Interaction of a diazoresin with sodium dodecyl sulfate in aqueous solution

The interaction between a diazoresin and sodium dodecyl sulfate (SDS) in aqueous solution was investigated. It was found that the diazoresin-SDS complex dissolves in water containing excessive SDS. The thermal stability and photo-sensitivity of the diazoresin-SDS complex was also studied. The results show that the complex possesses an increased thermal stability while preserving its high photo-sensitivity. An aqueous composition containing diazoresin and SDS was used directly to prepare a photosensitive coating.     

F and C spectra of fluorinated and partially fluorinated vinyl alkyl ethers

Fluorine, hydrogen, and ¹³C NMR spectral data have been obtained for vinyl alkyl ethers containing fluorines. Some of the molecules are perfluorinated and others include hydrogen, bromine, and chlorine substituents. New generalizations regarding FF spin-spin coupling are developed and used, along with previously recognized correlations, in the confirmation of structures and the assignments of resonances. ¹³C spectroscopy, especially the analysis of ¹³C¹⁹F coupling, is critical in several of the structure determinations. Chlorine isotope effects on fluorine chemical shifts are observed when the chlorine and fluorine are attached to the same carbon, and are also used in the structure analyses. Long-range couplings between fluorines in the vinyl group and fluorines in the alkyl group are interpreted in terms of molecular geometry which allows certain of the alkyl fluorines to “touch” the fluorines cis and gem to the ether oxygen but not the fluorine trans to the oxygen. Two bond ¹³C¹⁹F coupling across the vinyl double bond is found to vary dramatically with the electronegativity of the vinyl substituents in the ethers, in accordance with previous observations for olefins.     

Aggregation properties of cationic gemini surfactants with partially fluorinated spacers in aqueous solution

The aggregation properties of cationic gemini surfactants alkanediyl-alpha,omega-bis(dodecyldimethylammonium bromide), [C(12)H(25)(CH(3))(2)N(CH(2))(m)(CF(2))(n)(CH(2))(m))N(CH(3))(2)C(12)H(25)]Br(2) [where 2m + n = 12 and n = 0, 4, and 6; designated as 12-12-12, 12-12(C(4)(F))-12, and 12-12(C(6)(F))-12, respectively] have been studied by microcalorimetry, time-resolved fluorescence quenching, and electrical conductivity. Compared with a fully hydrocarbon spacer of 12-12-12, the fluorinated spacer with a lower ratio of CF(2) to CH(2) in 12-12(C(4)(F))-12 tends to disfavor the aggregation, leading to larger critical micelle concentration (cmc), lower micelle aggregation number (N), and less negative Gibbs free energy of micellization (DeltaG(mic)). However, the fluorinated spacer with a higher ratio of CF(2) to CH(2) in 12-12(C(6)(F))-12 may prompt the aggregation, resulting in lower cmc, higher N, and more negative DeltaG(mic). It is also noted that enthalpy change of micellization (DeltaH(mic)) for 12-12(C(4)(F))-12 is the most exothermic, but the values of DeltaH(mic) for 12-12-12 and 12-12(C(6)(F))-12 are almost the same. These results are rationalized in terms of competition among the enhanced hydrophobicity and the rigidity of the fluorinated spacer, and the variation of immiscibility of the fluorinated spacer with the hydrocarbon side chains.     

十二烷基硫酸钠与羟乙基纤维素的相互作用

本文用表面张力(γ)和电导率(κ)方法研究了阴离子表面活性剂十二烷基硫酸钠(SDS)与天然纤维素的水溶性改性物羟乙基纤维素(HEC)的相互作用.实验结果表明,SDS-HEC溶液的γ-lgcSDS曲线和κ～CSDS曲线均呈现双拐点特征,并且γ-lgcSDS曲线上两个SDS临界浓度值(c1 )γ及(c2)γ,与κ～CSDS...     

Interaction between tetracycline and smectite in aqueous solution

The fate and transport of commonly used antibiotics in soil and groundwater have attracted renewed studies due to increased sensitivities of analytical instruments and thus frequent detections of these compounds even in treated wastewater. Smectite, an important soil component, has large surface area and high cation exchange capacity, while tetracycline (TC) can exist in different forms and charges under different pH conditions. Thus, the interaction between smectite and TC in aqueous systems is of great importance. This research focused on elucidating the mechanisms of TC uptake by smectite, in terms of TC adsorption, cation desorption, and pH changes associated with TC adsorption by smectite and intercalation in smectite. TC adsorption onto smectite was a relatively fast process even though most of the adsorption sites were in the interlayer position involved in intercalation as confirmed by the expansion of d₀₀₁ spacing. The TC adsorption capacity was equivalent to 0.74–1.11 times the cation exchange capacity for three of the four smectite minerals studied. Accompanying TC adsorption was simultaneous adsorption of H⁺, resulting in protonation of TC on the dimethylamine group. At higher TC input concentrations further adsorption of H⁺ resulted in the ratio of H⁺ adsorbed to TC adsorbed greater than one, suggesting that additionally adsorbed H⁺ could serve as counterions to partially offset the negative charges on the tricarbonyl or phenolic diketone functional groups. The positive correlations between cations desorbed and TC adsorbed, as well as TC adsorbed and H⁺ adsorbed, provided a first time evidence to confirm cation exchange as the main mechanism of TC uptake, even under neutral pH conditions.     

Tetrabutylammonium alkyl carboxylate surfactants in aqueous solution: self-association behavior, solution nanostructure, and comparison with tetrabutylammonium alkyl sulfate surfactants

A series of long and ultralong chain tetrabutylammonium alkyl carboxylate (TBACm, TBA = tetrabutylammonium ion; Cm = carboxylate ion C(m-1)H(2)(m-1)CO(2)(-) of total carbon number m) surfactants have been obtained by direct neutralization of the fatty acids with m = 12, 14, 18, 22, and 24 by tetrabutylammonium hydroxide. Time-resolved fluorescence quenching has been used to determine the micelle aggregation number (N) of the surfactants with m = 12, 14, and 18 in the temperature range 10-50 degrees C and of the surfactants with m = 22 and 24 in the temperature range 25-60 degrees C. In all instances the values of N were well below those that can be calculated for the maximum spherical micelle formed by surfactants with the same alkyl chain as the investigated surfactants on the basis of the oil drop model for the micelle core. The microstructure of selected solutions of TBAC22 was examined using transmission electron microscopy at cryogenic temperature and compared to the microstructure of solutions of TBA dodecyl and tetradecyl sulfates. These observations generally confirmed the findings of TRFQ. The self-association behavior of these anionic surfactants with TBA counterions is explained on the basis of the large size and the hydrophobicity of the tetrabutylammonium ions. The important differences in behavior that have been evidenced between tetrabutylammonium alkyl carboxylates and alkyl sulfates are discussed in terms of differences in distribution of the surfactant electrical charge on the headgroup and alkyl chain predicted by quantum chemical calculations (Langmuir 1999, 15, 7546).     

Interaction between styrene–ethylene oxide block copolymers and sodium lauryl sulfate in aqueous solution

Interactions of water-soluble AB block copolymers of polystyrene and poly(ethylene oxide) with sodium lauryl sulfate (SLS) in aqueous solution were investigated by high-resolution proton magnetic resonance (NMR). The viscosity in aqueous SLS solution was also measured. From the NMR results in D₂O, it appears that molecular motions of the polystyrene blocks of the copolymer in aqueous solution are activated by interaction between the polystyrene blocks and the added SLS. From solution viscosity, on the other hand, it is apparent that a complex is formed between the copolymer and SLS and that it exhibits typical polyelectrolyte properties. The polyelectrolyte character is attributable largely to intrachain repulsions between like charges of the SLS anions adsorbed on the poly(ethylene oxide) blocks of the copolymers since the polystyrene blocks are insoluble in water and the styrene content is less than 10%.     

Investigations on liquid crystalline partially fluorinated alkyl and succinimidyl benzoates

The synthesis and mesophase properties of partially fluorinated alkoxy‐substituted benzoic alkyl and succinimidyl (NHS) esters with one, two and three perfluoroalkyl alkoxy chains are reported. The mesophases were studied using differential scanning calorimetry (DSC), polarizing optical microscopy and X‐ray diffraction of non‐oriented samples. The SmA phases of the one‐chain methyl esters are monotropic, while those of the one‐chain NHS esters are enantiotropic. The more wedge‐shaped two‐ and three‐chain alkyl esters do not form mesophases, whereas the succinimidyl analogues exhibit hexagonal columnar phases. Their enhanced mesophase stability is caused by the higher polarity of the succinimidyl ring with respect to the alkyl ester groups. Aggregation of the dipolar succinimidyl groups, together with the microsegregation of the lipophilic and fluorophilic segments of the partially fluorinated alkoxy chains, is assumed to lead to a threefold structured morphology in both the SmA and the Col_h phases. This threefold structuring can be regarded as analogous to known morphologies of ABC triblock copolymers.     

Investigations on liquid crystalline partially fluorinated alkyl and succinimidyl benzoates

The synthesis and mesophase properties of partially fluorinated alkoxy-substituted benzoic alkyl and succinimidyl (NHS) esters with one, two and three perfluoroalkyl alkoxy chains are reported. The mesophases were studied using differential scanning calorimetry (DSC), polarizing optical microscopy and X-ray diffraction of non-oriented samples. The SmA phases of the one-chain methyl esters are monotropic, while those of the one-chain NHS esters are enantiotropic. The more wedge-shaped two- and three-chain alkyl esters do not form mesophases, whereas the succinimidyl analogues exhibit hexagonal columnar phases. Their enhanced mesophase stability is caused by the higher polarity of the succinimidyl ring with respect to the alkyl ester groups. Aggregation of the dipolar succinimidyl groups, together with the microsegregation of the lipophilic and fluorophilic segments of the partially fluorinated alkoxy chains, is assumed to lead to a threefold structured morphology in both the SmA and the Col_h phases. This threefold structuring can be regarded as analogous to known morphologies of ABC triblock copolymers.     

Thermodynamic parameters of some partially fluorinated and hydrogenated amphiphilic enantiomers and their racemates in aqueous solution

Micellization properties of aqueous solutions of four enantiomeric/racemic pairs obtained from partially fluorinated octylesters (PFOEs) and hydrogenated dodecylesters (DDEs) of alanine and serine were investigated by electrical conductivity, surface tension and density measurements over the temperature range of (15 to 35) °C. The Krafft temperatures (T_Ks) of most of the esters were found to be below or near zero temperature. The critical micelle concentrations (cmcs) of the PFOEs were found to be larger than those of the DDEs from which it was calculated that a CF₂ group in the partially fluorinated chain is approximately equivalent to 1.8 CH₂ group in the hydrogenated dodecyl chain and there were no noteworthy differences in the cmcs of the L- and DL-forms of the studied amphiphiles. The thermodynamic quantities of micellization (ΔG_mic, ΔH_mic, ΔS_mic) and adsorption (ΔG_ad), and the adsorption parameters at the air/water interface, the surface excess concentration (Γ_max), the minimum area per head group of a molecule (A_min) and the efficiency in the surface tension reduction (pC₂₀), were also calculated. It was found that the micellization for DDE of alanine and the adsorption for PFOE of serine were more favoured than the other L-and DL-forms where the latter was in part as dimer at the air/water interface. Furthermore, except for the ΔH_mic values, there were no significant differences in these quantities for the L-and DL-forms of the studied systems. The mass density measurements showed that the apparent molal volumes ($V_{\phi }^{\text{cmc}}\text{,}{V}_{\phi }^{\text{mic}}$) of the hydrogenated esters were strikingly larger than those of the partially fluorinated ones, whereas the change of the apparent molal volume upon micellization ($\mathrm{\Delta }{V}_{\phi }^{\text{mic}}$) exhibited reverse behaviour, from which it was concluded that the micelles of the partially fluorinated esters were larger than those of the hydrogenated ones.     

Thermodynamics of micellization for partially fluorinated cationic gemini surfactants and related single-chain surfactants in aqueous solution

A series of partially fluorinated cationic gemini surfactants and their corresponding monomeric surfactants have been studied by isothermal titration microcalorimetry. The critical micelle concentration (CMC) and enthalpy of micellization (DeltaH(mic)) were obtained from calorimetric curves. The CMCs of the gemini surfactants are much lower than those of the corresponding monomeric surfactants and decrease with an increase in the number of fluorine atoms on the hydrophobic chain. The micellization of partially fluorinated cationic gemini surfactants is much more exothermic than that of the corresponding monomeric surfactants. Because of the incompatibility of hydrocarbon spacer and partially fluorinated chain, DeltaH(mic) values of the surfactants with a C6 spacer are more negative than those of the surfactants with a C12 spacer. The variations in the architecture of the fluorocarbon chain segments may be the reason of the irregularities in the change of DeltaH(mic) for the gemini surfactants. Moreover, the contribution of the enthalpy generally increases with an increase in the number of fluorine atoms.     

Smectic behaviour of methyl 4-alkoxybenzoates with a partially fluorinated alkyl chain

A series of 4-alkoxybenzoic acids 1[m,n] and their methyl esters 2[m,n] containing a partially fluorinated alkyl chain was prepared and their physical properties were investigated by optical, thermal and powder X-ray diffraction (XRD) methods. The former exhibits an SmC phase, while the latter form an SmA phase. XRD analysis indicated liquid-like character of the linking alkyl chains, and showed a decreasing layer thermal expansion coefficient from positive to negative upon increasing the degree of fluorination. The new esters 2[m,n] expanded the series and permitted analysis of trends in thermal stability of the SmA phase. The results demonstrate that the SmA–I transition temperature increases by about +20 K per CF₂CF₂ unit, and is destabilised by –5.6 K upon extending the hydrocarbon part by each CH₂CH₂ group. Data for the expanded series 2[m,n] were used for comparative analysis of mesogenic behaviour in two other series of derivatives of 1[m,n]. Synthetic methods for 1[m,n] and 2[m,n] are reviewed.     

Interaction between oppositely charged polyelectrolytes in aqueous solution

Oppositely charged polyelectrolytes interact in solution, forming polyelectrolyte complexes, which often appear as gel-like precipitates. This kind of complex formation was studied by means of calorimetric and rheological measurements. The enthalpy effects, though being fairly small, give some information about the binding strength of counterions to the macroion. We studied the system poly(p-styrene sulfonate)/poly(trimethylammonium-2-ethyl methacrylate) (PSS-PTMA), varying systematically the low molar mass counterions of PSS. In every case, the maximum of enthalpy was found around a 1:1 (mol:mol monomer units) composition of the complexes, with the shape of enthalpy versus composition-curve indicating a stoichiometric interaction. The maximum enthalpy decreased with increasing atomic mass of the counterion when the alkaline metal salts of PSS were used and no change was made on the side of the cationic polyelectrolyte. The salts of the alkaline earth metals gave a distinctly higher enthalpy. On the contrary, viscosity measurements showed a very broad minimum as a function of composition, indicating that the formation of non-stoichiometric complexes is also occurring. The conclusion of these observations is that the complex formation is stoichiometric with respect to the monomeric units, but not necessarily stoichiometric with respect to the entire macromolecules.     

Stripes of partially fluorinated alkyl chains: dipolar Langmuir monolayers

Stripelike domains of Langmuir monolayers formed by surfactants with partially fluorinated lipid anchors (F-alkyl lipids) are observed at the gas-liquid phase coexistence. The average periodicity of the stripes, measured by fluorescence microscopy, is in the micrometer range, varying between 2 and 8 microm. The observed stripelike patterns are stabilized due to dipole-dipole interactions between terminal- CF(3) groups. These interactions are particularly strong as compared with nonfluorinated lipids due to the low dielectric constant of the surrounding media (air). These long-range dipolar interactions tend to elongate the domains, in contrast to the line tension that tends to minimize the length of the domain boundary. This behavior should be compared with that of the lipid monolayer having alkyl chains, and which form spherical microdomains (bubbles) at the gas-liquid coexistence. The measured stripe periodicity agrees quantitatively with a theoretical model. Moreover, the reduction in line tension by adding traces (0.1 mol %) of cholesterol results, as expected, in a decrease in the domain periodicity.     

Self aggregation of binary mixtures of sodium dodecyl sulfate and polyoxyethylene alkyl ethers in aqueous solution

The mixed micelles of sodium dodecyl sulphate (SDS) with Brij35 and Brij 97 were studied separately by fluorescence measurement using pyrene as fluorescent probe. In the range of 0–1.0 mole fraction (X) of added SDS to Brij solutions, the cmc value of the mixed micelles varies from 0.085 to 8 mmol with Brij 35 and 0.04 to 8 mmol with Brij 97. The aggregation number also changes. A measure of the stability of mixed micelles is also presented. The interaction parameter ₁₂ and the chain–chain contribution parameter (B₁) are extracted from the analysis of the results. This parameter B₁ is related to the standard free energy change associated with the introduction of one ionic species into a nonionic micelle coupled with the release of one nonionic species from the micelle. The clouding behaviour of Brij 97 in the presence of SDS was investigated and the associated thermodynamic parameters of clouding were generated and discussed.     

Interaction between a stationary mercury electrode and a hydrogen bubble in an aqueous sodium dodecyl sulphate solution

The stability and rupture of thin liquid films formed from an aqueous solution of Na₂SO₄ (0.05 mol dm⁻³) in the presence of 5 × 10⁻⁵ mol dm⁻³ sodium dodecyl sulphate between a stationary mercury electrode and a hydrogen bubble has been investigated as a function of electrode potential. The electrostatic component of disjoining pressure has been calculated using the results of capacity measurement for the mercury-solution interface. Special attention has been paid to films formed on positively charged mercury surfaces. In this case, despite the positive electrode polarization, the outer Helmholtz plane potential is found to be negative due to the high surface activity of the dodecyl sulphate anion. The van der Waals component of disjoining pressure has been calculated on the basis of a double sheath model of the two interacting surfaces, taking into consideration the orientation of the adsorbed surfactant layers at the interfaces. Calculations of the total disjoining pressure can explain film stability at negative mercury potentials, but do not explain film rupture when the polarization of the mercury is positive. The existence of a hydrophobic attractive interaction is postulated in the latter case.     

明胶调控下单分散CaCO_3花瓣球形微粒的制备

近来,碳酸钙高技术附加价值产品的生产越来越多地进入公众的视野,同时环保、绿色等意识逐渐为人们所接受则为新型碳酸钙产品的发展提供了广阔的市场应用空间.碳酸钙微粒在造纸,涂料生产以及日化行业等工业领域有广泛的应用,例如在天然橡胶中添加一定的碳酸钙不仅可以节约昂贵的橡胶用量,降低成本,而且获得的抗张强度和耐磨性甚至要优于硫化橡胶;造纸工业中添加一定比例的碳酸钙则起到了增加纸张白度和柔顺性并降低成本的作用.     

Interaction between ethyl(hydroxyethyl)cellulose and sodium dodecyl sulphate in aqueous solution

Using sodium activity, viscosity, and cloudpoint measurements, it has been shown that sodium dodecyl sulphate (SDS) binds to ethyl(hydroxyethyl)cellulose in a cooperative manner. In the absence of salt the binding leads to an increase in the clouding temperature, but when a small amount of salt (0.01 molal) is present first a drastic decrease and then an equally drastic increase in the cloud point temperature is observed. The binding of SDS also initially leads to an increase in viscosity followed by a decreased viscosity at higher SDS concentrations. A molecular mechanism explaining the observed behavior is given.     

Striking differences between alkyl sulfate and alkyl sulfonate when mixed with cationic surfactants

The properties of alkyl sulfate and alkyl sulfonate are similar except for their Krafft points. However, alkyl sulfate and alkyl sulfonate behave quite differently when they are mixed with cationic surfactants and show some totally unexpected results. In this work sodium alkyl sulfate (C_nH_2n+1SO₄Na,C_nSO₄)–alkyl quaternary ammonium bromide [C_nH_2n+1N(C_mH_2m+1)₃Br, C_nN, m=1–4] mixtures and sodium alkyl sulfonate (C_nH_2n+1SO₃Na, C_nSO₃)–C_nN mixtures were studied. It was found that, in contrast to the single surfactants, C_nSO₃–C_nN mixtures were much more soluble than C_nSO₄–C_nN mixtures. Besides, the two kinds of catanionic surfactant mixtures were quite different in their phase behavior and aggregate properties. The results were interpreted in terms of the interactions between surfactant molecules, which were very different in the two kinds of mixed systems owing to the distinction between alkyl sulfate and alkyl sulfonate in the molecular charge distribution.