共查询到20条相似文献,搜索用时 109 毫秒
1.
2.
N掺杂TiO_2纳米粒子表面光生电荷特性与光催化活性 总被引:2,自引:0,他引:2
以尿素为氮源,采用水热法制备了不同N掺杂量的TiO2(N-TiO2)光催化剂.利用X射线衍射(XRD),紫外-可见漫反射光谱(UV-Vis DRS),X射线光电子能谱(XPS)及荧光(PL)光谱等技术对其进行了系统的表征.以罗丹明B(RhB)和甲基橙(MO)溶液的脱色降解为模型反应,分别考察了N-TiO2光催化剂在紫外和可见光区的光催化活性.利用表面光伏(SPV)和瞬态光伏(TPV)技术研究了N-TiO2纳米粒子表面光生电荷的产生和传输机制,并探讨了光生电荷与光催化活性之间的关系.结果显示,随着N含量的增大,TiO2表面光伏响应阈值红移,可见光部分光电压响应强度逐渐增强,瞬态光伏响应达到最大值的时间亦有着不同程度的延迟.这表明适量的N掺杂能够提高TiO2纳米粒子中光生载流子的分离效率,相应地延长载流子的传输时间,增加光生电荷的寿命,从而促进其光催化活性;而过量的N掺杂则增加了TiO2纳米粒子中光生载流子的复合中心,抑制其光催化活性. 相似文献
3.
将纳米管TiO2浸入含尿素和硝酸钯的乙醇溶液中,将乙醇超声挥发后所得样品先在空气中600℃下煅烧,再在H2气氛中400℃中热还原,得到Pd/N共掺杂TiO2.分别采用DRS、X射线衍射仪及X射线光电子能谱仪分析了掺杂TiO2样品的光吸收能力、晶体结构及表面化学组成;并评价了其对紫外光和可见光照下丙烯降解反应的催化活性.结果表明,共掺杂TiO2样品的活性优于单一Pd或N掺杂TiO2.其原因在于,Pd和N共掺杂具有协同作用,从而共同提高了TiO2的光催化活性. 相似文献
4.
稀土掺杂TiO_2光催化剂的制备及产氢性能研究 总被引:1,自引:0,他引:1
采用溶胶-凝胶法制备了稀土掺杂的系列光催化剂RE/TiO2(La/TiO2,Eu/TiO2,Y/TiO2,Pr/TiO2,Nd/TiO2,Sm/TiO2,Gd/TiO2),XRD晶相结构表征分析表明稀土离子的掺杂有效抑制了TiO2晶粒的增长。分别考察了不同酸、醇为牺牲剂时RE/TiO2对光催化产氢性能的影响。实验结果表明:以乙醇为牺牲剂时,稀土的掺杂均提高了光催化产氢性能;以乙酸为牺牲剂时,只有铕和镧的掺杂提高了光催化活性。以La/TiO2为光催化剂,甲醇、乙醇和正丙醇为牺牲剂,光催化产氢活性顺序为:乙醇甲醇正丙醇;以Eu/TiO2为光催化剂,以甲酸、乙酸和丙酸为牺牲剂,光催化产氢活性依次为:甲酸丙酸乙酸;因此,牺牲剂的选择对光催化产氢活性有重要的影响。 相似文献
5.
N 掺杂TiO2光催化剂的制备及其可见光活性研究 总被引:15,自引:0,他引:15
A visible-light-active photocatalyst was prepared by calcination of the hydrolysis product of tetrabutyl titanate with ammonia as precipitant. The photocatalyst was characterized by X-ray diffraction (XRD), UV-Vis diffuse reflection spectra (DRS), thermal gravimetric-differential thermal analysis (TG-DTA), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM). The color of the photocatalyst was yellow and could absorb light wavelength under 550 nm as measured by DRS. The catalyst calcined at higher temperature will give lower absorbance for visible light. Structures of the sample were characterized mainly to be anatase by XRD except for the sample calcined at 700 ℃ which gave mixtures of anatase and rutile. TG-DTA results showed that temperature for anatase formation was 415 ℃. XPS results showed that doped-nitrogen was presented in the sample, they are important to show visible-light absorbency. The photocatalytic activities were evaluated using methyl orange and phenol as model pollutants, the results showed that over 90% of phenol could be degraded under visible light using N/TiO2 as the catalyst after 4 hours reaction. Almost the same activity was found for the TiO2 photocatalyst calcined at different temperature under sunlight but activities were different when the treatment was under UV light. 相似文献
6.
过渡元素掺杂对纳米TiO_2光催化剂性能的影响 总被引:3,自引:0,他引:3
以沉淀法制备得到了第一过渡系23至30号元素(V, Cr, Mn, Fe, Co, Ni, Cu, Zn)分别掺杂的纳米TiO_2光催化剂。考察了它们光催化降角水中十二烷基苯磺酸 钠的活性,研究了它们的光催化活性与催化剂微晶结构、电子亲和势与离子半径比 、离子的磁矩之间的关系。发现其催化活性的变化与这些元素的稳定氧化态的电子 亲和势与离子半径的比值和掺杂原子的磁矩具有较好的相关性。而催化剂的(101 )晶面的XRD衍射强度、微晶尺寸和晶格畸变应力对催化活性也具有一定的影响。 相似文献
7.
过渡元素掺杂对纳米TiO_2光催化剂性能的影响 总被引:37,自引:2,他引:37
以沉淀法制备得到了第一过渡系23至30号元素(V, Cr, Mn, Fe, Co, Ni, Cu, Zn)分别掺杂的纳米TiO_2光催化剂。考察了它们光催化降角水中十二烷基苯磺酸 钠的活性,研究了它们的光催化活性与催化剂微晶结构、电子亲和势与离子半径比 、离子的磁矩之间的关系。发现其催化活性的变化与这些元素的稳定氧化态的电子 亲和势与离子半径的比值和掺杂原子的磁矩具有较好的相关性。而催化剂的(101 )晶面的XRD衍射强度、微晶尺寸和晶格畸变应力对催化活性也具有一定的影响。 相似文献
8.
N掺杂可见光化催化剂的研究 总被引:1,自引:0,他引:1
The N-doped, yellow colored titanium oxide photocatalysts were prepared with Ti(SO4)2 and NH4HCO3 as precursors by precipitation method. The photocatalytic ability under the irradiation of UV or visible light for the catalysts prepared was studied by degradation of styphnic acid. The materials were characterized by EDS, XRD, FTIR, UV-Vis DRS, and XPS. The results indicate that the photocatalytic ability of catalysts is improved, especially the ability of visible light response. The results of UV-Vis DRS show that the response wavelength range of N-dopped nitrogen is red shifted, the absorption region is expanded to 476 nm. 相似文献
9.
10.
11.
A type of high visible-light active titanium oxinitride(TiO2-xNx) powder was prepared by a simple proc-ess:the calcination of the hydrated titanium dioxide at the atmosphere of ammonia-argon using a tu-bular electric furnace at high temperatures. The hydrated titanium dioxide was synthesized as the precursor of TiO2-xNx using titanic acid as raw material,which came from sulfate technique of produc-ing titanium white. The effects of temperature and reaction time on the nitrogen content,grain size and crystal structure were studied. The visible-light activity and photocatalysis capability of the powder were also investigated. 相似文献
12.
Synthesis and characterization of substitutional and interstitial nitrogen-doped titanium dioxides with visible light photocatalytic activity 总被引:1,自引:0,他引:1
Feng Peng Lingfeng Cai Hao Yu Hongjuan Wang Jian Yang 《Journal of solid state chemistry》2008,181(1):130-136
Both substitutional and interstitial nitrogen-doped titanium dioxides (N-TiO2) were prepared. Their surface states were clarified by XPS spectra of N 1s, O 1s and Ti 2p. The results of photocatalysis show that both substitutional and interstitial N impurities greatly enhance the photoactivity of TiO2 in visible light. Moreover, the visible light activity of interstitial N-doped TiO2 is higher than that of substitutional N-doped TiO2. The microwave synthesis presented in this paper is a promising and practical method to produce interstitial nitrogen-doped photocatalysts with high visible light activity. 相似文献
13.
Annalisa Vilasi Immacolata Fiume Paolo Pace Mosè Rossi Gabriella Pocsfalvi 《Journal of mass spectrometry : JMS》2013,48(11):1188-1198
Owning to their anion‐exchange properties, titanium and zirconium dioxides are widely used in phosphopeptide enrichment and purification protocols. The physical and chemical characteristics of the particles can significantly influence the loading capacity, the capture efficiency and phosphopeptide specificity and thus the outcome of the analyses. Although there are a number of protocols and commercial kits available for phosphopeptide purification, little data are found in the literature on the choice of the enrichment media. Here, we studied the influence of particle size on the affinity capture of phosphopeptides by TiO2 and ZrO2. Bovine milk casein derived phosphopeptides were enriched by micro and nanoparticles using a single‐tube in‐solution protocol at different peptide‐to‐beads ratio ranging from 1 : 1 to 1 : 200. Unsupervised hierarchical cluster analysis based on the whole set of Matrix Assisted Laser Desorption/Ionization time‐of‐flight mass spectra of the phosphopeptide enriched samples revealed 62 clustered peptide peaks and shows that nanoparticles have considerably higher enrichment capacity than bulk microparticles. Moreover, ZrO2 particles have higher enrichment capacity than TiO2. The selectivity and specificity of the enrichment was studied by monitoring the ion abundances of monophosphorylated, multiphosphorylated and non‐phosphorylated casein‐derived peptide peaks at different peptide‐to‐beads ratios. Comparison of the resulting plots enabled the determination of the optimal peptide‐to‐beads ratios for the different beads studied and showed that nano‐TiO2 have higher selectivity for phosphopeptides than nano‐ZrO2 particles. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
14.
15.
Yu Zhiyong E. Mielczarski J.A. Mielczarski D. Laub L. Kiwi-Minsker A. Renken J. Kiwi 《Journal of molecular catalysis. A, Chemical》2006,260(1-2):227-234
The repetitive discoloration kinetics of the azo-dye Methyl Orange (taken as a model organic compound) was followed under solar simulated radiation (90 mW/cm2) to assess the performance of the TiO2/Tedlar® composite photocatalyst. The influence of solution parameters on the photo-discoloration process: pH, dye concentration, applied light intensity and concentration of H2O2 were systematically investigated. During the photocatalysis a modification occurs in the TiO2/Tedlar® composite due to the TiO2 interaction with the Tedlar® film. Physical insight is given for the stabilization mechanism of the TiO2 particles in the Tedlar matrix based on the data obtained by X-ray photoelectron spectroscopy (XPS). The F 1s peak of the Tedlar film indicates that the TiO2 is loaded on the Tedlar fluoro-groups. The loading of TiO2 on the 75 μm thick Tedlar® film was 0.9% (w/w) as determined by atomic absorption spectrophotometry (AAS). Attenuated total reflection infrared spectroscopy (ATRIR) shows no formation of additional bands within the photodiscoloration reaction. This shows that an efficient catalysis taking place on the TiO2/Tedlar® surface. The rugosity (mean square roughness, rms) of the TiO2/Tedlar® film was determined by atomic force microscopy (AFM) to be 19.7 nm. This value remained constant during long-term operation. Transmission electron microscopy (TEM) reports the thickness and coverage of TiO2 Degussa P-25 on the Tedlar® surface before and after photocatalysis. 相似文献
16.
17.
采用不同浓度的硫酸溶液浸渍处理La2O3掺杂TiO2,随后经焙烧制得一系列SO24-/TiO2-La2O3光催化剂;考察了SO24-/TiO2-La2O3光催化剂对甲基橙废水溶液化学耗氧量的影响.结果表明,SO24-/TiO2-La2O3的光催化活性比TiO2-La2O3的高;H2SO4浸渍液浓度对SO24-/TiO2-La2O3的光催化活性有一定的影响,H2SO4溶液的最佳浓度为0.5mol/L.同时,催化剂的焙烧温度对其光催化活性也有一定的影响,最佳焙烧温度为500℃;而复合催化剂中La2O3的最佳掺杂量为0.3%. 相似文献
18.
19.
20.
TiO2/polyaniline composites: An efficient photocatalyst for the degradation of methylene blue under natural light 总被引:1,自引:0,他引:1
Fang Wang Shi Xiong Min 《中国化学快报》2007,18(10):1273-1277
Polyaniline (PAn) sensitized nanocrystalline TiO_2 composites (TiO_2/PAn) were successfully prepared and used as an efficient photocatalyst for the degradation of dye methylene blue (MB).The results showed that PAn was able to sensitize TiO_2 efficiently and the composite photocatalyst could be activated by absorbing both the ultraviolet and visible light (λ:190~800nm),whereas pure TiO_2 absorbed ultraviolet light only (λ<380nm).Under the irradiation of natural light,MB could be degraded more efficiently on the TiO_2/PAn composites than on the TiO_2.Furthermore,it could be easily separated from the solution by simple sedimentation. 相似文献