Controllable assembly of aligned ZnO nanowires/belts arrays

We describe a simple method to assemble ZnO nanowires/belts into highly ordered arrays. ZnCu(2) alloy was used as the Zn source, which reacted with water vapor to generate ZnO nanocrystals. The reaction was performed in a mild way, which facilitated the easy control of the reaction conditions. By simply controlling the water bath temperature and carrier gas flux in our experiments, we obtained ZnO nanowires/belts aligned to form ordered arrays. The highly ordered nature of the ZnO arrays is suggested to be related both with the polarities of the H(2)O molecule and the ZnO (0001) surface. Photoluminescence (PL) microscopy revealed that the comblike structures had waveguide properties, where green light enhancement was observed at the tips of the branches. The light enhancement property reveals their promising applications as light source arrays.     

Vertically aligned dense carbon nanotube growth with diameter control by block copolymer micelle catalyst templates

We have grown a dense array of vertically aligned carbon nanotubes (CNTs) with a controlled distribution of diameters by using block copolymer micelles to form and pattern catalyst particles. The block copolymer poly(styrene-block-acrylic acid) (PS16500-PAA4500) was dissolved in toluene to form micelles and then loaded with FeCl3. The metal-loaded micelles were spin-coated on Si and then thermally treated to remove the polymer. Using this process, we produced surfaces patterned with iron oxide catalyst particles with particle densities ranging from 1400 microm(-2) to 3800 microm(-2) and a size distribution of (6.9 +/- 0.8) nm. CNT growth by thermal chemical vapor deposition was then performed on these samples. The low-density catalyst sample produced unaligned, low-density CNTs, whereas the high-density catalyst sample produced vertically aligned, dense CNTs about 10 microm in length. Transmission electron microscopy revealed that the CNTs typically had double and triple graphitic layers with normally distributed diameters of (4.5 +/- 1.1) nm. For comparison, CNTs grown from the standard approach of blanket Fe films had a wide distribution of diameters between 6 and 21 nm. This catalyst preparation approach dramatically sharpens the size distribution of CNTs, compared to standard approaches, and provides a simple means of controlling the areal density of CNTs.     

Systematic study on experimental conditions for large-scale growth of aligned ZnO nanowires on nitrides

In vapor-liquid-solid (VLS) growth, it is generally believed that nanowires would grow as long as the right catalysts and substrate are supplied as well as the growth temperature is adequate. We show here, however, that oxygen partial pressure plays a key role in determining the quality of the aligned ZnO nanowires. We present a "phase diagram" between the oxygen partial pressure and the growth chamber pressure for synthesizing high quality aligned ZnO nanowires on GaN substrate. This result provides a road map for large-scale, controlled synthesis of ZnO nanowires on nitride semiconductor substrates with the potential to meet the needs of practical applications. The chemical process involved in the growth process is also systematically elaborated based on experimental data received under different conditions.     

Efficient photocatalytic degradation of Acid Red 57 using synthesized ZnO nanowires

Zinc oxide photocatalyst was synthesized through a low‐temperature co‐precipitation process using zinc sulfate as precursor for the degradation of Acid Red 57 (AR57) under UV irradiation. The activities of the prepared photocatalyst at different calcination temperatures (400, 500, and 600 °C) were investigated. The synthesized zinc oxides were characterized by different techniques such as X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, N₂ adsorption–desorption, and pH titration for the determination of the zero‐point charge (pH_ZPC). The efficiency of photocatalytic degradation of ZnO prepared at the calcination temperatures of 400, 500, and 600 °C was 90.03, 77.67, and 72.71%, respectively, after 190 min. The kinetics and scavengers of the reactive species during the degradation were also investigated. It was found that the degradation of AR57 fitted first‐order kinetics and the OH^? radicals were the main species. During irradiation, the formation of OH^? free radicals was ascertained by photoluminescence studies using terephthalic acid as the probe molecule.     

Polystyrene-ZnO core-shell microspheres and hollow ZnO structures synthesized with the sulfonated polystyrene templates

Mono-sized sulfonated polystyrene (PS) microspheres were used as templates to prepare PS-zinc oxide (ZnO) core-shell microspheres. Two different hollow ZnO structures were obtained after removing the PS cores by solvent extraction or calcinations. However, we obtained rod-like ZnO by either using unsulfonated PS microspheres as templates or without any templates. Transmission electron microscope (TEM) and scanning electron microscope (SEM) images were used to characterize the structures and morphologies of all the samples. X-ray diffraction (XRD), electron diffraction (ED) and infrared (IR) spectra were, respectively, used to study the crystal structure and composition of samples, respectively.     

Growth mechanism and optical properties of aligned hexagonal ZnO nanoprisms synthesized by noncatalytic thermal evaporation

Vertically aligned perfectly hexagonal-shaped ZnO nanoprisms have been grown on a Si(100) substrate via a noncatalytic thermal evaporation process by using metallic zinc powder in the presence of oxygen gas. The as-grown nanoprisms consist of ultra smooth Zn-terminated (0001) facets bounded with the {0110} surfaces. The as-synthesized products are single-crystalline with the wurtzite hexagonal phase and grown along the [0001] direction, as confirmed from the detailed structural investigations. The presence of a sharp and strong nonpolar optical phonon high-E2 mode at 437 cm(-1) in the Raman scattering spectrum further confirms good crystallinity and wurtzite hexagonal phase for the as-grown products. The as-grown nanoprisms exhibit a strong near-band-edge emission with a very weak deep-level emission in the room-temperature and low-temperature photoluminescence measurements, confirming good optical properties for the deposited products. Moreover, systematic time-dependent experiments were also performed to determine the growth process of the grown vertically aligned nanoprisms.     

Polyaniline nanowires on Si surfaces fabricated with DNA templates

It is essential to put individual, free-standing nanowires onto insulating substrates and integrate them to useful devices. Here we report a strategy for fabrication of conducting polymer nanowires on thermally oxidized Si surfaces by use of DNA as templates. The direct use of stretched and immobilized DNA strands as templates avoids the agglomeration of DNA caused by shielding of charges on DNA when polyaniline/DNA complexes formed in solution. Most importantly, the oriented DNA strands immobilized on the Si surface predetermine the position and the orientation of the nanowires. The approach described here is the first step toward uniting the programmable-assembly ability of DNA with the unique electronic properties of conducting polymers for high-density functional nanodevices. The conductivity of the nanowires is very sensitive to the proton doping-undoping process, suggesting that the nanowires hold great promise for sensitive chemical sensor applications.     

p-n Heterojunction on ordered ZnO nanowires/polyaniline microrods double array

Recently, there has been growing interest in the design of novel nano- and/or microscaled heterojunctions consisting of two distinctive ordered semiconductor arrays for highly efficient p-n diodes used in optical, optielectronic, and microelectronic devices. Here, we report the attainment of an ordered double array comprising of p-type polyaniline microrods and n-type ZnO nanowires by a controlled electrochemical deposition method. Extensive chemical and physical characterizations have been performed on the fabricated p-n heterojunction. The double-array p-n heterojunction exhibits good rectifying characteristics, the rectification ratio of which exhibits a minimum at an illumination density of 93 mW cm(-2), making it suitable for high-sensitivity photodetectors. This research is expected to open up a new avenue for the development of highly efficient and sensitive p-n heterojunction diodes and possibly serve as the building blocks for future nanoelectronics.     

Improvement in carrier mobility of poly(3,4‐ethylenedioxythiophene) nanowires synthesized in porous alumina templates

Polymeric nanowires of poly(3,4‐ethylenedioxythiophene) (PEDOT) are electrochemically synthesized using porous anodic alumina oxide (AAO) membranes as templates. Four‐point resistivity measurements on more than 100 PEDOT nanowires with different diameters (50–250 nm) reveal a statistically significant size‐dependent phenomenon in which the nanowires with a smaller diameter exhibit higher conductivity. Structural characterization with Raman spectroscopy and doping level estimation with energy‐dispersive X‐ray spectrometry and X‐ray photoelectron spectroscopy indicate that the observed conductivity enhancement can be attributed to improved carrier mobility in PEDOT nanowires having an elongated conjugation structure because of the effect of the AAO template. From the estimated doping levels (～5%) and conductivity data (～100 S/cm), it is found that the carrier mobility reach 2.0 cm²/V s for the nanowire with the smallest diameter, as compared with 4.0 × 10^?4 cm²/V s for a bulk PEDOT film. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Lasing mechanism of ZnO nanowires/nanobelts at room temperature

ZnO has become the focus of photonics and optoelectronic research. We prepared pure Mn(II) doped ZnO nanowires with a controlled reduction reaction by carbon in an asymmetrical tube. Careful time-resolved photoluminescence experimental study indicates three types of lasing mechanisms: exciton-exciton interaction, bipolaronic exciton condensation, and plasma; these exist in different ZnO nanowires, which can be changed by doping Mn in ZnO nanowire. The transformation between varied mechanisms is discussed in detail with their spectral behaviors. These results are important in the design of future violet-blue luminescence and display devices.     

Vertically aligned Ni/NiO nanocomposites with abundant oxygen deficient hetero-interfaces for enhanced overall water splitting

The design of heterostructured transition metal-based electrocatalysts with controlled composition and interfaces is key to increasing the efficiency of the water electrolysis and the elucidation of reaction mechanisms.In this work,we report the synthesis of well-controlled vertically aligned Ni/NiO nanocomposites consisting of Ni nanoclusters embedded in NiO,which result in highly efficient electrocatalysts for overall water splitting.We show that such a high catalytic efficiency toward both th...     

Comparative structure and optical properties of Ga-, In-, and Sn-doped ZnO nanowires synthesized via thermal evaporation

ZnO nanowires doped with a high concentration Ga, In, and Sn were synthesized via thermal evaporation. The doping content defined as X/(Zn + X) atomic ratio, where X is the doped element, is about 15% for all nanowires. The nanowires consist of single-crystalline wurtzite ZnO crystal, and the average diameter is 80 nm. The growth direction of vertically aligned Ga-doped nanowires is [001], while that of randomly tilted In- and Sn-doped nanowires is [010]. A correlation between the growth direction and the vertical alignment has been suggested. The broaden X-ray diffraction peaks indicate the lattice distortion caused by the doping, and the broadening is most significant in the case of Sn doping. The absorption and photoluminescence of Sn-doped ZnO nanowires shift to the lower energy region than those of In- and Ga-doped nanowires, probably due to the larger charge density of Sn.     

Ultra-sensitive hydrazine chemical sensor based on high-aspect-ratio ZnO nanowires

High-aspect-ratio ZnO nanowires based ultra-sensitive hydrazine amperometric sensor has been fabricated which showed a high and reproducible sensitivity of 12.76 μA cm⁻² nM⁻¹, detection limit, based on S/N ratio, 84.7 nM, response time less than 5 s, linear range from 500 to 1200 nM and correlation coefficient of R = 0.9989. This is the first report in which such a very high-sensitivity and low detection limit has been achieved for the hydrazine sensors by using ZnO nanostructures modified electrodes. Therefore, this work opens a way to utilize simply grown ZnO nanostructures as an efficient electron mediator to fabricate efficient hydrazine sensors.     

取向纳米ZnO/Cu_2O异质结阵列的制备及光电特性

以水热合成法制备的一维取向n型ZnO纳米线阵列为衬底,采用电化学沉积法在其上沉积生长一层p型Cu2O半导体包覆层,制备出了新型ZnO/Cu2O异质结纳米线阵列光敏器件.利用XRD、SEM、TEM、XPS、PL及光响应特性等测试方法对样品的形貌、晶体结构、化学成分及光电特性进行了分析表征.研究了生长条件对ZnO/Cu2O异质结纳米线阵列各种特性的影响.研究发现,适宜的沉积电压和沉积时间是保证ZnO/Cu2O异质结光敏器件具有适宜厚度核壳包覆层及较好光响应特性的关键因素.研究结果为ZnO及Cu2O半导体材料在光敏器件中的应用提供了实验基础.     

Seed layer effect on morphological,structural, and optical properties of electrochemically grown ZnO nanowires over different SnO2:F/glass substrates

Journal of Solid State Electrochemistry - Transparent conductive oxide electrodes and specifically SnO2:F/glass are widely employed substrates in the preparation of optoelectronic devices. This...     

Humidity sensors using in situ synthesized sodium polystyrenesulfonate/ZnO nanocomposites

Thin film humidity sensors have been prepared using in situ synthesized inorganic/organic nanocomposites of sodium polystyrenesulfonate (NaPSS) and ZnO. Its humidity sensing characteristics and the sensing mechanism have been investigated by measuring the complex impedance spectra of the sensor at different humidities. The logarithm of the impedance of sensor based on composite film changes linearly by four-orders of magnitude over almost whole humidity range (11-97% RH). Furthermore, the sensor exhibits a quick response (absorption: 2 s, desorption: 2 s) and small hysteresis (less than 2% RH). The composite film shows better sensing properties than NaPSS film, such as better linearity, quicker response. Explanation to the improvement is attempted by taking into account of the composition and structure of the nanocomposites.     

Density-controlled growth of aligned ZnO nanowires sharing a common contact: a simple, low-cost, and mask-free technique for large-scale applications

An effective, low cost, simple, and mask-free pathway is demonstrated for achieving density control of the aligned ZnO nanowires grown for large-scale applications. By a slight variation of the thickness of the thermally evaporated gold catalyst film, a significant change in the density of aligned ZnO nanowires has been controlled. The growth processes of the nanowires on an Al(0.5)Ga(0.5)N substrate has been studied based on the wetting behavior of gold catalyst with or without source vapor, and the results classify the growth processes into three categories: separated dots initiated growth, continuous layer initiated growth, and scattered particle initiated growth. This study presents an approach for growing aligned nanowire arrays on a ceramic substrate with the simultaneous formation of a continuous conducting electrode at the roots, which is important for device applications, such as field emission.