Hydrophobic interaction chromatography of proteins. I. The effects of protein and adsorbent properties on retention and recovery

The contributions of protein and adsorbent properties to retention and recovery were examined for hydrophobic interaction chromatography (HIC) using eight commercially available phenyl media and five model proteins (ribonuclease A, lysozyme, alpha-lactalbumin, ovalbumin and BSA). The physical properties of the adsorbents were determined by inverse size exclusion chromatography (ISEC). The adsorbents examined differ from each other in terms of base matrix, ligand density, porosity, mean pore radius, pore size distribution (PSD) and phase ratio, allowing systematic studies to understand how these properties affect protein retention and recovery in HIC media. The proteins differ in such properties as adiabatic compressibility and molecular mass. The retention factors of the proteins in the media were determined by isocratic elution. The results show a very clear trend in that proteins with high adiabatic compressibility (higher flexibility) were more strongly retained. For proteins with similar adiabatic compressibilities, those with higher molecular mass showed stronger retention in Sepharose media, but this trend was not observed in adsorbents with polymethacrylate and polystyrene divinylbenzene base matrices. This observation could be related to protein recovery, which was sensitive to protein flexibility, molecular size, and conformation as well as the ligand densities and base matrices of the adsorbents. Low protein recovery during isocratic elution could affect the interpretation of protein selectivity results in HIC media. The retention data were fitted to a previously published retention model based on the preferential interaction theory, in terms of which retention is driven by release of water molecules and ions upon protein-adsorbent interaction. The calculated number of water molecules released was found to be statistically independent of protein retention strength and adsorbent and protein properties.     

van der Waals interaction between internal aqueous droplets and the external aqueous phase in double emulsions

A mathematical model for analyzing the van der Waals interaction between the internal aqueous droplets (W(1)) and the external aqueous phase (W(2)) of double emulsions has been established. The effects of Hamaker constants of the materials forming the system, especially those of the two different adsorbed surfactant layers with uniform density (A(1) and A(2)), on the van der Waals interaction were investigated. The overall van der Waals interaction across the oil film is a combined result of four individual parts, that is, W(1)-W(2), A(1)-A(2), W(1)-A(1), and A(2)-W(2) van der Waals interaction, and it may be either attractive or repulsive depending on many factors. It was found that the overall van der Waals interaction is dominated by the W(1)-W(2) interaction at large separation distances between the W(1)/O and O/W(2) interfaces, while it is mostly determined by the A(1)-A(2) interaction when the two interfaces are extremely close. Specifically, in the cases when the value of the Hamaker constant of the oil phase is intermediate between those of W(1) and W(2) and there is a thick oil film separating the two interfaces, a weak repulsive overall van der Waals interaction will prevail. If the Hamaker constant of the oil phase is intermediate between those of A(1) and A(2) and the two interfaces are very close, the overall van der Waals interaction will be dominated by the strong repulsive A(1)-A(2) interaction. The repulsive van der Waals interaction at such cases helps stabilize the double emulsions.     

On possible microscopic origins of the swelling of neutral lipid bilayers induced by simple salts

It was recently suggested that the swelling of neutral multilipid bilayers upon addition of a salt can be simply explained only by the electrolyte screening of the van der Waals attractions, while assuming that the hydration force and the repulsion due to thermal undulations of membranes are unaffected by the salt. While we agree that the screening of the van der Waals interactions plays a role, we suggest that the increase in the hydration force upon addition of a salt has also to be taken into account. In a statistical model, which accounts for the membrane undulations, parameters could be found to explain the multibilayer swelling even when the van der Waals attraction is considered unaffected by the electrolyte screening. These results point out that the decrease by a factor of three of the Hamaker constant upon addition of a salt, suggested recently to be responsible for the swelling of neutral multilipid bilayers, is perhaps too large, and a smaller decrease in Hamaker constant, coupled with the above mentioned effects might explain the swelling.     

DLVO interactions of tungsten oxide and cobalt oxide surfaces measured with the colloidal probe technique

We have investigated the DLVO surface forces of oxidized tungsten and cobalt surfaces using the atomic force microscope (AFM) colloidal probe technique. It was shown by X-ray photoelectron spectroscopy (XPS) and electrokinetic measurements that this model system is representative of industrial tungsten carbide (WC) and cobalt powders used in the production of hard metals. We found that the attractive van der Waals forces are well described by Hamaker constants, calculated from optical data for WO(3) and CoOOH. The repulsive electrostatic double layer forces between WO(3) surfaces increase with increasing pH due to an increasingly negative surface potential. This surface potential decreases with increasing ionic strength at pH 7.5. The electrostatic interaction between WO(3) and CoOOH is attractive at pH 10, suggesting a positively charged CoOOH surface.     

Estimation of the Hamaker constants by sedimentation field-flow fractionation

van der Waals forces are one of several forces that control the adhesion between two materials. These forces are important to quantify in adhesion studies because they are always present and are always attractive. The major problem in calculating the van der Waals interaction between colloidal particles is that of evaluating the Hamaker constant. Hence, an accurately determined Hamaker constant for a given material is needed when interfacial phenomena such as adhesion are discussed in terms of the total potential energy between a particle and a substrate. In this paper, a new simple and accurate methodology for the estimation of the Hamaker constant is introduced. The results are in good agreement with those values found in literature.     

A theoretical approach for estimation of ultimate size of bimetallic nanocomposites synthesized in microemulsion systems

In this research a new idea for prediction of ultimate sizes of bimetallic nanocomposites synthesized in water-in-oil microemulsion system is proposed. In this method, by modifying Tabor Winterton approximation equation, an effective Hamaker constant was introduced. This effective Hamaker constant was applied in the van der Waals attractive interaction energy. The obtained effective van der Waals interaction energy was used as attractive contribution in the total interaction energy. The modified interaction energy was applied successfully to predict some bimetallic nanoparticles, at different mass fraction, synthesized in microemulsion system of dioctyl sodium sulfosuccinate (AOT)/isooctane.     

Energetics of protein adsorption on amine-functionalized mesostructured cellular foam silica

The energetics of lysozyme adsorption on aminopropyl-grafted MCF silica (MCF-NH2) are compared to the trends observed during lysozyme adsorption on native MCF silica using flow microcalorimetry (FMC). Surface modification on MCF silica affects adsorption energetics significantly. All thermograms consist of two initial exothermic peaks and one later endothermic peak, but the heat signal trends of MCF-NH2 are opposite from those observed for adsorption onto native MCF silica in salt solutions of sodium acetate and sodium sulfate. At low ionic strength (0.01 M), LYS adsorption onto MCF-NH2 was accompanied by a large exotherm followed by a desorption endotherm. With increasing ionic strength (0.1 and 3.01 M), the magnitude of the thermal signal decreased and the total process became less exothermic. Also a higher protein loading of 14 μmol g(-1) was obtained at low ionic strength in batch adsorption isotherm measurements. Taken together, the FMC thermograms and batch adsorption isotherms reveal that MCF-NH2 has the nature of an ion exchange adsorbent, even though lysozyme and the aminopropyl ligands have like net charges at the adsorption pH. Reduced electrostatic interaction, reduced Debye length, and increased adsorption-site competition attenuate exothermicity at higher ionic strengths. Thermograms from flow microcalorimetry (FMC) give rich insight into the mechanisms of protein adsorption. A two-step adsorption mechanism is proposed in which negatively charged surface amino acid side chains on the lysozyme surface make an initial attachment to surface aminopropyl ligands by electrostatic interaction (low ionic strength) or van der Waals interaction (high ionic strength). Secondary attachments take place between protruding amino acid side chains and silanol groups on the silica surface. The reduced secondary adsorption heat is attributed to the inhibitory effect of the enhanced steric barrier of aminopropyl group on MCF silica.     

Dielectrophoretic force on a sphere near a planar boundary

The small gap distance separating a spherical colloidal particle in electrophoretic motion from a planar nonconducting surface is a required parameter for calculating its electrophoretic mobility. In the presence of an externally applied electric field, this gap distance is determined by balancing the van der Waals, electrical double layer interaction, and gravitational forces with a dielectrophoretic (DEP) force. Here, the DEP force was determined analytically by integration of the Maxwell stress over the surface of the particle. The account of this force showed that its previous omission from the analysis always resulted in underpredicted gap distances. Furthermore, the DEP force dominated under conditions of low particle density or high electric field strength and led to much higher gap distances on the order of a few microns. In one particular case, a combination of low particle density and small particle size produced two possible equilibrium gap distances for the particle. However, the particle was unstable in the second equilibrium position when subjected to small perturbations. In general, larger particles had smaller gap sizes. The effects of four other parameters on gap distance were studied, and gap distances were found to increase with lower particle density, higher electric field strength, higher particle and wall zeta potentials, and lower Hamaker constants. Retardation effects on van der Waals attraction were considered.     

Biomimetic particles: optimization of phospholipid bilayer coverage on silica and colloid stabilization

The effect of ionic strength and pH on phosphatidylcholine (PC) adsorption from vesicles on silica nanoparticles was investigated over a range of NaCl concentrations (0.1-150 mM) at pH 6.3 and 7.4 from determination of adsorption isotherms, colloid stability, particle sizing, and zeta-potentials. At and above 10 mM ionic strength, pH 6.3, high-affinity adsorption isotherms with limiting adsorption indicative of one-bilayer deposition on each silica particle were obtained. At 10 mM ionic strength, adsorption isotherms indicated lower affinity between PC and silica at pH 7.4 than at pH 6.3, suggesting a role of hydrogen bonding between silanol on silica and phosphate on PC in promoting bilayer deposition at low pH. Under conditions where high affinity and bilayer deposition were achieved, silica sedimentation documented from photographs was absent, suggesting particle stabilization induced by bilayer coverage. However, at physiological (150 mM NaCl) or close to physiological ionic strength (140 mM NaCl), the large colloid stability similarly achieved at pH 6.3 or 7.4 suggested the major role of van der Waals attraction between the PC bilayer vesicle and silica particle in determining bilayer deposition. The effect of increasing ionic strength was increasing van der Waals attraction, which caused PC vesicle disruption with bilayer deposition and bilayer-induced silica stabilization.     

溶致液晶中金属纳米粒子的掺杂及其作用机制研究

在用琥珀酸二异辛酯磺酸钠(AOT)构建的具有长程有序结构的层状溶致液晶内, 用不同方式导入预制的亲油或亲水贵金属纳米粒子, 可得到纳米粒子分布在不同介观空间内的无机/有机杂合体. 依据小角X射线散射和偏光显微镜结果, 通过分析掺杂纳米粒子与液晶模板的相互作用, 对掺杂前后体系结构的变化及制得杂合体的稳定性进行了表征. 结果表明, 除考虑掺杂粒子与层状模板空间的匹配外, 体系中静电斥力、范德华引力和Helfrich涨落力之间的平衡是维持液晶结构稳定的基本条件.     

Hydrophobic interaction chromatography of proteins III. Transport and kinetic parameters in isocratic elution

The effective pore diffusivities, D(e), of five model proteins (ribonuclease A, lysozyme, alpha-lactalbumin, ovalbumin, and BSA) in eight commercial phenyl hydrophobic interaction chromatography (HIC) media were determined by analyzing the plate height data from isocratic elution using the first two moments of the general linear rate model. The adsorbents represent a diverse set of HIC media that are widely used for protein purification. The estimated pore diffusivities were used to calculate the elution profiles of proteins in these adsorbents and were compared with the elution profiles obtained experimentally. High protein loading and sample protein concentration led to the underestimation of the pore diffusivity by the linear rate model. Comparisons between the calculated and the experimental profiles suggest that the pore diffusivities obtained from the linear rate model are generally accurate for proteins with low structural flexibility but not for more flexible ones, presumably because conformational change effects contribute significantly to the overall HETP. The general linear rate model was modified to account for the protein folding/unfolding kinetics, and parameter values could be estimated by fitting the experimental elution profiles to the modified model. In addition to conformational change, adsorbent type also had a significant effect on the accuracies of the pore diffusivities estimated by the linear rate model. The results also show that pore diffusion was the rate-limiting step in all absorbents for rigid proteins such as ribonuclease A and lysozyme. For structurally flexible proteins, conformational change contributed significantly to the overall reduced plate heights of the isocratic elution peaks. The physical properties of adsorbents, such as protein accessible porosity, pore size distribution, pore radius and pore connectivity, play important roles in determining the effective protein pore diffusivities.     

咪唑类离子液体与酪氨酸相互作用及机理的密度泛函理论研究

Ionic liquids (ILs) are thermally and chemically stable and have adjustable structures, which gives them the potential to be used as green, efficient biomolecular solvents. Given the critical role of ILs in dissolving biomolecules, the mechanism of interaction between them deserves further study. Herein, density functional theory (DFT) calculations, using the SMD implicit water solvent model, were employed to study the interaction and mechanism between a hydrophobic zwitterionic amino acid (Tyr) and a series of imidazolium ILs with different alkyl chain lengths and methylation sites. The contributions of hydrogen bonding (H-bonding), electrostatic effects, induction, and dispersion to the intermolecular interactions were determined by combining the symmetry-adapted perturbation theory (SAPT), the atoms in molecules (AIM) theory, and reduced density gradient (RDG) analysis. The results indicate that the H-bonding between the IL cation and Tyr is stronger than that between the IL anion and Tyr; however, the binding between either ion and Tyr is dominated by electrostatic effects. By contrast, the difference between the induction and dispersion forces is small when methylation occurs on the C2 site of the imidazolium cation; whereas, it is significantly large when methylation takes place on the N3 site. This is rationalized by the interaction patterns that vary based on the methylation site. H-bonding and π⁺-π stacking interactions between the imidazole and benzene rings are dominant during C2-methylation, while H-bonding and C_Alkyl-H…π interactions between the alkyl chain and benzene ring are dominant during N3-methylation. Increasing the side alkyl chain length has different effects on the interaction energy to cations with different methylation sites. During N3-methylation, when the side alkyl chain length increases from 4 to 12, there are significant van der Waals interactions between the Tyr benzene and the side alkyl chain. However, these van der Waals interactions are inapparent when methylation takes place on the C2 site. Finally, the synergetic effect of the H-bonding and the interaction between the benzene and the side alkyl chain for C2-methylation is greater than the H-bonding and the interaction between the imidazole and benzene rings for N3-methylation, when the side alkyl chain length n > 9. Therefore, the interaction strength and mechanism in these imidazolium-Tyr complexes can be regulated by changing the methylation site and the side alkyl chain length of the cation. Further study of ion-pair and Tyr reveals that the change tendency of the interaction energy of IL-Tyr systems is consistent with that of cation-Tyr cases, and the ion pair further stabilizes the binding with Tyr. These results illustrate the interaction mechanism of IL-Tyr systems and provide a novel strategy for the design and screening of functional ILs for amino acid extraction and separation in the future.     

Colloidal interactions between monoclonal antibodies in aqueous solutions

Colloidal interactions between proteins determine the behavior and stability of globular proteins such as monoclonal antibodies (mAbs) against their propensity to cluster formation in solution. We study interactions between these proteins through their dilute solution behavior. Experiments to quantify intermolecular interactions were done using Dynamic and Static Light Scattering (DLS and SLS) in a high-throughput manner in parallel with zeta potential measurements with Laser Doppler Electrophoresis method (M3-PALS). This approach offers a rapid indirect determination of colloidal interactions through their measured second virial coefficient. Electrostatic part of the DLVO interaction was conveniently parameterized via the corresponding surface charge and/or surface potential, while the van der Waals interactions were parameterized via their Hamaker coefficient, both as functions of ionic strength and pH of the bathing solution. This parametrization of protein-protein interactions improves our understanding of mAb assembly and provides a means for its control by solution parameter variation. Additionally, our results also provide a consistency check and validation of applicability of the DLVO theory in mAbs solution assembly processes.     

Adsorption of water-soluble polyelectrolytes of varied nature on mineral adsorbents

The adsorption behavior of water-soluble polyelectrolytes on mineral and synthetic adsorbents was analyzed. The effect of ionic strength, pH value, and hydrophobic interaction on the adsorption transfer of macrochains to the solid surface, determined by the conformation state of the macrochains and the electrokinetic potential of the adsorbent, was studied for model and industrial polyelectrolytes and adsorbents of varied acid-base nature.     

Ultrasound-assisted preparation and characterization of crystalline cellulose-ionic liquid blend polymeric material: a prelude to the study of its application toward the effective adsorption of chromium

The molecular interaction of biopolymers with an array of substrates offers interesting insight into the adsorption phenomenon. The present work proposes the preparation and characterization of cellulose-methyltrioctylammonium chloride (MeTOACl)-a room temperature ionic liquid (IL) blend polymeric sorbent and its application for the adsorption of carcinogenic chromium(VI). The blend adsorbent material was synthesized in a relatively green solvent (methylisobutylketone) medium by ultrasonication. The mechanism of interaction of biopolymer with the ionic liquid could be conceptualized as electrostatic attraction, hydrogen bonding, and Van der Waals force of attraction with the hydroxyl groups of cellulose as a bilayer assembly. The composition, crystallinity, and the surface area of the prepared material were comprehensively characterized using FT-IR, solid-state (13)C NMR, TGA, XRD, SEM, EDX, XPS, and BET isotherm study. The adsorption capacity of chromium(VI) calculated from Langmuir isotherm model was found to be 38.94 mg g(-1) with adherence to the second-order kinetics. The study of thermodynamic parameters that affect the sorption process indicated the spontaneity and exothermic nature of adsorption. The green aspect in the methodology is brought out in the regeneration of the adsorbent, where Cr(VI) could be effectively reduced to the less toxic Cr(III) using ascorbic acid.     

On the stability of concentrates. Non-aqueous dispersions

It is demonstrated that the depth of the potential well between two colloidal particles which interact via van der Waals interactions can be minimized if they are covered with a shell of adsorbed surfactant molecules whose Hamaker constant is near to that or the liquid medium. This result is used to explain some experimental observations (I. Sushumna, R.P. Gupta and E. Ruckenstein, J. Mater. Res., 7 (1992) 2884) which indicate that long-chain fatty acids with an alkyl side chain of 5–10 carbon atoms located far from the head group of the surfactant lead to lower paste viscosities than those without side chains or with longer side alkyl chains. It is also suggested that, in concentrated suspensions, the collective interactions when the pair interaction is attractive can lead to an effective repulsion component between two neighboring particles, and that this effect may contribute to the stability of the concentrated dispersions.     

EFFECTS OF DMSO ON THE PROPERTIES OF RED BLOOD CELLS I. INTERACTION WITH LANTHANUM IONS AND FLOCCULATION

The binding of lanthanum Ions onto the surfaces of fixed turkey, chicken, horse and dog cells was studied electrophoretl-cally, in the presence and in the absence of dimethyl sulfoxide (DMSO). Charge reversal concentrations and electrochemical free energies of lanthanum ion adsorption were calculated. The surfaces responded differently to lanthanum ion binding with each addition of DMSO. Flocculation studies revealed that rapid flocculation of turkey cells occurred when the zeta potential had dropped to-8.1 mV, at an effective Hamaker coefficient of 13.15 × 10^-23. Even at zero van der Waals attraction, the admixture of lanthanum nitrate could cause flocculation of turkey cells. It is concluded that the cells flocculated by trivalent cation bridging, with little or no contribution of van der Waals-London attraction at the primary minimum.     

Phase behavior of aqueous solutions containing dipolar proteins from second-order perturbation theory

Due to the interplay of Coulombic repulsion and attractive dipolar and van der Waals interactions, solutions of globular proteins display a rich variety of phase behavior featuring fluid-fluid and fluid-solid transitions that strongly depend on solution pH and salt concentration. Using a simple model for charge, dispersion and dipole-related contributions to the interprotein potential, we calculate phase diagrams for protein solutions within the framework of second-order perturbation theory. For each phase, we determine the Helmholtz energy as the sum of a hard-sphere reference term and a perturbation term that reflects both the electrostatic and dispersion interactions. Dipolar effects can induce fluid-fluid phase separation or crystallization even in the absence of any significant dispersion attraction. Because dissolved electrolytes screen the charge-charge repulsion more strongly than the dipolar attraction, the ionic strength dependence of the potential of mean force can feature a minimum at intermediate ionic strengths offering an explanation for the observed nonmonotonic dependence of the phase behavior on salt concentration. Inclusion of correlations between charge-dipole and dipole-dipole interactions is essential for a reliable calculation of phase diagrams for systems containing charged dipolar proteins and colloids.     

Ionic Liquids: Dissecting the Enthalpies of Vaporization

We calculate the heats of vaporisation for imidazolium‐based ionic liquids [C_nmim][NTf₂] with n=1, 2, 4, 6, 8 by means of molecular dynamics (MD) simulations and discuss their behavior with respect to temperature and the alkyl chain length. We use a force field developed recently. The different cohesive energies contributing to the overall heats of vaporisations are discussed in detail. With increasing alkyl chain length, the Coulomb contribution to the heat of vaporisation remains constant at around 80 kJ mol^?1, whereas the van der Waals interaction increases continuously. The calculated increase of about 4.7 kJ mol^?1 per CH₂‐group of the van der Waals contribution in the ionic liquid exactly coincides with the increase in the heats of vaporisation for n‐alcohols and n‐alkanes, respectively. The results support the importance of van der Waals interactions even in systems completely composed of ions.