Electrooxidation of ethylene glycol using gold nanoparticles electrodeposited on pencil graphite in alkaline medium

The electrooxidation of ethylene glycol(EG) on the surface of gold nanoparticles(AuNPs) in alkaline medium was investigated.AuNPs were electrodeposited on pencil graphite(PG) by fast scan cyclic voltammetry.Different sizes of AuNPs deposited on the surface of PG(AuNPs/PG) were used for the electrooxidation process.AuNPs were electrodeposited on PG at various deposition times in the same potential range but with different scan rates and scan cycles.Scanning electron microscopy(SEM),transmission electron microscopy(TEM) and X-ray diffraction(XRD) were used to visualize and characterize the prepared AuNPs/PG electrodes.Cyclic voltammograms were also used to investigate the electrooxidation of EG.The effects of EG and supporting electrolyte concentrations,scan rate,particle size of AuNPs and final potential limit on the electrooxidation process have been investigated.Further studies showed that the electrooxidation of EG is affected by temperature of the medium.The prepared AuNPs showed stability after long-term use.     

Self-assembly of gold nanoparticles on fullerene nanospheres

A C60-pyrrolidine derivative with a hydrophobic-hydrophilic-hydrophobic structure (2-{3,4-di{2-[2-(2-decyloxyethoxy)ethoxy]ethoxy}}phenyl-3,4-fulleropyrrolidine, DTPF) has been synthesized and well-characterized. This compound could form stable nanospheres by simply injectingits tetrahydrofuran (THF) solution into water and then removing THF by purging gaseous nitrogen in sequence. Novel nanoassemblies of DTPF nanospheres and gold nanoparticles were obtained through in situ photoreduction of aqueous HAuCl4 in the presence of DTPF nanospheres, which were confirmed by UV-visible, transmission electron microscopy, X-ray powder diffraction, and X-ray photoelectron spectroscopy methods. It is proposed that the interaction between the positively charged nitrogen atom and the gold nanoparticles is the main driving force for the formation of the nanoassemblies.     

Self-assembly of lysozyme on the surfaces of gold nanoparticles

The interaction of lysozyme(Lys) and gold nanoparticles was investigated via UV-vis absorption and resonance light-scattering method.There are some changes of the plasmon absorption and resonance light-scattering of gold nanoparticles that were observed via the addition of Lys.The normalized plasmon absorption and resonance light-scattering intensity with gold nanoparticles were both linear wilh 1-20 nmol/L Lys.A simple model about the component of the gold nanoparticles and Lys complex was established and the calculated result was fitted well in their concentration ratio.Furthermore,the activity analysis of Lys showed that the interaction was weak and nondestructive.     

Self-assembly of gold nanoparticles on functional organic molecular crystals

The utilization of metal nanoparticles (NPs) to fabricate metal electrodes under mild conditions is one of the most studied topic in recent years. In this work, colloidal Au NPs were deposited on two isostructural molecular crystals, namely 1,2,3,4-tetrafluoro-7-thiomethyl-acridine (MeSAcr) and 1,2,3,4-tetrafluoro-7-methoxy-acridine (MeOAcr), exposing S atoms and O atoms, respectively, at their largest crystal faces. The depositions were carried out mainly by drop casting under ambient conditions, increasing the contact time from 1 to 120 min, and the samples were then analyzed by atomic force microscopy (AFM) to evaluate the coverage. Thanks to the affinity between S and Au atoms, Au NPs are observed to adhere on the MeSAcr surface within 1-min contact time, whereas at least 1h is required to find NPs on the MeOAcr surface. NP adsorption is also affected by the substrate surface morphology; indeed, step edges represent preferential adsorption sites even in the absence of Au-S interaction. Experiments under different conditions were performed to maximize the coverage on MeSAcr, reaching values up to 13%. AFM equipped with fluid cell was also employed to simultaneously depositing and imaging NPs, achieving a better understanding of the adsorption mechanism.     

Self-assembly of small gold nanoparticles through interligand interaction

Stable and monodisperse Au nanoparticles smaller than 2 nm are easily prepared by the reduction of HAuCl(4) x 4H(2)O in DMF/H(2)O in the presence of a series of bidentate ligands, 2,6-bis(1'-(n-thioalkyl)benzimidazol-2-yl)pyridine (TC(n)BIP, n = 3, 6, 8, 10, 12). The TC(n)BIP ligands afford stronger coordination ability than alkanethiols due to their bidentate nature. These small nanoparticles form hexagonal close-packed (hcp) two-dimensional (2D) superlattices with tunable interparticle spacings (from 1.2 to 2.5 nm), produced by changing the length of the ligand at both the hydrophobic amorphous carbon and the air-water interface. Long-range-ordered hcp 2D superlattices were fabricated through the cleavage and construction of interligand pi-pi interactions formed via an annealing process at the air-water interface.     

Self-assembly of anisotropic tobacco mosaic virus nanoparticles on gold substrate

A facile approach to assembled virus film with tunable structure is presented.Rod-like tobacco mosaic virus (TMV) was selected as the prototype in this study for its anisotropic structural feature.TMV can either lie down or stand up on gold substrate by tuning the solution pH.A quartz crystal microbalance with dissipation monitoring was used to monitor the pH-dependent self-assembly behavior of TMV nanoparticles,and atomic force microscopy and single molecule force spectroscopy further confirmed the differe...     

An acetylcholinesterase enzyme electrode stabilized by an electrodeposited gold nanoparticle layer

Electrodeposition of colloidal gold nanoparticles onto a planar gold electrode was used to create a more favorable surface for the attachment of the enzyme acetylcholinesterase. Atomic force microscopy demonstrated that the gold nanoparticles roughened the surface consequently enhancing the interaction of the enzyme with the gold electrode. The enzyme-modified electrode sensor was utilized for the sensitive electrochemical detection of thiocholine at the gold surface after hydrolysis of acetylthiocholine by the immobilized enzyme. In the absence of the nanoparticle layer, the sensor response to acetylthiocholine was significantly reduced and the utility of the electrode was limited. The ability of the nanoparticle-based sensor to reliably measure concentrations of the organophosphate pesticide carbofuran at nM concentrations was demonstrated by monitoring the inhibition of the hydrolysis of acetylthiocholine. This relatively straightforward strategy is potentially valuable for the development of new devices for the sensitive detection of potentially dangerous and deadly neurotoxins.     

Electrochemical impedance spectroscopy detection of lysozyme based on electrodeposited gold nanoparticles

A simple, highly sensitive, and label-free electrochemical impedance spectroscopy (EIS) aptasensor based on an anti-lysozyme-aptamer as a molecular recognition element, was developed for the detection of lysozyme. Improvement in sensitivity was achieved by utilizing gold nanoparticles (AuNPs), which were electrodeposited onto the surface of a gold electrode, as a platform for immobilization of the aptamer. To quantify the amount of lysozyme, changes in the interfacial electron transfer resistance (R_et) of the aptasensor were monitored using the redox couple of an [Fe(CN)₆]^3−/4− probe. The R_et increased with lysozyme concentration. The plot of R_et against the logarithm of lysozyme concentration is linear over the range from 0.1 pM to 500 pM with a detection limit of 0.01 pM. The aptasensor also showed good selectivity for lysozyme without being affected by the presence of other proteins.     

Self-assembly of multilayer films containing gold nanoparticles via hydrogen bonding

Polymer/Au nanoparticle multilayer ultrathin films are fabricated via hydrogen-bonding interaction by a layer-by-layer technique. The Au nanoparticles surface-modified with pyridine groups of poly(4-vinylpyridine) (PVP) are prepared in dimethyl formamide (DMF). Transmission electron microscopy (TEM) image shows that uniform nanoparticles are dispersed in the PVP chains. Poly(3-thiophene acetic acid) (PTAA) and poly(acrylic acid) (PAA) are utilized to form hydrogen bonds with PVP, respectively. Considering the pH-sensitive dissociation behavior of PTAA and PAA, we investigate the release behavior of the Au-containing multilayers at different pH values in this work. UV-vis spectroscopy and atomic force microscopy (AFM) are employed to monitor the buildup and the release of the multilayers. The results indicate that in the films assembled with gold nanoparticles, the polymers are difficult to be removed from the substrate. The interaction between the gold particles and the neighboring PVP chains is responsible for the phenomenon. Gold particles act as physical cross-link points in the multilayers. Due to the additional interaction caused by the gold nanoparticles in the films except the hydrogen-bonding interaction between PTAA (or PAA) and PVP, the stability of the Au-containing multilayer film is ensured even though the changes in pH values may result in the break of the hydrogen bonds.     

An original nitrate sensor based on silver nanoparticles electrodeposited on a gold electrode

The electroreduction of nitrate in synthetic seawater was investigated by cyclic voltammetry (CV) at a bare gold electrode modified by electrodeposited silver nanoparticles (AgNPs). The AgNPs were generated by chronoamperometry using a charge, Q, lower than the theoretical one corresponding to a silver monolayer. In these conditions, a linear range for nitrate determination is obtained from 10·10^-6 mol L^-1 to 10·10^-3 mol L^-1. Such a low limit of detection was achieved due to the combination of two chemical reactions coupled with electron transfer.     

Reactive capture of gold nanoparticles by strongly physisorbed monolayers on graphite

Anthracene Diels Alder adducts (DAa) bearing two long side chains (H-(CH₂)₂₂O(CH₂)₆OCH₂-) at the 1- and 5-positions form self-assembled monolayers (SAMs) at the phenyloctane - highly oriented pyrolytic graphite (HOPG) interface. The long DAa side chains promote strong physisorption of the monolayer to HOPG and maintain the monolayer morphology upon rinsing or incubation in ethanol and air-drying of the substrate. Incorporating a carboxylic acid group on the DAa core enables capture of 1-4 nm diameter gold nanoparticles (AuNPs) provided (i) the monolayer containing DAa-carboxylic acids is treated with Cu²⁺ ions and (ii) the organic coating on the AuNP contains carboxylic acids (11-mercaptoundecanoic acid, MUA-AuNP). AuNP capture by the monolayer proceeds with formation of Cu²⁺ - carboxylate coordination complexes. The captured AuNP appear as mono- and multi-layered clusters at high coverage on HOPG. The surface density of the captured AuNPs can be adjusted from AuNP multi-layers to isolated AuNPs by varying incubation times, MUA-AuNP concentration, the number density of carboxylic acids in the monolayer, the number of MUA per AuNP, and post-incubation treatments.     

Immobilization of acetylcholinesterase on one-dimensional gold nanoparticles for detection of organophosphorous insecticides

This paper reports a simple method for immobilization of acetylcholinesterase (AChE) on one-dimensional (1D) gold (Au) nanoparticles for detection of organophosphorous (OP) insecticides. 1D Au nanoparticles were prepared by electrodeposition in the pores of an alumina template which was subsequently removed by 2.0 M NaOH solution. They were characterized by XRD and FESEM. The immobilized AChE retained its biological activity and catalyzed the hydrolysis of acetylthiocholine to form thiocholine, which was su...     

Self-assembly of core-satellite gold nanoparticles for colorimetric detection of copper ions

Molecule-coated nanoparticles are hybrid materials which can be engineered with novel properties. The molecular coating of metal nanoparticles can provide chemical functionality, enabling assembly of the nanoparticles that are important for applications, such as biosensing devices. Herein, we report a new self-assembly of core-satellite gold nanoparticles linked by a simple amino acid l-Cysteine for biosensing of Cu²⁺. The plasmonic properties of core-satellite nano-assemblies were investigated, a new red shifted absorbance peak from about 600 to 800 nm was found, with specific wavelength depending on ratios with assembly of large and small gold nanoparticles. The spectral features obtained using surface-enhanced Raman spectroscopy (SERS) provided strong evidence for the assembly of the Cu²⁺ ions to the L-Cysteine molecules leading to the successful formation of the core-satellite Cu(l-Cysteine) complex on the gold surfaces. In addition, a linear relationship between the concentration of mediating Cu²⁺ and absorbance of self-assembled gold nanoparticles (GNPs) at 680 nm was obtained. These results strongly address the potential strategy for applying the functionalized GNPs as novel biosensing tools in trace detections of certain metal ions.     

Self-assembly of gold nanoparticles induced by poly(oxypropylene)diamines

A series of poly(oxypropylene)diamines D230, D400, D2000, and D4000, having molecular weights of hydrophobic segments of 230, 400, 2000, and 4000, were used as ligands to synthesize self-organized gold nanocrystals. Ligand exchange significantly reduced the average particle size and the polydispersity of nanocrystals, and this effect was more remarkable as the molar ratio of amine groups to Au3+ ions ([N]/[Au3+] ratio) was increased. Under the same [N]/[Au3+] ratio of 100, D2000 generated an ordered 2D-monolayer; however, D230 and D400 colloids formed mainly a densely packed 3D structure with minor 2-D layers, and D4000 presented disordered 3D and 2D structures. The gap among the nanoparticles was found to be increased with the increasing molecular weight of the hydrophobic segment of ligands, accompanied by the decreasing wavelength of UV-vis absorption bands. This increased gap can be interpreted as the ligand thickness calculated from the equation of steric force increasing with increasing molecular weight of the hydrophobic segment. The potential energies obtained from the calculated ligand thickness according to the soft sphere model show more steep potential wells for D230 and D400 colloids than that for the D2000 colloid. This explains why the aggregation hardly occurred for the gold nanoparticles obtained under D2000, where the nanoparticles are single crystals having face center crystal structure with a lattice constant of 2.36 A and have grain sizes close to the average particle sizes, evidenced from the results of transmission electron microscopy and X-ray diffraction spectroscopy.     

Self-assembly and encoding of polymer-stabilized gold nanoparticles with surface-enhanced Raman reporter molecules

Polymer-stabilized gold nanoparticles (AuNPs) were prepared and encoded with a range of surface-enhanced Raman reporter molecules. A range of as-synthesized polymers produced by reversible addition fragmentation chain transfer (RAFT) polymerization were demonstrated to self-assemble at the surface of AuNPs dispersed in water. The method involved the coprecipitation of polymer-gold conjugates by the addition of polymer dissolved in a water-miscible solvent to gold AuNPs dispersed in water. This method represents a simplification of the preparation of polymer-stabilized AuNPs compared with other published methods, in that the AuNPs do not need to be first transferred to an organic solvent. The process enabled the polymer stabilized AuNPs to be easily recovered by filtration or by phase transfer of the AuNPs to an organic solvent in which the RAFT polymer was soluble. The polymer-stabilized AuNPs were characterized by a range of methods including UV-visible spectrophotometry, transmission electron microscopy, thermogravimetric analysis, dynamic light scattering, and attenuated total reflection Fourier transform infrared spectroscopy. Furthermore, 1H pulsed field gradient spin echo NMR was utilized to characterize the self-diffusion of the polymer-stabilized AuNPs. Finally, we then demonstrated that these polymer-stabilized AuNPs maintained their ability to be encoded with surface-enhanced Raman spectroscopy reporter molecules.     

A glucose biosensor based on electrodeposited biocomposites of gold nanoparticles and glucose oxidase enzyme.

Electrodeposition was used for the codeposition of glucose oxidase enzyme and a gold nanoparticle-silicate network onto an indium tin oxide (ITO) glass electrode. This co-entrapment of glucose oxidase enzyme in a gold nanoparticle-silicate network imparts biocatalytic activity to the film. The gold nanoparticles in the network catalyse the oxidation and reduction of H2O2, the by-product of the enzymatic reaction. The low operating potential of the sensor eliminates the interference from common interferents, such as acetaminophen, ascorbic acid, dopamine, etc.     

Self-assembly of gold nanoparticles to carbon nanotubes using a thiol-terminated pyrene as interlinker

Gold nanoparticles were self-assembled onto the surface of solubilized carbon nanotubes through an interlinker of bi-functionalized molecule (PHT) terminated with pyrenyl unit at one end and thiol group at the other end. While the fluorescence of PHT is quenched moderately by the carbon nanotubes, the fluorescence is almost totally quenched by the further binding of gold nanoparticles. The enhancement of the Raman responses of nanotubes by the gold nanoparticles is also observed. These results imply there are charge transfer interactions between nanotubes and gold nanoparticles.     

A novel hydrogen peroxide sensor based on Ag nanoparticles electrodeposited on chitosan-graphene oxide/cysteamine-modified gold electrode

A novel strategy to fabricate a hydrogen peroxide sensor based on Ag nanoparticles electrodeposited on chitosan-graphene oxide nanocomposites/cysteamine-modified gold (Au) electrode was reported. The chitosan-graphene oxide nanocomposites were first assembled on a cysteamine-modified Au electrode to produce chitosan-graphene oxide/cysteamine/Au electrode. Then Ag nanoparticles were electrodeposited on the modified Au electrode and formed Ag nanoparticles/chitosan-graphene oxide/cysteamine/Au electrode. The chitosan-graphene oxide nanocomposites and the electrodeposited Ag nanoparticles were characterized by atomic force microscopy and scanning electron microscopy. The results showed the Ag nanoparticles were uniformly dispersed on the chitosan-graphene oxide/cysteamine/Au electrode. The cyclic voltammagrams and amperometric method were used to evaluate electrocatalytic properties of the Ag nanoparticles/chitosan-graphene oxide/cysteamine/Au electrode. The results showed that the modified electrode displayed good electrocatalytic activity to the reduction of hydrogen peroxide with a detection limit of 0.7 μM hydrogen peroxide based on a signal-to-noise ratio of 3. The sensor has good reproducibility, wide linear range, and long-term stability.     

Voltammetric determination of cysteine at a graphite electrode modified with gold nanoparticles

The electrochemical behaviour of cysteine (Cys) at a graphite electrode modified with gold nanoparticles (G-Au_nano electrode) was studied by cyclic voltammetry. It was found that the graphite electrode-Au nanoparticles show an electrocatalytic activity towards the oxidation of Cys in 0.1?M NaOH. At 0.05?V, there is an “inverse” maximum in the cathodic voltammogram of Cys. Using a G-Au_nano electrode, the dependence of the peak current of the “inverse” maximum on Cys concentration was linear in the range from 1 to 14?pM, and the detection limit was 0.6?pM. The proposed analytical method is simple, rapid and sensitive.