Linear solvation energy relationships of anionic dimeric surfactants in micellar electrokinetic chromatography I. Effect of the length of a hydrophobic spacer

The influence of the length of a flexible hydrophobic spacer on the selectivity of anionic dimeric surfactants was investigated. Disodium 1,omega-bis(decyloxymethyl)-dioxa alkane-1,omega disulfates with a spacer containing an ethylene, butylene, hexylene, octylene, decylene or dodecylene group were synthesized, and four of these were evaluated for use in micellar electrokinetic chromatography (MEKC) via linear solvation energy relationships (LSERs). There were no significant differences in the system constants of these surfactants, indicating that their micelles all have a very similar interface with the aqueous phase, regardless of the length of the hydrophobic spacer. Compared to sodium dodecylsulfate (SDS), these dimeric surfactants are slightly more cohesive, interact better with polarizable compounds, and are somewhat better hydrogen bond acceptors and worse hydrogen bond donors, while there is no difference in dipolarity. The critical micelle concentrations (CMCs) of these surfactants were in the order of 1mM, except for the dimeric surfactant with a spacer containing an ethylene group, which had a CMC <0.03 mM.     

Influence of ester and amide-containing surfactant headgroups on selectivity in micellar electrokinetic chromatography

The selectivity differences between six anionic surfactants in micellar electrokinetic chromatography (MEKC) are presented and the structural influence of the surfactant head-group is investigated. It was determined that the surfactant structure can have a significant impact on retention and selectivity. Linear solvation energy relationships (LSERs) are used to study the role of solute size, polarity/polarizability, and hydrogen bonding characteristics in determining retention and selectivity. While both the solute size and hydrogen bond accepting ability were found to be the most important factors in solute retention, the hydrogen bonding characteristic of the solutes have the largest influence on selectivity differences between surfactants.     

Polymeric sulfated surfactants with varied hydrocarbon tail: II. Chemical selectivity in micellar electrokinetic chromatography using linear solvation energy relationships study

The effect of hydrocarbon chain length on chemical selectivity in micellar electrokinetic chromatography (MEKC) was investigated using polymeric sulfated surfactants: poly-(sodium 7-octenyl sulfate), poly(sodium 8-nonenyl sulfate), poly(sodium 9-decenyl sulfate), and poly(sodium 10-undecenyl sulfate). Linear solvation energy relationships (LSERs) and free energy of transfer studies were conducted to predict the selectivity differences between the four polymeric surfactants. The overall nature of the solute/ polymeric micelle interactions was found to be different despite the fact that all polymeric surfactants have the same head group. The polar character and acidic strength of the polymeric surfactant are found to decrease as the hydrocarbon chain length of the surfactant is increased. On the other hand, the polarizability of the polymeric sulfated surfactants increases (upon interacting with solute lone-pair electrons) with increasing hydrocarbon chain length. The LSER results show that the solute size and hydrogen bond accepting ability play the key roles in MEKC retention.     

Characterization of chemical selectivity in micellar electrokinetic chromatography. VI. Effects of surfactant counter-ion

Linear solvation energy relationships and free energy of transfer data were used to evaluate the influence of the surfactant counter-ion on selectivity in micellar electrokinetic chromatography. It was determined that selectivity differences are dependent on the valency of the counter-ion but not the type of counter-ion. Monovalent surfactants, sodium dodecyl sulfate (SDS) and lithium dodecyl sulfate, have nearly identical selectivity behavior. The divalent surfactants, magnesium didodecyl sulfate and copper didodecyl sulfate also show very similar behavior. However, when the divalent counter-ion species is compared to SDS under similar conditions, significant differences are observed. Most notably, the utilization of divalent counter-ion species of dodecyl sulfate surfactants causes the micelles to become more hydrophobic and a weaker hydrogen bond donating pseudo-stationary phases. It is believed that the divalent counter-ions reduce the electrostatic repulsion between the surfactant head groups and therefore, increase the chain packing of the monomers in the micelle aggregates. This reduces the degree of hydration of the micellar palisade layer leading to a decreased ability of the micelle to participate in polar/polarizable and hydrogen bonding interactions with solute molecules.     

Separation of cationic analytes by nonionic micellar electrokinetic chromatography using polyoxyethylene lauryl ether surfactants with different polyoxyethylene length

Although nonionic micellar electrokinetic chromatography is used for the separation of charged compounds that are not easily separated by capillary zone electrophoresis, the effect of the hydrophilic moiety of the nonionic surfactant has not been studied well. In this study, the separation of ultraviolet‐absorbing amino acids was studied in electrokinetic chromatography using neutral polyoxyethylene lauryl ether surfactants (Adekatol) in the separation solution. The effect of the polyethylene moiety (the number of repeating units was from 6.5 to 50) of the hydrophobic test amino acids (methionine, tryptophan, and tysorine) was studied using a 10 cm effective length capillary. The separation mechanism was based on hydrophobic as well as hydrogen bonding interactions at the micellar surface, which was made of the polyoxyethylene moiety. The length of the polyoxyethylene moiety of the surfactants was not important in nonionic micellar electrokinetic chromatography mode.     

Binary mixed micelles of chiral sodium undecenyl leucinate and achiral sodium undecenyl sulfate: I. Characterization and application as pseudostationary phases in micellar electrokinetic chromatography

Sodium 10-undecenyl sulfate (SUS), sodium 10-undecenyl leucinate (SUL) and their five different mixed micelles at varied percent mole ratios were prepared. The critical micelle concentration (CMC), C₂₀, γ_CMC, partial specific volume, methylene group selectivity, mobilities and elution window were determined using a variety of analytical techniques. These surfactant systems were then evaluated as novel pseudostationary phases in micellar electrokinetic chromatography (MEKC). As a commonly used pseudostationary phase in MEKC, sodium dodecyl sulfate (SDS) was also evaluated. The CMC values of SUS and SUL were found to be 26 and 16 mM, respectively, whereas the CMC of mixed surfactants was found to be very similar to that of SUL. The C₂₀ values decreased dramatically as the concentration of SUL is increased in the mixed micelle. An increase in SUL content gradually increased the methylene group selectivity making the binary mixed surfactants more hydrophobic. Linear solvation energy relationships (LSERs) and free energy of transfer studies were also applied to predict the selectivity differences between the surfactant systems. The cohesiveness and the hydrogen bond acidic character of the surfactant systems were found to have the most significant influence on selectivity and MEKC retention. The SUS and SDS showed the strongest while SUL showed the weakest hydrogen bond donating capacity. The basicity, interaction with n and π-electrons of the solute and dipolarity/polarizability were the least significant factors in LSER model for the surfactant systems studied. Free energies of transfer of selected functional groups in each surfactant systems were also calculated and found to be in good agreement with the LSER data.     

Polymeric sulfated surfactants with varied hydrocarbon tail: I. Synthesis, characterization, and application in micellar electrokinetic chromatography

The influence of surfactant hydrocarbon tail on the solute/pseudostationary phase interactions was examined. Four anionic sulfated surfactants with 8-, 9-, 10-, and 11-carbon chains having a polymerizable double bond at the end of the hydrocarbon chain were synthesized and characterized before and after polymerization. The critical micelle concentration (CMC), polarity, and aggregation number of the four sodium alkenyl sulfate (SAIS) surfactants were determined using fluorescence spectroscopy. The partial specific volume of the polymeric SAIS (poly-SAIS) surfactants was estimated by density measurements and capillary electrophoresis (CE) was employed for determination of methylene selectivity as well as for elution window. The CMC of the monomers of SAIS surfactants decrease with increase in chain length and correlated well when fluorescence method was compared to CE. The physicochemical properties (partial specific volume, methylene selectivity, electrophoretic mobility, and elution window) increased with an increase in chain length. However, no direct relationship was found between the aggregation number and the length of hydrophobic tail of poly-SAIS surfactants. These polymeric surfactants were then used as pseudostationary phases in micellar electrokinetic chromatography (MEKC) to study the retention behavior and selectivity factor of 36 benzene derivatives with different chemical characteristics. Although variation in chain length of the polymeric surfactants significantly affects the retention of nonhydrogen bonding (NHB) benzene derivatives, these effects were less pronounced for hydrogen bond acceptor (HBA) and hydrogen bond donor (HBD) benzene derivatives. Therefore, hydrophobicity of poly-SAIS surfactants was found to be a major driving force for retention of NHB derivatives. However, for several benzene derivatives (NHB, HBA, and HBD) significantly higher selectivity factor was observed with longest chain polymeric surfactant (e.g., poly(sodium 10-undecenyl sulfate), poly-SUS) compared to shorter chain polymeric surfactant (e.g., poly(sodium 7-octenyl sulfate), poly-SOcS). In addition, the effect of the surfactant hydrophobic chain was also found to have some impact on migration order of NHB, HBA, and HBD benzene derivatives.     

Micellar selectivity triangle for classification of chemical selectivity in electrokinetic chromatography

A novel micellar selectivity triangle (MST) is developed and used to characterize and classify the chemical selectivities of pseudo-phases in electrokinetic chromatography (EKC). The MST scheme is, in concept, similar to the widely known solvent selectivity triangle (SST) originally developed by Snyder. However, the MST is based on linear solvation energy relationships. Thus it incorporates the solvation characteristics of both the pseudo-phase and the bulk solvent; while the SST is basically for classification of pure solvents. The similarities and differences of these pseudo-phases are determined by the relative scales of hydrogen bond donating ability (X_b), hydrogen bond accepting ability (X_a) and dipolarity (X_s). The MST scheme is used for characterization and classification of a wide range of pseudo-phases such as micelles, polymers, vesicles, liposomes, as well as mixed systems such as mixed micelles, mixed polymer–surfactants, organically modified pseudo-phases, etc. Over seventy pseudo-phases were examined and four clusters of pseudo-phases with different selectivity patterns are recognized that include pseudo-phases with strong hydrogen bond acidities (e.g. fluorinated micelles or micelles modified with fluorinated alcohols), strong hydrogen bond acceptor pseudo-phases (such as bile salts, liposomes, microemulsions, as well as biphasic octanol–water system), strong dipolar phase of a class of polymeric pseudo-phase, and pseudo-phases with intermediate hydrogen bonding and dipolarity [like sodium dodecyl sulfate (SDS) and its analogs as well as organically modified SDS]. The MST scheme is also useful in identifying pseudo-phases that closely resemble the selectivities of octanol–water for determination of octanol–water partition coefficients by EKC.     

聚合物在胶束电动色谱中的应用

本文回顾了自1992 年聚合物第一次被用作胶束电动色谱准固定相以来聚合胶束、聚合物表面活性剂和枝状高分子在这方面的研究进展, 并与常用表面活性剂的性能进行了对比。     

Selectivity patterns in micellar electrokinetic chromatography: Characterization of fluorinated and aliphatic alcohol modifiers by micellar selectivity triangle

The usefulness of the micellar selectivity triangle (MST) for prediction and interpretation of separation patterns in micellar electrokinetic chromatography (MEKC) separations is presented. In addition, we demonstrate the capability of controlling selectivity properties of micelles through addition of organic modifiers with known solvation properties as predicted by MST. The examples are modification of the hydrogen bond donor (HBD) micelle of lithium perfluorooctanesulfonate, the hydrogen bond acceptor (HBA) micelle of tetradecyltrimethylammonium bromide, and the sodium dodecyl sulfate micelles with intermediate hydrogen bonding properties with two hydrophobic organic modifiers. One is an aliphatic alcohol, n-pentanol that can act as both a HBA and a HBD; by contrast, the other organic modifier is a fluorinated alcohol, hexafluoroisopropanol that is a strong HBD modifier and would enhance the hydrogen bond donor strength of micelles. A test sample composed of 20 small organic solutes representing HBA, HBD, and non-hydrogen bond aromatic compounds was carefully selected. The trends in retention behavior of these compounds in different micelles are consistent with the selectivity patterns predicted by the MST scheme. To the best of our knowledge, this is the first report on the unique selectivity of fluorinated alcohols as modifiers in MEKC. These results demonstrate the usefulness of the MST scheme for identifying pseudo-phases with highly similar or different selectivities and can serve as a guide for judicious selection of modifiers to create pseudo-phases with desired selectivity behavior on a rational basis.     

Synthesis and physicochemical characterization of alkanedyil-α-ω-bis(dimethyldodecylammonium) bromide, 12-s-12,2Br(-), surfactants with s=7, 9, 11 in aqueous medium

In this work, three didodecyl dicationic dibromide dimeric surfactants 12-s-12,2Br(-), with different methylene spacer lengths (s=7, 9, and 11) were prepared and characterized and their properties compared to those of 12-s-12,2Br(-) surfactants with s=2, 3, 4, 5, 6, 8, 10, and 12. Information about the critical micelle concentration, the micellar ionization degree, the average aggregation number and the polarity of the interfacial region, and microviscosity of the micellar interior was obtained by using different techniques. Their surface activity was investigated by means of surface tension measurements. Micellization was also studied by using (1)H NMR and diffusion NMR (DOSY) spectroscopy as well as isothermal titration calorimetry. The values of the thermodynamic parameters show that the dimeric surfactants micellization is exothermic and driven by entropy. The occurrence of morphological transitions upon increasing surfactant concentration was studied, and the results indicate that the spacer length, s, plays a key role in the micellar growth of 12-s-12,2Br(-) aggregates. The value of s not only control the magnitude of C(*), the surfactant concentration above which the morphological transition from spherical micelles into elongated ones occurs, but also the sign of the enthalpy change accompanying the sphere-to-rod transition.     

Molecular recognition by chiral cationic micellar and micelle-like aggregates in electrokinetic capillary chromatography

We examined the enantiomer separation with micelles and a micelle-like polymer made with trimethylammonium-terminated surfactants all of whose hydrocarbon chains contain hydrogen bonding valinediamide moieties in electrokinetic chromatography (EKC). The surfactants used were 3-(N-dodecanoyl-L-valylamino)-propyltrimethylammonium bromide (surfactant 1) and 6-(N-nonanoyl-L-valylamino)hexyl-trimethylammonium bromide (surfactant 2); the micelle-like polymer was derived from 3-(N-10-undecenoyl-L-valyl)aminopropyltrimethylammonium bromide (surfactant 3). N-Acylamino acids and their isopropyl esters were separated with enantiomers with the same configuration as the chiral surfactant and which were retained to a greater extent than the counterparts in micelles. The micellar hydrophobic environment, in which amides function as hydrogen bonding sites with solutes, and ceased micellar kinetic association-dissociation with polymerization are discussed.     

Aggregation numbers of cationic oligomeric surfactants: a time-resolved fluorescence quenching study

The micelle aggregation numbers (N(agg)) of several series of cationic oligomeric surfactants were determined by time-resolved fluorescence quenching (TRFQ) experiments, using advantageously 9,10-dimethylanthracene as fluorophore. The study comprises six dimeric ("gemini"), three trimeric, and two tetrameric surfactants, which are quaternary ammonium chlorides, with medium length spacer groups (C(3)-C(6)) separating the individual surfactant fragments. Two standard cationic surfactants served as references. The number of hydrophobic chains making up a micellar core is relatively low for the oligomeric surfactants, the spacer length playing an important role. For the dimers, the number decreases from 32 to 21 with increasing spacer length. These numbers decrease further with increasing degree of oligomerization down to values of about 15. As for many conventional ionic surfactants, the micelles of all oligomers studied grow only slightly with the concentration, and they remain in the regime of small micelles up to concentrations of at least 3 wt %.     

Adjusting selectivity in micellar electrokinetic capillary chromatography with 1,2-hexanediol

In this report, we introduce a new micelle modifier useful to alter selectivity in micellar electrokinetic capillary chromatography (MECC). 1,2-Hexanediol acts as a class I organic modifier in that its effects are on the sodium dodecyl sulfate (SDS) micellar rather than the surrounding aqueous phase. This characteristic allows 1,2-hexanediol to improve resolution when applied at concentrations as low as 20 mM (0.25% v/v) by altering the selectivity observed with SDS alone. The effects of 1,2-hexanediol on the critical micelle concentration of SDS, electroosmotic flow, electrophoretic mobility of the SDS micelle, and reproducibility are presented. 1,2-Hexanediol had little impact on the migration time window at concentrations below 100 mM. Changes in selectivity induced by 1,2-hexanediol for a large set of model compounds are presented. Analytes capable of forming hydrogen bonds tend to decrease their interactions with the micellar phase while nonhydrogen bonding analytes increase their interactions. The usefulness of 1,2-hexanediol was demonstrated by examining its effects on the separation of dansylated amino acids. Eighteen of twenty amino acids could be separated with a resolution greater than 1.6 within 1600 s using a combination of 1,2-hexanediol and isopropanol.     

Application of linear solvation energy relationships to polymeric pseudostationary phases in micellar electrokinetic chromatography

Polymerized sodium 11-acrylamidoundecanoate (poly(Na 11-AAU)) was used as a pseudostationary phase (PSP) for micellar electrokinetic chromatography to separate uncharged compounds. The polymer PSP showed signifcantly different solute migration behaviors from conventional micelles including sodium dodecyl sulfate and poly (sodium 10-undecylenate), giving high separation efficiencies (>200000 theoretical plates/m). Linear solvation energy relationships were used to evaluate and characterize the chemical interactions that influence the retention behavior in the poly (Na 11-AAU) micellar system. It was found that the solute volume and solute hydrogen bond basicity mainly influenced the retention. The characteristic feature of the poly (Na 11-AAU) micellar system is that the micelle has a significantly higher capacity for dipole-dipole and dipole-induced dipole interactions as well as a slightly higher capacity for electron pair interactions than the aqueous phase. Due to its unique selectivity, the poly(Na 11-AAU) micellar system would become an attractive new option for selectivity optimization on methods development.     

Determination of antitubercular drugs by micellar electrokinetic capillary chromatography (MEKC)

A method for the determination of isoniazid (ISO), pyrazinamide (PYR) and rifampicin (RIF) in pharmaceutical products, by micellar electrokinetic capillary chromatography (MEKC) with ultraviolet detection is described. The influence of pH, concentration of surfactants, buffer and organic solvents, over the separation were studied as experimental variables. The optimal separation was carried out at 30 degrees C and 20 kV, using a 40 mM borate buffer and 100 mM sodium dodecylsulphate (SDS) adjusted to pH 8.5. Under these conditions, the analysis is accomplished in about 8 min. The method was applied to the determination of these compounds in different pharmaceuticals with good results when compared with a reference liquid chromatographic (LC) method.     

Tailoring the separation selectivity of metal complexes and organometallic compounds resolved by capillary electrophoresis using auxiliary separation processes

The use of auxiliary separation mechanisms to manipulate the separation selectivity of metal complexes and organometallic species is reviewed. Auxiliary separation mechanisms included in the review are micellar electrokinetic capillary chromatography, ion-pairing and ion-exchange electrokinetic chromatography. This paper discusses how these secondary mechanisms can be effectively employed to tailor separation selectivity.     

Cleavable cationic antibacterial amphiphiles: synthesis, mechanism of action, and cytotoxicities

The development of novel antimicrobial agents having high selectivity toward bacterial cells over mammalian cells is urgently required to curb the widespread emergence of infectious diseases caused by pathogenic bacteria. Toward this end, we have developed a set of cationic dimeric amphiphiles (bearing cleavable amide linkages between the headgroup and the hydrocarbon tail with different methylene spacers) that showed high antibacterial activity against human pathogenic bacteria (Escherichia coli and Staphylococcus aureus) and low cytotoxicity. The Minimum Inhibitory Concentrations (MIC) were found to be very low for the dimeric amphiphiles and were lower or comparable to the monomeric counterpart. In the case of dimeric amphiphiles, MIC was found to decrease with the increase in the spacer chain length (n = 2 to 6) and again to increase at higher spacer length (n > 6). It was found that the compound with six methylene spacers was the most active among all of the amphiphiles (MICs = 10-13 μM). By fluorescence spectroscopy, fluorescence microscopy, and field-emission scanning electron microscopy (FESEM), it was revealed that these cationic amphiphiles interact with the negatively charged bacterial cell membrane and disrupt the membrane integrity, thus killing the bacteria. All of the cationic amphiphiles showed low hemolytic activity (HC(50)) and high selectivity against both gram-positive and gram-negative bacteria. The most active amphiphile (n = 6) had a 10-13-fold higher HC(50) than did the MIC. Also, this amphiphile did not show any cytotoxicity against mammalian cells (HeLa cells) even at a concentration above the MIC (20 μM). The critical micellar concentration (CMC) values of gemini surfactants were found to be very low (CMC = 0.30-0.11 mM) and were 10-27 times smaller than the corresponding monomeric analogue (CMC = 2.9 mM). Chemical hydrolysis and thermogravimetric analysis (TGA) proved that these amphiphiles are quite stable under both acidic and thermal conditions. Collectively, these properties make the newly synthesized amphiphiles potentially superior disinfectants and antiseptics for various biomedical and biotechnological applications.     

Synthesis of New Dimeric Amphiphiles. Influence of Anomeric Configuration and Spacer Functionality on Interfacial Properties

ABSTRACT

The synthesis of new dimeric carbohydrate-based surfactants was performed connecting two butyl glucopyranosides with a spacer through ester and ether linkages. Critical micellar concentrations were determined to study the influence of anomeric configuration and spacer functionality on surfactant properties.     

Analysis of protamine peptides in insulin pharmaceutical formulations by capillary electrophoresis

Protamines are a group of highly basic peptides that are sometimes added to insulin formulations to prolong the pharmacological action. In this study, different methods were investigated to identify protamine in insulin formulations. Capillary electrophoresis in aqueous and non‐aqueous media was tested to separate these peptides with very close amino acid sequences. Different buffers (phosphate or formate, both acidified) and various additives (principally negatively charged and neutral surfactants) were investigated to optimize peptide separation. Finally, a micellar electrokinetic capillary chromatography method using a capillary of 120 cm effective length and an aqueous background electrolyte made up of 100 mM phosphate buffer (pH 2) and 50 mM Thesit® gave the best results, providing the separation of the four major protamine peptides within 25 min.