Theoretical studies on fluorescence of phenol and 1-naphthol in both acid and alkali solutions

The molecular structures of the ground state and the first singlet excited state for , C₆H₅OH, C₆H₅O⁻, , C₁₀H₇OH and C₁₀H₇O⁻, the forms of phenol and 1-naphthol in acid and alkali solutions, were optimized by ab initio HF and configuration interaction with singlet excitations (CIS) method, respectively. Their fluorescent spectra were obtained by the time-dependent density functional theory (TD-DFT) using the B3LYP method with the 6-31+G (d) basis set. The frontier molecular orbital characteristics, fluorescent spectrum and proton affinities had been analyzed systematically in order to study different fluorescence of phenol and 1-naphthol in acid and alkali solutions. It was found that C₆H₅OH and are the main forms of phenol in acid solution, but C₆H₅O⁻ in alkali solution; C₁₀H₇OH and C₁₀H₇O⁻ are the main forms of 1-naphthol in alkali solution, but in acid solution. The calculated results are in good agreement with the experimental data.     

Enthalpies of combustion and formation of 3-formylchromones

The enthalpies of combustion of 3-formylchromone (3F), 3-formyl-6-methylchromone (3F6M) and 3-formyl-6-isopropylchromone (3F6I) were determined by combustion calorimetry. The molar combustion energies () of the 3F, 3F6M and 3F6I are: −(4452.4 ± 1.8), −(5115.6 ± 2.7) and −(6411.4 ± 2.5) kJ mol⁻¹, respectively. The formation enthalpies in the crystalline state () are: −(340.2 ± 2.2), −(355.1 ± 3.1) and −(415.5 ± 3.0) kJ mol⁻¹, respectively.s     

UV photodissociation of N-methylpyrrole: The role of πσ states in non-hydride heteroaromatic systems

The photophysics of jet-cooled N-methylpyrrole molecules following excitation to their first excited singlet state (the ¹A₂ state, arising from a 3s/σ^*←π electron promotion) has been investigated by resonance enhanced multiphoton ionisation spectroscopy, by measurements of wavelength resolved ‘action’ spectra for forming CH₃ photoproducts, and by velocity map imaging studies of these CH₃ products (in their v = 0 and v₂ = 1 vibrational levels). CH₃ products are observed at all excitation wavelengths within the NMP absorption band. Direct dissociation on the ¹A₂ potential energy surface (PES) yields ‘fast’ CH₃ fragments, with an average total kinetic energy release (TKER) of 6500 cm⁻¹, but this product channel is only observed in a narrow wavelength range near the absorption band origin. All of the measured CH₃ images also show a broad component, peaking at lower TKER (1700 cm⁻¹); this component extends beneath the ‘fast’ feature in images recorded at wavelengths near the origin, and accounts for all of the CH₃ products observed at shorter photolysis wavelengths. These products are attributed to decay of highly vibrationally excited ground state molecules formed by radiationless transfer from the ¹A₂ state. Similarities and differences with the results of previous studies of the H + pyrrolyl products arising in the UV photodissociation of pyrrole are discussed in terms of the likely nuclear motions on the relevant ground and excited PESs (along R_N–CH3/R_N–H), and the possible couplings between these surfaces. The present study confirms that the proposed model of ¹πσ^* state induced bond fission in heteroaromatic molecules [A.L. Sobolewski, W. Domcke, Chem. Phys. 259 (2000) 181] is also applicable to non-hydride substituted heteroaromatics, but that mass effects can have an important influence on the subsequent nuclear dynamics.     

Theoretical studies on the aromaticity of η-cyclopentadienyl cobalt dithiolene complexes

Some η⁵-cyclopentadienyl cobalt dithiolene complexes CpCoS₂C₂R₂ have been optimized at B3LYP/6-311++G(d) level. The optimized geometries agree well with experiment. The analyses of nature bond orbital and nucleus-independent chemical shift (NICS) at B3LYP/6-311++G(d) and GIAO-B3LYP/6-311++G(d) levels reveal the aromatic character of the η⁵-cyclopentadienyl cobalt dithiolene complexes. However, their aromaticity is weaker than that of the isolated . There are two reasons for the change of heterocyclic aromaticity of the metal dithiolene in the η⁵-cyclopentadienyl cobalt dithiolene complexes with respect to that of the isolated . The better equalization of bond lengths in the isolated cation is the first reason. The other reason is that the contribution to the NICS from the metallic cobalt atom is much larger in the isolated cation . The planar character of cyclopentadienyl is destroyed slightly in the complexes. At the same time, the size of cyclopentadienyl (Cp) becomes bigger than the isolated Cp⁻¹ and this is caused by the cobalt atom in the pentagon. The π-electron delocalization causes stronger aromaticity of the Cp in the complexes than that of the isolated Cp⁻¹.     

Mechanism of dissociative excitation of BrCN in electron cyclotron resonance plasma flow of He

The dissociative excitation reaction of BrCN induced by the products of the electron cyclotron resonance (ECR) plasma flow of He was studied based on the electrostatic-probe measurements and on the optical emission spectra of the B²Σ⁺ − X²Σ⁺ transition of CN radicals. The partial pressures of He and BrCN were 3 and 1 mTorr, respectively, and the partial pressure of H₂O, P_H2O, was in the range of 0.0–0.6 mTorr. The electron density, n_e, showed a negative dependence on P_H2O as (2.63 ± 0.13) × 10¹² − (0.23 ± 0.10) × 10¹² m⁻³, and the electron temperature, T_e, a positive dependence, (2.38 ± 0.36) − (4.51 ± 0.15) eV. The CN(B²Σ⁺ − X²Σ⁺) emission intensity showed a negative dependence on P_H2O. Based on a kinetic analysis of these P_H2O dependencies, the decomposition of BrCN does not proceed via electron impact; instead, decomposition proceeds via the processes involving He⁺ and/or He metastable atoms.     

Hydrothermal synthesis, structural characterisation and magnetic behaviour of hybrid complexes of N-(phosphonomethyl)iminodiacetate

Two new compounds containing multidentate chelating organic residues of N-(phophonomethyl)iminodiacetic acid (H₄pmida), [M(pyr)(H₂O)₄][M₂(Hpmida)₂(pyr)(H₂O)₂]·2(H₂O) (where pyr=pyrazine and M=Co²⁺ or Ni²⁺ for I and II, respectively) have been synthesised and structurally characterised by single-crystal and powder X-ray diffraction, elemental analysis, infrared spectroscopy, thermal analysis and solid-state ³¹P MAS NMR. The compounds contain discrete binuclear anionic [M₂(Hpmida)₂(pyr)(H₂O)₂]²⁻ units in which one pyrazine ligand bridges two M²⁺ cations which are completely trapped inside three five-membered chelate rings formed by the Hpmida³⁻ ligands. These moieties close pack in the ac plane via a series of strong and highly directional O–HO hydrogen bonds leading to the formation of anionic layers. One-dimensional cationic coordination polymers are placed in-between and strongly hydrogen-bonded to these layers. The magnetic properties of these two materials are also reported.     

Iron complexes of terdentate nitrogen ligands: formation and X-ray structure of three new dicationic complexes

Dicationic iron complexes were obtained upon complexation of the ligands 6,6″-di(p-tolyl)-2,2′:6′,2″-terpyridine (L¹) or 2,6-bis-(3-mesitylpyrazol-1-yl)pyridine (L²) with iron dichloride or iron trichloride. They were characterized by X-ray diffraction and FT-IR spectroscopy. Single crystal structure determinations of , and all show six-coordinate metal center. These complexes were obtained from L¹FeCl₂ and L²FeCl₂ during recrystallization attempts. (L¹)₂Fe²⁺ was shown to be a high-spin complex, whereas (L²)₂Fe²⁺ was shown to be low-spin. For , two independent dications of very similar geometry but with distinctive distortion were observed by X-ray analysis.     

Ion pairing, H-bonding, and π–π interactions in copper(II) complex-organo-networks derived from a proton-transfer compound of the 1,10-phenanthroline-2,9-dicarboxylic acid

The one-pot reaction between the novel proton transfer compound (pydaH₂)²⁺(phendc)²⁻, LH₂, and Cu(II) afforded the compounds (pydaH)₂[Cu(phendc)₂]·10H₂O, 1, and (pydaH)₂[Cu(phendc)(phendcH)]₂·5H₂O, 2, where pyda=2,6-diaminopyridine, and phendcH₂=1,10-phenanthroline-2,9-dicarboxylic acid. The single crystal X-ray diffraction analysis of 1 and 2 revealed that these are two novel self-assembled 3D Cu(II) complex-organo-networks, in which (pydaH)⁺ ions and [Cu(phendc)₂]²⁻ or complex units are held together by ion pairing, H-bonding, and π–π interactions. Magnetic measurements over the temperature range 1.8–310 K revealed no significant magnetic coupling between Cu(II) centers in 1 or 2.     

On the 6Πu state of Na2

The 6¹Π_u state of sodium dimer has been observed up to v = 53 in excitation spectra of the system, recorded by polarisation labelling spectroscopy technique. The Dunham coefficients are derived and the potential energy curve constructed by the inverted perturbation approach method. Equilibrium constants for the 6¹Π_u state of Na₂ are: T_e = 35446.06 ± 0.04 cm⁻¹ (with respect to the minimum of the electronic ground state), Y₁₀ = 111.388 ± 0.019 cm⁻¹, Y₀₁ = 0.112122 ± 0.000017 cm⁻¹.     

A new oxamato-bridged heterotrinuclear NiCuNi complex with irregular spin state structure: Synthesis, spectroscopy, crystal structure and magnetism

A new oxamato-bridged Ni^IICu^IINi^II species, [Ni(tacn)(H₂O)]₂[μ-Cu(pba)](ClO₄)₂·6H₂O 1, (tacn=1,4,7-triazacyclononane; pba=1,3-propylenebis(oxamato)) has been synthesized and structurally as well as magnetically characterized. Complex 1 has a discrete trinuclear Ni^IICu^IINi^II structure: Two nickel(II) ions are bridged by [Cu(pba)]²⁻ anion, macrocyclic ligand tacn works as terminal ligand of the nickel(II) center. The magnetic data of compound 1 was analyzed by means of

leading to g_Cu=2.19, g_Ni=2.18, J=−112.8 cm⁻¹, D=±4.31 cm⁻¹. The parameters are compared with the similar complexes and the irregular spin state structure of complex 1 is also described here.     

Heat capacity, enthalpy and entropy of strontium bismuth niobate and strontium bismuth tantalate

The heat capacities and enthalpy increments of strontium bismuth niobate SrBi₂Nb₂O₉ (SBN) and strontium bismuth tantalate SrBi₂Ta₂O₉ (SBT) were measured by the relaxation method (2–150 K), Calvet-type heat-conduction calorimetry (305–570 K) and drop calorimetry (773–1373 K). The temperature dependences of non-transition heat capacities in the form C_pm = 324.47 + 0.06371T − 5.0755 × 10⁶/T² J K⁻¹ mol⁻¹ (298–1400 K) and C_pm = 320.22 + 0.06451T − 4.7001 × 10⁶/T² J K⁻¹ mol⁻¹ (298–1400 K) were derived for SBN and SBT, respectively, by the least-squares method from the experimental data. Furthermore, the standard molar entropies at 298.15 K S_m°(SBN)=327.15±0.80 and S_m°(SBT)=339.23±0.72 J K⁻¹ mol⁻¹ were evaluated from the low-temperature heat capacity measurements.     

Theoretical study of the reactivity of 4d transition metal ions with N2O

The reactions of 4d transition metal ions (except Tc and Cd) with N₂O on two potential energy surfaces, producing the metal oxide ion and N₂, are studied by means of density functional theory. The results indicate that the lowest energy path corresponds to the coordination of N₂O followed by the insertion of M⁺ into the N–O bond. The reaction mechanism between 4d transition metal ions and N₂O is an insertion–elimination mechanism. All products are formed in exothermic processes. The potential energy curve crossings, which dramatically affect reaction mechanisms, are discussed in detail.     

Preparation of MoVTe(Sb)Nb mixed oxide catalysts using a slurry method for selective oxidative dehydrogenation of ethane

The preparation of bulk MoVTe(Sb)Nb mixed oxide catalysts using a traditional slurry method, results in highly active catalysts for oxidative dehydrogenation of ethane to ethene. Several major phases including orthorhombic M1, hexagonal M2 or Mo_xM_1−xO_2.8 (M = V or Nb) have been detected in the catalysts from characterization results such as X-ray diffraction (XRD), SEM and EDX analyses. Ethane conversion and yield to ethene increase with increasing content of the M1 phase in the catalysts. The maximum yield of ethene (ca. 87% selectivity and ca. 90% conversion, STY_C2H4 of 176 g  h⁻¹) has been obtained with a MoV_0.31Te_0.2Nb_0.14 mixed oxide catalyst, calcined at 873 K under nitrogen, containing almost pure orthorhombic M1 phase and small amounts of unidentified impurity phases, operating at a relatively low reaction temperature of 673 K. The orthorhombic M1 phase has been shown to be the most active in ethane activation and the most selective for ethene formation. The hexagonal M2 phase is relatively inactive in ethane activation and less selective for ethene formation. The Te-free phases such as Sb₄Mo₁₀O₃₁ and Mo_xM_1−xO_2.8 (M = V or Nb) show the lowest selectivity to ethene.     

A theoretical study of the excited electronic states of the SiCN system

Ab initio methods have been used to study the lowest-lying electronic states of the SiCN radical, which has two stable linear isomers in its electronic ground state, SiCN and SiNC. Vertical excitation energies and oscillator strengths have been computed for a number of states lying up to 8 eV. The geometries of the lowest-lying doublet and quartet states have been determined. The lowest-lying excited doublet state of SiNC (1²Σ⁺, 4.0 eV) arises from a HOMO–LUMO excitation (3π → 10σ), although the 1²Δ state (9σ → 3π) is very close in energy. In the case of the SiCN isomer the lowest excited state is 1²Δ, which arises from an excitation from the highest occupied σ orbital into the HOMO (9σ → 3π) and lies 3.6 eV above the ground state. SiCN should present very strong absorptions at 4.9 and 6.1 eV whereas SiNC should have relatively strong absorptions in the region of 5.7–5.9 eV. The smallest adiabatic energy gaps with respect to the ground state of SiNC and SiCN are very close (about 2.8 eV) and the excited state is the same 1²A′, which has angular equilibrium geometries for both isomers. We have determined accurate values for enthalpies of formation of the two linear doublet forms and .     

Second-sphere coordination in hexaamminecobalt(III) salt with organic sulphonate anion: Synthesis, characterisation and X-ray crystal structure of [Co(NH3)6](CH3SO3)3

Reaction of hexaamminecobalt(III) chloride with the silver salt of methanesulphonic acid in aqueous medium (1:3 molar ratio) forms hexaamminecobalt(III) methanesulphonate, [Co(NH₃)₆](CH₃SO₃)₃, in high yield. This cobalt(III) complex has been characterized by spectroscopic techniques (UV/visible, IR and NMR) and its solubility product determined. The X-ray crystal structure shows that the [Co(NH₃)₆]³⁺ cations interact at the second sphere by sharing edges with the anions, via N–H  O hydrogen bonds. The structure is related to that of [Co(NH₃)₆]Cl(CH₃SO₃)₂, but is modified to accommodate additional anions in place of Cl⁻.     

Supramolecular architecture of cadmium(II)–terephthalate complexes having a tridentate or tetradentate Schiff base as blocking coligand

Two new cadmium(II)–terephthalate complexes, _∞¹{[Cd₂(μ-terephthalate)₂(L¹)₂]·9H₂O} (1) and [{Cd(H₂O)(L²)}₂(μ-terephthalate)](terephthalate) · 10H₂O (2), where L¹ = (E)-N¹,N¹-diethyl-N²-(1-(pyridin-2-yl)ethylidene)ethane-1,2-diamine; L² = N,N′-bis-(1-pyridin-2-yl-ethylidene)-ethane-1,2-diamine; have been synthesized by a conventional solution method. Characterization by single crystal X-ray crystallography shows that compound 1 is composed of 1-D polymeric zig-zag chains with distorted pentagonal-bipyramidal cadmium centers. Compound 2 consists of centrosymmetric dinuclear complexes with a distorted pentagonal-bipyramidal cadmium center in which one terephthalate ligand bridges the metal centres and another terephthalate anion with water of crystallization forms a H-bonding network.     

An anionic chromogenic sensor based on protonated Reichardt’s pyridiniophenolate

An anionic sensor based on Reichardt’s betaine is described here. The dye is blue-green in chloroform but becomes colorless under protonation. Increasing amounts of different anions were added into the solution of the protonated dye. The addition of F⁻ and caused the reappearance of the original blue-green color, while the addition of I⁻ made the solution of the protonated dye yellow. The observations are discussed based on the fact that F⁻ and can act as bases accepting a proton from the protonated dye and also in relation to the formation of a complex between the protonated dye and iodide.     

Excess molar enthalpies of binary mixtures containing ethylene glycols or poly(ethylene glycols) + ethyl alcohol at 308.15 K and atmospheric pressure

Excess molar enthalpies, , of binary mixtures containing ethylene glycols and poly(glycols) + ethyl alcohol were measured by a flow microcalorimeter at 308.15 K and at atmospheric pressure over the whole composition range. Binary mixtures contain ethyl alcohol + ethylene glycol, + di(ethylene glycol), + tri(ethylene glycol), + tetra(ethylene glycol), + poly(ethylene glycol)-200, + poly(ethylene glycol)-300, + poly(ethylene glycol)-400, + poly(ethylene glycol)-600. Effects of the molecular weight distribution (MWD), of the polymer were investigated too, by preparing three additional samples of poly(ethylene glycol) with the same number average molecular weight (M_n ≈ 300), but different MWD. For all mixtures, results were fitted to the Redlich–Kister polynomial. curves are asymmetrical, showing positive values which vary from 280 J mol⁻¹ (diethylene glycol + ethyl alcohol) to 1034 J mol⁻¹ (mixture containing PEGs (200 + 400) + ethyl alcohol). Effects of changes in the glycols chain length and in MWD on the molecular interactions among the mixture components are discussed.     

Hydrothermal synthesis and crystal structural characterization of two new modified polyoxometalates constructed of positive and negative metal–oxo cluster ions

Two new interesting polyoxometalate derivatives 1 and 2 constructed of modified metal–oxo cluster ions carrying positive and negative changes, respectively, was hydrothermally prepared and structurally characterized by IR, ESR, XPS, elemental analysis and X-ray crystallography. The result of structure determination shows that compound 1 and 2 are isostructural and both contain polyoxocation and polyoxoanion, and both cation and anion are built on mixed Mo–V tetra-capped pseudo-Keggin units with P centre, [Mo₈V₈O₄₀(PO₄)]ⁿ⁻, bonded to four or two [Ni(2,2′-bipy)₂H₂O]²⁺ complexes, respectively, via terminal oxygen of the capping V atoms. Magnetism measurement indicates that there exists antiferromagnetic interaction in complex 1 and 2.     

A new polar supramolecular 3D framework [Zn(pyz)(H2O)4]pht

A new Zn(II) complex, [Zn(pyz)(H₂O)₄]pht (1) (pyz=pyrazine; pht=1,2-benzenedicarboxylate) has been hydrothermally synthesized and characterized. Complex 1 features a novel polar 3D framework with a 1D polycationic chain , between which pht²⁻ dianions are encapsulated via the supramolecular interaction. Its powder SHG is of about three times as large as that of KH₂PO₄.