Coupling asymmetric flow-field flow fractionation and fluorescence parallel factor analysis reveals stratification of dissolved organic matter in a drinking water reservoir

Using asymmetrical flow field-flow fractionation (AF4) and fluorescence parallel factor analysis (PARAFAC), we showed physicochemical properties of chromophoric dissolved organic matter (CDOM) in the Beaver Lake Reservoir (Lowell, AR) were stratified by depth. Sampling was performed at a drinking water intake structure from May to July 2010 at three depths (3-, 10-, and 18-m) below the water surface. AF4-fractograms showed that the CDOM had diffusion coefficient peak maximums between 3.5 and 2.8 × 10⁻⁶ cm² s⁻¹, which corresponded to a molecular weight range of 680–1950 Da and a size of 1.6–2.5 nm. Fluorescence excitation–emission matrices of whole water samples and AF4-generated fractions were decomposed with a PARAFAC model into five principal components. For the whole water samples, the average total maximum fluorescence was highest for the 10-m depth samples and lowest (about 40% less) for 18-m depth samples. While humic-like fluorophores comprised the majority of the total fluorescence at each depth, a protein-like fluorophore was in the least abundance at the 10-m depth, indicating stratification of both total fluorescence and the type of fluorophores. The results present a powerful approach to investigate CDOM properties and can be extended to investigate CDOM reactivity, with particular applications in areas such as disinfection byproduct formation and control and evaluating changes in drinking water source quality driven by climate change.     

Fluorescence spectroscopy of fulvic acids’ interaction with surfactants

Fluorescence spectra of two fulvic acid (FA) samples, FA0 from underground water and FA1 from forest soil, were recorded in various surfactant solutions. Alkyltrimethylammonium ions with different alkyl chain lengths induced a decrease in the fluorescence intensity for both FAs at concentrations below the critical micelle concentration (cmc) and an enhancement above the cmc. The intensity minimum thus obtained at the cmc was deeper for surfactants with longer alkyl chains. This effect was attributable to the formation of insoluble FA–surfactant complexes below the cmc and to the solubilization of the complex into micelles above the cmc. Dodecylpyridinium chloride caused a monotonic decrease in the FA fluorescence even far above the cmc. This was attributable to the quenching of FA fluorescence by the positioning of the pyridinium head group near the FA fluorophore. Anionic and nonionic surfactants showed little to no effect on the FA fluorescence.     

Preconcentration and neutron activation analysis of thorium and uranium in natural waters

Uranium and thorium were analyzed in commercial bottled waters and in fresh waters, such as tap water, by neutron activation analysis. The analysis was applied after a preconcentration step from a batch of 1–3 dm³ water under investigation. The adsorption was performed in the presence of a small amount (about 1 g) of an adsorber derived from the salt of a-hydroxyquinoline and benzilic (diphenylglycolic) acid, adsorbed onto charcoal. The preconcentration method has shown to be rapid and reliable. The overall method was set in order to have an alternative method of comparison with other different methods of analysis. The proposed method may be applied to different fresh water samples. This revised version was published online in July 2006 with corrections to the Cover Date.     

Fluorescent dendritic polymers and nanostructured coatings for the detection of chemical warfare agents and other analytes

Polyamidoamine (PAMAM) dendrimers of generations zero (G0) to four (G4), and a hyperbranched polyurea (HB‐PU), were functionalized with 1,5‐dansyl (1,5‐D), 2,5‐dansyl (2,5‐D), 2,6‐dansyl (2,6‐D) and nitrobenzofurazan (NBD) fluorophores that change their fluorescence emission wavelength in response to chemical environment, and the resulting dendritic polymers were characterized by MALDI‐TOF mass spectrometry, ¹H NMR, ¹³C NMR, and fluorescence spectroscopy. Fluorophore‐functionalized dendritic polymers were then reacted further with 3‐acryloxypropyldimethoxymethylsilane (AOP‐DMOMS) at various fluorophore to DMOMS substitution ratios. The resulting materials were cast onto glass slides, and cured into robust nanostructured coatings. Coatings with 50% fluorophore–50% DMOMS substitution showed the strongest fluorescence and the best physical properties. Coated coupons were tested against a wide range of analytes including the chemical warfare agent simulants dimethyl methylphosphonate (DMMP) and chloroethylethylsulfide (CEES), and the water‐methanol‐ethanol series. It was found that the ability of the coatings to distinguish between analytes decreased with increasing cross‐link density for both dendrimer and hyperbranched polymer‐based coatings. It was also found that the percent fluorophore substitution and the type of dendritic polymer carrying the fluorophore had no significant effect upon fluorescence emission wavelength, but fluorescence emission wavelength became less dependent upon solvent with increasing dendrimer generation and molecular mass. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5101–5115, 2009     

N-allyl-4-(N-2'-hydroxyethyl)amino-1,8-naphthalimide as a fluorophore for optical chemosensing of nitrofurantoin

N-Allyl-4-(N-2'-hydroxyethyl)amino-1,8-naphthalimide (AHEAN), a naphthalimide derivative, was synthesized as a new fluorophore for optical chemical sensor preparation. To prevent leakage of the fluorophore, AHEAN was photo-copolymerized with 2-hydroxypropyl methacrylate on a glass surface treated with a silanizing agent. An optical chemical sensor based on AHEAN can be utilized for nitrofurantoin assay based on fluorescence quenching. The sensor shows sufficient repeatability, selectivity and a fast response of less than 30 s. Nitrofurantoin can be determined in the range between 1.00 x 10(-6) and 1.00 x 10(-3) mol l(-1) with a detection limit of 4.8 x 10(-7) mol l(-1). Most commonly co-existing drug substances and ions do not interfere with the nitrofurantoin assay. The sensor was applied to the analysis of pharmaceutical and urine samples.     

Fluorescence properties of domperidone and its determination in pharmaceutical preparations

The native fluorescence characteristics of domperidone in various solvents and at different pH values are reported. The fluorophore is the benzo-1,3-diazolin-2-one group which is also present in the analogous benperidol, droperidol and pimozide molecules from which domperidone is derived; the substituent may therefore be considered as a relatively strong fluorophore; its excitation and emission maxima are little influenced by pH variation. Domperidone can be determined in pharmaceutical preparations by its native fluorescence in ethanol (λ_ex = 283 nm ;λ_em = 324 nm) and in 0.01 M HCl (λ_ex = 284 nm;λ_em = 329 mn) with a detection limit of 0.01 μg ml^-1.     

Reduction of copper(II) complexes of tridentate ligands by nitric oxide and fluorescent detection of NO in methanol and water media

Two copper complexes, 1 and 2, with tridentate N-donor ligands, L(1) and L(2) [L(1)= (1-methyl-1H-imidazol-2-ylmethyl)-(2-pyridin-2-yl-ethyl)amine, L(2) = (2-pyridin-2-yl-ethyl)-pyridin-2 yl-methylamine] respectively, have been synthesized and characterized. On exposure to nitric oxide, the copper(II) centers in complexes 1 and 2 were found to undergo reduction in various solvents. In acetonitrile solvent the reduction was accompanied by a simultaneous N-nitrosation on the secondary amine center on the ligand frameworks. Complexes 3 and 4 were prepared with ligands L(3) and L(4), respectively. L(3) and L(4) [L(3) = 5-dimethylamino-naphthalene-1-sulfonic acid (1-methyl-1H-imidazol-2-ylmethyl)-(2-pyridin-2-yl-ethyl)-amide; L(4) = 5-dimethylamino-naphthalene-1-sulfonic acid(2-pyridin-2-yl-ethyl)-pyridin-2-ylmethyl-amide] are the dansyl derivatives of L(1) and L(2), respectively. Complex 4, due to paramagnetic quenching, does not display any fluorescence; however, on addition of nitric oxide to a methanol or water solution of complex 4, the fluorescence intensity of the fluorophore has been found to be restored. This is attributed to the reduction of the Cu(II) center by nitric oxide to diamagnetic Cu(I). The turn-on of quenched fluorescence intensity has been observed both in methanol and water media.     

Highly sensitive and selective optical chemosensor for determination of Cu2+ in aqueous solution

A highly selective and sensitive rhodamine-based colorimetric chemosensor (1) for quantification of divalent copper in aqueous solution has been investigated in this work. It was designed using salicylaldehyde hydrazone and rhodamine 6G as copper-chelating and signal-reporting groups, respectively. In environmentally friendly media (50% (v/v) water/ethanol and 10 mM NaAc–HAc neutral buffer (pH 7.0)), the sensor exhibited selective absorbance enhancement to Cu²⁺ over other metal ions at 529 nm, with a dynamic working range of 0.05–5.00 μM and a detection limit of 10 nM Cu²⁺, respectively. To achieve fluorometric determination of Cu²⁺, the Cu²⁺-induced absorbance enhancement of 1 was efficiently converted to fluorescence quenching by fluorescence inner filter effects using rhodamine B (RB) as a fluorophore. The selectivity and sensitivity of fluorescence analysis were similar to those of absorptiometric measurement. Both absorptiometric and fluorometric methods were successfully applied to the detection of Cu²⁺ in three water samples.     

Coumarin Based Neutral Sensor for Biologically Important Anions

A coumarin Shiff-base derivative, salicylaldehyde-N-(6-phenylazo-coumarin-3-formyl)-hydrazone(1), was obtained by simple organic synthesis from cheap and commercially available starting materials. Sensor 1 exhibits a very weak fluorescence emission, however, in the presence of acetate ions “turn-on” fluorescence is observed, which results from binding-induced conformational restriction of the fluorophore. Importantly, sensor 1 can also be used as colorimetric chemosensor for the anions with strong basicity, which is easily observed from yellow to red by naked eyes. Consequently, compound 1 can behave as a colorimetric and fluorescence sensor for biologically important F–, CH3COO– and H2PO4– in the presence of the other anions tested such as Cl–, Br– and I– in dimethyl sulfoxide(DMSO).     

Multivariate data analysis of some Finnish water courses

Summary The following parameters were analyzed 2 to 4 times a year from 37 sampling sites; T, O₂, O₂%, Turbidity, Suspended solids, Conductivity, Alkalinity, pH, Color, COD_Mn, Total nitrogen, Total phosphorus, Cl, Fe, Mn, Total sulphur, K, Na, Ca, Mg, SiO₂, Total organic chlorine and Total organic bromine. Samples were taken from waters loaded by chemical pulp mills, other industries, municipal waste waters and agriculture. Also waters under natural conditions were included. Water samples have been collected and analyzed in co-operation with the National Board of Waters and the Environment. The data set was analyzed by Principal Component Analysis (PCA) to determine correlations between variables, especially between Total organic chlorine and Total organic bromine and others. Typically Total organic chlorine and Total organic bromine correlated with Na, Cl and Total sulphur. It is interesting to note that Total organic chlorine and Total organic bromine did not follow each other in all components. Total organic chlorine was predicted using other variables and Partial Least Squares (PLS) method. Very satisfactory correlation was obtained between analyzed and predicted lgTOCl values. Optimally three different object classes were found from the whole data using fuzzy clustering analysis. One class represents waters in a natural condition, one water loaded mainly by agriculture and one represent the rest of the waters.     

Application of synchronous fluorescence to parchment characterization

A nondestructive method for quantitative parchment characterization and sensitive indication of its deterioration stage was developed. Synchronous fluorescence (SF) measurements were applied for the first time to parchment samples. The method provides detailed spectral features, which are useful for parchment characterization. The discrimination of parchment samples into groups (modern, historical, and artificially aged) was successfully performed. The SF spectra could be resolved into specific fluorophores, which were related to the parchment condition. The spectral data indicate a continuous change in the collagen-to-gelatin ratio during the aging process. Depth-resolved synchronous fluorescence spectra were also measured. The data indicate that parchments possess a layered structure, and the dominant fluorophore in the upper layer is different from those in the lower layers. Layer-resolved profiling allows for quantifying the contribution of each fluorophore in each given layer. This way, significant differences between modern, artificially aged, and historical samples can be observed.     

Assessing the dynamics of chromophoric dissolved organic matter (CDOM) in the Yellow Sea and the East China Sea in autumn by EEMs-PARAFAC

In this study we have successfully characterized the fluorescent components of chromophoric dissolved organic matter(CDOM) in the Yellow Sea and the East China Sea in autumn using excitation-emission matrix fluorescence spectroscopy(EEMs) combined with parallel factor analysis(PARAFAC).PARAFAC aids the characterization of fluorescence CDOM by decomposing the fluorescence matrices into individual components.Four humic-like components(C1,C2,C3,and C4),one marine biological production component(C6),and two protein-like components(C5 and C7) were identified by PARAFAC.We researched the distributional patterns of fluorescence intensity,regression analyses between salinity,chlorophyll a concentration and fluorescence intensities of individual fluorophore,and regression analysis between salinity and fluorescence intensities percent of individual fluorophore.The results revealed that C2 and C4 showed conservative mixing behavior,while C1 and C3 possessed conservative mixing behavior in high salinity region and additional behavior in low and middle salinity region,which were considered to be derived from riverine and degradation of organic matter from resuspended and/or sinking particles and show non-conservative mixing behavior.In addition to riverine sources,the tryptophan-like C5 may receive widespread addition(likely from photo-degradation or biodegradation),while the most likely sources for the one marine humic-like C6 and tyrosine-like C7 were biological activity and microbial processing of plankton-derived CDOM,which were suggested to be of autochthonous origin and biologically labile.The application of EEM-PARAFAC modeling presents a unique opportunity to observe compositional changes,different mixing behavior and temporal variability in CDOM in the Yellow Sea and the East China Sea.     

Perturbation of the PET process in fluorophore-spacer-receptor systems through structural modification: transition metal induced fluorescence enhancement and selectivity

Several fluorescent signaling systems are built in the format fluorophore-spacer-receptor with ethylenediamine or N,N-dimethylethylenediamine as the receptor, anthracene as the fluorophore, and a methylene group as the spacer. The receptors are derivatized with different electron-withdrawing groups such as 4-nitrobenzene, 4-nitro-2-pyridine, and 2,4-dinitrobenzene, to perturb the photoinduced intramolecular electron transfer (PET) process from the nitrogen lone-pair to the fluorophore. The photophysical properties of these supramolecular systems and their fluorescence responses toward a number of quenching transition metal ions are reported. It is shown that the PET is highly efficient in the absence of a metal ion. With a metal ion input, the fluorescence can be recovered to a different extent depending on the nature of the metal and on the overall architecture of the system as well. Despite the possibility of strong interaction between the fluorophore and the metal ion, significant fluorescence enhancement is observed with quenching of paramagnetic transition metal ions. The complex stability data show that the stability constants for the metal ions showing fluorescence enhancement are of the order of 10(4) M(-1). This study shows that structurally simple fluorescent signaling systems for quenching transition metal ions can be built by maximizing the PET. It is also shown here that simple structural modification can make these systems highly specific for particular transition metal ions for potential applications in several contemporary areas of research.     

Complete suppression of the fluorophore fluorescence by combined effect of multiple fluorescence quenching groups: A fluorescent sensor for Cu with zero background signals

The reaction-based fluorescent sensors have attracted increasing attention in the past decades. However, the application of these sensors for accurate sensing was significantly retarded by the background fluorescence from the sensors themselves. In this work, we demonstrated a novel strategy that the background fluorescence of the sensor could be completely eliminated by the combined effect of multiple fluorescence quenching groups. Based on this new strategy, as proof-of-principle study, a fluorescent sensor (CuFS) for Cu²⁺ was judiciously developed. In CuFS, three types of fluorescence quenching groups were directly tethered to a commonly used coumarin fluorophore. The fluorescence of coumarin fluorophore in CuFS was completely suppressed by the combined effect of these fluorescence quenching groups. Upon treatment with 22 μM Cu²⁺, sensor CuFS achieved a dramatic fluorescence enhancement (fluorescence intensity enhanced up to 811-fold) centered at 469 nm. The detection limits was determined to be 12.3 nM. The fluorescence intensity enhancement also showed a good linearity with the Cu²⁺ concentration in the range of 12.3 nM to 2 μM. By fabricating test strips, sensor CuFS can be utilized as a simple tool to detect Cu²⁺ in water samples. Furthermore, the fluorescent sensor was successfully applied in detecting different concentration of Cu²⁺ in living cells.     

Assessing the multisite binding properties of multiple sources of dissolved organic matter at nanomolar copper concentrations using piecewise linear regression and parallel factor analysis of fluorescence quenching

This study reports on the development and application of a piecewise linear model for the determination of copper-binding parameters at concentrations in the nanomolar range using fluorescence quenching. l-Tyrosine, Suwannee River natural organic matter, and two leaf leachates with similar fluorescence signatures were used as test compounds, and results were compared with those of the standard Ryan–Weber model. The piecewise model was also applied to and compared with data from an earlier study. Parallel factor analysis (PARAFAC) was used to identify three to five independent fluorophores in each test compound, and copper-binding parameters were estimated for one to three binding sites for each fluorophore. The binding properties of similar and different fluorophores were also compared. The conditional binding strengths (log K′) estimated using the piecewise approach were similar to those obtained using the Ryan–Weber approach (p?>?0.05); however, the piecewise linear model provided superior results compared to models based on the Ryan–Weber equation in several ways, including (1) capable of distinguishing more binding sites for a single fluorophore, (2) capable of extracting binding parameters at environmentally relevant, nanomolar concentrations of copper, where fluorescence changes are often observed as enhancement, (3) greater precision over repeated titrations, and (4) no severe underestimation of complexing capacities. Finally, the copper-binding properties of PARAFAC components with similar optical signatures were found to be similar, both in sources with dramatically different and similar total fluorescence signatures.

一种蒽醌类荧光探针的合成及对氟离子的检测性能

以1,4-二羟基蒽醌为荧光团,叔丁基二甲基氯硅烷为识别基团,设计合成了新型氟离子探针分子1,4-二-(叔丁基-二甲基-硅氧基) 蒽醌(AQTB1),其结构经¹H NMR, ¹³C NMR和MS(ESI)表征。采用FL和UV-Vis详细研究了响应时间、溶液pH值、干扰离子、氟离子浓度对探针AQTB1检测性能的影响。结果表明：探针AQTB1在pH=3~12的缓冲溶液中,实现了对氟离子的高效检测,并不受干扰离子影响。通过FL, IR和MS(ESI)对探针AQTB1检测机理进行研究,结果表明：加入氟离子后,探针分子中的Si-O键断裂,荧光较弱的AQTB1转化为荧光较强的1,4-二羟基蒽醌,实现氟离子的精确定量。实际样品分析实验中,3种不同水样中氟离子的加标回收率为88.0%～109.5%,相对标准偏差(RSD)低于8.5%。     

Determination of ammonium using a microplate-based fluorometric technique

The determination of ammonium (NH₄⁺) in concentrations ranging from nanomolar to micromolar in fresh and brackish waters often loaded in high suspended particulate matter and dissolved organic acids is presented. The newly described microplate-based fluorometric technique is allowing quick automated readings of different groups of samples with different background fluorescence and matrix effects. The lowest detectable concentration was estimated to 5 nM using the average detected blank ±3S.D. and the practical detection limit (LOD) determined with successive calibration curves was 50 nM with an excellent repeatability. High loading of suspended particular matter, coloured organic acids, and salinity changes were not interfering with the accurate determination of ammonium. To illustrate its robustness and efficiency, this technique has been applied to water samples taken from rivers, saltmarshes and estuaries, spanning a large range of ammonium levels and chemical properties. Measurements of ammonium on reddish turbid waters sampled in south shore of St. Lawrence Estuary showed ammonium concentrations between 0.05 ± 0.01 and 3.89 ± 0.03 μM, indicating a significant source of ammonium from terrestrial and saltmarsh ecosystems.     

Characterization of heavy-metal-containing seepage water colloids by flow FFF, ultrafiltration, ELISA and AAS

Heavy-metal-containing humic colloids from seepage water samples of three different municipal waste disposal plants were characterized in terms of molecular weight, hydrodynamic radius and heavy metal content. The size distribution of the colloids was determined with ultrafiltration (UF) and flow field-flow fractionation (flow FFF). The humic colloids in the seepage water samples were characterized using an off-line coupling of flow FFF with an enzyme-linked immunosorbent assay (ELISA) for humic substances. The heavy metals in the different size fractions obtained by UF and flow FFF were determined using atomic absorption spectroscopy (AAS). The colloid size distributions obtained with UF showed a maximum of the distribution in the range 1–10 nm. Seepage water samples with high colloid concentrations had a second maximum in the range 0.1–1 m. The determination of colloid size with flow FFF gave different colloid size distributions for the three waste disposal seepage waters, whereas water from the oldest disposal plant showed the smallest colloid size with a maximum at 0.9 nm and water from the most recent plant showed the largest colloid size with a maximum at 1.3 nm. The determination of particle classes with regard to the chemical composition using a scanning electron microscope with energy dispersive X-ray fluorescence detector (SEM/EDX) showed that the particles can be divided into five classes: silicates, insoluble salts, iron(hydr)oxides, carbonates and organic colloids (humic colloids). Flow FFF/ELISA off-line coupling showed that the most frequently occurring colloids of the seepage waters were humic colloids and investigation of the UF-size-fractions with AAS showed that up to 77% of the total mass of a heavy metal element can be bound to particles, especially to humic colloids. Additionally, the distributions of the heavy metals Fe, Cu and Zn were investigated with flow FFF/AAS off-line coupling. These results also showed that a substantial amount of these heavy metals (up to 46%) was bound to humic colloids.     

Reactive sensing of gold (III) by coumarin tethered fluorescent probe through alkyne activation

A novel strategy, involving anchoring and un-anchoring of coumarin based fluorophore, has been established for the selective detection of Au³⁺ species. Selective sensing of Gold (Au³⁺) was triggered due to alkynophilicity of gold ions to create lateral fluorescence of a latent fluorophore. The 4-methyl-2-oxo-2H-chromen-7-yl 2-(2-phenylethynyl) benzoate (CEB) probe was synthesized by reacting 7-hydroxy-4-methylcoumarin with iodo-benzoic acid. CEB probe has an absorption at 300 nm and 335 nm which decreases gradually and new absorption appeared at 406 nm due to Au³⁺ promoted ester hydrolysis selectively over other metal ions with great sensitivity, which accompanies a turn on fluorescence change produced by 7-hydroxy coumarin. The principle behind this sensing strategy is activation of triple bond induced uniquely by Au⁺³ ions leading to cascade and delivers active fluorophore. The sensing mechanism was proposed and supported by ¹H NMR, MS and TD-DFT experiments. The density functional theory (DFT) and time dependent density functional theory (TD-DFT) theoretical results of the CEB-probe and Au³⁺ reaction is in good agreement with the experimental results. Additionally, probe could be well incorporated onto the test strips for effective detection of Au^3+.     

Quantitative analysis of multiple urinary biomarkers of carcinoid tumors through gold-nanoparticle-assisted laser desorption/ionization time-of-flight mass spectrometry

A highly selective and sensitive coumarin-based chemodosimeter 1 for Cu(2+) in water is reported in this work. 1 was designed and facilely synthesized by a one-step reaction with coumarin as a fluorophore and 2-picolinic acid as the binding moiety, which showed very week fluorescence in buffer solution, and its fluorescence was considerably enhanced by the addition of Cu(2+) at room temperature in 5 min. Mechanism study suggested that Cu(2+) promoted the hydrolysis of 1 via the catalytic sensing cycle, generating a highly fluorescent product 7-hydroxycoumarin with fluorescence signal greatly amplified. The probe exhibited remarkably selective fluorescence enhancement to Cu(2+) over other metal ions at 454 nm, with a detection limit of 35 nM Cu(2+). Under optimal condition, 1 was successfully used for the determination of Cu(2+) in fetal equine serum and two water samples.