst-substrate adducts

Iridium complexes relevant to the catalytic enantioselective hydrogenation of 2-methyl-6-ethylphenyl-1'-methyl-2'-methoxyethylimine (MEA-imine, 1) in the Syngenta Metolachlor (3) process were prepared and characterized. Reaction of the diphosphane (S)-1-[(R)-2-(diphenylphosphanyl)ferrocenyl]ethyldi(3,5-xylyl)phosphane ((S)-(R)-Xyliphos, (S)-(R)-4) with [Ir(2)(micro-Cl)(2)(cod)(2)] (cod=1,5-cyclooctadiene) afforded [Ir(Cl)(cod)[(S)-(R)-4]] (7), which reacted with AgBF(4) to form [Ir(cod)[(S)-(R)-4]]BF(4) (8). Complexes 7 and 8 reacted with iodide to yield [Ir(I)(cod)[(S)-(R)-4]] (9). When 9 was treated with one and two equivalents of HBF(4), two isomers of the cationic Ir(III) iodo hydrido complex [Ir(I)(H)(cod)[(S)-(R)-4]]BF(4) were solated (10 and 11, respectively). Complex 9 was oxidized with one equivalent of I(2) to give the iodo-bridged dinuclear species [Ir(2)I(2)(micro-I)(3)[(S)-(R)-4](2))]I (12). [Ir(2)(micro-Cl)(2)(coe)(4)] (coe=cyclooctene) reacted with (S)-(R)-4 to yield the chloro-bridged dinuclear complex [Ir(2)(micro-Cl)(2)[(S)-(R)-4](2)] (13). Complexes 7-12 were structurally characterized by single-crystal X-ray diffraction and tested as single-component catalyst precursors for enantioselective hydrogenation of MEA-imine. Complex 10 and dinuclear complex 12 gave the best catalytic results. Efforts were also directed at isolating substrate- or product-catalyst adducts: Treatment of 8 with 2,6-dimethylphenyl-1'-methyl-2'-methoxyethylimine (DMA-imine, 14, a model for 1) under H(2) allowed four isomers of [Ir(H)(2)[(S)-(R)-4](14)]BF(4) (18-21) to be isolated. These analytically pure isomers were fully characterized by 2D NMR techniques. X-ray structural analysis of an Ir(I)-imine adduct, namely, [Ir(C(2)H(4))(2)(14)]BF(4) (25), which was prepared by reacting [IrCl(C(2)H(4))(4)] with [Ag(14)(2)]BF(4) (16), confirmed the kappa(2) coordination mode of imine 14.     

Transition metal-carbon complexes. A theoretical study

The equilibrium geometries and bond dissociation energies of 16VE and 18VE complexes of ruthenium and iron with a naked carbon ligand are reported using density functional theory at the BP86/TZ2P level. Bond energies were also calculated at CCSD(T) using TZ2P quality basis sets. The calculations of [Cl2(PMe3)2Ru(C)] (1Ru), [Cl2(PMe3)2Fe(C)] (1Fe), [(CO)2(PMe3)2Ru(C)] (2Ru), [(CO)2(PMe3)2Fe(C)] (2Fe), [(CO)4Ru(C)] (3Ru), and [(CO)4Fe(C)] (3Fe) show that 1Ru has a very strong Ru-C bond which is stronger than the Fe-C bond in 1Fe. The metal-carbon bonds in the 18VE complexes 2Ru-3Fe are weaker than those in the 16VE species. Calculations of the related carbonyl complexes [(PMe3)2Cl2Ru(CO)] (4Ru), [(PMe3)2Cl2Fe(CO)] (4Fe), [(PMe3)2Ru(CO)3] (5Ru), [(PMe3)2Fe(CO)3] (5Fe), [Ru(CO)5] (6Ru), and [Fe(CO)5] (6Fe) show that the metal-CO bonds are much weaker than the metal-C bonds. The 18VE iron complexes have a larger BDE than the 18VE ruthenium complexes, while the opposite trend is calculated for the 16VE compounds. Charge and energy decomposition analyses (EDA) have been carried out for the calculated compounds. The Ru-C and Fe-C bonds in 1Ru and 1Fe are best described in terms of two electron-sharing bonds with sigma and pi symmetry and one donor-acceptor pi bond. The bonding situation in the 18 VE complexes 2Ru-3Fe is better described in terms of closed shell donor-acceptor interactions in accordance with the Dewar-Chatt-Duncanson model. The bonding analysis clearly shows that the 16VE carbon complexes 1Ru and 1Fe are much more strongly stabilized by metal-C sigma interactions than the 18VE complexes which is probably the reason why the substituted homologue of 1Ru could become isolated. The EDA calculations show that the nature of the TM-C and TM-CO binding interactions resembles each other. The absolute values for the energy terms which contribute to Delta(Eint) are much larger for the carbon complexes than for the carbonyl complexes, but the relative strengths of the energy terms are not very different from each other. The pi bonding contribution to the orbital interactions in the carbon complexes is always stronger than sigma bonding. There is no particular bonding component which is responsible for the reversal of the relative bond dissociation energies of the Ru and Fe complexes when one goes from the 16VE complexes to the 18VE species. That the 18 VE compounds have longer and weaker TM-C and TM-CO bonds than the respective 16 VE compounds holds for all complexes. This is because the LUMO in the 16 VE species is a sigma-antibonding orbital which becomes occupied in the 18 VE species.     

Ruthenium(III) triazacyclononane dithiocarbamate,pyridinecarboxylate, or aminocarboxylate complexes as scavengers of nitric oxide

The preparation of a series of [Ru(III)(tacn)(eta(2)-dtc)(eta(1)-dtc)][PF(6)] (tacn = 1,4,7-triazacyclononane; dtc = dimethyldithiocarbamate, diethyldithiocarbamate, pyrrolidinedithiocarbamate, l-prolinedithiocarbamate, l-prolinemethyl ester dithiocarbamate, l-N-methylisoleucinedithiocarbamate) complexes, 5-11, is described. Complex 5 reacts with NO to form the ruthenium nitrosyl complex 12. A series of [Ru(III)(tacn)(pyc)Cl][PF(6)] (pyc = 2-pyridinecarboxylic acid, 2,4- and 2,6-pyridinecarboxylic acid) complexes, 14-16, were prepared along with [Ru(III)(tacn)(mida)][PF(6)] (mida = N-methyliminodiacetic acid), 13, and [Ru(III)(Hnota)Cl], 17, (Hnota = 1-acetic acid-4,7-bismethylcarboxylate-1,4,7-triazacyclononane). Complexes 5-17 were evaluated for use as NO scavengers in an in vitro assay using RAW264 murine macrophage cells. [Ru(III)(tacn)(eta(2)-dtc)(eta(1)-dtc)][PF(6)] complexes 5-11 are very efficient NO scavengers in this assay.     

Molecular design of luminescence ion probes for various cations based on weak gold(I)...gold(I) interactions in dinuclear gold(I) complexes

A series of luminescent dinuclear gold(I) complexes with different crown ether pendants, [Au(2)(PwedgeP)(S-B15C5)(2)] [S-B15C5 = 4'-mercaptobenzo-15-crown-5, P(wedge)P = bis(dicyclohexylphosphino)methane (dcpm) (1), bis(diphenylphosphino)methane (dppm) (2)] and [Au(2)(P(wedge)P)(S-B18C6)(2)] [S-B18C6 = 4'-mercaptobenzo-18-crown-6, P(wedge)P = dcpm (3), dppm (4)], and their related crown-free complexes, [Au(2)(P(wedge)P)(SC(6)H(3)(OMe)(2)-3,4)(2)] [P(wedge)P = dcpm (5), dppm (6)], were synthesized. The low-energy emission of the mercaptocrown ether-containing gold(I) complexes are tentatively assigned as originated from states derived from a S --> Au ligand-to-metal charge transfer (LMCT) transition. The crown ether-containing gold(I) complexes showed specific binding abilities toward various metal cations according to the ring size of the crown pendants. Spectroscopic evidence was provided for the metal-ion-induced switching on of the gold...gold interactions upon the binding of particular metal ions in a sandwich binding mode.     

One- or two-dimensional 2,3-naphtho crown ether complexes [Na(N15C5)]2[M(SCN)4] and [K(N18C6)]2[M(SCN)4] (M = Pd, Pt) constructed by pi-pi stacking interactions

Four novel 2,3-naphtho-15-crown-5 (N15C5) and 2,3-naphtho-18-crown-6 (N18C6) complexes [Na(N15C5)]2[Pd(SCN)4] (1), [Na(N15C5)]2[Pt(SCN)4] (2), [K(N18C6)]2[Pd(SCN)4] (3) and [K(N18C6)]2[Pt(SCN)4] (4) were synthesized and characterized by elemental analysis, FT-IR spectra and single-crystal X-ray diffraction. The structure analyses reveal that both 1 and 2 are assembled into zigzag chains by the strong intermolecular pi-pi stacking interactions between adjacent 2,3-naphthylene groups of N15C5. The molecules of complexes 3 and 4 are linked into 1D chains by the bridging K-O(ether) interactions between the adjacent [K(N18C6)]+ units and the resulting chains are constructed into a novel 2D network by inter-chain pi-pi stacking interactions between the neighboring 2,3-naphthylene moieties of N18C6. According to the supramolecular self-assemblies of complexes 1-4, two types of stacking model of naphthylene groups are given and discussed.