Capabilities of high resolution inductively coupled plasma mass spectrometry for trace element determination in plant sample digests

The analytical performance of inductively coupled plasma mass spectrometry (ICP-MS) for the analysis of plant sample digests was evaluated using double focusing sector field ICP-MS (ICP-SMS). Instrumental detection limits of ICP-SMS are superior to those obtained by quadrupole systems (ICP-QMS) and reach the fg mL^–1 range for elements with high m/z ratios. Matrix effects caused by a plant digest after sample preparation resulting in 200-fold dilution were found to be negligible. The usefulness of high mass resolution for overcoming some spectral interferences is demonstrated. Mathematical correction possibilities could be necessary to improve accuracy. The concentrations of more than 20 elements can be determined in 5 min and only one internal standard is necessary to correct for instrumental drift. Received: 30 March 1998 / Revised: 4 May 1998 / Accepted: 16 May 1998     

Multielement analysis of whole blood by high resolution inductively coupled plasma mass spectrometry

An analytical method using double focusing sector field inductively coupled plasma mass spectrometry (ICP-SMS) for rapid simultaneous determination of 50 elements in digested human blood is described. Sample preparation consisted of microwave digestion with nitric acid followed by dilution with ultrapure water. The importance of controlling possible contamination sources at different sample preparation and analysis stages in order to achieve adequate method detection limits (MDL) is emphasised. Correction for matrix effects was made using scandium, indium and lutecium as internal standards. Accuracy of the data for elements suffering from spectral interferences was improved by applying either a high resolution capability of the ICP-SMS or mathematical corrections. Different approaches for accuracy assessment in blood analysis are evaluated. Additional information on trace elements concentration in selected blood reference materials is given. The between-batch precision was assessed from replicate analysis (including sample preparation) of reference materials and was better than 10% RSD for 21 elements and better than 30% RSD for 36 elements under consideration. A statistical summary for results obtained for 31 blood samples from non-exposed subjects is presented. The majority of elements tested was found in the samples at concentrations higher than MDL. Received: 23 November 1998 / Revised: 6 January 1999 / Accepted: 12 January 1999     

Determination of lanthanum and rare earth elements in bovine whole blood reference material by ICP-MS after coprecipitation preconcentration with heme-iron as coprecipitant

An analytical method for the determination of lanthanide elements in the bovine whole blood reference material (IAEA A-13) has been investigated by inductively coupled plasma mass spectrometry (ICP-MS). The bovine whole blood reference material was digested with HNO₃ and HClO₄, and then the pH of the digested solution was adjusted to 12 with 3 M sodium hydroxide aqueous solution. In this experimental procedure, lanthanide elements in the blood sample were coprecipitated with iron mainly derived from heme-iron in blood itself. In order to minimize matrix effects due to iron, excess iron in the analysis solution was removed by solvent extraction using methyl isobutyl ketone (MIBK) prior to the determination of lanthanide elements by ICP-MS. The recoveries of all lanthanide elements were almost quantitative in the recovery test. In consequence, it has been found that all lanthanide elements in bovine whole blood reference material are at the wide concentration range of 0.90 pg/g for Tm ∼1880 pg/g for Ce. Received: 2 May 1998 / Revised: 27 July 1998 / Accepted: 30 July 1998     

Determination of lanthanum and rare earth elements in bovine whole blood reference material by ICP-MS after coprecipitation preconcentration with heme-iron as coprecipitant

An analytical method for the determination of lanthanide elements in the bovine whole blood reference material (IAEA A-13) has been investigated by inductively coupled plasma mass spectrometry (ICP-MS). The bovine whole blood reference material was digested with HNO₃ and HClO₄, and then the pH of the digested solution was adjusted to 12 with 3 M sodium hydroxide aqueous solution. In this experimental procedure, lanthanide elements in the blood sample were coprecipitated with iron mainly derived from heme-iron in blood itself. In order to minimize matrix effects due to iron, excess iron in the analysis solution was removed by solvent extraction using methyl isobutyl ketone (MIBK) prior to the determination of lanthanide elements by ICP-MS. The recoveries of all lanthanide elements were almost quantitative in the recovery test. In consequence, it has been found that all lanthanide elements in bovine whole blood reference material are at the wide concentration range of 0.90 pg/g for Tm ∼1880 pg/g for Ce. Received: 2 May 1998 / Revised: 27 July 1998 / Accepted: 30 July 1998     

Calibration of laser-ablation ICP-MS. Can we use synthetic standards with pneumatic nebulization?

An approach for the determination of trace element concentrations in high purity metals, using an inductively coupled plasma mass spectrometer (ICP-MS) with a laser-ablation system for direct solid sample introduction after calibration with nebulized liquid standards was made. Due to the inherent differences in the rate of sample introduction with laser-ablation and pneumatic nebulization, a matrix element must be used as an internal standard. This is problematical for elements that have no isotope with a relative abundance of less than 0.1 %, since the ion signals would be too high for direct measurement, and reduction of the ablation rate would compromise the sensitivity for trace elements. Due to the high stability of ICP-unit and mass filter of the instrument used, it was found that the tail of a mass-peak of the matrix element could be used as an internal standard. Therefore, a position at –0.5 amu from the matrix-isotope (e.g. ^62.5Cu in copper samples) was used for internal standardization. The standard deviation of this signal in a period of 2.5 h was 3.6% RSD with no notable drift when the laser ablation was used for sample introduction. The calibration of the matrix-element by nebulizing liquid standards showed that the ion signal measured on the peak-tail is directly proportional to the element concentration in the ICP. This indicates that the peak shape is not only stable, but also independent of the peak height. The advantages of this method lie in the easy preparation of calibration standards for quantitative measurements with a laser-ablation system and access to homogeneous standards for materials, that are difficult to homogenize in the solid state. The calibration of the traces is performed relatively to a fixed concentration of the matrix element. Calibrations were carried out for trace concentrations in high purity copper and good recoveries were obtained for high-purity reference standards. Received: 23 February 1998 / Revised: 20 July 1998 / Accepted: 25 July 1998     

Calibration of laser-ablation ICP-MS. Can we use synthetic standards with pneumatic nebulization?

An approach for the determination of trace element concentrations in high purity metals, using an inductively coupled plasma mass spectrometer (ICP-MS) with a laser-ablation system for direct solid sample introduction after calibration with nebulized liquid standards was made. Due to the inherent differences in the rate of sample introduction with laser-ablation and pneumatic nebulization, a matrix element must be used as an internal standard. This is problematical for elements that have no isotope with a relative abundance of less than 0.1 %, since the ion signals would be too high for direct measurement, and reduction of the ablation rate would compromise the sensitivity for trace elements. Due to the high stability of ICP-unit and mass filter of the instrument used, it was found that the tail of a mass-peak of the matrix element could be used as an internal standard. Therefore, a position at –0.5 amu from the matrix-isotope (e.g. ^62.5Cu in copper samples) was used for internal standardization. The standard deviation of this signal in a period of 2.5 h was 3.6% RSD with no notable drift when the laser ablation was used for sample introduction. The calibration of the matrix-element by nebulizing liquid standards showed that the ion signal measured on the peak-tail is directly proportional to the element concentration in the ICP. This indicates that the peak shape is not only stable, but also independent of the peak height. The advantages of this method lie in the easy preparation of calibration standards for quantitative measurements with a laser-ablation system and access to homogeneous standards for materials, that are difficult to homogenize in the solid state. The calibration of the traces is performed relatively to a fixed concentration of the matrix element. Calibrations were carried out for trace concentrations in high purity copper and good recoveries were obtained for high-purity reference standards. Received: 23 February 1998 / Revised: 20 July 1998 / Accepted: 25 July 1998     

Time-resolved measurements of individual ion cloud signals to investigate space-charge effects in plasma mass spectrometry

A new approach to directly monitor space charge induced effects due to high concentrations of efficiently ionized elements in inductively coupled plasma mass spectrometry (ICP-MS) is described. The broadening of ion clouds produced from individual, monodisperse drops of sample is measured by using time-resolved ICP-MS. The extent of broadening due to high concentrations of Pb in the sample is related inversely to the analyte mass. For the lightest analyte investigated, Li⁺, the relative width of the time-resolved analyte peak increases and then shows a dip in the center as the Pb concentration is increased to 500 and then 1500 µg/mL. The initial results of experiments that investigated chemical matrix effects as a function of concomitant species concentration, analyte mass, and sampling location in ICP-MS are consistent with space-charge effects.     

Multielement analysis of whole blood by high resolution inductively coupled plasma mass spectrometry

An analytical method using double focusing sector field inductively coupled plasma mass spectrometry (ICP-SMS) for rapid simultaneous determination of 50 elements in digested human blood is described. Sample preparation consisted of microwave digestion with nitric acid followed by dilution with ultrapure water. The importance of controlling possible contamination sources at different sample preparation and analysis stages in order to achieve adequate method detection limits (MDL) is emphasised. Correction for matrix effects was made using scandium, indium and lutecium as internal standards. Accuracy of the data for elements suffering from spectral interferences was improved by applying either a high resolution capability of the ICP-SMS or mathematical corrections. Different approaches for accuracy assessment in blood analysis are evaluated. Additional information on trace elements concentration in selected blood reference materials is given. The between-batch precision was assessed from replicate analysis (including sample preparation) of reference materials and was better than 10% RSD for 21 elements and better than 30% RSD for 36 elements under consideration. A statistical summary for results obtained for 31 blood samples from non-exposed subjects is presented. The majority of elements tested was found in the samples at concentrations higher than MDL.     

Iodine determination in biological materials Options for sample preparation and final determination

This paper describes the development of various new acid sample decomposition methods, as well as an extraction (leaching) method and compares them with the “Sch?niger Combustion” technique. The methods have been developed as sample preparation techniques for iodine determination in biological materials, especially in solid samples. ICP-MS (inductively coupled plasma mass spectrometry) and a catalytic technique are employed and discussed for the final determination of iodine concentrations. Accuracy and reliability of the different analytical methods are shown in the examples of different CRMs (certified reference materials) available for iodine. The results of an interlaboratory comparison are specifically presented for the extraction (leaching) method. Received: 11 May 1998 / Revised: 14 June 1998 / Accepted: 16 June 1998     

87Sr/86Sr measurements on marine sediments by inductively coupled plasma-mass spectrometry

The application of inductively coupled plasma-mass spectrometry (ICP-MS) is documented for the study of the strontium isotopic composition (⁸⁷Sr/⁸⁶Sr) in geological samples, i.e. in the marine lithic fraction of core sediments. Methods for the determination of the isotopic composition, its accuracy and precision are reported. The results obtained simultaneously on 11 samples by both ICP-MS and thermal ionization mass spectrometry (TIMS) reveal a very good correlation (r² = 0.955). Received: 24 February 1997 / Revised: 26 May 1997 / Accepted: 30 May 1997     

87Sr/86Sr measurements on marine sediments by inductively coupled plasma-mass spectrometry

The application of inductively coupled plasma-mass spectrometry (ICP-MS) is documented for the study of the strontium isotopic composition (⁸⁷Sr/⁸⁶Sr) in geological samples, i.e. in the marine lithic fraction of core sediments. Methods for the determination of the isotopic composition, its accuracy and precision are reported. The results obtained simultaneously on 11 samples by both ICP-MS and thermal ionization mass spectrometry (TIMS) reveal a very good correlation (r² = 0.955). Received: 24 February 1997 / Revised: 26 May 1997 / Accepted: 30 May 1997     

Comparison of ICP-MS and SIMS techniques for determining uranium isotope ratios in individual particles

The determination of uranium isotope ratios in individual particles is of great importance for nuclear safeguards. In the present study, an analytical technique by inductively coupled plasma mass spectrometry (ICP-MS) with a desolvation sample introduction system was applied to isotope ratio analysis of individual uranium particles. In ICP-MS analysis of individual uranium particles with diameters ranging from 0.6 to 4.2 μm in a standard reference material (NBL CRM U050), the use of the desolvation system for sample introduction improved the precision of ²³⁴U/²³⁸U and ²³⁶U/²³⁸U isotope ratios. The performance of ICP-MS with desolvation was compared with that of a conventionally used method, i.e., secondary ion mass spectrometry (SIMS). The analysis of test swipe samples taken at nuclear facilities implied that the performance of ICP-MS with desolvation was superior to that of SIMS in a viewpoint of accuracy, because the problems of agglomeration of uranium particles and molecular ion interferences by other elements could be avoided. These results indicated that ICP-MS with desolvation has an enough ability to become an effective tool for nuclear safeguards.     

Application of a double-focusing magnetic sector inductively coupled plasma mass spectrometer with laser ablation for the bulk analysis of rare earth elements in rocks fused with Li2B4O7

Results of the use of a double-focusing, magnetic sector inductively coupled plasma mass spectrometer (ICP-MS) with ultraviolet (UV) laser ablation (LA) are presented for the bulk analysis of rare earth elements (REEs) in rocks fused with Li₂B₄O₇. The sample preparation procedure used a sample to flux weight ratio of 1 : 7, and was identical with a procedure routinely used for X-ray fluorescence (XRF) analyses of major and minor elements in geological materials. Calibration was based on a total of 18 international standard reference materials (SRMs), and Ba was used as an internal standard element for all REEs. The calibration curves were constructed using a weighted regression model. The use of internal standard, without exception, improved the correlation coefficients significantly. The 3σ detection limits were established by a blank sample of SiO₂ spiked with Ba, and were in the range from 0.003 μg g^–1 (¹⁵⁹Tb) to 0.051 μg g^–1 (¹⁴⁰Ce). The use of a large set of SRMs for calibration gave a good basis for the evaluation of analytical quality, and extensive data for calculated analytical uncertainty are presented. Instrumental precision and the repeatability of the method were studied separately, and no significant difference in these two sets of parameters were found, indicating that the spread of results predominantly was connected to the instrumental measurements. Repeated ablations on the surface of a disk did not influence subsequent measurements with XRF, showing that the fused disks can be stored for future use in XRF and/or LA-ICP-MS analysis. Received: 12 February 1998 / Revised: 6 April 1998 / Accepted: 17 April 1998     

Investigations on cluster and molecular ion formation by plasma mass spectrometry

The formation of molecular and cluster ions of different inorganic materials in plasma mass spectrometry – spark source mass spectrometry (SSMS), radiofrequency glow discharge mass spectrometry (rf GDMS), laser ionization mass spectrometry (LIMS), inductively coupled plasma mass spectrometry (ICP-MS) and laser ablation ICP-MS (LA-ICP-MS) – was investigated and compared. Similar abundance distributions of cluster ions were observed for a graphite sample, for boron nitride/ graphite and for metal oxide/graphite mixtures using different plasma mass spectrometric methods. A correlation of intensities of metal argide ions in ICP-MS with their bond dissociation energies was used to estimate unknown dissociation energies of molecular ionic species. For the elements of the 2nd or 3rd period in the periodic table, the intensities of most argon molecular ions (ArX⁺) measured by ICP-MS rise with increasing atomic number in a similar manner to the theoretically calculated bond dissociation energies of argon molecular ions.     

Determination of Am and Cm in spent nuclear fuels by isotope dilution inductively coupled plasma mass spectrometry and isotope dilution thermal ionization mass spectrometry after separation by high-performance liquid chromatography

Elemental and isotopic determination of americium and curium in spent nuclear fuels is necessary to validate neutronic calculation codes and for nuclear waste disposal purposes. Prior to mass spectrometric analysis, it is mandatory to perform separations in order to eliminate isobaric interferences between U, Pu, Am and Cm. In the spent fuels samples analyzed, a separation of U and Pu has been first realized with an anion-exchange resin. Then a rapid Am/Cm separation has been developed by high-performance liquid chromatography (HPLC) with an on-line detection using the Am and Cm α-emission. The influence of the different parameters on the chromatographic separation are described and discussed. Inductively coupled plasma mass spectrometry (ICP-MS) and thermal-ionization mass spectrometry (TIMS) have been used to measure the isotopic composition of U, Am and Cm and to determine the ²⁴¹Am/²³⁸U and ²⁴⁴Cm/²³⁸U ratios with the double spike isotope dilution method. The measurement procedures and the accuracy and precision of the results obtained with a quadrupole ICP-MS on different spent fuels samples are discussed and compared with those obtained by TIMS, used as a reference technique. Received: 30 November 1998 / Revised: 8 January 1999 / Accepted: 12 January 1999     

Determination of Am and Cm in spent nuclear fuels by isotope dilution inductively coupled plasma mass spectrometry and isotope dilution thermal ionization mass spectrometry after separation by high-performance liquid chromatography

Elemental and isotopic determination of americium and curium in spent nuclear fuels is necessary to validate neutronic calculation codes and for nuclear waste disposal purposes. Prior to mass spectrometric analysis, it is mandatory to perform separations in order to eliminate isobaric interferences between U, Pu, Am and Cm. In the spent fuels samples analyzed, a separation of U and Pu has been first realized with an anion-exchange resin. Then a rapid Am/Cm separation has been developed by high-performance liquid chromatography (HPLC) with an on-line detection using the Am and Cm α-emission. The influence of the different parameters on the chromatographic separation are described and discussed. Inductively coupled plasma mass spectrometry (ICP-MS) and thermal-ionization mass spectrometry (TIMS) have been used to measure the isotopic composition of U, Am and Cm and to determine the ²⁴¹Am/²³⁸U and ²⁴⁴Cm/²³⁸U ratios with the double spike isotope dilution method. The measurement procedures and the accuracy and precision of the results obtained with a quadrupole ICP-MS on different spent fuels samples are discussed and compared with those obtained by TIMS, used as a reference technique. Received: 30 November 1998 / Revised: 8 January 1999 / Accepted: 12 January 1999     

Determination of ruthenium in photographic emulsions – development and comparison of different sample treatments and mass spectrometric methods

Different sample treatment procedures were combined with inductively coupled plasma mass spectrometry (ICP-MS) and negative thermal ionisation mass spectrometry (NTI-MS) for the determination of ruthenium traces in photographic emulsions. Dissolution of the samples in concentrated ammonia solution was used in connection with ICP-MS by external calibration, which has the advantage of a simple sample preparation technique but introduces high amounts of the silver matrix into the mass spectrometer. On the other hand, isotope dilution mass spectrometry (IDMS) with an enriched ⁹⁹Ru spike solution was applied for ICP-MS and NTI-MS measurements, respectively, in connection with a significant reduction of the matrix by AgCl precipitation. In these cases loss of ruthenium by the AgCl precipitate has no effect on the analytical result. The results of the different methods agreed usually well analysing ruthenium traces in the range of 0.1–10 μg per gram emulsion. The detection limits obtained were 4 ng/g for ICP-IDMS, 20 ng/g for NTI-IDMS, and 15 ng/g for ICP-MS with external calibration. Differences in the results between the different methods could mainly be attributed to sample inhomogeneities. ICP-IDMS with silver matrix reduction by AgCl precipitation is recommended as a routine method, NTI-IDMS with the corresponding sample treatment as a calibration method.     

Determination of platinum group elements and gold in geological materials: a review of recent magnetic sector and laser ablation applications

Inductively coupled plasma mass spectrometry (ICP-MS) has been used extensively as a rapid and accurate instrumental technique for determinations of platinum group elements (PGEs) and gold. Methods based upon ICP-MS have been important in analyses of many types of samples, and especially of geological materials containing very low concentrations of these elements. Recently, analytical methods based upon ICP-MS have been improved and widened in scope by the introduction of new magnetic sector (or high resolution) spectrometers, and laser ablation (LA) sampling. Detection limits attainable for PGEs and Au using magnetic sector instruments in analytical procedures cited here are as low as 0.01-0.02 pg g⁻¹; instruments have a dynamic range of up to nine orders of magnitude. This review describes applications of the techniques to analyses of PGEs and gold in minerals, nodules, meteorites, ice, sediments, airborne particulates and reference materials. The period covered is 1998-2002.     

Quantitative images of metals in plant tissues measured by laser ablation inductively coupled plasma mass spectrometry

Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) was used for quantitative imaging of toxic and essential elements in thin sections (thickness of 30 or 40 μm) of tobacco plant tissues. Two-dimensional images of Mg, Fe, Mn, Zn, Cu, Cd, Rh, Pt and Pb in leaves, shoots and roots of tobacco were produced. Sections of the plant tissues (fixed onto glass slides) were scanned by a focused beam of a Nd:YAG laser in a laser ablation chamber. The ablated material was transported with argon as carrier gas to the ICP ion source at a quadrupole ICP-MS instrument. Ion intensities of the investigated elements were measured together with ¹³C⁺, ³³S⁺ and ³⁴S⁺ within the entire plant tissue section. Matrix matching standards (prepared using powder of dried tobacco leaves) were used to constitute calibration curves, whereas the regression coefficient of the attained calibration curves was typically 0.99. The variability of LA-ICP-MS process, sample heterogeneity and water content in the sample were corrected by using ¹³C⁺ as internal standard. Quantitative imaging of the selected elements revealed their inhomogeneous distribution in leaves, shoots and roots.     

Inter-method comparison for the determination of antimony and arsenic in peat samples

Four analytical approaches, based on different physical principles, for the determination of antimony (Sb) and arsenic (As) in ancient peat samples were critically evaluated: (a) open vessel digestion/hydride generation-atomic absorption spectrometry (HG-AAS), (b) closed-pressurized digestion in a microwave oven followed by sector field-inductively coupled plasma-mass spectrometry (SF-ICP-MS), (c) digestion in a microwave autoclave and subsequent quadrupole-inductively coupled plasma-mass spectrometry (Q-ICP-MS) measurements and (d) instrumental neutron activation analysis (INAA). The quality control scheme applied, always included the use of adequate plant reference materials to ensure the accuracy and precision of the analytical procedures. Additionally, two internal peat reference materials were analyzed using all four analytical approaches, generally showing good agreement for both elements. Method detection limits for As and Sb provided by all procedures were approximately 5 and 2 ng g⁻¹ which is sufficiently low for the reliable quantification of both elements in ancient, pre-anthropogenic peat samples. A comparison of As and Sb concentrations in a set of peat samples determined by INAA, HG-AAS and SF-ICP-MS revealed that INAA underestimated the values in a systematic manner, whereas HG-AAS and SF-ICP-MS data agreed very well. Best precision of the results was obtained by analytical procedures involving HG-AAS or Q-ICP-MS and varied from 3.6 to 4.3% and 7.1 to 7.5% for As (at about 0.5 μg g⁻¹) and Sb (at about 0.1 μg g⁻¹), respectively. The highest sample throughput (40 samples per run accomplished in 2 h) combined with low risk of sample contamination could be realized in the high-pressure microwave autoclave. The amount of sample required by all approaches was 200 mg, except for INAA which needed at least 25 times more sample mass to achieve comparable detection limits. For the quantification of As and Sb, inductively coupled plasma-mass spectrometry (ICP-MS) was preferred over INAA and HG-AAS, mainly because (a) less sample is needed and (b) As and Sb can be determined simultaneously. In addition, ICP-MS offers the possibility to measure concurrently a wide range of other elements which also are of environmental interest.