Distal metal effects in cobalt porphyrins related to CcO

Cobalt(II) porphyrins were studied to determine the influence of distal site metalation and superstructure upon dioxygen reactivity in active site models of cytochrome c oxidase (CcO). Monometallic, Co(II)(P) complexes when ligated by an axial imidazole react with dioxygen to form reversible Co-superoxide adducts, which were characterized by EPR and resonance Raman (RR). Unexpectedly, certain Co porphyrins with Cu(I) metalated imidazole pickets do not form mu-peroxo Co(III)/Cu(II) products even though the calculated intermetallic distance suggests this is possible. Instead, cobalt-porphyrin-superoxide complexes are obtained with the distal copper remaining as Cu(I). Moreover, distal metals (Cu(I) or Zn(II)) greatly enhance the stability of the dioxygen adduct, such that Co superoxides of bimetallic complexes demonstrate minimal reversibility. The "trapping" of dioxygen by a second metal is attributed to structural and electrostatic changes within the distal pocket upon metalation. EPR evidence suggests that the terminal oxygen in these bimetallic Co-superoxide systems is H-bonded to the NH of an imidazole picket amide linker, which may contribute to enthalpic stabilization of the dioxygen adduct. Stabilization of the dioxygen adduct in these bimetallic systems suggests one possible role for the distal copper in the Fe/Cu bimetallic active site of terminal oxidases, which form a heme-superoxide/copper(I) adduct upon oxygenation.     

Galactose oxidase models: solution chemistry, and phenoxyl radical generation mediated by the copper status

Galactose oxidase (GO) is an enzyme that catalyzes two-electron oxidations. Its active site contains a copper atom coordinated to a tyrosyl radical, the biogenesis of which requires copper and dioxygen. We have recently studied the properties of electrochemically generated mononuclear Cu(II)-phenoxyl radical systems as model compounds of GO. We present here the solution chemistry of these ligands under various copper and dioxygen statuses: N(3)O ligands first chelate Cu(II), leading, in the presence of base, to [Cu(II)(ligand)(CH(3)CN)](+) complexes (ortho-tert-butylated ligands) or [(Cu(II))(2)(ligand)(2)](2+) complexes (ortho-methoxylated ligands). Excess copper(II) then oxidizes the complex to the corresponding mononuclear Cu(II)-phenoxyl radical species. N(2)O(2) tripodal ligands, in the presence of copper(II), afford directly a copper(II)-phenoxyl radical species. Addition of more than two molar equivalents of copper(II) affords a Cu(II)-bis(phenoxyl) diradical species. The donor set of the ligand directs the reaction towards comproportionation for ligands possessing an N(3)O donor set, while disproportionation is observed for ligands possessing an N(2)O(2) donor set. These results are discussed in the light of recent results concerning the self-processing of GO. A path involving copper(II) disproportionation is proposed for oxidation of the cross-linked tyrosinate of GO, supporting the fact that both copper(I) and copper(II) activate the enzyme.     

Dioxygen reactivity of new bispidine-copper complexes

The reactivity of copper complexes of three different second-generation bispidine-based ligands (bispidine = 3,7-diazabicyclo[3.3.1]nonane; mono- and bis-tetradentate; exclusively tertiary amine donors) with dioxygen [(reversible) binding of dioxygen by copper(I)] is reported. The UV-vis, electrospray ionization mass spectrometry, electron paramagnetic resonance, and vibrational spectra (resonance Raman) of the dioxygen adducts indicate that, depending on the ligand and reaction conditions, several different species (mono- and dinuclear, superoxo, peroxo, and hydroperoxo), partially in equilibrium with each other, are formed. Minor changes in the ligand structure and/or experimental conditions (solvent, temperature, relative concentrations) allow switching between the different forms. With one of the ligands, an end-on peroxodicopper(II) complex and a mononuclear hydroperoxocopper(II) complex could be characterized. With another ligand, reversible dioxygen binding was observed, leading to a metastable superoxocopper(II) complex. The amount of dioxygen involved in the reversible binding to Cu(I) was determined quantitatively. The mechanism of dioxygen binding as well as the preference of each of the three ligands for a particular dioxygen adduct is discussed on the basis of a computational (density functional theory) analysis.     

Reversible Coordination of Dioxygen by Tripodal Tetraamine Copper Complexes Incorporated in a Porous Silica Framework

The present study reports the synthesis and rational design of porous structured materials by using a templating method. A tetraethoxysilylated tripodal tetraamine (TREN) was covalently incorporated in a silica framework with a double imprint: A surfactant template and a metal ion imprint. The presence of a cationic surfactant (CTAB) endowed the material with a high porosity, and the tripodal or square‐pyramidal topology of the ligand was preserved thanks to the use of the silylated Cu^II complex. After removal of the surfactant and de‐metalation, the incorporated tetraamine was quantitatively complexed by CuCl₂ and the material has shown after thermal activation that a reversible binding of O₂ on the metal ions occurred. This chemisorption process was monitored by UV/Vis and EPR spectroscopies, and the Cu:O₂ adduct was postulated to be an end‐on μ‐η¹:η¹‐peroxodicopper(II) complex bridged by a chloride ion. The Cu^I‐active species, formed during the activation step, were fully recovered during several O₂ binding cycles. The high reactivity of the copper complexes and the room‐temperature stability of the dioxygen adduct were explained by the fine adaptability of the tripodal ligand to different geometries, the confinement of the active sites in the hybrid silica that protect them from degradation by a control of the metal‐ion microenvironment, as well as the short‐range lamellar order of the copper complexes in the framework.     

Oxygen binding and activation by the complexes of PY2- and TPA-appended diphenylglycoluril receptors with copper and other metals

The copper(I) complexes of diphenylglycoluril basket receptors and , appended with bis(2-ethylpyridine)amine (PY2) and tris(2-methylpyridine)amine (TPA), respectively, and their dioxygen adducts were studied with low-temperature UV-vis and X-ray absorption spectroscopy (XAS). The copper(I) complex of, [.Cu(I)2] or, forms a micro-eta2:eta2 dioxygen complex, whereas the copper(I) complex of, [.Cu(I)2] or, does not form a well defined dioxygen complex, but is oxidized to Cu(II). Dioxygen is bound irreversibly to and the formed complex is stable over time. The coordination geometries of the above complexes were determined by XAS, which revealed that pyridyl groups and amine N-donors participate in the coordination to Cu(I) ions in the complexes of both receptors. The catalytic activities of various metal complexes of and , that were designed as mimics of dinuclear copper enzymes that can activate dioxygen, were investigated. Phenolic substrates that were expected to undergo aromatic hydroxylation, showed oxidative polymerization without insertion of oxygen. The mechanism of this polymerization turns out to be a radical coupling reaction as was established by experiments with the model substrate 2,4-di-tert-butylphenol. In addition to Cu(II), the Mn(III) complex of and the Fe(II) complex of were tested as oxidation catalysts. Oxidation of catechol was observed for the Cu(II) complex of receptor but the other metal complexes did not lead to oxidation.     

A new dinuclear heme-copper complex derived from functionalized protoporphyrin IX

A new biomimetic model for the heterodinuclear heme/copper center of respiratory oxidases is described. It is derived from iron(III) protoporphyrin IX by covalent attachment of a Gly-L-His-OMe residue to one propionic acid substituent and an amino-bis(benzimidazole) residue to the other propionic acid substituent of the porphyrin ring, yielding the Fe(III) complex 1, and subsequent addition of a copper(II) or copper(I) ion, according to needs. The fully oxidized Fe(III)/Cu(II) complex, 2, binds azide more strongly than 1, and likely contains azide bound as a bridging ligand between Fe(III) and Cu(II). The two metal centers also cooperate in the reaction with hydrogen peroxide, as the peroxide adducts obtained at low temperature for 1 and 2 display different optical features. Support to this interpretation comes from the investigation of the peroxidase activity of the complexes, where the activation of hydrogen peroxide has been studied through the phenol coupling reaction of p-cresol. Here the presence of Cu(II) improves the catalytic performance of complex 2 with respect to 1 at acidic pH, where the positive charge of the Cu(II) ion is useful to promote O-O bond cleavage of the iron-bound hydroperoxide, but it depresses the activity at basic pH because it can stabilize an intramolecular hydroxo bridge between Fe(III) and Cu(II). The reactivity to dioxygen of the reduced complexes has been studied at low temperature starting from the carbonyl adducts of the Fe(II) complex, 3, and Fe(II)/Cu(I) complex, 4. Also in this case the adducts derived from the Fe(II) and Fe(II)/Cu(I) complexes, that we formulate as Fe(III)-superoxo and Fe(III)/Cu(II)-peroxo exhibit slightly different spectral properties, showing that the copper center participates in a weak interaction with the dioxygen moiety.     

Mononuclear-dinuclear equilibrium of grafted copper complexes confined in the nanochannels of MCM-41 silica

Following the structural concept of copper-containing proteins in which dinuclear copper centers are connected by hydroxide bridging ligands, a bidentate copper(II) complex has been incorporated into nano-confined MCM-41 silica by a multistep sequential grafting technique. Characterization by a combination of EPR spectroscopy, X-ray photoelectron spectroscopy (XPS), UV/Vis spectroscopy, IR spectroscopy , and solid-state (13)C and (29)Si cross-polarization magic-angle spinning (CP-MAS) NMR suggests that dinuclear Cu complexes are bridged by hydroxide and other counterions (chloride or perchlorate ions), similar to the situation for EPR-undetectable [Cu(II)···Cu(II)] dimer analogues in biological systems. More importantly, a dynamic mononuclear-dinuclear equilibrium between different coordination modes of copper is observed, which strongly depends on the nature of the counterions (Cl(-) or ClO(4)(-)) in the copper precursor and the pore size of the silica matrix (the so-called confinement effect). A proton-transfer mechanism within the hydrogen-bonding network is suggested to explain the dynamic nature of the dinuclear copper complex supported on the MCM-41 silica.     

Dioxygen activation of a trinuclear Cu(I)Cu(I)Cu(I) cluster capable of mediating facile oxidation of organic substrates: competition between O-atom transfer and abortive intercomplex reduction

The dioxygen activation of a series of Cu(I)Cu(I)Cu(I) complexes based on the ligands (L) 3,3'-(1,4-diazepane- 1,4-diyl)bis(1-{[2-(dimethylamino)ethyl](methyl)amino}propan-2-ol)(7-Me) or 3,3'-(1,4-diazepane-1,4-diyl)bis(1-{[2-(diethylamino)ethyl](ethyl)amino}propan-2-ol)(7-Et) forms an intermediate capable of mediating facile O-atom transfer to simple organic substrates at room temperature. To elucidate the dioxygen chemistry, we have examined the reactions of 7-Me, 7-Et, and 3,3'-(1,4-diazepane-1,4-diyl)bis[1-(4-methylpiperazin-1-yl)propan-2-ol] (7-N-Meppz) with dioxygen at -80, -55, and -35?°C in propionitrile (EtCN) by UV-visible, 77?K EPR, and X-ray absorption spectroscopy, and 7-N-Meppz and 7-Me with dioxygen at room temperature in acetonitrile (MeCN) by diode array spectrophotometry. At both -80 and -55?°C, the mixing of the starting [Cu(I)Cu(I)Cu(I)(L)](1+) complex (1) with O(2)-saturated propionitrile (EtCN) led to a bright green solution consisting of two paramagnetic species: the green dioxygen adduct [Cu(II)Cu(II)(μ-η(2):η(2)-peroxo)Cu(II)(L)](2+) (2) and the blue [Cu(II)Cu(II)(μ-O)Cu(II)(L)](2+) species (3). These observations are consistent with the initial formation of [Cu(II)Cu(II)(μ-O)(2)Cu(III)(L)](1+)(4), followed by rapid abortion of this highly reactive species by intercluster electron transfer from a second molecule of complex 1 to give the blue species 3 and subsequent oxygenation of the partially oxidized [Cu(II)Cu(I)Cu(I)(L)](2+)(5) to form the green dioxygen adduct 2. Assignment of 2 to [Cu(II)Cu(II)(μ-η(2):η(2)-peroxo)Cu(II)(L)](2+) is consistent with its reactivity with water to give H(2)O(2) and the blue species 3, as well as its propensity to be photoreduced in the X-ray beam during X-ray absorption experiments at room temperature. In light of these observations, the development of an oxidation catalyst based on the tricopper system requires consideration of the following design criteria: 1)?rapid dioxygen chemistry; 2)?facile O-atom transfer from the activated cluster to substrate; and 3)?a suitable reductant to rapidly regenerate complex 1 to accomplish efficient catalytic turnover.     

A stabilized mu-eta(2):eta(2) peroxodicopper(II) complex with a secondary diamine ligand and its tyrosinase-like reactivity

The activation of dioxygen (O(2)) by Cu(I) complexes is an ubiquitous process in biology and industrial applications. In tyrosinase, a binuclear copper enzyme, a mu-eta(2):eta(2)-peroxodicopper(II) species is generally accepted to be the active oxidant. Reported here is the characterization and reactivity of a stable mu-eta(2):eta(2)-peroxodicopper(II) complex at -80 degrees C using a secondary diamine ligand, N,N'-di-tert-butyl-ethylenediamine (DBED). The spectroscopic characteristics of this complex (UV-vis, resonance Raman) prove to be strongly dependent on the counteranion employed and not on the solvent, suggesting an intimate interaction of the counteranions with the Cu-O(2) cores. This interaction is also supported by solution EXAFS data. This new complex exhibits hydroxylation reactivity by converting phenolates to catechols, proving to be a functional model of tyrosinase. Additional interest in this Cu/O(2) species results from the use of Cu(I)-DBED as a polymerization catalyst of phenols to polyphenylene oxide (PPO) with O(2) as the terminal oxidant.     

Identification of a copper(I) intermediate in the conversion of 1-aminocyclopropane carboxylic acid (ACC) into ethylene by Cu(II)-ACC complexes and hydrogen peroxide

Several Cu(II) complexes with ACC (=1-aminocyclopropane carboxylic acid) or AIB (=aminoisobutyric acid) were prepared using 2,2'-bipyridine, 1,10-phenanthroline, and 2-picolylamine ligands: [Cu(2,2'-bipyridine)(ACC)(H2O)](ClO4) (1a), [Cu(1,10-phenanthroline)(ACC)](ClO4) (2a), [Cu(2-picolylamine)(ACC)](ClO4) (3a), and [Cu(2,2'-bipyridine)(AIB)(H2O)](ClO4) (1b). All of the complexes were characterized by X-ray diffraction analysis. The Cu(II)-ACC complexes are able to convert the bound ACC moiety into ethylene in the presence of hydrogen peroxide, in an "ACC-oxidase-like" activity. A few equivalents of base are necessary to deprotonate H2O2 for optimum activity. The presence of dioxygen lowers the yield of ACC conversion into ethylene by the copper(II) complexes. During the course of the reaction of Cu(II)-ACC complexes with H2O2, brown species (EPR silent and lambda max approximately 435 nm) were detected and characterized as being the Cu(I)-ACC complexes that are obtained upon reduction of the corresponding Cu(II) complexes by the deprotonated form of hydrogen peroxide. The geometry of the Cu(I) species was optimized by DFT calculations that reveal a change from square-planar to tetrahedral geometry upon reduction of the copper ion, in accordance with the observed nonreversibility of the redox process. In situ prepared Cu(I)-ACC complexes were also reacted with hydrogen peroxide, and a high level of ethylene formation was obtained. We propose Cu(I)-OOH as a possible active species for the conversion of ACC into ethylene, the structure of which was examined by DFT calculation.     

Effects of thioether substituents on the O2 reactivity of beta-diketiminate-Cu(I) complexes: probing the role of the methionine ligand in copper monooxygenases

The activation of dioxygen by dopamine beta-monooxygenase (DbetaM) and peptidylglycine alpha-hydroxylating monooxygenase (PHM) is postulated to occur at a copper site ligated by two histidine imidazoles and a methionine thioether, which is unusual because such thioether ligation is not present in other O2-activating copper proteins. To assess the possible role of the thioether ligand in O2 activation by DbetaM and PHM, two new ligands comprising beta-diketiminates with thioether substituents were synthesized and Cu(I) and Cu(II) complexes were isolated. The Cu(II) compounds are monomeric and exhibit intramolecular thioether coordination. While the Cu(I) complexes exhibit a multinuclear topology in the solid state, variable-temperature 1H NMR studies implicate equilibria in solution, possibly including monomers with intramolecular thioether coordination that are structurally defined by DFT calculations. Low-temperature oxygenation of solutions of the Cu(I) complexes generates stable 1:1 Cu/O2 adducts, which on the basis of combined experimental and theoretical studies adopt side-on "eta(2)" structures with negligible Cu-thioether bonding and significant peroxo-Cu(III) character. In contrast to previously reported findings with related ligands lacking the thioether group, however (cf., Aboelella; et al. J. Am. Chem. Soc. 2004, 126, 16896), purging the solutions of the thioether-containing adducts with argon results in conversion to bis(mu-oxo)dicopper(III) species. A role for the thioether in promoting loss of O2 from the 1:1 Cu/O2 adduct and facilitating trapping of the resulting Cu(I) complex to yield the bis(mu-oxo) species is proposed, and the possible relevance of this role to that of the methionine in the active sites of DbetaM and PHM is discussed.     

Modeling Tyrosinase Monooxygenase Activity. Spectroscopic and Magnetic Investigations of Products Due to Reactions between Copper(I) Complexes of Xylyl-Based Dinucleating Ligands and Dioxygen: Aromatic Ring Hydroxylation and Irreversible Oxidation Products

A full account of a chemical system possessing features that mimic the reactivity aspects of tyrosinase is presented. Using dinucleating ligands with a m-xylyl spacer three new dicopper(I) complexes have been synthesized and their reactivity with dioxygen investigated. The six-membered chelate ring forming ligands provide only two nitrogen coordinations to each copper. The complexes [Cu(I)(2)L(CH(3)CN)(2)]X(2) (X = ClO(4)(-) (1a), SbF(6)(-) (1b)) and [Cu(I)(2)(L-NO(2))(CH(3)CN)(2)][SbF(6)](2) (1c) [L = alpha,alpha'-bis[N-methyl-N-(2-pyridylethyl)amino]-m-xylene; L-NO(2) = para-nitro derivative of L] have been characterized by IR and (1)H NMR spectroscopy. The reaction of O(2) with 1a-c in CH(2)Cl(2) or THF is instantaneous and causes stoichiometric xylyl hydroxylation reactions producing phenol products. Thus 1a produces phenoxo-/hydroxo-bridged product [Cu(II)(2)(L-O)(OH)][ClO(4)](2) (2a). The existence of putative peroxo-dicopper(II) species could not be detected even at -80 degrees C. A trend is observed for the extent of aromatic ring hydroxylation (298 K): CH(3)CN approximately DMF > CH(3)OH > CH(2)Cl(2). Cyclic voltammetric experiment of 1a in DMF reveals an appreciably low redox potential (E(1/2) = -0.26 V vs SCE) for the Cu(II)(2)/Cu(I)(2) redox process. Variable-temperature (25-300 K) magnetic susceptibility measurements establish that the copper(II) centers in 2a and the dihydroxo-bridged complex [Cu(II)(2)L'(OH)(2)][ClO(4)](2) (2b) [formed due to an impurity (L') present during the synthesis of L following Method A; L' = bis[alpha,alpha'-bis(N-methyl-N-(2-pyridylethyl)amino)-m-xylene]methylamine] are antiferromagnetically coupled, with 2a considerably more coupled than 2b. Reaction of 1a with O(2) in CH(2)Cl(2) (298 K) produces an additional unhydroxylated product of composition [Cu(II)(2)L(OH)(OH(2))][ClO(4)](3).2H(2)O.0.5HCl (3a). In agreement with its proposed hydroxo-/aquo-bridged structure, 3a is weakly antiferromagnetically coupled. In CH(3)CN solution, 3a rearranges to generate a doubly hydroxo-bridged species [Cu(II)(2)L(OH)(2)](2+). Using a solution-generated dicopper(I) complex of a closely similar ligand (L' ') providing five-membered chelate ring, the reactivity toward dioxygen was also investigated. It produces only an irreversibly oxidized product of composition Cu(II)(2)L' '(OH)(ClO(4))(3)(H(2)O)(2) (3b) (L' ' = alpha,alpha'-bis[N-methyl-N-(2-pyridylmethyl)amino]-m-xylene). For 3b the copper(II) centers are almost uncoupled.     

Valence tautomerism and metal-mediated catechol oxidation for complexes of copper prepared with 9,10-phenanthrenequinone

Bis(pyridine)(9,10-phenanthrenequinone)(9,10-phenanthrenediolato)copper(II), Cu(py)(2)(PhenCat)(PhenBQ), has been prepared by treating copper metal with 9,10-phenanthrenequinone in pyridine solution. In dilute solution, both Cu(py)(2)(PhenCat)(PhenBQ) and the related complex Cu(tmeda)(PhenCat)(PhenBQ) lose PhenBQ to form Cu(II)L(2)(PhenCat), where L(2)= tmeda, 2 py. EPR spectra recorded at temperatures between 300 and 77 K reveal the presence of species with radical and metal localized spins together at equilibrium. Equilibria between Cu(II)L(2)(PhenCat) and Cu(I)L(2)(PhenSQ) redox isomers are solvent dependent, with a shift to higher temperature for polar solvents. Both complexes are oxygen sensitive, reacting with dioxygen to give complexes of diphenic acid. Structural characterization on products obtained with tmeda show that dioxygen insertion across the C-C bond within the chelate ring leads to dimeric products with adjacent Cu(II) ions bridged by diphenate ligands. The addition of O(2) to Cu(tmeda)(PhenCat) in acetonitrile solution at 0 degrees C appears to form a peroxo complex, tentatively identified as Cu(tmeda)(O(2))(PhenQ) on the basis of iodometric titration, as the precursor to the diphenate complex.     

Fine-tuning of properties of bismacrocyclic dinuclear cyclidene receptors by N-methylation

N-Methylated bismacrocyclic Cu and Ni complexes were synthesised and structurally characterised in the solid state. Their properties in solution were analysed by using NMR and ESR spectroscopies and electrochemical methods. Face-to-face biscyclidenes linked through polymethylene chains form rectangular boxlike cations. These moieties can host some small guest molecules (water, pi-electron donating compounds) and are stabilised by a shell of neighbouring counterions. For the bismacrocyclic dinuclear complexes containing two nickel or two copper ions, the intramolecular interactions between the metallic centres are strengthened through methylation of the macrocyclic components, as compared with the nonmethylated species. We report the electron coupling created by two unpaired electrons coming from two copper centres observed by ESR spectroscopy. Methylation weakens the electron-acceptor properties of the complexes, which leads to less effective binding of the pi-electron-donating guests. It also increases the stability of the lower oxidation states. In the case of the copper complexes, both Cu(II)/Cu(I) and Cu(II)/Cu(III) reversible one-electron transfers are seen in the voltammograms. These changes in properties are interpreted as the consequences of steric repulsion between the methyl substituents and the macrocyclic ring.     

Mononuclear copper(II)-hydroperoxo complex derived from reaction of copper(I) complex with dioxygen as a model of DbetaM and PHM

A mononuclear copper(II)-hydroperoxo species has been generated by the reaction of Cu(I)-H2BPPA complex with dioxygen, which illustrates the enzymatic reaction process of the CuB site in the DbetaM and PHM.     

Synthesis of Cu(II)-containing TiO2-SiO2 binary xerogels by hydrolysis of a mixture of tetrabutoxytitanium, tetraethoxysilane, and copper(II) chloride in a water-ammonia atmosphere

A Cu(II)-containing binary xerogel TiO₂-SiO₂ was synthesized by joint hydrolysis of tetrabutoxytitanium, teraethoxysilane and copper(II) chloride dissolved in their mixture. The synthesis was performed in a vapor of 10% aqueous ammonia under static conditions. EPR spectroscopy was used to examine the state of Cu(II) in the xerogel matrix. Data on specific features of the behavior of saccharose within xerogel pores under heating were obtained. The catalytic activity of the xerogel was tested by the kinetic method on model reactions of hydrogen peroxide decomposition and oxidative dehydrogenation of trimethylhydroquinone.     

mu-eta2:eta2-peroxodicopper(II) complex with a secondary diamine ligand: a functional model of tyrosinase

The activation of dioxygen (O(2)) by Cu(I) complexes is an important process in biological systems and industrial applications. In tyrosinase, a binuclear copper enzyme, a mu-eta(2):eta(2)-peroxodicopper(II) species is accepted generally to be the active oxidant. Reported here is the characterization and reactivity of a mu-eta(2):eta(2)-peroxodicopper(II) complex synthesized by reacting the Cu(I) complex of the secondary diamine ligand N,N'-di-tert-butyl-ethylenediamine (DBED), [(DBED)Cu(MeCN)](X) (1.X, X = CF(3)SO(3)(-), CH(3)SO(3)(-), SbF(6)(-), BF(4)(-)), with O(2) at 193 K to give [[Cu(DBED)](2)(O(2))](X)(2) (2.X(2)). The UV-vis and resonance Raman spectroscopic features of 2 vary with the counteranion employed yet are invariant with change of solvent. These results implicate an intimate interaction of the counteranions with the Cu(2)O(2) core. Such interactions are supported further by extended X-ray absorption fine structure (EXAFS) analyses of solutions that reveal weak copper-counteranion interactions. The accessibility of the Cu(2)O(2) core to exogenous ligands such as these counteranions is manifest further in the reactivity of 2 with externally added substrates. Most notable is the hydroxylation reactivity with phenolates to give catechol and quinone products. Thus the strategy of using simple bidentate ligands at low temperatures provides not only spectroscopic models of tyrosinase but also functional models.     

Redox-triggered molecular movement in a multicomponent metal complex in solution and in the solid state

The Cu(I) and Cu(II) complexes of the new 1,8-diferro-cenylmethyl-4,11-dimethyl-1,4,8,11-tetraazacyclotetra-decane ligand (denoted L) have been isolated and characterized by X-ray structure determination and electrochemical studies. The Cu(I) complex presents an unprecedented stability toward dioxygen. The two complexes adopt two energetically distinct and stable geometries, which differ mainly by the relative positioning of the substituents above or below the cyclam plane. Triggered by a copper-centered electron transfer, a fast and reversible motion of the noncoordinating subunits is obtained in homogeneous solution and in the solid state.     

Cyclic voltammetric studies of copper(II) amino acid complexes: electrochemical evidence for the generation of copper(I) complex as an intermediate

The reduction of the title complexes is studied by cyclic voltammetry in aqueous media. It proceeds through a one-electron process generating the corresponding copper(I) amino acid complexes. The reduced copper(I) species undergo chemical reactions generating Cu(O) at the mercury electrode. The unreacted fraction of the copper(I) species is re-oxidised to the copper(II) complexes. The Cu(O) generated undergo a two-electron oxidation to Cu²⁺ at less cathodic potentials which get reduced to Cu(O) subsequently. pH-dependence of these complexes is also investigated.     

Novel cyano-bridged mixed-valent copper complexes formed by completely in situ synthetic method via the cleavage of C-C bond in acetonitrile

A series of novel cyano-bridged mixed-valent copper complexes with different nuclearities, where the cyanide group is obtained from the cleavage of a carbon-carbon (C-C) bond in acetonitrile under mild conditions, have been prepared and structurally characterized via a completely in situ synthetic method. The method is catalyzed by 2,2'-bipyridine and 1,10-phenanthroline-based Cu(II) complexes in the presence of certain reductants, such as aryl aldehydes or pyridyl amines. This work provides a facile in situ synthetic method to prepare mixed-valent cyano-bridged multinuclear complexes having novel Cu(II)(CN)Cu(I)(CN)Cu(II) and Cu(II)(CN)Cu(I)(CN)Cu(I)(CN)Cu(II) units and avoids using toxic cyanides. In addition, our preliminary studies demonstrate that the mixed-valent trinuclear copper complexes can effectively catalyze the oxidation of benzaldehyde by peroxide.