Fe,Co,Ni掺杂石墨烯表面吸附C_2H_4的第一性原理研究

基于密度泛函理论(DFT)的广义梯度近似(GGA),本文对本征石墨烯以及掺杂Fe,Co,Ni石墨烯的几何结构和电子性质进行了优化计算,并计算了C_2H_4在本征石墨烯以及掺杂石墨烯表面的吸附过程,讨论了体系的吸附能、稳定性、DOS及掺杂对键长的影响.结果表明C_2H_4在本征石墨烯B位的吸附和掺杂石墨烯的吸附为化学吸附,在本征石墨烯T和H位的吸附为物理吸附;掺杂后石墨烯的比表面积增大,与本征石墨烯相比,掺杂使费米能级附近的态密度积分显著提高,表明掺杂石墨烯的电导性会发生变化,从而影响对C_2H_4的气敏度..C_2H_4在Fe、Co、Ni分别掺石墨烯的最佳吸附位为T位、H位和B位;掺杂Fe,Ni后体系的吸附能力显著提高,且掺杂Ni时体系的吸附能力最好.     

B、N掺杂对钠在石墨烯上吸附性能的影响

采用基于密度泛函理论的第一性原理方法,研究了本征石墨烯及缺陷石墨烯对Na原子的吸附行为.主要研究了三种石墨烯:本征石墨烯、B掺杂的石墨烯和N掺杂的石墨烯.结果表明,与本征石墨烯相比,B掺杂的石墨烯和N掺杂的石墨烯在吸附能、电荷密度、态密度和储钠量方面表现出很大的差异.B掺杂的石墨烯对Na原子的吸附能是-1.93 e V,约为本征石墨烯对Na原子吸附能的2.7倍;与本征石墨烯相比,N掺杂的石墨烯对Na原子的吸附能明显增大.态密度计算结果表明,Na原子与B掺杂的石墨烯中的B原子发生轨道杂化,而本征石墨烯和N掺杂的石墨烯中不存在轨道杂化现象.B掺杂的石墨烯对Na原子的吸附量是3个,与本征石墨烯相比显著提高.因此,B掺杂的石墨烯有望成为一种新型的储钠材料.     

缺陷对钠在石墨烯上吸附性能的影响

采用基于密度泛函理论的第一性原理方法,研究了本征石墨烯和缺陷石墨烯吸附钠原子的电荷密度、吸附能、态密度和储存量.结果表明,本征石墨烯中,钠原子的最佳吸附位置为H位,缺陷石墨烯中,钠原子的最佳吸附位置为T_D位.缺陷石墨烯对钠原子的吸附能是-4.423 eV,约为本征石墨烯对钠原子吸附能的2.5倍;钠原子与缺陷石墨烯中的碳原子发生轨道杂化,而与本征石墨烯没有发生轨道杂化现象.缺陷石墨烯能够吸附10个钠原子,与本征石墨烯相比显著提高.因此,缺陷石墨烯有望成为一种潜在的储钠材料.     

缺陷对钠在石墨烯上吸附性能的影响

采用基于密度泛函理论的第一性原理方法,研究了本征石墨烯和缺陷石墨烯吸附钠原子的电荷密度、吸附能、态密度和储存量.结果表明,本征石墨烯中,钠原子的最佳吸附位置为H位,缺陷石墨烯中,钠原子的最佳吸附位置为T_D位.缺陷石墨烯对钠原子的吸附能是-4.423 eV,约为本征石墨烯对钠原子吸附能的2.5倍;钠原子与缺陷石墨烯中的碳原子发生轨道杂化,而与本征石墨烯没有发生轨道杂化现象.缺陷石墨烯能够吸附10个钠原子,与本征石墨烯相比显著提高.因此,缺陷石墨烯有望成为一种潜在的储钠材料.     

缺陷对钠在石墨烯上吸附性能的影响

采用基于密度泛函理论的第一性原理方法,研究了本征石墨烯和缺陷石墨烯吸附钠原子的电荷密度、吸附能、态密度和储存量.结果表明,本征石墨烯中,钠原子的最佳吸附位置为H位,缺陷石墨烯中,钠原子的最佳吸附位置为T_D位.缺陷石墨烯对钠原子的吸附能是-4.423 eV,约为本征石墨烯对钠原子吸附能的2.5倍;钠原子与缺陷石墨烯中的碳原子发生轨道杂化,而与本征石墨烯没有发生轨道杂化现象.缺陷石墨烯能够吸附10个钠原子,与本征石墨烯相比显著提高.因此,缺陷石墨烯有望成为一种潜在的储钠材料.     

氮掺杂的石墨烯作为钠离子电池负极材料的第一性原理研究

采用基于密度泛函理论的第一性原理方法,研究了本征石墨烯、氮掺杂的石墨烯和叽咯石墨烯吸附钠原子的电荷密度、吸附能、态密度和储存量.结果表明,三种石墨烯中,钠原子的最佳吸附位置为H位.与本征石墨烯相比,氮掺杂的石墨烯对钠原子的吸附能提高,叽咯石墨烯对钠原子的吸附能是-3.274 eV,约为本征石墨烯对钠原子吸附能的1.7倍.钠原子与叽咯石墨烯中的氮原子发生轨道杂化,而与本征石墨烯和氮掺杂的石墨烯没有发生轨道杂化现象.叽咯石墨烯能够吸附10个钠原子,与本征石墨烯相比显著提高,氮掺杂的石墨烯只能吸附4个钠原子.因此,叽咯石墨烯有望成为一种潜在的储钠材料.     

钠在空位石墨烯上吸附性能的研究

采用基于密度泛函理论的第一性原理方法,研究了本征石墨烯和空位石墨烯吸附钠原子的电荷密度、吸附能、态密度和储存量.结果表明,在两种石墨烯中,钠原子的最佳吸附位置都为H位.空位石墨烯对钠原子的吸附能是-2. 46 eV,约为本征石墨烯对钠原子吸附能的3. 4倍;钠原子与空位石墨烯中的碳原子发生轨道杂化,而与本征石墨烯没发生轨道杂化现象.存在一个空位的石墨烯能够吸附5个钠原子,与本征石墨烯相比显著提高.因此,空位石墨烯有望成为一种潜在的储钠材料.     

B、N掺杂对钠在石墨烯上吸附性能的影响

采用基于密度泛函理论的第一性原理方法,研究了本征石墨烯及缺陷石墨烯对Na原子的吸附行为。主要研究了三种石墨烯：本征石墨烯、B掺杂的石墨烯和N掺杂的石墨烯。结果表明,与本征石墨烯相比,B掺杂的石墨烯和N掺杂的石墨烯在吸附能、电荷密度、态密度和储钠量方面表现出很大的差异。B掺杂的石墨烯对Na原子的吸附能是-1.93 eV,约为本征石墨烯对Na原子吸附能的2.7倍;与本征石墨烯相比,N掺杂的石墨烯对Na原子的吸附能明显增大。态密度计算结果表明,Na原子与B掺杂的石墨烯中的B原子发生轨道杂化,而本征石墨烯和N掺杂的石墨烯中不存在轨道杂化现象。B掺杂的石墨烯对Na原子的吸附量是3个,与本征石墨烯相比显著提高。因此,B掺杂的石墨烯有望成为一种新型的储钠材料。     

Na在B掺杂的空位石墨烯上吸附性能的第一性原理研究

采用基于密度泛函理论的第一性原理方法,研究了本征石墨烯和B掺杂的空位石墨烯吸附Na原子的电荷密度、吸附能、态密度、储存量以及电极电压.结果表明,两种石墨烯中,Na原子的最佳吸附位置都是H位.B掺杂的空位石墨烯对Na原子的吸附能是-2.08 eV,比本征石墨烯对Na原子的吸附能(-0.71eV)低很多.B掺杂的空位石墨烯中Na原子与B原子发生轨道杂化,本征石墨烯中没有杂化现象.B掺杂的空位石墨烯能够吸附12个Na原子,较本征石墨烯多.因此,B掺杂的空位石墨烯更适合储钠.     

基于密度泛函理论研究掺杂Pd石墨烯吸附O2及CO

基于第一性原理的密度泛函理论研究了单个O₂和CO气体分子吸附于本征石墨烯和掺杂钯(Pd)的石墨烯的体系, 通过石墨烯掺Pd前后气体分子的吸附能、电荷转移及能带和态密度的计算, 发现掺Pd后气体分子吸附能和电荷转移显著增大, 这是由于Pd的掺杂, 在本征石墨烯能带中引入了杂质能级, 增强了石墨烯和吸附气体分子间的相互作用; 氧化性气体O₂和还原性气体CO吸附对石墨烯体系能带结构和态密度的影响明显不同, 本征石墨烯吸附O₂后, 费米能级附近态密度变大, 掺Pd后在一定程度变小; 吸附还原性的CO后, 石墨烯费米能级附近态密度几乎没有改变, 表明掺杂Pd不会影响石墨烯对CO的气体灵敏度, 但由于CO对石墨烯的吸附能增大, 可以提高石墨烯对还原性气体的气敏响应速度.     

石墨烯吸附钛原子的第一性原理研究

基于密度泛函理论研究了单个钛原子分别位于本征石墨烯GR、点缺陷石墨烯（包括空位石墨烯DGR和氮掺杂石墨烯N-GR）薄片表面的吸附机理。通过计算钛原子在本征石墨烯表面不同位置时的吸附结构和吸附能,发现最稳定吸附位置是碳六元环的中心;计算了各个吸附体系的吸附能、态密度和差分电荷密度,研究表明三个吸附体系碳钛间均产生了电子轨道杂化,掺氮后的石墨烯对钛原子的吸附性能略微增强,而空位石墨烯对钛的吸附能是本征石墨烯的4倍,费米能级附近电子态局域化程度最大,吸附效果最好。     

异性官能团修饰石墨烯吸附GIS 特征气体能力的DFT研究

为研制高灵敏度气体绝缘组合开关(GIS)特征气体检测传感器,利用密度泛函理论方法,采用分子模拟软件对GIS特征气体(SO_2,SOF_2,SO_2F_2,CF_4)在异性官能团(羟基、羧基与氨基)修饰石墨烯表面的吸附过程进行模拟计算,从微观角度研究了GIS特征气体在异性官能团修饰石墨烯表面的吸附机理.首先计算了各吸附体系的吸附能、净电荷转移量以及态密度,比较了羟基与羧基修饰石墨烯对GIS特征气体的吸附能力;再通过分子前线轨道与能隙对吸附能力强弱的机理进行了研究,得出强吸附修饰官能团的规律性特征,并通过氨基石墨烯进行验证.结果表明:羧基与羟基修饰石墨烯能够有效提高对SO_2,SOF_2,SO_2F_2的吸附能力,但羧基石墨烯对GIS特征气体的整体吸附能力更强;异性官能团修饰石墨烯后的能隙及其与气体分子前线轨道能量差越小,对GIS特征气体吸附能力就越强,异性官能团修饰石墨烯的能隙与前线轨道能量差可以作为选择特征气体敏感材料的依据.     

First-principles studies of HF molecule adsorption on intrinsic graphene and Al-doped graphene

In the search for a high-sensitivity sensor for HF gas, the adsorption of HF molecules on both intrinsic and Al-doped graphene sheets is studied by first-principles calculations. We find that the adsorption mechanisms of HF molecules are different for intrinsic graphene and Al-doped graphene. Al-doped graphene has higher adsorption energy and shorter connecting distance to the HF molecule than intrinsic graphene. The calculated net electron transfers, electronic density difference images and densities of states give evidence that the adsorption of HF molecules on Al-doped graphene is by chemisorption, while there is weak physisorption on intrinsic graphene. Therefore, Al-doped graphene can be expected to have applications as a novel sensor for the detection of HF gas. The HF molecules adsorbed on Al-doped graphene material can be reactivated by applying an external electric field of 0.013 a.u.     

Effects of vacancy and deformation on an Al atom adsorbed on graphene

First-principles calculations based on density functional theory are carried out to study the adsorption energy of monovacancy and deformation on an Al atom adsorbed on graphene. The bond length and Mulliken charge of an Al atom adsorbed on intrinsic and defected graphene systems are also analyzed. We find that an Al atom, sitting above the H site of intrinsic graphene, is in the most stable location. And the adsorption energy increases with increasing graphene coverage. In 1/32 Al/VC-gra and 1/8 Al/VC-gra Al—C covalent bonds are formed, and the Al—C ionic bonds are enhanced by the vacancy. For our calculations, vacancy and deformation both enhance the adsorption energy of an Al atom adsorbed on a graphene system, but vacancy is more effective. In a tensile system, a geometric distortion is induced in the adsorption structure when the tensile deformation is greater than 15%; in a compression system, the adsorption structure begins to distort from 5%. When the tensile and compressive deformations are greater than 10%, the compressive deformation is more effective than the tension deformation on an Al atom adsorbed on the graphene system. Especially, when the deformation is relatively small, a vacancy has a greater effect on the adsorption energy of an Al atom adsorbed on graphene.     

Acetone Adsorption on Pristine and Pt-doped Graphene:A First-Principles vdW-DF Study

Using van der Waals corrected density functional theory(vdW-DF) method we have investigated the adsorption of acetone molecule on pristine and Pt-doped graphene.Several active sites for both the interacting systems have been considered in the adsorption process including full geometry optimization.We have analyzed the structural and electrical properties of energetically favorable configurations.The results show that adsorption of acetone molecule on the Pt-doped graphene is energetically preferable.The binding energy and bonding distance are determined to be-5.277 eV and 2.206 A,respectively,accompanying with charge transfer of 1.11 e.Furthermore,the Pt-0 bond is rather significantly elongated when acetone is adsorbed on Pt-doped graphene.Compared to pristine graphene,the Pt-doped graphene has stronger interaction with the acetone and may provide more sensitive signai for a single acetone molecule.Meanwhile,practically,the band gap of Pt-doped graphene would become reduced after acetone adsorption.Consequently,our first-principles study presents evidence for a coherent benchmark for the applicability of Pt-doped graphene for acetone adsorption and detection.     

Acetone Adsorption on Pristine and Pt-doped Graphene: A First-Principles vdW-DF Study

Using van der Waals corrected density functional theory (vdW-DF) method we have investigated the adsorption of acetone molecule on pristine and Pt-doped graphene. Several active sites for both the interacting systems have been considered in the adsorption process including full geometry optimization. We have analyzed the structural and electrical properties of energetically favorable configurations. The results show that adsorption of acetone molecule on the Pt-doped graphene is energetically preferable. The binding energy and bonding distance are determined to be -5.277 eV and 2.206 Å, respectively, accompanying with charge transfer of 1.11 e. Furthermore, the Pt-O bond is rather significantly elongated when acetone is adsorbed on Pt-doped graphene. Compared to pristine graphene, the Pt-doped graphene has stronger interaction with the acetone and may provide more sensitive signal for a single acetone molecule. Meanwhile, practically, the band gap of Pt-doped graphene would become reduced after acetone adsorption. Consequently, our first-principles study presents evidence for a coherent benchmark for the applicability of Pt-doped graphene for acetone adsorption and detection.     

Rb吸附石墨烯纳米带电子性质和光学性质的研究

本文基于密度泛函理论的第一性原理方法了计算了Rb、O和H吸附石墨烯纳米带的差分电荷密度、能带结构、分波态密度和介电函数,调制了石墨烯纳米带的电子性质和光学性质,给出了不同杂质影响材料光学特性的规律.结果表明本征石墨烯纳米带为n型直接带隙半导体且带隙值为0.639 eV;Rb原子吸附石墨烯纳米带之后变为n型简并直接带隙半导体,带隙值为0.494eV;Rb和O吸附石墨烯纳米带变为p型简并直接带隙半导体,带隙值增加为0.996eV;增加H吸附石墨烯纳米带后,半导体类型变为n型直接带隙半导体,且带隙变为0.299eV,带隙值相对减小,更有利于半导体发光器件制备.吸附Rb、O和H原子后,石墨烯纳米带中电荷密度发生转移,导致C、Rb、O和H之间成键作用显著.吸附Rb之后,在费米能级附近由C-2p、Rb-5s贡献;增加O原子吸附之后,O-2p在费米能级附近贡献非常活跃,杂化效应使费米能级分裂出一条能带;再增加H原子吸附之后,Rb-4p贡献发生蓝移,O-2p在费米能级附近贡献非常强,费米能级分裂出两条能带.Rb、O和H的吸附后,明显调制了石墨烯纳米带的光学性质.