Influence of initial oxygen coverage and magnetic moment on the NO decomposition on rhodium (111)

In this study, density functional theory calculations were performed to investigate the influence of oxygen preoccupation on the nitrogen oxide decomposition on rhodium. Besides gauging the coverage dependence of the adsorption energy of NO on the (111) rhodium facet, the influence of the initial oxygen coverage on the kinetics and thermodynamics of the nitrogen oxide decomposition reaction was also studied. The results are discussed with respect to a novel NOx decomposition catalyst. Furthermore, the influence of spin effects on the adsorption geometry as well as the adsorption energy is examined. It will be addressed why spin effects only have a minor influence on the behavior of NO on a rhodium surface.     

Density function theory study on energetic nitro-triaziridine derivatives

The series of nitro-triaziridines had been studied as high-energy density compounds at B3LYP/6-311G** and MP2/6-311G** levels by means of density functional theory. The heats of formation (HOFs), bond dissociation energies, and detonation performance had been calculated in detail. It was found that all nitro-triaziridines have high position HOFs, and electron-withdrawing of nitro, the steric hindrance, and abundant N–N bond had positive effect with increasing values of HOFs. The thermodynamic stability is estimated by bond dissociation energy and available free space per molecule in unit cell. The detonation performance had been estimated via Kamlet–Jacobs equation and relative specific, However, two different consequences were obtained for detonation performance. Hence, for nitro-triaziridines derivatives, we assumed that a large number of extra oxygen was produced in combustion reaction or explosive reaction, which was negative for the energy released. Therefore, the oxygen balance must be considered for designing high-energy compounds. We also assumed that the Kamlet–Jacobs equation may not be applicable for the compounds, which was constituted of only oxygen, hydrogen, and nitrogen elements.     

SiH3与NO2反应机理的理论研究

The reaction between silyl radicals and nitric oxide was studied by using the B3LYP/6 311G and the high-level electron-correlation CCSD(T)/6-311G methods. The geometries for reactants, the transition states and the products were completely optimized. All the transition states are verified by the vibrational analysis and the intrinsic reaction coordinate (IRC) calculations. The results show that the reaction is via multi-channel and multi-step. Five products may be formed via the complex reaction channels, i.e. association, H-shift and dissociation.     

Linear relationship between activation energies and reaction energies for coverage-dependent dissociation reactions on rhodium surfaces

Evidence of a relationship between activation energies and enthalpy changes of various dissociation reactions on transition metals has been reported recently. A reconsideration of density functional theory results for dissociation energies of oxygen and NO on different rhodium surfaces (low-index and stepped) and their dependencies on oxygen precoverage reveal that also here a linear Br?nsted-Evans-Polanyi (BEP) relationship exists. The establishment of such a general concept would be of tremendous importance for the development of detailed, elementary-step reaction mechanisms, because the activation energies of reaction steps as well as their coverage dependencies could be estimated based on the adsorption energies calculated by means of DFT.     

Theoretical Studies on Energetic Property and Stability of Pyrazine and Pyridine Derivatives

Density functional calculations at the B3LYP level with 6‐311G** and aug‐cc‐pVDZ basis sets were performed to predict the heats of formation (HOFs) for two pyrazine derivatives and eight pyridine derivatives. In the isodesmic reactions designed for the computation of heats of formation (HOFs), pyrazine and pyridine were chosen as reference compounds. The N‐oxidations for the ring nitrogen of pyrazine and pyridine derivatives decrease the HOF values when N‐oxide oxygen is neighboring with amino groups, but increase when it neighbors with nitro groups. Thermal stability was evaluated via bond dissociation energies (BDE) at the UB3LYP/6‐311G** level. As a whole, the homolysis of C–NO₂ bonds is the main step for bond dissociation of the title compounds. The BDE values of title compounds are influenced by intramolecular hydrogen bonds. The hydrogen bond effects associated with the length of the H···O bonds were analyzed by the electron density at the critical points and natural bond orbital.     

1H, 13C and 15N NMR studies on adducts formation of rhodium(II) tetraacylates with some azoles in CDCl3 solution

Adduct formations of rhodium(II) tetraacetate and tetratrifluoroacetate with some 1H-imidazoles, oxazoles, thiazoles, 1H-pyrazoles and isoxazole have been investigated by the use of 1H, 13C, 15N NMR and electronic absorption spectroscopy (VIS) in the visible range. Azoles tend to form axial adducts containing rhodium(II) tetraacylates bonded via nitrogen atom. Bulky substituents close to the nitrogen atom prevent the Rh--N bond formation, and in several cases switch over the binding site to the oxygen or sulphur atoms. The (15)N adduct formation shift Deltadelta(15N) (Deltadelta = delta(adduct) - delta(ligand)) varied from ca - 40 to - 70 ppm for the nitrogen atom involved in complexation, and of a few parts per million only, from ca - 6 to 3 ppm, for the non-bonded nitrogen atom within the same molecule. The Deltadelta(1H) values do not exceed one ppm; Deltadelta(13C) ranges from - 1 to 6 ppm. Various complexation modes have been proved by electronic absorption spectroscopy in the visible region (VIS). For comparison purposes, some adducts of pyridine, thiophene and furan derivatives have been measured as well. The experimental findings were compared with calculated chemical shifts, obtained by means of DFT B3LYP method, using 6-311 + G(2d,p), 6-31(d)/LanL2DZ and 6-311G(d,p) basis set.     

Nitrous oxide decomposition over Fe-ZSM-5 in the presence of nitric oxide: a comprehensive DFT study

A number of experimental studies have shown recently that ppm-level additions of nitric oxide (NO) enhance the rate of nitrous oxide (N(2)O) decomposition catalyzed by Fe-ZSM-5 at low temperatures. In the present work, the NO-assisted N(2)O decomposition over mononuclear iron sites in Fe-ZSM-5 was studied on a molecular level using density functional theory (DFT) and transition-state theory. A reaction network consisting of over 100 elementary reactions was considered. The structure and energies of potential-energy minima were determined for all stable species, as were the structures and energies of all transition states. Reactions involving changes in spin potential-energy surfaces were also taken into account. In the absence of NO and at temperatures below 690 K, most active single iron sites (Z(-)[FeO](+)) are poisoned by small concentrations of water in the gas phase; however, in the presence of NO, these poisoned sites are converted into a novel active iron center (Z(-)[FeOH](+)). These latter sites are capable of promoting the dissociation of N(2)O into a surface oxygen atom and gas-phase N(2). The surface oxygen atom is removed by reaction with NO or nitrogen dioxide (NO(2)). N(2)O dissociation is the rate-limiting step in the reaction mechanism. At higher temperatures, water desorbs from inactive iron sites and the reaction mechanism for N(2)O decomposition becomes independent of NO, reverting to the reaction mechanism previously reported by Heyden et al. [J. Phys. Chem. B 2005, 109, 1857].     

Infrared-induced reactivity of N2O on small gas-phase rhodium clusters

Far- and mid-infrared multiple photon dissociation spectroscopy has been employed to study both the structure and surface reactivity of isolated cationic rhodium clusters with surface-adsorbed nitrous oxide, Rh(n)N(2)O(+) (n = 4-8). Comparison of experimental spectra recorded using the argon atom tagging method with those calculated using density functional theory (DFT) reveals that the nitrous oxide is molecularly bound on the rhodium cluster via the terminal N-atom. Binding is thought to occur exclusively on atop sites with the rhodium clusters adopting close-packed structures. In related, but conceptually different experiments, infrared pumping of the vibrational modes corresponding with the normal modes of the adsorbed N(2)O has been observed to result in the decomposition of the N(2)O moiety and the production of oxide clusters. This cluster surface chemistry is observed for all cluster sizes studied except for n = 5. Plausible N(2)O decomposition mechanisms are given based on DFT calculations using exchange-correlation functionals. Similar experiments pumping the Rh-O stretch in Rh(n)ON(2)O(+) complexes, on which the same chemistry is observed, confirm the thermal nature of this reaction.     

CH3与NO反应机理的理论研究

采用密度泛函B3LYP/6-311G**和高级电子相关耦合簇CCSD(T)/6-311G**方法计算研究了CH₃与NO反应机理, 全参数优化了反应势能面上各驻点的几何构型, 用内禀反应坐标(IRC)计算和频率分析方法, 对过渡态进行了验证. 研究结果表明: CH₃与NO是一多通道多步骤的复杂反应, 可以分别在单重态和三重态势能面上进行. 经过缔合, 氢转移和离解等复杂过程, 最终得到8种产物(P1～P8).     

Oxygen Atom Exchange Mechanism in Reaction of OH Radical with AsO

IntroductionNitrous acid,HONO,has been extensivelystudied by means of experimental[1,2 ] andtheoretical methods due to its importance inatomspheric chemistry[3 ] . Those studies includedits experimental spectroscopy[1,2 ] and potentialenergy surface with the aid of density functionaltheory[3 ] . Its phosphorus analogue,HOPO,hasbeen studied by virtue of theoreticalcomputations[4] ,and detected in the gas by infraredlaser spectroscopy in2 0 0 0 by Bell and coworkers[5]and matrix isolation in…     

High-energy collisional activation of the molecular ions of thiophene-2-one with different target gases

Collisional activation of keV thiophene-2-one radical cations 1(+*) with O(2) or NO(*) as the target gas leads to a desulfuration reaction. This peculiar reaction is insignificant or absent with other targets such as helium, argon, methane or nitrogen. The radical cations produced in this desulfuration reaction are most probably vinylketene ions, as indicated by a triple mass spectrometric (MS/MS/MS) experiment performed on a 'hybrid' tandem mass spectrometer of sector--quadrupole--sector configuration. Tentatively, it is proposed that population of an excited state accounts for the non-ergodic behavior of 1(+*) upon collision with oxygen or nitric oxide. Ab initio molecular orbital calculations using molecular orbital theory (UMP2, UCCSD(T)) and density functional theory (B3LYP) with 6--31G(d,p) and 6--311++G(d,p) basis sets were used to evaluate the relative energy of the excited quartet state of 1(+*) radical cations. This quartet state is calculated to lie about 3.6 eV above the (2)A(") ground state and 0.9 eV above the C(4)H(4)O(+*)+S dissociation products. It is proposed that the quartet ion serves as the precursor for the spontaneous desulfuration.     

Kinetic Study of Di‐Tert‐Butyl Peroxide: Thermal Decomposition and Product Reaction Pathways

The major reaction path for oxidation of di‐tert‐butyl peroxide (DTBP) is generally considered to occur via fission of the weak peroxide RO? OR bond at temperatures above 393 K. The initial stable intermediates in the thermal decomposition or combustion of DTBP are acetone and ethane, and the overall reaction is accompanied by an important heat release which when mixed with air (oxygen) may exceed the self‐ignition temperatures. A kinetic study on plausible DTBP reaction paths was initiated in this work, and a detailed study of the thermochemistry of new intermediates, transition state structures, and products is reported. The density functional theory (DFT; B3LYP/6‐311g(d,p)), which is practical for large compounds along with the composite ab initio G3MP2B3 and G3 calculations, (when possible), are used. Computational chemistry results from DFT and ab initio calculations are coupled with isodesmic reaction analysis which, as demonstrated in previous studies, results in good accuracy. Over 10 unimolecular decomposition pathways are identified and reported.     

Influence of stoichiometry and charge state on the structure and reactivity of cobalt oxide clusters with CO

Cationic and anionic cobalt oxide clusters, generated by laser vaporization, were studied using guided-ion-beam mass spectrometry to obtain insight into their structure and reactivity with carbon monoxide. Anionic clusters having the stoichiometries Co2O3(-), Co2O5(-), Co3O5(-) and Co3O6(-) were found to exhibit dominant products corresponding to the transfer of a single oxygen atom to CO, indicating the formation of CO 2. Cationic clusters, in contrast, displayed products resulting from the adsorption of CO onto the cluster accompanied by the loss of either molecular O 2 or cobalt oxide units. In addition, collision induced dissociation experiments were conducted with N 2 and inert xenon gas for the anionic clusters, and xenon gas for the cationic clusters. It was found that cationic clusters fragment preferentially through the loss of molecular O 2 whereas anionic clusters tend to lose both atomic oxygen and cobalt oxide units. To further analyze how stoichiometry and ionic charge state influence the structure of cobalt oxide clusters and their reactivity with CO, first principles theoretical electronic structure studies within the density functional theory framework were performed. The calculations show that the enhanced reactivity of specific anionic cobalt oxides with CO is due to their relatively low atomic oxygen dissociation energy which makes the oxidation of CO energetically favorable. For cationic cobalt oxide clusters, in contrast, the oxygen dissociation energies are calculated to be even lower than for the anionic species. However, in the cationic clusters, oxygen is calculated to bind preferentially in a less activated molecular O 2 form. Furthermore, the CO adsorption energy is calculated to be larger for cationic clusters than for anionic species. Therefore, the experimentally observed displacement of weakly bound O 2 units through the exothermic adsorption of CO onto positively charged cobalt oxides is energetically favorable. Our joint experimental and theoretical findings indicate that positively charged sites in bulk-phase cobalt oxides may serve to bind CO to the catalyst surface and specific negatively charged sites provide the activated oxygen which leads to the formation of CO 2. These results provide molecular level insight into how size, stoichiometry, and ionic charge state influence the oxidation of CO in the presence of cobalt oxides, an important reaction for environmental pollution abatement.     

Thermochemical and kinetic analyses on oxidation of isobutenyl radical and 2-hydroperoxymethyl-2-propenyl radical

In recognition of the importance of the isobutene oxidation reaction in the preignition chemistry associated with engine knock, the thermochemistry, chemical reaction pathways, and reaction kinetics of the isobutenyl radical oxidation at low to intermediate temperature range were computationally studied, focusing on both the first and the second O2 addition to the isobutenyl radical. The geometries of reactants, important intermediates, transition states, and products in the isobutenyl radical oxidation system were optimized at the B3LYP/6-311G(d,p) and MP2(full)/6-31G(d) levels, and the thermochemical properties were determined on the basis of ab initio, density functional theory, and statistical mechanics. Enthalpies of formation for several important intermediates were calculated using isodesmic reactions at the DFT and the CBS-QB3 levels. The kinetic analysis of the first O2 addition to the isobutenyl radical was performed using enthalpies at the CBS-QB3 and G3(MP2) levels. The reaction forms a chemically activated isobutenyl peroxy adduct which can be stabilized, dissociate back to reactants, cyclize to cyclic peroxide-alkyl radicals, and isomerize to the 2-hydroperoxymethyl-2-propenyl radical that further undergoes another O2 addition. The reaction channels for isomerization and cyclization and further dissociation on this second O2 addition were analyzed using enthalpies at the DFT level with energy corrections based on similar reaction channels for the first O2 addition. The high-pressure limit rate constants for each reaction channel were determined as functions of temperature by the canonical transition state theory for further kinetic model development.     

Acido-base behavior of hydroxamic acids: experimental and ab initio studies on hydroxyureas

The values of Ka, DeltaSa, and DeltaHa for deprotonation of hydroxyurea (HU) and N-methylhydroxyurea (NMHU), as targeted compounds, and for betainohydroxamic acid, were potentiometrically determined. Although NMHU has two and HU even three deprotonation sites, the measurements confirm that they behave as weak acids with a single pK a approximately 10. Comparison with analogous thermodynamic parameters previously determined for series of monohydroxamic acids reveals deviations from a DeltaSa, vs DeltaHa plot for HU and NMHU, raising the question of the dissociation site of hydroxureas in water. In addition to the deprotonation of the hydroxyl oxygen, ab initio calculations performed at the MP2/6-311++G(d,p) level of theory for these two compounds indicate a notable participation of the nitrogen deprotonation site in HU. The calculations for the isolated, monohydrate, trihydrate, and decahydrate molecular and anionic forms of hydroxyureas support the importance of hydrogen bonding in the gas and aqueous phases. The hydroxylamino nitrogen in HU is the most acidic site in water, contributing approximately 94% to the overall deprotonation process at 25 degrees C. On the contrary, the hydroxylamino oxygen is by far the most favored deprotonation site in NMHU, contributing almost 100% in aqueous medium. The predicted participations of two deprotonation sites in HU, calculated at the MP2/6-311++G(d,p) level of theory, combined with the calculated relative reaction enthalpy and entropy for the deprotonation, satisfactorily explain the observed deviation from linearity of DeltaHa vs DeltaSa, plot. There is no such a simple explanation for acid-base behavior of NMHU.     

Catalytic reactions on neutral Rh oxide clusters more efficient than on neutral Rh clusters

Gas phase catalytic reactions involving the reduction of N(2)O and oxidation of CO were observed at the molecular level on isolated neutral rhodium clusters, Rh(n) (n = 10-28), using mass spectrometry. Sequential oxygen transfer reactions, Rh(n)O(m-1) + N(2)O → Rh(n)O(m) + N(2) (m = 1, 2, 3,…), were monitored and the rate constant for each reaction step was determined as a function of the cluster size. Oxygen extraction reactions by a CO molecule, Rh(n)O(m) + CO → Rh(n)O(m-1) + CO(2) (m = 1, 2, 3,…), were also observed when a small amount of CO was mixed with the reactant N(2)O gas. The rate constants of the oxygen extraction reactions by CO for m ≥ 4 were found to be two or three orders of magnitude higher than the rate constants for m ≤ 3, which indicates that the catalytic reaction proceeds more efficiently when the reaction cycles turn over around Rh(n)O(m) (m ≥ 4) than around bare Rh(n). Rhodium clusters operate as more efficient catalysts when they are oxidized than non- or less-oxidized rhodium clusters, which is consistent with theoretical and experimental studies on the catalytic CO oxidation reaction on a rhodium surface.     

On the pyrolysis mechanism of 2-pyranones and 2-pyranthiones: thermally induced ground electronic state chemistry of pyran-2-thione

[reaction: see text] This work reports studies of thermochemistry of pyran-2-thione (PT), a sulfur derivative of alpha-pyrone (AP). Moderate heating of PT results in scrambling of sulfur and oxygen atoms in the molecule and formation of isomeric thiapyran-2-one (TP). The products of pyrolysis of PT were studied experimentally by a combined use low temperature matrix isolation and Fourier transform infrared spectroscopy. The infrared spectrum of the TP monomer isolated in solid argon at 10 K was completely assigned based on comparison with theoretical calculations undertaken at the DFT(B3LYP)/6-311++G(d,p) level. The upper limit of thermal stability of PT was investigated using the differential scanning calorimetry technique. It was found that pyrolysis of PT is already initiated at temperatures below 130 degrees C. The mechanism of the observed pyrolytical conversion has been studied theoretically at the MP2/6-311++G(d,p) level, in the ground electronic state. The primary step of the pyrolytical reaction in PT is the alpha-cleavage of the C-O single bond. It proceeds via an open-ring thioketene-aldehyde structure, TK1. According to the calculations, the ring-opening reaction from PT to TK1 requires an activation energy less than 80 kJ mol(-1), at 130 degrees C, being the rate-determining step. Further steps of the pyrolytical reaction involve internal rotations around single bonds and [1,5] sigmatropic shift of the aldehydic hydrogen. Pyrolytical ring-opening reactions were studied theoretically also for AP and TP and compared to the pyrolysis of PT. It is suggested that the relative ease of the pyrolytical transformation in PT can be explained in terms of existence of the additional minimum TK1 in the reaction path. No counterparts for this structure could be theoretically located for AP and TP.     

Cyclization-cycloaddition casade of rhodium carbenoids using different carbonyl groups. Highlighting the position of interaction

A series of 3-diazoalkanediones, when treated with a catalytic quantity of a rhodium(II) carboxylate, were found to afford oxabicyclic dipolar cycloadducts derived by the trapping of a carbonyl ylide intermediate. The reaction involves generation of the 1,3-dipole by intramolecular cyclization of the keto carbenoid onto the oxygen atom of the neighboring keto group. Both five- and six-ring carbonyl ylides are formed with the same efficiency. A study of the tandem cyclization-cycloaddition cascade of several alpha-diazo ketoesters was also carried out, and the cascade sequence proceeded in high yield. When the interacting keto carbonyl group was replaced by an imido group, the rhodium(II)-catalyzed reaction proceeded uneventfully. In contrast, alpha-diazo amidoesters do not undergo nitrogen extrusion on treatment with a Rh(II) catalyst. Instead, the diazo portion of the molecule undergoes 1,3-dipolar cycloaddition with various dipolarophiles to give substituted pyrazoles as the final products.     

CH3CH2S自由基H迁移异构化及裂解反应的理论研究

采用密度泛函方法(B3LYP)在6-311+G(d,p)基组水平上研究了CH3CH2S自由基H迁移异构化以及裂解反应的微观动力学机理. 在QCISD(T)/6-311++G(d,p)//B3LYP/6-311+G(d,p)+ZPE水平上进行了单点能校正. 利用经典过渡态理论(TST)与变分过渡态理论(CVT)分别计算了在200~2000 K温度区间内的速率常数kTST和kCVT, 同时获得了经小曲率隧道效应模型(SCT)校正后的速率常数kCVT/SCT. 研究结果表明, CH3CH2S自由基1,2-H迁移、1,3-H迁移、C—C键断裂和β-C—H键断裂反应的势垒ΔE≠分别为149.74, 144.34, 168.79和198.29 kJ/mol. 当温度低于800 K时, 主要发生1,2-H迁移反应, 高于1800 K时, 主要表现为C—C键断裂反应, 在1300—1800 K范围内, 1,3-H迁移反应是优势通道, 在计算的整个温度段内, β-C—H键断裂反应可以忽略.     

Rhodium complex with ethylene ligands supported on highly dehydroxylated MgO: synthesis, characterization, and reactivity

Mononuclear rhodium complexes with reactive olefin ligands, supported on MgO powder, were synthesized by chemisorption of Rh(C(2)H(4))(2)(C(5)H(7)O(2)) and characterized by infrared (IR), (13)C MAS NMR, and extended X-ray absorption fine structure (EXAFS) spectroscopies. IR spectra show that the precursor adsorbed on MgO with dissociation of acetylacetonate ligand from rhodium, with the ethylene ligands remaining bound to the rhodium, as confirmed by the NMR spectra. EXAFS spectra give no evidence of Rh-Rh contributions, indicating that site-isolated mononuclear rhodium species formed on the support. The EXAFS data also show that the mononuclear complex was bonded to the support by two Rh-O bonds, at a distance of 2.18 A, which is typical of group 8 metals bonded to oxide supports. This is the first simple and nearly uniform supported mononuclear rhodium-olefin complex, and it appears to be a close analogue of molecular catalysts for olefin hydrogenation in solution. Correspondingly, the ethylene ligands bonded to rhodium in the supported complex were observed to react with H(2) to form ethane, and the supported complex was catalytically active for the ethylene hydrogenation at 298 K. The ethylene ligands also underwent facile exchange with C(2)D(4), and exposure of the sample to carbon monoxide led to the formation of rhodium gem dicarbonyls.