Glycine oligomerization on silica and alumina

Oligomerization of glycine (gly) and diglycine (gly₂) on silica and alumina was observed in experiments simulating wetting-drying cycles at 80°C. Glycine produces less than 1% total yield of gly₂ and diketopiperazine (DKP) after one week. In experiments starting from gly₂, more than 10% DKP is formed. Formation of higher oligomers (gly₃–gly₆) proceeded as well, with 3.8% and 5.1% total yields on silica and alumina surfaces respectively.     

Cobalt-mediated oligomerization reactions of amino-substituted acetylene derivatives

Reactions of the aminoacetylenes Et₂N-CC-R (R = SiMe₃, SPh, PPh₂; 1a-c) with (η⁵-pentamethylcyclopentadienyl)bis(ethene)cobalt yield the corresponding (η⁵-pentamethylcyclopentadienyl)(η⁴-cyclobutadiene)cobalt complexes 2a-c. Treatment of 1-phenylthio-2-diethylaminoacetylene 1b with three equivalents of CpCo(CO)₂ leads to the 1,3-dicobalta-bicyclobutane derivative 3′b. The analogous compound 3′d and the trinuclear cobalt complex 4′d are obtained from the reaction of bis(diethylamino)acetylene (1d) with (η⁵-cyclopentadienyl)bis(ethene)cobalt. Treatment of 1d with excess Co₂(CO)₈ yielded unexpectedly a mixture of di- and tetranuclear cobalt-carbene complexes 7 and 8, most likely formed through interaction of oxygen. A designed route to 7 and 8 is found by reacting the tetraethyloxamide 6 with Co₂(CO)₈ and Co₄(CO)₁₂, respectively. The catalytic cyclotrimerization reaction of the aminothioacetylene derivative 1b with [CpCo(CO)₂] or [Co₂(CO)₈] leads to tris(phenylthio)-tris(diethylamino)benzene derivative 9. The new compounds have been characterized by NMR spectroscopy, mass spectrometry as well as by X-ray structure analyses for 3′d, 7 and 8. The molecular structure of 3′d in the crystal reveals the presence of a bicyclobutane framework with a Co-Co distance (2.36 Å) lying between a single and a double bond, whereas the former CC triple bond is completely ruptured (2.13 Å). The Co-C(carbene) distances in 7 and 8 are 1.93 and 1.95 Å, respectively.     

Mechanism of the initial stage of silicate oligomerization

The mechanism of the initial stage of silicate oligomerization from solution is still not well understood. Here we use an off-lattice kinetic Monte Carlo (kMC) approach called continuum kMC to model silicate oligomerization in water solution. The parameters required for kMC are obtained from density functional theory (DFT) calculations. The evolution of silicate oligomers and their role in the oligomerization process are investigated. Results reveal that near-neutral pH favors linear growth, while a higher pH facilitates ring closure. The silicate oligomerization rate is the fastest at pH 8. The temperature is found to increase the growth rate and alter the pathway of oligomerization. The proposed pH and temperature-dependent mechanism should lead to strategies for the synthesis of silicate-based materials.     

Functionalization of colloidal silica and silica surfaces via silylation reactions

A series of trialkoxysilane compounds tipped with primary amine groups were used to functionalize the surfaces of glass and colloidal silica. Streaming potential and microelectrophoretic mobility measurements were used to monitor the stability of the functionalized surfaces.Hydrolytic breakdown of the surface-to-silane coupling was induced by either successively increasing and decreasing the pH of the solution in contact with the surface, or by aging the derivatised surfaces in aqueous solution over prolonged periods of time. The chemistry of the spacer units between the trialkoxysilane group and the primary amine tip had a major influence on the subsequent hydrolytic stability. Large hydrophobic spacer groups showed small changes in the electrokinetic properties on storage, but large changes when successively titrated with acid and base through the pH range. The behavior observed with small hydrophobic spacer groups was that large changes in electrokinetic properties were obtained on storage and with pH titration.     

Ring-opening oligomerization reactions using aluminium complexes of schiff's bases as initiators

Bifunctional telechelics with defined structure can be prepared by oligomerization of oxiranes, β-butyrolactone and L-lactide using aluminium Schiff's base complexes as initiators. Chiral initiator (SALCENAlCl) shows a stereoelective character leading to preferential oligomerization of one enantiomer from a racemic monomer mixture. The reaction with β-butyrolactone proceeds through O-alkyl cleavage. Alkoxy Schiff's bases aluminium complexes are used for oligomerization of L-lactide. All the prepared oligomers were fully characterized by IR, elemental analysis, ¹H and ¹³C NMR and GPC.     

Chemistry of the silica surface: liquid-solid reactions of silica gel with trimethylaluminum

The reaction of trimethylaluminum and dry, high-surface-area (500 m2/g) silica gel in a mixed slurry was studied using multinuclear, solid-state NMR spectroscopy. The products of the initial reaction were characterized, and their progress through subsequent washing with diethyl ether and reactions with measured amounts of water was followed. The quantitative distribution of different chemical forms of carbon deposited on the silica surface by the initial reaction was measured. The products of the initial reaction are dominated by methyl species of the types Al(CH3)n (with Si-O-Al linkages), Si-O-CH3, and (Si-O)4-nSi(CH3)n; aluminum is seen to exist predominantly as a five-coordinate species. Subsequent treatment with diethyl ether fails to remove any surface species, but instead the ether becomes strongly associated with the surface and highly resistant to removal. Stepwise additions of water hydrolyze the Al-CH3 and Si-O-CH3 moieties, leading to conversion of five-coordinate aluminum to four- and six-coordinate aluminum, and affect the partial release of the surface-associated diethyl ether; Si-CH3 moieties remain. The effect of aromatic and saturated solvents on the initial reaction was examined and found to cause a small but significant change in the distribution of products. Structures of aluminum-centered species on the silica surface consistent with the spectroscopic data are proposed.     

Significance of oligomerization reactions in the transesterification of dimethyl terephthalate with ethylene glycol

Experimental investigations dealing with and mathematical models proposed for the kinetics of the transesterification of dimethyl terephthalate with ethylene glycol were critically reviewed. The models were found to be inadequate, while the investigations were found to be entirely lacking in information about the significance of oligomerization reactions. The significance of these reactions was deduced to be negligible by carrying out an analysis of the kinetics of possible ester interchange and transesterification reactions by use of data on methanol reported in the reviewed literature. This analysis was made possible by the application of numerical quadrature routines in testing the assumed models by the integral method.     

Selective aldol reactions of acetals on mesoporous silica catalyst

Mukaiyama-aldol reactions of carbonyl compounds with silyl enol ethers were well catalyzed on siliceous mesoporous materials (MCM-41). The reactivity of acetals was much higher than that of aldehyde. The reactions proceeded selectively at 273-298 K on the catalyst of 30 mg per mmol of the substrate.     

催化裂化反应对1-己烯叠合反应的影响规律

分别以1,3,5-三异丙苯和正辛烷为不同分子尺寸催化裂解原料,以1-己烯为叠合原料,评估了合成的多级孔ZSM-5分子筛催化剂上催化裂化反应和烯烃叠合反应的耦合机制.模型化合物催化裂解反应结果表明,在合成的多级孔ZSM-5分子筛上不同尺寸分子裂解性能受到抑制,1,3,5-TIPB裂解能力下降,正辛烷裂解初始转化率由70％...     

Nonenzymatic oligomerization reactions on templates containing inosinic acid or diaminopurine nucleotide residues.

The template-directed oligomerization of nucleoside-5'-phosphoro-2-methyl imidazolides on standard oligonucleotide templates has been studied extensively. Here, we describe experiments with templates in which inosinic acid (I) is substituted for guanylic acid, or 2,6-diaminopurine nucleotide (D) for adenylic acid. We find that the substitution of I for G in a template is strongly inhibitory and prevents any incorporation of C into internal positions in the oligomeric products of the reaction. The substitution of D for A, on the contrary, leads to increased incorporation of U into the products. We found no evidence for the template-directed facilitation of oligomerization of A or I through A-I base pairing. The significance of these results for prebiotic chemistry is discussed.     

Base-catalyzed reactions enhanced by solid acids: Amine-catalyzed nitroaldol (Henry) reactions enhanced by silica gel or mesoporous silica SBA-15

The reactions of various aldehydes with CH₃NO₂ catalyzed by Et₃N, n-C₆H₁₃NH₂, and Me₂N(CH₂)₂NH₂ were accelerated by the addition of silica gel to give aromatic (aliphatic) β-nitroalcohols, aromatic nitroalkenes, and aromatic 1,3-dinitroalkanes, respectively. Mesoporous silica SBA-15 showed higher activity than silica gel for the synthesis of aromatic nitroalkenes by the reactions of the corresponding aldehydes with CH₃NO₂ catalyzed by n-C₆H₁₃NH₂.     

Hydroesterification reactions with palladium-complexed PAMAM dendrimers immobilized on silica

Highly active, recyclable catalytic systems for the hydroesterification reaction of olefins with methanol and carbon monoxide were prepared by complexing various palladium species to generation zero through four PAMAM dendrimers immobilized on silica. The silica-dendrimer-Pd(PPh2)2 complexes were the most facile recyclable catalysts and could be recycled four to six times by filtration under air. These catalysts show selectivity for the linear reaction product.     

Quantum-chemical study of Ni complexes active in reactions of oligomerization of olefins and polymerization of allenes

Conclusions Based on EHM calculations of complexes of ethylene, allene, and dimethylallene with -allylnickel bromide, it was shown that the activity of the corresponding monomers in the oligomerization reaction is determined by the elevated charge density on the terminal C atom of the -allyl ligand in the trans position to the halogen. Addition of alienes to the C atom of -allyl takes place on the central C atom in allene, characterized by a reduced charge density, the activity of the complexes in substitution of the halogen increases in the order Cl < Br< I, and the activity of the monomers increases in the order ethylene < allene < 1,1-dimethylallene.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 8, pp. 1821–1823, August, 1986.     

Reflectance FTIR investigations of the reactions of silanes on silica surfaces

CIR sampling has been used to demonstrate that the antimicrobial silane SiQAC is stable hydrolysis in aqueous solution at near neutral pH values. However, rapid hydrolysis occurs in mildly acidic solutions, but not accompanied by condensation of the silanol groups. After hydrolysis, condensation to form siloxane bonds is rapid in basic solution. The degree of hydrolysis is increased in the presence of silica gel. The silane on silica gel is quite durable towards desorption when contacted with water.     

Carbonylation reactions of iodoarenes with PAMAM dendrimer-palladium catalysts immobilized on silica

Palladium complexes immobilized onto generation 0-3 PAMAM dendrimers supported on silica were used as catalysts for the carbonylation of iodobenzene in methanol to form methyl benzoate. High yields were obtained and the catalyst was recycled 4-5 times without significant loss of activity. The carbonylation reaction was found to be applicable to a variety of iodoarenes regardless of the nature of the substituent.     

Application of hydrogen peroxide encapsulated in silica xerogels to oxidation reactions

Hydrogen peroxide was encapsulated into a silica xerogel matrix by the sol-gel technique. The composite was tested as an oxidizing agent both under conventional and microwave conditions in a few model reactions: Noyori's method of octanal and 2-octanol oxidation and cycloctene epoxidation in a 1,1,1-trifluoroethanol/Na2WO4 system. The results were compared with yields obtained for reactions with 30% H2O2 and urea-hydrogen peroxide (UHP) as oxidizing agents. It was found that the composite has activity similar to 30% H2O2 and has a several advantages over UHP such as the fact that silica and H2O are the only products of the composite decomposition or no contamination by urea or its derivatives occurs; the xerogel is easier to heated by microwave irradiation than UHP and could be used as both an oxidizing agent and as solid support for microwave assisted solvent-free oxidations.     

Nickel(II) complexes bearing pyrazolylpyridines: synthesis,structures and ethylene oligomerization reactions

Reactions of 2‐bromo‐6‐(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)pyridine ( L1 ) and 2,6‐bis(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)pyridine ( L2 ) with NiCl₂ and NiBr₂ led to the formation of their respective metal complexes [NiCl₂(L1)] ( 1 ), [NiBr₂(L1)] ( 2 ) and [NiBr₂(L2)] ( 3 ) in moderate to high yields. The complexes were characterized using elemental analyses, mass spectrometry and single‐crystal X‐ray diffraction for 2 . The solid‐state structure of 2 confirmed the bidentate coordination mode of L1 and formation of a monometallic compound. Activation of the nickel(II) pre‐catalysts with methylaluminoxane afforded active catalysts in the ethylene oligomerization reaction to produce mainly butenes (84–86%). In contrast, activation of nickel(II) pre‐catalyst 2 with ethylaluminium dichloride resulted in partial Friedel–Crafts alkylation of the toluene solvent by the preformed oligomers. Complex structure, nature of co‐catalyst employed, type of solvent and reaction conditions influenced the catalytic behaviour of these pre‐catalysts. Copyright © 2015 John Wiley & Sons, Ltd.