Natural Convection in a Cavity Filled with Porous Layers on the Top and Bottom Walls

Natural convection in a partially filled porous square cavity is numerically investigated using SIMPLEC method. The Brinkman-Forchheimer extended model was used to govern the flow in the porous medium region. At the porous-fluid interface, the flow boundary condition imposed is a shear stress jump, which includes both the viscous and inertial effects, together with a continuity of normal stress. The thermal boundary condition is continuity of temperature and heat flux. The results are presented with flow configurations and isotherms, local and average Nusselt number along the cold wall for different Darcy numbers from 10⁻¹ to 10⁻⁶, porosity values from 0.2 to 0.8, Rayleigh numbers from 10³ to 10⁷, and the ratio of porous layer thickness to cavity height from 0 to 0.50. The flow pattern inside the cavity is affected with these parameters and hence the local and global heat transfer. A modified Darcy–Rayleigh number is proposed for the heat convection intensity in porous/fluid filled domains. When its value is less than unit, global heat transfer keeps unchanged. The interfacial stress jump coefficients β ₁ and β ₂ were varied from  −1 to +1, and their effects on the local and average Nusselt numbers, velocity and temperature profiles in the mid-width of the cavity are investigated.     

Non-Darcy buoyancy driven flows in a fluid saturated porous medium: the use of asymptotic computational fluid dynamics (ACFD) approach

Natural convection in a fluid saturated porous medium has been numerically investigated using a generalized non-Darcy approach. The governing equations are solved by using Finite Volume approach. First order upwind scheme is employed for convective formulation and SIMPLE algorithm for pressure velocity coupling. Numerical results are presented to study the influence of parameters such as Rayleigh number (10⁶ ≤Ra ≤10⁸), Darcy number (10⁻⁵ ≤ Da ≤ 10⁻²), porosity (0.4 ≤ ɛ ≤ 0.9) and Prandtl number (0.01 ≤ Pr ≤ 10) on the flow behavior and heat transfer. By combining the method of matched asymptotic expansions with computational fluid dynamics (CFD), so called asymptotic computational fluid dynamics (ACFD) technique has been employed to generate correlation for average Nusselt number. The technique is found to be an attractive option for generating correlation and also in the analysis of natural convection in porous medium over a fairly wide range of parameters with fewer simulations for numerical solutions.     

Effect of porous disc receiver configurations on performance of solar parabolic trough concentrator

In this article, heat transfer enhancement of line focus solar collector with porous disc receiver is studied with water and therminol oil. A three dimensional (3-D) numerical simulation of porous disc enhanced receiver is carried out using commercial CFD software Fluent 6.3 to evolve the optimum configuration. The 3-D numerical model is solved by renormalization-group based k-ε turbulent model associated with standard wall function. The effect of porous disc receiver configurations (solid disc at bottom; porous disc at bottom; porous disc at top; and alternative porous disc) on performance of the trough concentrator is investigated. The effect of porous disc geometric parameters (φ, θ, W, H and t) and fluid parameters (Pr and m) on heat transfer enhancement of the receiver is also studied. The numerical simulation results show that the flow pattern around the solid and porous discs are entirely different and it significantly influences the local heat transfer coefficient. The porous disc receiver experiences low pressure drop as compared to that of solid disc receiver due to less obstruction. The optimum configuration of porous disc receiver enhances the heat transfer rate of 221 W m⁻¹ and 13.5% with pumping penalty of 0.014 W m⁻¹ for water and for therminol oil-55, heat transfer rate enhances of 575 W m⁻¹ and 31.4% with pumping penalty of 0.074 W m⁻¹ as compared to that of tubular receiver at the mass flow rate of 0.5 kg s⁻¹. The Nusselt number and friction factor correlations are proposed for porous disc receiver to calculate heat transfer characteristics. The porous disc receiver can be used to increase the performance of solar parabolic trough concentrator.     

Control of Flow and Heat Transfer in a Porous Enclosure due to an Adiabatic Thin fin on the Hot Wall

Natural convection flow in a differentially heated square enclosure filled with porous matrix with a solid adiabatic thin fin attached at the hot left wall is studied numerically. The Brinkman–Forchheimer-extended Darcy model is used to solve the momentum equations, in the porous medium. The numerical investigation is done through streamlines, isotherms, and heat transfer rates. A parametric study is carried out using the following parameters: Darcy number (Da) from 10⁻⁴ to 10⁻², dimensionless thin fin lengths (L _p) 0.3, 0.5, and 0.7, dimensionless positions (S _p) 0.25, 0.5, and 0.75 with Prandtl numbers (Pr) 0.7 and 100 for Ra = 10⁶. For Da = 10⁻³ and Pr = 0.7, it is observed that there is a counter clock-wise secondary flow formation around the tip of the fin for S _p = 0.5 for all lengths of L _p. Moreover when Da = 10⁻² the secondary circulation behavior has been observed for S _p = 0.25 and 0.75 and there is another circulation between the top wall and the fin that is separated from the primary circulation. However, these secondary circulations features are not observed for Pr = 100. It is also found that the average Nusselt number decreases as the length of the fin increases for all locations. However, the rate of decrease of average Nusselt number becomes slower as the location of fin moves from the bottom wall to the top wall. The overall heat transfer rate can be controlled with a suitable selection of the fin location and length.     

Experimental investigation of natural convection heat transfer in horizontal and inclined annular fluid layers

In the present study, an experimental investigation of heat transfer and fluid flow characteristics of buoyancy-driven flow in horizontal and inclined annuli bounded by concentric tubes has been carried out. The annulus inner surface is maintained at high temperature by applying heat flux to the inner tube while the annulus outer surface is maintained at low temperature by circulating cooling water at high mass flow rate around the outer tube. The experiments were carried out at a wide range of Rayleigh number (5 × 10⁴ < Ra < 5 × 10⁵) for different annulus gap widths (L/D _o = 0.23, 0.3, and 0.37) and different inclination of the annulus (α = 0°, 30° and 60°). The results showed that: (1) increasing the annulus gap width strongly increases the heat transfer rate, (2) the heat transfer rate slightly decreases with increasing the inclination of the annulus from the horizontal, and (3) increasing Ra increases the heat transfer rate for any L/D _o and at any inclination. Correlations of the heat transfer enhancement due to buoyancy driven flow in an annulus has been developed in terms of Ra, L/D _o and α. The prediction of the correlation has been compared with the present and previous data and fair agreement was found.     

Convection in a Lid-Driven Heat-Generating Porous Cavity with Alternative Thermal Boundary Conditions

Mixed convection flow in a two-sided lid-driven cavity filled with heat-generating porous medium is numerically investigated. The top and bottom walls are moving in opposite directions at different temperatures, while the side vertical walls are considered adiabatic. The governing equations are solved using the finite-volume method with the SIMPLE algorithm. The numerical procedure adopted in this study yields a consistent performance over a wide range of parameters that were 10⁻⁴ ≤ Da ≤ 10⁻¹ and 0 ≤ Ra _I ≤ 10⁴. The effects of the parameters involved on the heat transfer characteristics are studied in detail. It is found that the variation of the average Nusselt number is non-linear for increasing values of the Darcy number with uniform or non-uniform heating condition.     

Mixed convection from a cylinder oscillating vertically in a quiescent fluid

 The problem of heat convection from a vertically oscillating cylinder in a quiescent fluid is investigated. The governing equations of motion and energy are solved numerically in a non-inertial frame of references to determine the flow field and heat transfer characteristics under different conditions. The main dominating parameters are Keulegan–Carpenter number, KC, frequency parameter, β, Grashof number, Gr and Prandtl number, Pr. The ranges considered for these parameters are KC ≤ 10, β≤40 and Gr ≤ 10⁵ while Prandtl number is kept constant. The study revealed that the effect of amplitude and frequency of oscillation on heat transfer is strongly influenced by the Grashof number range. In the forced convection regime (Gr = 0), the increase of KC creates extensive vortex motion at all cylinder positions that leads to a significant increase in heat transfer. A similar trend, but with a lesser extent, is also observed for the increase of β. However, at high Grashof numbers, the effect of oscillation on heat convection is only significant at large values of KC. Received on 5 June 2000 / Published online: 29 November 2001     

Forced convection of a power-law fluid in a porous channel – numerical solutions

A detailed numerical study of laminar forced convection in a porous channel which contains a fibrous medium saturated with a power-law fluid was performed. Hydrodynamic and heat transfer results are presented for a configuration that has uniform heat flux or uniform temperature heating at the walls. The flow in the porous medium was modeled using the modified Brinkman-Forchheimer-extended Darcy model for power law fluids in which the non-Darcy effects of inertia and boundary were considered. Parametric studies were conducted to examine the effects of Darcy number, power law index, inertia parameter and Prandtl number. The results indicate that when the power law index is decreased, the velocity gradient near the walls increases but these effects are reduced gradually as the Darcy number decreases until the Darcy regime (Da≤10⁻⁶) is reached in which case the effects of power law index become negligible. As the power law index is decreased, the thermal boundary layer thickness decreases significantly only in the non-Darcy regime. Consequently, as the power law index decreases, the fully developed Nusselt number increases considerably in the non-Darcy regime whereas in the Darcy regime the change in Nusselt number is very small. As the Prandtl number increases, the local Nusselt number increases and this effect is more significant for shear thinning fluids (n<1.0). Received on 2 March 1998     

An experimental study on buoyancy-driven convective mass transfer from spheres embedded in saturated porous media

Buoyancy-driven convective mass transfer coefficients from copper spheres embedded saturated porous media have been experimentally obtained. Limiting diffusion current technique based on cathodic reduction of cupric ions is used. The data correspond to high Rayleigh number and, expectedly, exhibit non-Darcian effects. It is found that mass transfer from the spheres embedded in saturated porous media can be predicted by Sh^* _D =5.609Ra^*0.241 _D Da^−0.214, where Ra^* _D and Da are modified Rayleigh number and Darcy's number respectively. Received on 2 March 1999     

Numerical simulation of fluid flow and heat transfer characteristics in channel with V corrugated plates

A detailed numerical study is carried out to investigate fluid flow and heat transfer characteristics in a channel with heated V corrugated upper and lower plates. The parameters studied include the Reynolds number (Re = 2,000–5,500), angles of V corrugated plates (θ = 20°, 40°, 60°), and constant heat fluxs (q″ = 580, 830, 1,090 W/m²). Numerical results have been validated using the experimented data reported by Naphon, and a good agreement has been found. The angles of V corrugated plates (θ) and the Reynolds number are demonstrated to significantly affect the fluid flow and the heat transfer rate. Increasing the angles of V corrugated plates can make the heat transfer performance become better. The increasing Reynolds number leads to a more complex fluid flow and heat transfer rate. The numerical calculations with a non-equilibrium wall function have a better accuracy than with a standard wall function for solving high Reynolds numbers or complex flow problems.     

Oberbeck convection flow of a couple stress fluid through a vertical porous stratum

The flow and heat transfer characteristics of Oberbeck convection of a couple stress fluid in a vertical porous stratum is investigated. The perturbation method of solution is obtained in terms of buoyancy parameter N valid for small values of N. This limitation is relaxed through numerical solutions using the finite difference technique with an error of 0.1×10^-7. The effect of increase in the values of temperature difference between the plates, permeability parameter and couple stress parameter on velocity, temperature, mass flow rate, skin friction and rate of heat transfer are reported. A new achievement is explored to analyse the flow for strong, weak and comparable porosity with the couple stress parameter. It is noted that both the porous parameter and the couple stress parameter suppress the flow. Higher-temperature difference is required to achieve the mass flow rate equivalent to that of viscous flow.     

Finite Element Modelling of Flow Through a Porous Medium Between Two Parallel Plates Using The Brinkman Equation

Despite the widespread use of the Darcy equation to model porous flow, it is well known that this equation is inconsistent with commonly prescribed no slip conditions at flow domain walls or interfaces between different sections. Therefore, in cases where the wall effects on the flow regime are expected to be significant, the Darcy equation which is only consistent with perfect slip at solid boundaries, cannot predict velocity and pressure profiles properly and alternative models such as the Brinkman equation need to be considered. This paper is devoted to the study of the flow of a Newtonian fluid in a porous medium between two impermeable parallel walls at different Darcy parameters (Da). The flow regime is considered to be isothermal and steady. Three different flow regimes can be considered using the Brinkman equation: free flow (Da > 1), porous flow (high permeability, 1 > Da > 10⁻⁶) and porous flow (low permeability Da < 10⁻⁶). In the present work the described bench mark problem is used to study the effects of solid walls for a range of low to high Darcy parameters. Both no-slip and slip conditions are considered and the results of these two cases are compared. The range of the applicability of the Brinkman equation and simulated results for different cases are shown.     

Thermal effects of the micropolar fluid parameters on the laminar free convection in spherical annuli with mixed boundary conditions

The effects of micro-rotation and vortex viscosity in micropolar fluids have been investigated numerically to determine heat transfer by natural convection between concentric and vertically eccentric spheres with specified mixed boundary conditions. Calculations were carried out systematically for several different eccentricities and a range of modified Rayleigh numbers to determine the average Nusslet numbers which are affected by the micropolar parameters (F) of the flow and temperature fields. The skin friction stress on the walls has also been studied and discussed. The governing equations, in terms of vorticity, stream function, temperature and angular momentum are expressed in a spherical polar coordinate system. Results were obtained for steady heat-transfer in spherical annuli at a Prandtl number of 0.7, with the modified Rayleigh number ranging from 10³ to 5 × 10⁵, for a radius ratio of 2.0 and eccentricities varying from −0.625 to +0.625. Comparisons are attempted between the Newtonian fluid and micropolar fluid.     

Experimental investigation of mixed convection in a rectangular duct with a heated plate in the middle of cross section

The flow and heat transfer in an inclined and horizontal rectangular duct with a heated plate longitudinally mounted in the middle of cross section was experimentally investigated. The heated plate and rectangular duct were both made of highly conductive materials, and the heated plate was subjected to a uniform heat flux. The heat transfer processes through the test section were under various operating conditions: Pr ≈ 0.7, inclination angle ϕ = −60° to +60°, Reynolds number Re = 334–1,911, Grashof number Gr = 5.26 × 10²–5.78 × 10⁶. The experimental results showed that the average Nusselt number in the entrance region was 1.6–2 times as large as that in the fully developed region. The average Nusselt numbers and pressure drops increased with the Reynolds number. The average Nusselt numbers and pressure drops decreased with an increase in the inclination angle from −60° to +60° when the Reynolds number was less than 1,500. But when the Reynolds number increased to over about 1,800, the heat transfer coefficients and pressure drops were independent of inclination angles.     

The influence of the continuous phase Pe numbers on thermal wake phenomenon

The reverse of the transfer direction in the unsteady conjugate heat transfer between a spherical particle and a surrounding fluid flow has been analysed. The aspect this work is focused on is the influence of the continuous phase convection on the occurrence and development of this phenomenon. The energy equations are solved by the ADI finite difference method. The range of the Pe numbers investigated is between 0 and 10. The ratios of the thermal conductivity and volume heat capacity between the particle and its ambient flow belong to the interval 0.01–100. It was found that, in creeping flow, the thermal wake occurs at Pe=0.690·10⁻³. Increasing the Pe number up to 1 the dimension of thermal wake increases. For Pe>1, the increase in Pe decreases thermal wake. Received on 13 January 1998     

Transfer model and kinetic characteristics of $${\rm NH}_{4}^{+}$$ –K+ ion exchange on K-zeolite

Based on the mass transfer theory, a new mass transfer model of ion-exchange process on zeolite under liquid film diffusion control is established, and the kinetic curves and the mass transfer coefficients of –K⁺ ion-exchange under different conditions were systemically determined using the shallow-bed experimental method. The results showed that the –K⁺ ion-exchange rates and transfer coefficients are directly proportional to solution flow rate and temperature, and inversely proportional to solution viscosity and the size of zeolite granules. It also showed that the transfer coefficient is not influenced by the ion concentrations. For a large ranges of operational conditions including temperatures (10 − 75°C), flow rates (0.031 m s⁻¹ −0.26 m s⁻¹), liquid viscosities (1.002 × 10⁻³ N s m⁻² − 4.44 × 10⁻³ N s m⁻²), and zeolite granular sizes (0.2 − 1.45 mm), the average mass transfer coefficients calculated by the model agree with the experimental results very well.     

A numerical method for forced convection in porous and homogeneous fluid domains coupled at interface by stress jump

A numerical method was developed for flows involving an interface between a homogeneous fluid and a porous medium. It is based on the finite volume method with body‐fitted and multi‐block grids. The Brinkman–Forcheimmer extended model was used to govern the flow in the porous medium region. At its interface, the flow boundary condition imposed is a shear stress jump, which includes the inertial effect, together with a continuity of normal stress. The thermal boundary condition is continuity of temperature and heat flux. The forced convection through a porous insert over a backward‐facing step is investigated. The results are presented with flow configurations for different Darcy numbers, 10^?2 to 10^?5, porosity from 0.2 to 0.8, Reynolds number from 10 to 800, and the ratio of insert length to channel height from 0.1 to 0.3. The heat transfer is improved by using porous insert. To enhance the heat transfer with minimal frictional losses, it is preferable to have a medium length of insert with medium Darcy number, and larger Reynolds number. The interfacial stress jump coefficients β and β₁ were varied from ?1 to 1, and within this range the average and local lower‐wall Nusselt numbers are not sensitive to the parameters. Copyright © 2007 John Wiley & Sons, Ltd.     

Laminar mixed convection from a continuously moving vertical surface with suction or injection

The boundary layer flow over a uniformly moving vertical surface with suction or injection is studied when the buoyancy forces assist or oppose the flow. Similarity solutions are obtained for the boundary layer equations subject to power law temperature and velocity boundary conditions. The effect is of various governing parameters, such as Prandtl number Pr, temperature exponent n, injection parameter d, and the mixed convection parameter λ=Gr/Re², which determine the velocity and temperature distributions and the heat transfer coefficient, are studied. The heat transfer coefficient increases as λ assisting the flow for all d at Pr=0.72 however, for n=−1 it decreases sharply with λ. On the other hand, increasing λ has no effect on heat transfer coefficient for Pr=10 at n=0, and 1 for almost all values of d studied. However, for n=−1 it has similar effect as for Pr=0.72. It is also found that Nusselt number increases as n increases for fixed λ and d. Received on 26 March 1997     

Numerical Simulation of Thermal and Concentration Natural Convection in a Porous Cavity in the Presence of an Opposing Flow

Two-dimensional steady-state thermal concentration convection in a rectangular porous cavity is simulated numerically. The temperature and concentration gradients are horizontal and the buoyancy forces act either in the same or in opposite directions. The flow through the porous medium is described by the Darcy-Brinkman or Forchheimer equations. The SIMPLER numerical algorithm based on the finite volume approach is used for solving the problem in the velocity-pressure variables.Numerous series of calculations were carried out over the range Ra _t =3·10⁶ and 3·10⁷, 10^-6 < Da < 1, 1 < N < 20, Le=10 and 100, where Ra, Da, Le, and N are the Rayleigh, Darcy, and Lewis numbers and the buoyancy ratio, respectively. It is shown that the main effect of the presence of the porous medium is to reduce the heat and mass transfer and attenuate the flow field with decrease in permeability. For a certain combination of the Ra, Le, and N numbers the flow has a multicellular structure. The mean Nusselt and Sherwood numbers are presented as functions of the governing parameters.     

Influence of Density Inversion on Thawing Around a Cylinder in a Frozen Saturated Porous Medium

An analytical study is made of the convective flow field produced when a warm cylinder maintained at a fixed temperature above freezing is buried in saturated frozen porous medium. The flow field is shown to have a double cell pattern due to the density inversion of water at ~ 4°C, with downward convection of heat dominating at cylinder temperatures of below ~ 10°C and upward heat convection dominating at temperatures greater than this. The analysis uses a perturbation technique to determine the first-order convective correction to the flow and temperature fields around the cylinder for a quasi-static case. It demonstrates that the porous medium permeability and the cylinder temperature are the dominant factors in determining the point at which convection heat transfer becomes significant, with convection expected to be insignificant for Darcy permeabilies lower than 10⁻⁵ m/s. The analysis also gives an indication of the rates of thawing occurring in different directions without resorting to numerical methods. The practical implications of a thawing pattern significantly different to that predicted by conduction theory only are discussed briefly with respect to the problem of differential thaw settlement of arctic pipelines.