Laboratory investigation of biodegradability of a polyurethane foam under anaerobic conditions

Polyurethane (PU) foams can be used in many remediation applications as an isolation material to prevent the release of hazardous materials into the environment. The integrity of a PU foam was investigated in this study using short-term accelerated laboratory experiments including bioavailability assays, soil burial experiments, and accelerated bioreactors to determine the fate of PU foam in the soil where anaerobic processes are dominant. The experimental results have shown that the studied PU foam is likely not biodegradable under anaerobic conditions. Neither weight loss nor a change in the tensile strength of the PU material after biological exposure was observed. The FT-IR chemical signature of the PU foams was also nearly identical before and after biological exposure. The composition of the PU material (aromatic polyester and polyether PU) used in this study could have played a significant role in its resistance to microbial attack during the short-term accelerated experiments.     

Catalytic activity of gold nanoclusters in intramolecular hydroamination of alkenes and alkynes with toluenesulfonamide under aerobic and basic conditions

Gold nanoclusters stabilized by a hydrophilic polymer, poly(N-vinyl-2-pyrrolidone) (Au:PVP), catalyzed the intramolecular hydroamination of toluenesulfonamides to unactivated alkenes/alkynes in EtOH under aerobic and basic conditions. The reaction proceeds via anti-addition of toluenesulfonamide to the alkenes assisted by π-activation of the gold clusters.     

Electrochemical studies on the corrosion of brass in seawater under anaerobic conditions

This paper reports an electrochemical study on the corrosion of brass in deoxygenated nonbuffered and buffered natural and artificial seawater solutions under anaerobic conditions. Cyclic voltammograms of brass and copper in natural seawater (NSW) and artificial seawater (ASW) were obtained in the passive and transpassive potential regions. The corrosion resistance of brass in natural and artificial seawater was evaluated, and open-circuit potentials were recorded over exposure period of 1 week. Brass samples from 3-month exposures in deoxygenated nonbuffered ASW and NSW, under open-circuit potential, have been imaged by scanning electron microscopy, and the elemental composition of the corrosion products was obtained by energy dispersive spectrometry analysis. It has been concluded that, under anaerobic conditions, the aggressivity of NSW is higher, with brass being less resistant to corrosion than copper, and that buffer contributes to reduce the aggressivity of both media.     

Cu-catalyzed decarboxylative iodination of aryl carboxylic acids with NaI: A practical entry to aryl iodides under aerobic conditions

A simple and practical Cu-catalyzed decarboxylative iodination has been well established under aerobic condition, which provides a useful method to synthesize aryl iodides in moderate to good yields with the use of (hetero)aryl carboxylic acids and NaI as starting materials. Thiabendazole has been prepared via a three-step procedure to show synthetic practicability of the protocol.     

Determination of imazethapyr and imazapyr residues in soil by coupled-column liquid chromatography

Summary A column-switching method using two separation columns combined with UV detection at 260 or 236 nm has been used to determine the imidazolinone herbicides imazethapyr and imazapyr in soils. The residues were extracted from the soil with 0.1 M aqueous sodium carbonate solution and, after adjusting the pH to 2.0, the solution was partitioned with dichloromethane. Limits of determination for imazethapyr and imazapyr were 3 μg/kg. Recoveries were from 55 to 75% for both imidazolinone herbicides in the range 3–100 μg/kg in soil.     

Degradation of a tetramethylarsonium salt by microorganisms occurring in sediments and suspended substances under both aerobic and anaerobic conditions

Microbial degradation of a tetramethylarsonium salt during incubation at 25°C was investigated under both aerobic and anaerobic conditions. Two media (1/5 ZoBell 2216E and inorganic salt medium), added with the sediments or suspended substances as the sources of the microorganisms, were used. Degradation of the tetramethylarsonium salt occurred only in the ZoBell medium: under anaerobic conditions, trimethylarsine oxide and dimethylarsinic acid were derived with the sediments, and dimethylarsinic acid with the suspended substances, the salt degrading more rapidly with the former than with the latter. Small amounts of two metabolites, trimethylarsine oxide and inorganic arsenic(V), was also derived in the aerobically incubated ZoBell medium added with the suspended substances. This result means that the tetramethylarsonium salt is degraded to inorganic arsenic, which is the starting material for arsenic circulation in marine ecosystems, via trimethylarsine oxide and dimethylarsinic acid.     

Na-promoted aerobic oxidation of alcohols to ketones

Aerobic oxidation of a number of diaryl and arylalkyl carbinols to ketones was promoted by Na in THF at room temperature with up to 99% yield. This new oxidation method is also selective with good efficiency for the oxidation of benzylic secondary alcohols but not for a primary alcohol or nonbenzylic secondary alcohols. Under nitrogen, a catalytic amount of Ni or transition metal halides such as CoCl₃, FeCl₃, and NiCl₃ in combination with Na was also found to conduct a dehydrogenation of a secondary alcohol to the corresponding ketone in high yield at room temperature.     

Ag/Cu-mediated decarboxylative cyanation of aryl carboxylic acids with K4Fe(CN)6 under aerobic conditions

A method for facile synthesis of aryl nitriles has been well established via Ag/Cu-mediated decarboxylative cyanation of benzoic acids with K₄Fe(CN)₆ under aerobic conditions. The approach of using readily accessible aryl carboxylic acids and green K₄Fe(CN)₆ as starting material provides a feasible alternative to previous cyanation protocols. Control experiments revealed the key role of Cu for the process and excluded the possibility of a radical mechanism for the transformation.     

Resolution of methyl nonactate by Rhodococcus erythropolis under aerobic and anaerobic conditions

[reaction: see text]. An efficient resolution of methyl nonactate is reported by biotransformation in shake flask cultures of Rhodococcus erythropolis. The equilibrium of the reaction redox system can be manipulated by switching from aerobic to anaerobic growth, thereby generating both enantiomers of the target in excellent yield and enantiomeric purity.     

Radiation-induced DNA double-strand breaks in dependence on protein concentration and under aerobic and anaerobic conditions

Double-stranded DNA alone and with serum albumin in eight different weight ratios were irradiated with X-rays in phosphate buffer in air-free and aerated media. Double-strand breaks (dsb) were determined by electrophoresis. The oxygen enhancement ratio for dsb increased with increasing protein concentration from 0.8 to 3.0, presumably caused by the reaction of protein peroxyl radicals. In air-free media, serum albumin protects against radiation-induced double-strand breaking more effectively than in the presence of air, because a part of DNA radicals does not form dsb, but DNA–protein crosslinks.     

温和条件下钒催化氧化胺、醇和胺直接合成亚胺(英文)

开发了钒催化氧化胺、醇和胺直接合成亚胺催化体系,无须额外的添加剂或促进剂,空气作为环境友好的氧源,温和条件下,能高收率地得到各种对称和非对称亚胺,并且催化剂非常容易制备和使用.该催化体系对含杂原子亚胺的合成也非常有效.     

Aerobic and anaerobic biodegradability of polymer films and physico-chemical characterization

Aerobic and anaerobic biodegradation of four different kinds of polymers, polylactic acid, polycaprolactone, a starch/polycaprolactone blend (Mater-bi^®) and poly(butadiene adipate-co-terephthalate) (Eastar bio^®) has been studied in the solid state under aerobic conditions and in the liquid phase under both aerobic and anaerobic conditions.Several standard test methods (ISO 14851, ISO 14853, ASTM G 21-90 and ASTM G 22-76 and NF X 41-514) were used to determine the biodegradability. To determine the efficiency of the biodegradation of polymers, quantitative (mass variations, oxygen uptake, pressure variations, biogas generation and composition, biodegradation percentages) and qualitative (variation of T_g and T_f, variation of molar mass by SEC, characterization by FTIR and NMR spectroscopy) analyses were made and materials were characterized before and after 28 days of degradation.After 28 days, the degradation of materials depends on the material and on the test conditions used. The degradation is better under aerobic conditions, in particular for Mater-bi and polycaprolactone. Nevertheless, we can notice that it is the amorphous part of the polymer which is more attacked by the micro-organisms but, after 28 days, they do not seem to cleave macromolecules inside the material: bacteria attack the surface of the polymer and seem to consume the macromolecules one after another (there is no significant variation in the molar mass and no difference between FTIR and NMR spectra before degradation and after 28 days of degradation).     

Hollow-fiber liquid-phase microextraction for the determination of pesticides and metabolites in soils and water samples using HPLC and fluorescence detection

A new and simple method has been developed for the determination of a group of four benzimidazole pesticides (carbendazim/benomyl, thiabendazole, and fuberidazole), a carbamate (carbaryl), and an organophosphate (triazophos), together with two of their main metabolites (2-aminobenzimidazole, metabolite of carbendazim/benomyl, and 1-naphthol, metabolite of carbaryl) in soils. First, an ultrasound-assisted extraction (UAE) was performed, followed by evaporation and reconstitution in water. Then, extraction and preconcentration of the analytes was accomplished by two-phase hollow-fiber liquid-phase microextraction (HF-LPME) using 1-octanol as extraction solvent. Parameters that affect the extraction efficiency in HF-LPME technique (organic solvent, pH of the sample, extraction time, stirring speed, temperature, and ionic strength) were deeply investigated. Optimum HF-LPME conditions involved the use of a 2.0 cm polypropylene fiber filled with 1-octanol to extract 10 mL of an aqueous soil extract at pH 9.0 containing 20% (v/v) of NaCl for 30 min at 1440 rpm. Separation and quantification was achieved by HPLC with fluorescence detection (FD). The proposed optimum UAE-HF-LPME-HPLC-FD methodology provided good calibration, precision, and accuracy results for two soils of different physicochemical properties. LODs were in the range 0.001-6.94 ng/g (S/N = 3). With the aim of extending the validation, the HF-LPME method was also applied to different types of waters (Milli-Q, mineral and run-off), obtaining LODs in the range 0.0002-0.57 μg/L.     

Selective copper(II)-catalyzed aerobic oxidative cleavage of aromatic gem-disubstituted alkenes to carbonyl compounds under neutral and mild conditions

Three copper(II) catalytic systems, CuCl₂·2H₂O, CuCl₂·2H₂O+phenanthroline, and [Cu(μ-Cl)Cl(phen)]₂ were used to cleave alkenes to their corresponding carbonyl compounds under aerobic and neutral conditions. [Cu(μ-Cl)Cl(phen)]₂ shows enhanced selectivity over the other two catalytic systems. The oxidative cleavage reactions were carried out in mixed H₂O/THF solvent system under oxygen (4 atm) at 60°C. The real oxidant is 2-hydroperoxytetrahydrofuran, which is generated in situ in the process through the reaction between THF and oxygen catalyzed by copper(II). The cleavage reactions are selective for aromatic gem-disubstituted alkenes. Aromatic internal alkenes are slow to be oxidized, and both aliphatic terminal and internal alkenes are inert to oxidative cleavage. Free radical scavenger 2,2,6,6, tetramethylpiperidinyl-1-oxyl (TEMPO) deactivates the reaction indicating the involvement of free radical path in the reaction mechanism.     

Thermal and photochemical reactions of allylcobaloximes with para-substituted benzenesulphonyl chloride under aerobic and anaerobic conditions

The compounds p-XC₆H₄SO₂Cl (X = Cl, Br, I, OMe) react regiospecifically with allyl-, 2-methylallyl-, 3-methylallyl- and 3,3-dimethylallyl-cobaloximes under thermal and photochernical conditions. A rearranged organic product is obtained in each case. The yields are much better in photochemical reactions. A chain mechanism is involved in which the organosulphonyl radical and cobaloxime(II) are the chain propagating species. Yields of the sulphones are drastically reduced when the reactions are carried out in the presence of oxygen.     

Loss of stability by migration and chemical reaction of Santonox R in branched polyethylene under anaerobic and aerobic conditions

Plaques of branched polyethylene stabilized with 0.1 wt.% 4,4′-thiobis(6-tert-butyl-3-methylphenol) [Santonox^® R] were aged at different temperatures between 75 and 95 °C in anaerobic (nitrogen or water) and aerobic (air or water saturated with air) media. Antioxidant concentration profiles were obtained by oxidation induction time (OIT) measurements using differential scanning calorimetry. Results obtained by high performance liquid chromatography of extracts confirmed that the gradual decrease in OIT with increasing ageing time was due to migration of antioxidant to the surrounding medium. The antioxidant concentration profiles along the plaque thickness direction were flat in the plaques aged in the non-aqueous media indicating that the migration of antioxidant to the surrounding medium was controlled by the low evaporation rate at the material boundary. Crystals of antioxidant were detected by optical microscopy on the samples exposed to nitrogen. The similarity of the antioxidant concentration profiles obtained after ageing in nitrogen and in air suggested that the fraction of the antioxidant oxidized is negligible in comparison with the loss of antioxidant by migration to the surrounding media. The antioxidant concentration profiles along the plaque thickness direction obtained after ageing in water were less flat, suggesting faster dissolution in the water phase than evaporation in the case of non-aqueous ageing. The antioxidant diffusivity could be determined from the aqueous experiments and was in reasonable agreement with data reported by Moisan. For the samples exposed to water, the loss of antioxidant was faster from the samples exposed to water saturated with air. This difference is attributed to a faster degradation of the antioxidant in the oxygen-containing water phase increasing the mass transport from the polymer phase boundary to the water phase.     

Carbon dioxide production in the oxidation of organic acids by Cerium(IV) under aerobic and anaerobic conditions

The stoichiometry of CO₂ production during the ceric oxidation of various organic acids is measured under conditions with organic acid excess. Measurements utilize a photometric methodology. For anaerobic conditions stoichiometries [CO₂]_produced:[Ce(IV)]_reduced of about 0 (malonic acid), 0.5 (e.g., glyoxylic acid), and 1.0 (oxalic acid) are found. Oxalic acid showed an oxygen-induced decrease of CO₂ production, while other compounds such as malonic acid increased the amount of produced CO₂ or showed no changes (e.g., tartronic acid). In the case of mesoxalic acid the stoichiometry is increased from about 0.5 to 2.0 due to the presence of molecular oxygen. The results are discussed on the basis of simple reaction mechanisms demonstrating that useful information on reaction pathways and intermediates can be extracted from these simple measurements. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 899–902, 1998     

Recyclable gold nanoparticle catalyst for the aerobic alcohol oxidation and C-C bond forming reaction between primary alcohols and ketones under ambient conditions

A recyclable gold catalyst is synthesized from readily available reagents by immobilizing gold nanoparticles in aluminum oxyhydroxide support through a simple sol-gel method. The catalyst showed the high activity even at room temperature in the aerobic oxidation of various alcohols and in the coupling reaction between primary alcohols and ketones.     

Ionic liquid-dispersive liquid-liquid microextraction for the simultaneous determination of pesticides and metabolites in soils using high-performance liquid chromatography and fluorescence detection

In this work, an ionic liquid-dispersive liquid-liquid microextraction (IL-DLLME) procedure was developed for the extraction of a group of pesticides (carbendazim/benomyl, thiabendazole, fuberidazole, carbaryl and triazophos) and some of their key metabolites in soils (2-aminobenzimidazole, metabolite of carbendazim and 1-naphthol, metabolite of carbaryl) from aqueous soil extracts, using high performance liquid chromatography (HPLC) with fluorescence detection (FD). Analytes were previously extracted from four soils with different physicochemical properties (forestal, ornamental, garden and lapilli soils) by ultrasound-assisted extraction (USE). The IL 1-hexyl-3-methylimidazolium hexafluorophosphate ([HMIm][PF(6)]) and methanol (MeOH) were used as extraction and dispersion solvent, respectively, for the DLLME procedure. Factors affecting IL-DLLME (sample pH, IL amount, volume of dispersion solvent and sodium chloride percentage) were optimized by means of an experimental design, obtaining the most favorable results when using 117.5 mg of IL and 418 μL of MeOH to extract the compounds from the aqueous soil extracts at pH 5.20 containing 30% (w/v) NaCl. Calibration of the USE-IL-DLLME-HPLC-FD method was carried out for every type of soil and accuracy and precision studies were developed at two levels of concentration, finding that no significant differences existed between real and spiked concentrations (Student's t test). LODs achieved were in the low ng/g range.     

Efficient, recoverable, copper-catalyzed aerobic oxidation of alcohols under FBS and thermomorphic mode

A series of fluorinated bipyridine derivatives, (4,4′-bis(R_fCH₂OCH₂)-2,2′-bpy) {R_f = n-C₈F₁₇ (1a), n-C₉F₁₉ (1b), n-C₁₀F₂₁ (1c), n-C₁₁F₂₃ (1d)} have been successfully synthesized using 4,4′-bis(bromomethylene)-2,2′-bpy and fluorinated alkoxides. Bpy 1a-d have been characterized by multi-nuclei (¹H, ¹⁹F, and ¹³C) NMR, GC/MS and FTIR. The Cu complexes 2a-d could be generated in situ by stirring ligands 1a-d with CuBr·Me₂S at room temperature, respectively. The 3-component systems 3c-d, CuBr·Me₂S/Bpy (1c-d)/2,2,6,6-Tetramethylpiperidine 1-oxyl (TEMPO), were successfully used to the aerobic oxidation of alcohols under the fluorous biphasic system (FBS). The resulting products from FBS could be easily recovered by two phase separation with high yields up to 8 runs (>90%). In order to avoid using the expensive fluorous solvents, systems 3a-d, CuBr·Me₂S/Bpy (1a-d)/TEMPO, were also successfully shown to catalyze the aerobic alcohol oxidation under the thermomorphic condition (in C₆H₅Cl), and the yields of oxidation of 4-nitrobenzyl alcohol were close to 100% even after 8 runs. In particular, 3a was most effective under the thermomorphic mode in the chemoselectivity of aerobic oxidation of aliphatic primary alcohols to aldehydes without any overoxidized acids.