Molecular dynamics simulation study of the role of evenly spaced poly(ethylene oxide) tethers on the aggregation of C60 fullerenes in water

The aggregation behavior of C60 fullerenes and C60 fullerenes with six symmetrically tethered poly(ethylene oxide) oligomers [(PEO)-6-C60] in aqueous solutions has been studied using implicit solvent molecular dynamics simulations. Our simulations reveal that while the attraction between two (PEO)-6-C60 fullerenes in aqueous solution is stronger and longer range than that between two bare C60 fullerenes, the (PEO)-6-C60 fullerenes do not phase-separate in water but rather aggregate in chain-like clusters at concentrations where unmodified fullerenes completely phase-separate.     

Evolution spectrum of C60 isomers in buffer gas

The energy spectrum of C60 nonclassic fullerenes with single heptagon defects calculated by Brenner empirical potential is found to submerge into the spectrum of classic fullerenes. Geometry analysis indicates that these nonclassic fullerene isomers can be more attainable than classic fullerenes at higher Stone-Wales (SW) stacks. Molecular dynamic simulations of the C60 isomer evolution in He buffer gas at 2500 K demonstrate that nonclassic fullerenes, especially those with heptagon defects, play an important role in the dynamics of C60 annealing, and that the Stone-Wales stack-by-stack transition mainly occurs at lower SW stacks. A non-SW multistep rearrangement is first observed in the simulation with its transition sequence and intermediate state presented in detail.     

富勒烯(C60／C70)与N，N，N’，N’-四-(对甲苯基)-4，4’-二胺-1，1’-二苯硒醚(TPDASe)间光诱导电子转移过程的激光光解研究

富勒烯(C60／C70)与N，N，N’，N’-四-(对甲苯基)-4，4’-二胺-1，1’-二 苯硒醚(TPDASe)间在激光光诱导条件下，发生了分子间的电子转移过程．在可见- 近红外区(600-1200nm)，观测到了TPDASe阳离子自由基、富勒烯(C60／C70)激发三 线态和阴离子自由基，在苯腈溶液中，观测瞬态谱测定了电子从TPDASe转移到富勒 烯(C60／C70)激发三线态的量子转化产率(Φet^T)和电子转移常数(Ket)．     

A molecular-dynamics simulation study of solvent-induced repulsion between C60 fullerenes in water

Molecular-dynamics simulations of a single C(60) fullerene and pairs of C(60) fullerenes in aqueous solution have been performed for the purpose of obtaining improved understanding of the nature of solvent-induced interactions between C(60) fullerenes in water. Our simulations reveal repulsive solvent-induced interactions between two C(60) fullerenes in aqueous solution in contrast to the associative effects observed for conventional nonpolar solutes. A decomposition of the solvent-induced potential of mean force between fullerenes into entropy and energy (enthalpy) contributions reveals that the water-induced repulsion between fullerenes is energetic in origin, contrasting strongly to entropy-driven association observed for conventional nonpolar solutes. The dominance of energy in the solvent-induced interactions between C(60) fullerenes arises primarily from the high atomic density of the C(60) molecule, resulting in strong C(60)-water van der Waals attraction that is reduced upon association of the fullerenes. The water-induced repulsion is found to decrease with increasing temperature due largely to an increasing contribution from a relatively weak entropy-driven association.     

C60大量、快速分离和电喷雾电离质谱检测

本文用配合沉淀和活性炭吸附相结合的方法，从高级富勒烯含量较高的混合物中，大量、快速分离Ｃ６０，并用电喷雾电离质谱对分离产物进行检测     

Towards formation of buckminsterfullerene C60 in quantum chemical molecular dynamics

We present follow-up studies on the formation mechanism of fullerene molecules from random ensembles of C2 molecules using quantum chemical molecular dynamics. Two possible roadmaps are investigated as to how buckminsterfullerene C60 and higher fullerenes could be formed. In a "size-up" scenario, fullerenes of the cage size of C72-C96 were found to form directly from high concentrations of C2 molecules at 2000 K with periodic supply of batches of additional C2's. In a "size-down" approach, smaller fullerenes are sometimes formed by losing carbon fragments in "fall-off" or "pop-out" annealing processes under prolonged heating of giant fullerenes, which were self-assembled at initial stages from C2's with lower concentrations. Both roadmaps are found to provide explanations for the appearance of C60 and larger fullerenes in combustion and carbon arc experiments.     

Regioselective synthesis of 1,4-di(organo)[60]fullerenes through DMF-assisted monoaddition of silylmethyl Grignard reagents and subsequent alkylation reaction

Monoaddition of Grignard reagents, in particular tri(organo)silylmethylmagnesium chlorides, to [60]fullerene took place smoothly in the presence of dimethylformamide to produce (organo)(hydro)[60]fullerenes, C60R(1)H, in good yield (up to 93% isolated yield). The hydrofullerene was then deprotonated to generate the corresponding anion, C60R(-), which was then alkylated to obtain 58pi-electron di(organo)[60]fullerenes, C60R(1)R(2), in good to high yield (up to 93% overall yield). The two-step methodology provides a wide variety of 1,4-di(organo)[60] fullerenes bearing the same or different organic addends on the [60] fullerene core. By changing the addends, one can control the chemical and physical properties of the compounds at the molecular and bulk levels.     

Ring-opening reaction of cyclopropanated [60]fullerenes: unexpected transformation of methano[60]fullerenes having an electron-donating group on the methano-bridge carbon

A series of novel transformations of [60]fullerene derivatives were found, starting from methano[60]fullerenes with an electron-donating group on the methano-bridge carbon. Aminomethano[60]fullerenes, in situ generated by the treatment of their trifluoromethanesulfonic acid salts with a base, were readily converted into 1-acyl-1,2-dihydro[60]fullerenes via the ring opening of the cyclopropane moiety. The aldehyde/ketones thus obtained were easily hydrolyzed to give 1,2-dihydro[60]fullerene in the presence of hydroxide anions.     

Moving of fullerene between potential wells in the external icosahedral shell

The results of the theoretical investigation of the behavior of fullerenes C₂₀ and C₆₀ inside the icosahedral external shell on example of carbon nanoclusters, C₂₀@С₂₄₀ and C₆₀@С₅₄₀, are presented in this article. The multiwell potential of interaction between fullerenes in investigated nanoclusters is calculated to reveal the regularities of moving for internal fullerene in the field of holding potential of the external shell. The possible variants of fullerenes C₂₀ and C₆₀ moving between the potential wells are predicted on base of topology data of the fullerenes relative positioning in nanoparticle and analysis of relief of the energy surface of interaction between fullerenes. The formulated prediction is confirmed by the data of the numerical experiment. The investigation of two‐shell fullerenes allows to conclude that the light fullerene С₂₀ will probably jump between the potential wells already at small temperatures (139–400 K) if the external shell is slightly bigger. © 2014 Wiley Periodicals, Inc.     

Technology for manufacture of pure fullerenes C60, C70 and a concentrate of higher fullerenes

An integrated technology for manufacture of fullerenes was developed. It includes the following stages: synthesis of a fullerene black, extraction of a mixture of fullerenes from the black, preliminary separation of the mixture into concentrates enriched in C₆₀ and C₇₀ fullerenes, and production of C₆₀ and C₇₀ fullerenes of purity exceeding 99.5 and 98.0 wt %, respectively, from the concentrates.     

Evaluation of extraction methods for quantification of aqueous fullerenes in urine

There is a growing concern about the human and environmental health effects of fullerenes (e.g., C(60)) due to their increasing application in research, medicine, and industry. Toxicological and pharmacokinetic research requires standard methods for extraction and detection of fullerenes from biological matrices such as urine. The present study validates the use of liquid-liquid extraction (LLE) and solid-phase extraction (SPE) methods in conjunction with liquid chromatography-mass spectrometry (LC-MS) for the quantitative determination of C(60) in human and synthetic urine as compared with ultrapure water. Glacial acetic acid, which is necessary to prevent emulsions during LLE, inhibited C(60) detection by LC-MS, but this could be mitigated with evaporation. Aqueous C(60) aggregates (nC(60)) were spiked at 180 μg/L into the components of a synthetic urine recipe to determine their individual impacts on extraction and detection. Urea, creatinine, and a complex protein (i.e., gelatin) were found to impair SPE, leading to a low recovery rate of 43 ± 4% for C(60) spiked into human urine. In contrast, C(60) was consistently recovered from synthetic matrices using LLE, and recovery in human urine was 80 ± 6%. These results suggest that LLE combined with LC-MS is suitable for studying the clearance of fullerenes from the body. LLE is a robust technique that holds promise for extracting C(60) from other complex biological matrices (e.g., blood, sweat, amniotic fluid) in toxicological studies, enabling a better understanding of the behavior of fullerenes in human and animal systems and facilitating a more comprehensive risk evaluation of fullerenes.     

2,4,6-三硝基苯酚改性锆镁复合氧化物固定相分离富勒烯的色谱性能研究

制备了用于分离C60和C70的2,4,6-三硝基苯酚改性锆镁复合氧化物高效液相色谱固定相,并用元素分析仪、红外光谱仪和比表面积分析仪等对其进行了表征。考察了流动相中甲苯含量和柱温对C60和C70分离的影响。同时考察了以甲苯为流动相,在348 K的柱温下,该固定相分离富勒烯混合物(含3%高富勒烯)的情况。结果表明,2,4,6-三硝基苯酚改性锆镁复合氧化物固定相对富勒烯有较强的保留,并表现出较强的温度关系,提高柱温能提高固定相对富勒烯的分离能力,并具有用于富勒烯制备分离的潜力。     

Mass spectrometry and fullerenes

This article presents, from amass spectrometry perspective, an historical account of research on gas-phase carbon clusters, which has led to the discovery of another form of carbon, fullerenes. In addition, more recent mass spectrometric studies on analysis of fullerene derivatives and synthesis of doped fullerenes are described. The early, strong evidence for certain “magic number” carbon clusters, most notably C₆₀ (buckminsterfullerene), was obtained largely from mass spectrometric experiments. These studies led to the controversial postulation of the soccerball structure for C₆₀, which provoked increased experimental and theoretical efforts. This research eventually resulted in the discovery of a simple method by which large quantities of fullerenes can be produced. The availability of these new, all-carbon molecules has motivated a broad range of synthetic and characterization studies that are expanding at a frenetic pace. Mass spectrometry not only played a critical role in the discovery of fullerenes but also now is crucial for determination of the unusual chemical and physical properties of fullerenes and fullerene-based materials.     

Supramolecular self-organization in PEO-modified C60 fullerene/water solutions: influence of polymer molecular weight and nanoparticle concentration

Utilizing a first-principles-based coarse-grained implicit solvent model, we have investigated the self-association of C(60) fullerenes that have been symmetrically modified with six grafted poly(ethylene oxide) (PEO) chains in aqueous solution. Despite the highly symmetric nature of the pair interactions between PEO-grafted fullerenes, their supramolecular assemblies are highly anisotropic and resemble the linear clusters formed in Stockmayer fluids. The dipole-like interaction between these symmetrically modified fullerenes results from the shielding of the C(60) fullerenes by PEO, favoring the addition of more PEO-grafted fullerenes to the linear clusters at the relatively unprotected ends. At low nanoparticle concentrations, self-association is dominated by the formation of stable dimers and trimers resulting from fullerene-fullerene contact and favorable PEO-fullerene interactions. With increasing nanoparticle concentration, larger clusters become increasingly probable. The molecular weight of the PEO tethers can be treated as a temperature-like analogue, with a reduction in average cluster size with increasing chain length due to increased steric repulsion, which is qualitatively similar to effects observed in Stockmayer fluids with increasing temperature. The role of PEO in supramolecular self-organization in PEO-modified C(60) fullerene/water solutions is complex, contributing not only to steric stabilization but also to favorable energetic interactions, nanoparticle shielding, and depletion-driven aggregation.     

On the thermal stability of [60]fullerene cycloadducts: retro-cycloaddition reaction of 2-pyrazolino[4,5:1,2][60]fullerenes

2-Pyrazolino[4,5:1,2][60]fullerenes undergo a thermally induced retro-cycloaddition process whose efficiency is influenced by the nature of the C-substituent. C-Aryl-N-Aryl-2-pyrazolino[60]fullerenes (2a-d) poorly undergo a thermal retro-cycloaddition reaction even in the presence of a strong dipolarophile or a metal Lewis acid which, in contrast to other fullerene derivatives, shows their remarkable thermal stability. C-Alkyl-N-Aryl-2-pyrazolino[60]fullerenes (2e-f) show a different behavior, being more vulnerable to the presence of copper triflate and leading to the retro-cycloaddition product (pristine C60) in good yield.     

球壳烯类的化学修饰

自从Kratschmer和Huffman发表了较为简便的制备和分离碳-60,碳-70的方法以来,对于球壳烯类,特别是碳-60的表征和物化性质已进行了较为翔实的研究。关于球壳烯类的化学修饰,尽管起步较晚,对其兴趣也日益高涨。本文综述了球壳烯类的化学修饰,特别在球壳烯外壳的化学反应方面。     

Use of cerium oxide (CeO(2)) as a packing material for the chromatographic separation of C(60) and C(70) fullerenes

Cerium oxide (CeO₂) was tested as a packing material in liquid chromatography for the separation of C₆₀ and C₇₀ fullerenes. The separation of C₆₀ and C₇₀ fullerenes could be achieved within 20 min by using pure n-hexane as the mobile phase. Furthermore, some higher fullerenes could also be separated in less than 40 min. The peak area was reproducible to a large extent. The separation of fullerenes by liquid chromatography on CeO₂ is shown to be an effective method for their isolation in large amounts. The column efficiency of the CeO₂ column was compared with commercial silica gel and ODS columns. The main advantage of the CeO₂ column is its ability to separate large amounts of fullerenes (C₆₀ and C₇₀) in toluene.     

Classical molecular dynamics study of [60]fullerene interactions with silica and polyester surfaces

This study examines the interaction of neutral and charged fullerenes with model silica and polyester surfaces. Molecular dynamics simulations at 298 K indicate that van der Waals forces are sufficiently strong in most cases to cause physisorption of the neutral fullerene particle onto the surfaces. The fullerenes are unable to penetrate the rigid silica surface but are generally able to at least partially infiltrate the flexible polymer surface by opening surface cavities. The introduction of charge to the fullerene generally leads to an increase in both the separation distance and Work of Separation with silica. However, the charged fullerenes generally exhibit significantly closer and stronger interactions with polyester films, with a distinct tendency to absorb into the "bulk" of the polymer. The separation distance and Work of Separation of C60 with each of the surfaces also depend greatly on the sign, magnitude, and localization of the charge on the particle. Cross-linking of the polyester can improve resistance to the neutral fullerene. Functionalization of the polyester surface (F and OH substituents) has been shown to prevent the C60 from approaching as close to the polyester surface. Fluorination leads to improved resistance to positively charged fullerenes, compared to the unmodified polyester. However, hydroxylation generally enables greater adhesion of charged fullerenes to the surface due to H-bonding and electrostatic attraction.     

Simulating the thermal behavior and fragmentation mechanisms of exohedral and substitutional silicon-doped C60

Structures, thermal behavior, and fragmentation mechanisms of exohedral and substitutional silicon-doped C(60) containing 1-12 Si atoms are investigated by extensive molecular-dynamics simulations. A nonorthogonal tight-binding model is used to mimic the interatomic interactions in the doped fullerenes. Beginning from the minimum-energy structures, the temperature of the doped fullerenes is slowly increased until fragmentation takes place. A correlation can be established between the exohedral and substitutional structures and the corresponding fragmentation mechanisms and fragmentation temperatures. Exohedral C(60)Si(m) fullerenes fragment into two homonuclear pieces, the Si(m) cluster and the C(60) fullerene that remains intact. In contrast, the substitutional C(60-m)Si(m) heterofullerenes undergo structural transformations, including the partial unraveling of the cage, prior to fragmentation. Then, ejection of atoms or small molecules takes place from the distorted structures. The slow heating rate used, combined with long simulation runs, allows us to determine the fragmentation temperature of exohedral and substitutional Si-doped fullerenes as a function of the number of silicon atoms. Substitutional Si-doped fullerenes exhibit much higher fragmentation temperatures (1000-1500 K higher) than the exohedral fullerenes. This can be understood from the different bonding of the Si atoms in both structures.     

富勒烯（C_(60)/C_(70)）与三苯基胺间的光诱导电子转移过程研究

用激光光解方法研究了富勒烯（C_(60)/C_(70)）与三苯基胺（TPA）间的光诱 导电子转移过程。在近红外区,观测到TPA阴离子自由基,富勒烯（C_(60)/C_(70) ）激发三线态和阴离子自由基。在苯腈溶液中,利用瞬态谱测定了电子从TPA转移 到富勒烯（C_(60)/C_(70)）激发三线态的量子转化产率（Φ_(et)）和电子转移常 数（k_(et)）。