Qualitative characterization of the diffusion of cationic-modified PVA into the cellulose fiber pores

In this work, the diffusion of cationic poly (vinyl alcohol) (CPVA) with well-defined structures into the pores of bleached kraft fibers was investigated at equilibrium level of adsorption by means of adsorption, solute exclusion technique (SET), and nuclear magnetic resonance (NMR) relaxation method. The results showed that the interaction between CPVA and dextran polymers was weak, which allowed us to use the SET method to investigate the variation in the pore size of fibers upon diffusing CPVAs. Both adsorption and SET methods confirmed the diffusion of CPVA polymers into the fiber pores. However, the NMR technique was unable to reflect the pore size changes. The main reason for such results was probably the error that occurred in removing water between fibers via applying the water retention value (WRV) test prior to the NMR analysis. In fact, not all of the water on the fiber surface, especially on the surface of CPVA-modified fibers, could be removed by the WRV, introducing some error in the NMR analysis.     

Potassium sorbate release from poly(vinyl alcohol)-bacterial cellulose films

Active packaging materials are the subject of research because their performance exceeds that of traditional packaging. From this class, antimicrobial materials extend the shelf-life of products and reduce the risk of contamination by pathogens. In this paper, new composite materials with antimicrobial properties are obtained by using polyvinyl alcohol and bacterial cellulose powder. Potassium (2E,4E)-hexa-2,4-dienoate was used as the antimicrobial agent. The films thus obtained were characterised using Fourier-transform infrared spectroscopy and scanning electron microscopy. Mass transfer phenomena concerning the release of potassium (2E,4E)-hexa-2,4-dienoate were investigated. The results indicated that the new biocomposite films could be used as antimicrobial packaging materials.     

Analysis of solute diffusion in poly(vinyl alcohol) hydrogel membrane

Measurement of diffusion and partitioning of solutes having molecular weights ranging 180–66000 in PVA gel membranes with various crosslinking degree were carried out. With increasing solute size or decreasing number of average molecular weight between crosslinks of the membranes, both the solute permeability and partition coefficient decreased. In spite of similar solute sizes, the more hydrophilic solute ribonuclease showed higher permeability and partition coefficient than the less hydrophilic α-lactalbumin, probably due to interaction with the hydrophilic PVA. The solute diffusion through swollen gel membrane was analyzed by the equation based on free volume theory. In this analysis equation, the partition coefficient, which is defined as the ratio of solute concentration in gel membrane standardized by water volume in the membrane to that in bulk solution, was introduced as the probability of a diffusing species finding a mesh with a volume of at least the solute size. The efficiency of the proposed analysis equation was confirmed by the experimental results of the effects of solute size and water volume fraction in the membrane.     

Properties of new polyelectrolytes based on cellulose and poly(vinyl alcohol)

Carbo- and heterochain tetrazole-containing polyelectrolytes are synthesized via a sequence of cyanoethylation reactions followed by azidation of cyanoethyl derivatives of cellulose and poly(vinyl alcohol). The products exhibit properties typical for polymers containing N-H unsubstituted tetrazole cycles.     

Characterization of poly(vinyl alcohol) during the emulsion polymerization of vinyl acetate using poly(vinyl alcohol) as emulsifier

During the emulsion polymerization of vinyl acetate (VAc) using poly(vinyl alcohol) (PVA) as stabilizer and potassium persulfate as initiator, the VAc reacts with PVA forming PVA-graft-PVAc. When the grafted polymer reaches a critical size it becomes water-insoluble and precipitates from the aqueous phase contributing to the formation of polymer particles. Since particle formation and therefore the properties of the final latex will depend on the degree of grafting, it is important to quantify and to characterize the grafted PVA. In this work, the quantitative separation and characterization of the grafted water-insoluble PVA was carried out by a two-step selective solubilization of the PVAc latex, first with acetonitrile to separate PVAc homopolymer, followed by water to separate the water-soluble PVA from the remaining acetonitrile-insoluble material. After the separation, the water-soluble and water-insoluble PVA were characterized by Fourier Transform Infrared (FTIR) spectroscopy and ¹H and ¹³C nuclear magnetic resonance (NMR) analyses, from which the details of the PVA-graft-PVAc structure were obtained. © 1996 John Wiley & Sons, Inc.     

Effect of poly(ethylene oxide) on the structure and properties of poly(vinyl alcohol)

To improve the drawability of poly(vinyl alcohol) (PVA) thermal products, poly(ethylene oxide) (PEO), a special resin with good flexibility, excellent lubricity, and compatibility with many resins, was applied, and the Fourier transform infrared spectroscopy, dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and wide‐angle X‐ray diffraction (WXRD) were adopted to study the hydrogen bonds, water states, thermal properties, crystal structure, and nonisothermal crystallization of modified PVA. It was found that PEO formed strong hydrogen bonds with water and PVA, thus weakened the intra‐ and inter‐hydrogen bonds of PVA, changed the aggregation states of PVA chains, and decreased its melting point and crystallinity. Moreover, the interactions among PVA, water, and PEO retarded the water evaporation and made more water remain in the system to plasticize PVA. The existence of PEO also slowed down the melt crystallization process of PVA, however, increased the nucleation points of system, thus made more and smaller spherulites formed. The weakened crystallization capability of PVA and the lubrication of PEO made PVA chains to have more mobility under the outside force and obtain high mechanical properties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1946–1954, 2010     

Long branching in poly(vinyl acetate) and poly(vinyl alcohol). II. Polymerization of vinyl acetate in the presence of crosslinked poly(vinyl alcohol)

It is a common view that poly(vinyl acetate) has many branches at the acetyl side group, but that the corresponding poly(vinyl alcohol) has little branching. In order to study the branching in poly(vinyl acetate) and poly(vinyl alcohol) which is formed by chain transfer to polymer, the polymerization of ¹⁴C-labeled vinyl acetate in the presence of crosslinked poly(vinyl acetate), which was able to be decrosslinked to give soluble polymers, was investigated at 60°C and 0°C. This system made it possible to separate as well as to distinguish the graft polymer from the newly polymerized homopolymer. Furthermore, the degree of grafting onto the acetoxymethyl group and onto the main chain were estimated. It became clear that, in the polymerization of vinyl acetate, chain transfer to the polymer main chain takes place about 2.4 times as frequently at 60°C as that to the acetoxy group and about 4.8 times as frequently at 0°C.     

Rheological behavior of highly loaded cellulose nanocrystal/poly(vinyl alcohol) composite suspensions

Recent emphasis on the pilot scale production of cellulosic nanomaterials has increased interest in the effective use of these materials as reinforcements for polymer composites. An important, enabling step to realizing the potential of cellulosic nanomaterials in their applications is the materials processing of CNC/polymer composites through multiple routes, i.e. melt, solution, and aqueous processing methods. Therefore, the objective of this research is to characterize the viscoelastic behavior of aqueous nanocomposite suspensions containing cellulose nanocrystals (CNCs) and a water-soluble polymer, poly(vinyl alcohol) (PVA). Specifically, small amplitude oscillatory shear measurements were performed on neat PVA solutions and CNC-loaded PVA suspensions. The experimental results indicated that the methods used in this study were able to produce high-quality nanocomposite suspensions at high CNC loadings, up to 67 wt% with respect to PVA. Additionally, the structure achieved in the nanocomposite suspensions was understood through component attributes and interactions. At CNC loadings near and less than the percolation threshold, a polymer mediated CNC network was present. At loadings well above the percolation threshold, a CNC network was present, indicated by limited molecular weight dependence of the storage modulus. Overall, these results provide increased fundamental understanding of CNC/PVA suspensions that can be leveraged to develop advanced aqueous processing methods for these materials.     

Study of the miscibility of poly(vinyl pyridines) with poly(vinyl acetate), poly(vinyl alcohol) and their copolymers

Miscibility of poly(4-vinyl pyridine) (P4VP) and poly(2-vinyl pyridine) (P2VP) with poly(viny acetate) (PVAc), poly(vinyl alcohol) PVA and poly(vinyl acetate-co-alcohol) (ACA copolymers) has been investigated over a wide composition range. Differentiaal scanning calorimetry (DSC) results indicate that P2VP is immiscible with PVAC, PVA, and their copolymers over the whole composition range. In turn, P4VP appears to be immiscible with PVAC and PVA, but miscible with some ACA copolymers in certain range of composition. The P4VP-ACA phase diagram for different copolymer compositions has been determined. The variation of the glass transition temperature with composition for miscible mixtures was found to follow the Gordon-Taylor equation, with the parameter κ dependent upon copolymer composition. FTIR analysis of blends reveal the existence of specific interactions via hydrogen bonding between hydroxyl groups and the nitrogen of the pyridinic ring, which appear to be decisive for miscibility. © 1994 John Wiley & Sons, Inc.     

ξ-potential and surface dye-ability of poly(vinyl alcohol) fiber with different degree of formalization in a cationic dye solution

Summary The surface dyeability of the poly(vinyl alcohol) fiber with different degree of formalization was studied by measuring -potential of the fiber in alkaline aqueous solutions (pH 10) of a cationic dye Methylene Blue. With the increase in the dye concentration, the sign of the -potential of the fiber changed from negative to positive and thereafter the positive value approximated to saturated value, and the amount of dye adsorbed (expressed in mol/cm²-fiber) increased also. These results may possibly be attributed to the formation of the electrostatic bond between the fiber and the dye. The linear relations were found between and logC _d and its slope did not change with rise of temperature. The free energy of dyeing G (negative) calculated from the slope of the -logC _id curve, etc. increased with increasing the degree of formalization of the fiber. This fact corresponds to the increase in the surface dye adsorption with increasing the degree of formalization. With increasing the degree of formalization, the heat of dyeing H (negative) increased and the entropy of dyeing S (positive) decreased. The positive value of S for each fiber, suggests the formation of hydrophobic bond as a driving force to the dyeing of Methylene blue on the fiber surface in addition to the electrostatic bond.This paper is Part XXVII in a series on Studies on -potentials and Surface Dyeability of Natural and Synthetic Fibers in Dye Solution. Part XXVI: T. Suzawa andK. Kawakami, Nippon Kagaku Kaishi1975, No. 7,1134.     

The solvation of poly(vinyl alcohol)

The possible incorporation of water molecules within the crystal structure of poly(vinyl alcohol) is discussed. Modelling of the crystal structure suggested that water could be incorporated without severe disruption, and the effect on the X-ray powder diffraction trace was simulated. The effect of variation in tacticity is discussed in terms of the nature of the hydrogen bonding. Simulated traces are compared with experimental data from atactic samples in which a change in the diffraction peak intensities is observed for samples crystallised with water present. This is compared with samples produced from nonaqueous solutions.     

Kinetics and mechanism of pH responsive cationic desorption from poly(vinyl alcohol)-borate hydrogel

Desorption of potassium chloride and calcium chloride from poly(vinyl alcohol)-borate hydrogel was studied at different pH from 3 to 10 using phthalate, phosphate and borate buffers. The rate of desorption from hydrogel was evaluated using conductance method for analysis. It was observed that rate of desorption process decreases on increasing pH of solution from acidic medium to basic medium. The mechanism responsible for the desorption of interacted K⁺ and Ca²⁺ ions in hydrogel moiety in acidic, neutral and basic medium were analyzed. The pseudo first order rate constants for desorption process at different pH were summarized and the rate of desorption of monovalent and divalent cations at various pH compared on the basis of standard deviation and linear regression constant values.     

Radiation effects on the thermal degradation of poly(vinyl chloride) and poly(vinyl alcohol)

Radiation effects on the formation of conjugated double bonds in the thermal degradation of poly(vinyl chloride) (PVC) and poly(vinyl alcohol) (PVA) were investigated. Thin films of PVC and PVA were either irradiated with γ-rays at ambient temperature (pre-irradiation) and then subjected to thermal treatment, or irradiated at elevated temperatures (in situ irradiation). An extensive enhancement of the thermal degradation was observed for the pre-irradiation of the PVC films, which was more effective than the effect of the in situ irradiation at the same absorption dose. For the PVA degradation, however, the effect of the in situ irradiation was larger than that of the pre-irradiation. The results were explained and related mechanisms were discussed based on radiation-induced chemical reactions and their individual contributions to the thermal degradation behaviors of the two polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 3089–3095, 1998     

In situ production of nanocomposites of poly(vinyl alcohol) and cellulose nanofibrils from Gluconacetobacter bacteria: effect of chemical crosslinking

Nanocomposites of poly(vinyl alcohol) (PVA) reinforced with bacterial cellulose (BC) were bioproduced by Gluconacetobacter genus bacteria. BC was grown from a culture medium modified with water-soluble PVA to allow in situ assembly and production of a novel nanocomposite that displayed synergistic property contributions from the individual components. Chemical crosslinking with glyoxal was performed to avoid the loss of PVA matrix during purification steps and to improve the functional properties of composite films. Reinforcement with BC at 0.6, 6 and 14 wt% content yielded nanocomposites with excellent mechanical, thermal and dimensional properties as well as moisture stability. Young’s modulus and strength at break increased markedly with the reinforcing BC: relative to the control sample (in absence of BC), increases of 15, 165 and 680 % were determined for nanocomposites with 0.6, 6 and 14 % BC loading, respectively. The corresponding increase in tensile strengths at yield were 1, 12 and 40 %, respectively. The results indicate an exceptional reinforcing effect by the three-dimensional network structure formed by the BC upon biosynthesis embedded in the PVA matrix and also suggest a large percolation within the matrix. Bonding (mainly hydrogen bonding) and chemical crosslinking between the reinforcing phase and matrix were the main contributions to the properties of the nanocomposite.     

Study of the self‐diffusion of poly(ethylene glycol)s in poly(vinyl alcohol) aqueous systems

We have measured the self‐diffusion coefficients of a series of oligo‐ and poly(ethylene glycol)s with molecular weights ranging from 150 to 10,000, in aqueous solutions and gels of poly(vinyl alcohol) (PVA), using the pulsed‐gradient spin‐echo NMR techniques. The PVA concentrations varied from 0 to 0.38 g/mL which ranged from dilute solutions to polymer gels. Effects of the diffusant size and polymer concentration on the self‐diffusion coefficients have been investigated. The temperature dependence of the self‐diffusion coefficients has also been studied for poly(ethylene glycol)s with molecular weights of 600 and 2,000. Several theoretical models based on different physical concepts are used to fit the experimental data. The suitability of these models in the interpretation of the self‐diffusion data is discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2396–2403, 1999     

Effect of aging on flow birefringence of poly(vinyl alcohol) and methyl cellulose solutions

Flow birefringence experiments on aqueous solutions of poly(vinyl alcohol) and of methyl cellulose show that the optical anisotropy changes markedly during aging of the solution. The same effect can be obtained by adding alcohol to fresh aqueous methyl cellulose solutions. The flow birefringence was measured as a function of the velocity gradient on solutions with and without alcohol during the course of aging. The phenomena are attributed to intermolecular and intramolecular interactions between exposed hydroxyl groups of the polymer chains, as these are affected by a change in the degree of hydration during aging or by the addition of a strong hydrophilic agent such as an alcohol. Association or crystallization of the ordered polymer chains may occur and lead to a supermolecular structure in the solutions. By following Sadron's theory and making use of a polar diagram, it was concluded that, after aging or mixing with the additive, the solutions become optically heterogeneous and contain two different components with optical polarizabilities of the same [in poly (vinyl alcohol) solutions] or opposite (in methyl cellulose solutions) sign.     

Neighbouring group effect on the kinetics of acetalisation of poly(vinyl alcohol)

A kinetic model for acetalisation of poly(vinyl alcohol) (PVOH) involving a neighbouring group effect has been developed using a statistical approach. Assuming that the acetalisation proceeds irreversibly, an effectiveness factor (defined as the ratio of the concentration of reactable hydroxyl groups to the total concentration of hydroxyl groups of the polymer) has been obtained as a function of conversion. When the effect of neighbouring groups on the reactivity of OH groups is neglected, the model predicts a maximum attainable conversion of 87% which compares well with that postulated by Flory for irreversible acetalisation. Possibilities of conversions > 87%, as reported by some investigators, are discussed. Flory accounted for such higher conversions by postulating reversibility of the acetalisation. Experimental studies reported in the literature, however, indicate the acetalisation to be essentially irreversible. It is shown here that the present model, with the inclusion of the neighbouring group effect, can account for such higher conversions even for irreversible acetalisation of PVOH.     

Structure–property relationships of poly(vinyl alcohol). I. Influence of polymerization solvents and temperature on the structure and properties of poly(vinyl alcohol) derived from poly(vinyl acetate)

The solubility properties of poly(vinyl alcohol) (PVA) vary with the method of preparation of the poly(vinyl acetate) (PVAc) from which it is derived. PVAc was prepared with free-radical catalysts over a range of temperatures from ?78 to 90°C. with solvents of varying chain-transfer ability. The corresponding PVA samples varied in their resistance to dissolution in water. Their high-resolution proton nuclear magnetic resonance spectra showed on differences in tacticity. Data on 1,2-diol content showed only minor differences. Hence, the increase in resistance of PVA to dissolution in water arising from changes in chain-transfer activity of the solvent used in vinyl acetate polymerization is largely attributable to a decrease in molecular weight, and the increase in resistance of PVA to dissolution in water arising from a decrease in the temperature of the vinyl acetate polymerization is largely attributable to a decrease in both long and short branches. Evidently, with polar polymers having small side groups, tacticity is not the only factor influencing property variation; that is, variations in stereoregularity influence more the crystallinity of the sample as measured by density or x-ray methods than the ultimate crystallizability under conditions of mechanical and thermal treatment. In this regard polar polymers having small side groups differ from nonpolar polymers.     

Miscibility and orientation behavior of poly(vinyl alcohol) / poly(vinyl pyrrolidone) blends

The miscibility of poly(viny1 alcohol)/poly(vinyl pyrrolidone) (PVA/PVP) blends is investigated by differential scanning calorimetry (DSC) and wide-angle x-ray diffraction (WAXD). The molecular orientation induced by uniaxial stretching of the blends is also examined by WAXD and birefringence measurements. It is shown by the DSC thermal analysis that the polymer pair is miscible, since a single glass transition temperature (T_g) is situated between the T_gs of the two homopolymers at every composition. The T_g versus composition curve does not follow a monotonic function but exhibits a cusp point at a PVP volume fraction of a little under 0.7, as in a case predicted by Kovacs' theory. The presence of a specific intermolecular interaction between the two polymers is suggested by an observed systematic depression in the melting point of the PVA component. A negative value of the polymer-polymer interaction parameter, χ₁₂ = 0.35 (at 513 K), is estimated from a thermodynamic approach via a control experiment using samples crystallized isothermally at various temperatures. The extent of optical birefringence (Δn) of the drawn blends decreases drastically with increasing PVP content up to 80 wt %, when compared at a given draw ratio, and ultimately Δn is found to change from positive to negative at a critical PVP concentration of a little over 80 wt %. Discussion of the molecular orientation behavior takes into consideration a birefringence compensation effect in the miscible amorphous phase due to positive and negative contributions of oriented PVA and PVP, respectively.