A thin alanine-polyethylene film dosimetry system with diffuse reflection spectrophotometric evaluation

Characteristics of a new alanine dosimeter in the shape of a thin film, with the measurement of optical absorption of the CH₃CHCOO^– radical is described. That type of dosimeter, ALA/DRS (for diffuse reflection spectrophotometry) is compared, to an alanine dosimeter with EPR evaluation (ALA/EPR for short). In many respects the simple ALA/DRS version, as the alanine-polyethylene composite is superior. The paper shows the importance of the new experimental approach to free radical research in solid state radiation chemistry.     

The orientation of the dispersed phase and crystals in an injection-molded impact polypropylene copolymer

The orientation of the dispersed phase and crystals in the injection-molded bar of an impact polypropylene copolymer (IPC) containing isotactic polypropylene (iPP), ethylene-propylene rubber (EPR) and a β-nucleating agent (β-NA) were studied simultaneously. In the IPC, iPP and EPR act as the matrix and dispersed phase, respectively. The EPR is amorphous and the iPP is crystallizable in α- and β-crystalline forms in the presence of the β-NA. The orientation and orientation distribution for both of the EPR phase and the iPP crystals, as well as the crystallization behavior of iPP, were investigated by two-dimensional wide-angle X-ray diffraction (2D-WAXD), two-dimensional small-angle X-ray scattering (2D-SAXS), scanning electron microscope (SEM) and differential scanning calorimetry (DSC). The results of the experiment show that orientation exists for both the EPR phase and the iPP crystals. But their orientation distribution manifests an opposite tendency. The EPR phase was observed to be highly oriented in the core layer but the orientation of the iPP crystals was weakened gradually from skin to core. The difference in the orientation behavior between the EPR phase and the iPP crystals reflects the distinct response of the micrometer-scale EPR particles and nanometer-scale iPP chains upon the flow field and temperature gradient in the mold. The diffraction geometry of the β-crystals has also been discussed in detail. The observations in this study may shed light on the study in the structure and property relationship for the IPC injection-molded products.     

A Thin, Composite Sodium Chloride Dosimeter with Diffuse Reflected Light Spectrophotometric Read Out

Optical absorption by electrons trapped in natural anionic vacancies in NaCl has been used for the construction of a dosimeter for radiation processing. To meet the demands of electron beam processing, characterised by congestion of isodoses, the active part of the dosimeter, i.e., the microcrystals of NaCl are embedded in a 0.3 mm thick polyethylene film, in which doses from 10 MeV electrons do not exceed ±2% difference in extreme parts of the dosimeter body. The dosimetric film is opaque and the optical density at the wavelength _max = 465 nm, i.e., the maximum absorption of the F band, is measured by diffuse reflected light spectrophotometry (DRS). The measurement is performed against the unirradiated film as reference, thus increasing the accuracy, by self-compensation of signals not belonging to the absorption of F-centres. The spectrum obtained in such a way is identical with that of F-centres in irradiated single NaCl crystals. The calibration curve of the height of the band is almost linear versus the dose in the range of several tens of kilograys. As ordinary grades of sodium chloride may be used, the dosimeter developed is cheap and enables to map the irradiation field in objects of complicated geometry.     

Ammonium dithionate- a new material for highly sensitive EPR dosimetry

Polycrystalline ammonium dithionate has been examined for its radiation response in the low dose range (<5Gy) using EPR technique. The SO(3)(-) radical ion was detected as a single EPR line with a peak-to-peak derivative width of ca. 0.44mT in irradiated samples and its intensity was found to vary linearly with dose. At equal and moderate settings of microwave power and modulation amplitude ammonium dithionate was at least seven times more sensitive than l-alanine which is the most common EPR dosimeter standard. Pulse experiments were performed on the powder samples to obtain the longitudinal relaxation time. These and microwave saturation experiments served to indicate the optimal microwave power to be applied during measurements as an EPR dosimeter for best sensitivity of this material. It is thus claimed that ammonium dithionate has excellent potential to become an EPR dosimeter with a low limit of the measurable dose for cases where tissue equivalence is not required or can be corrected for.     

Development of nickel-doped lithium formate as potential EPR dosimeter for low dose determination

EPR dosimetry employing L-alpha-alanine has been in vogue during the past few years, due to its tissue equivalence and linear dose response. However, L-alpha-alanine dosimetry has been improved during the past years, the sensitivity of this material is still too low for clinical applications. Polycrystalline lithium formate doped with NiCl2 was therefore examined for radiation response in the dose range of clinical interest (<5 Gy) using CW EPR and pulse EPR techniques. At equal and moderate settings of microwave power and modulation amplitude lithium formate doped with 1.6 wt% of NiCl2 was almost four times more sensitive compared to L-alpha-alanine, which is the most common EPR dosimeter standard. It was shown that the nickel-doped lithium formate has an excellent radiation response with a low limit of the measurable dose, and a linear dose response in the range 1-5 Gy. The relaxation and power saturation studies showed that high microwave power can be applied during measurements to improve the sensitivity of this material as an EPR dosimeter. These results show that lithium formate doped with Ni(II) exhibits promising properties required for further development of an EPR dosimeter in the dose range typical for clinical dosimetry.     

Some Physico-Technical Aspects of the New Generation of Self-Calibrated Alanine/EPR Dosimeter and Results from the International Intercomparison trial

Some physico-technical parameters of the self-calibrated alanine/EPR dosimeters are described. Principally, this new type of solid state/EPR dosimeter contains radiation sensitive diamagnetic material (in the present case, alanine), some quantity of EPR active, but radiation insensitive, substance (for example, Mn²⁺/MgO) playing roles of an internal standard and a binding material. Thus with this dosimeter the EPR spectra of alanine and the internal standard Mn²⁺ are recorded simultaneously and the dose response is represented as a ratio of EPR signal intensities of alanine versus Mn²⁺ as a function of absorbed dose. As a result, the data of the present study have shown that there is practically no interference of the dosimeter EPR response (expressed as the ratio I _alanine/I _Mn) from the way of preparation (homogeneity), behavior after irradiation (fading of EPR signals with time, influence of different meteorological conditions) as well as specific spectrometer setting conditions. These dosimeters show satisfactory reproducibility of preparation and reading as well as stability on keeping. Thus, fulfilling the described physico-technical data of this type of dosimeters, the reproducibility of the readings is significantly improved particularly when intercomparison among different laboratories is performed. This conclusion is confirmed by independent studies of the described self-calibrated alanine/EPR dosimeters in several laboratories in Europe. Results of which are also reported.     

Orientation of the boundary faces in nylon-11 lamellar crystals

A semicrystalline polymer having a large repeat unit, as does nylon-11, is particularly suitable for seeking correlation between the orientation of the lattice and the basal planes of the lamellar crystals. In filter mats of nylon-11 single crystals, the basal planes of the lamellae are parallel to (00l) crystallographic planes; the chain axis is tilted with respect to the mat plane. By planar extrusion, bulk double oriented specimens with a nearly single texture can be prepared: the basal planes of the lamellae are parallel to (00l) planes and the chain axis is along the extrusion direction. Doubly oriented samples of nylon-11 having a double texture have been obtained by unidirectional rolling. In these samples, the chain axes are along the rolling direction; the basal planes of the lamellar crystals are not parallel to (00l) planes. It has been proposed that lamellae consist of blocks of six hydrogen-bonded planes shifted by one monomer unit. The parallelism between basal planes of lamellae and (00l) planes is obtained again in rolled samples annealled in contact with formic acid. Those annealed samples are similar to filter mats with respect to the orientation of the lamellar basal planes but they remain doubly oriented at the level of the unit cell; they have a long spacing larger than filter mats of single crystals.     

Magnetic properties of single crystal alpha-benzoin oxime: An EPR study

The electron paramagnetic resonance (EPR) spectra of gamma irradiated single crystals of alpha-benzoinoxime (ABO) have been examined between 120 and 440 K. Considering the dependence on temperature and the orientation of the spectra of single crystals in the magnetic field, we identified two different radicals formed in irradiated ABO single crystals. To theoretically determine the types of radicals, the most stable structure of ABO was obtained by molecular mechanic and B3LYP/6-31G(d,p) calculations. Four possible radicals were modeled and EPR parameters were calculated for the modeled radicals using the B3LYP method and the TZVP basis set. Calculated values of two modeled radicals were in strong agreement with experimental EPR parameters determined from the spectra. Additional simulated spectra of the modeled radicals, where calculated hyperfine coupling constants were used as starting points for simulations, were well matched with experimental spectra.     

Magnetic orientation of 1,3,5-triphenyl-6-oxoverdazyl radical crystals

The magnetic orientation has been studied for paramagnetic organic radical crystals 1,3,5-triphenyl-6-oxoverdazyl and 1,5-di-p-tolyl-3-phenyl-6-oxoverdazyl in magnetic fields of 2-80 kOe at temperatures of 77-343 K. The X-ray diffraction measurement has revealed that the crystals are oriented with the crystallographic c axis perpendicular to the field. The anisotropic diamagnetic susceptibility arising from the benzene rings has been estimated for the crystals along the principal magnetic chi 1, chi 2, and chi 3 axes. (The chi 1 axis is at a small angle to the a axis in the monoclinic ac plane, and the chi 3 axis is along the b axis.) Since the paramagnetic susceptibility originating from the verdazyl ring is isotropic (though a large absolute value), it is shown that the magnetic orientation occurs by the anisotropy of the diamagnetic susceptibility in the crystals. The diamagnetic susceptibility is found to have a relation of chi 2 < chi 1 < chi 3 < 0.     

Structure and dynamics of the triplet state of oligothiophenes in isotropic and partially oriented matrices

The photoexcited triplet states of 4,4'-dipentoxy-2,2'-dithiophene (4-T2), 3,3'-dipentoxy-2,2'-dithiophene (3-T2), and 4,4'-dipentoxy-2,2':5',2':5',2'-tetrathiophene (4-T4) have been investigated by time-resolved electron paramagnetic resonance in glassy toluene and in a frozen oriented liquid crystal, which provides a partially ordered medium. The preferential orientation of the rod-like 4-T2 and 4-T4 is compared to that of the disk-like 3-T2. The use of an oriented matrix coupled to simple semiempirical calculations allowed us to determine the orientation of the principal axes of the fine interaction with respect to the molecular axes. The motional behavior of the molecules in the isotropic and anisotropic matrices has been studied by comparing the spectral profiles of the Echo detected EPR (Echo-EPR) spectra with those of the continuous wave time resolved EPR (TR-EPR). A model considering the modulation of the zero-field splitting (ZFS) by molecular libration accounts for the Echo-EPR lineshape, on the basis of motions around preferential axes depending on the embedding matrix. The differences in the ZFS parameters of the two isomers 4-T2 and 3-T2 are attributed to a mesomeric effect due to the substituents.     

Full determination of zero field splitting tensor of the excited triplet state of C60 derivatives of arbitrary symmetry from high field TREPR in liquid crystals

The low-lying photoexcited triplet state of a series of fullerene C(60) adducts has been studied by high-field TREPR (time-resolved EPR) spectroscopy in a partially oriented phase. The fullerenes adopt a biaxial alignment, driven by the substituents, that has allowed to fully determine the ZFS and g tensors, i.e., their principal values and the orientation of the principal axes in the molecular skeleton. This has been accomplished by combining line shape analysis and theoretical prediction of molecular order. A strong dependence of the magnetic tensors on the substitution pattern has been found.     

Zero-Birefringence Optical Polymer by Birefringent Crystal and Analysis of the Compensation Mechanism

Summary: We reported a method for compensating the birefringence of optical polymers by doping them with inorganic birefringent crystals. In this method, an inorganic birefringent material is chosen that has the opposite birefringence to the polymer and needle-like shape crystals which are oriented when the polymer chains are oriented. The birefringence of the polymer is thus compensated by the opposing birefringence of the crystal. Orientation behavior of the needle-like crystals and polymers was investigated. The orientation function of the needle-like crystal was increased with an increase in the aspect ratio of the needle-like crystal.     

MFI型沸石晶体的择优定向生长

首次采用"双模板剂"法在SiO2-Na2O-正丙胺-溴化N-乙基-六亚甲基四胺(EtHMTA^+)-NaF-H2O体系中合成得到了b轴择优取向的ZSM-5(MFI型)晶体,并用扫描电镜(SEM)和XRD进行表征。择优取向程度与所用的两种模板剂的比例有关,当正丙胺:EtHMTA^+比为0.7:0.3时,ZSM-5晶体择优取向最明显。     

Highly oriented structure formed in a lamella-forming diblock copolymer with high molar mass

Highly oriented films were prepared simply by annealing a lamella-forming block copolymer, poly(ethylene oxide-b-styrene) (PEO-b-PS), with high molar mass under a pressure of 0.2 MPa. The oriented structures were characterized by small-angle X-ray scattering (SAXS) and wide-angle X-ray diffraction (WAXD). The SAXS measurements showed that the lamellar layers of the block copolymer are highly oriented parallel in the film plane. The WAXD images showed that the c-axis of PEO crystals was oriented normal to the film plane. The Hermans-Stein orientation functions for the lamellar layer and the crystal axis are 0.954 and −0.466, respectively, and are close to the values of perfect orientation. It was considered that the highly oriented structure was formed by the combined effects of shear flow and self-organization of the block copolymer during annealing under stress. The high degree of orientation both for the lamellar layer and crystal planes also suggested that the crystallization in the confined domains results in a high degree of orientation of PEO crystals with respect to the lamellar interface of the block copolymer.     

Polyethylene fiber formation in tubular flow. I. Observations of growth pattern and fiber properties

The process of seeded growth of fibrillar polyethylene crystals has been studied in a tubular flow geometry for 0.01-wt % solutions of a high-molecular-weight polyethylene in xylene. The transformation sequence has been followed visually by using polarized-light illumination in conjunction with a video camera. Data are presented to show that transformation is initiated by the formation of a concentrated, unoriented, amorphous precursor fiber within which oriented birefringent crystals subsequently grow in consequence of the stresses transmitted by the flowing solution. Time constants for the precursor formation, birefringence initiation, and completion of birefringence were measured as functions of temperature and flow rate over a range of growth conditions. Wide-angle x-ray diffraction, overall birefringence, and optical hot-stage melting data were also obtained on the grown fibers. The net result of these observations is to conclude that fibrillar crystal growth during flow is always preceded by the formation of a liquidlike phase transformation which produces the concentrated, unoriented precursor. Subsequent orientation is in consequence of stress-induced crystallization with overall fiber orientation showing an increase with solution flow rate at a fixed temperature and a decrease with temperature at a fixed flow rate. At higher temperatures and lower flow rates, birefringence develops in an oscillatory fashion, indicating a remelting process possibly due to slippage of trapped chain entanglements formed by flow. A discussion is given of the implications of these observations for the understanding of flow-induced structure development, phase transformation, and oriented crystallization; this is expanded upon in a companion paper, Part II.     

One-dimensional ion-conductive polymer films: alignment and fixation of ionic channels formed by self-organization of polymerizable columnar liquid crystals

We have prepared two types of one-dimensional ion-conductive polymer films containing ion nanochannels that are both perpendicular and parallel to the film surface. These films have been obtained by photopolymerization of aligned columnar liquid crystals of a fan-shaped imidazolium salt having acrylate groups at the periphery. In the columnar structure, the ionic part self-assembles into the inner part of the column. The column is oriented macroscopically in two directions by different methods: orientation perpendicular to the modified surfaces of glass and indium tin oxide with 3-(aminopropyl)triethoxysilane and orientation parallel to a glass surface by mechanical shearing. Ionic conductivities have been measured for the films with columnar orientation vertical and parallel to the surface. Anisotropic ionic conductivities are observed for the oriented films fixed by photopolymerization. The ionic conductivities parallel to the columnar axis are higher than those perpendicular to the columnar axis because the lipophilic part functions as an ion-insulating part. The film with the columns oriented vertically to the surface shows an anisotropy of ionic conductivities higher than that of the film with the columns aligned parallel to the surface.     

Solid state "self-calibrated" EPR-dosimeters-advantageous and shortcomings

EPR dosimetry method with alpha-alanine as radiation sensitive material (RSM) is widely used in high dose dosimetry laboratories. However, it is not suitable for routine industrial applications mainly because of difficult EPR measurement procedure. In order to simplify quantitative EPR dosimetry measurements Yordanov and Gancheva developed so-called "self-calibrated" (sc) dosimeters consists of RSM (alpha-alanine, sugar, other ones), Mn2+/MgO as internal EPR intensity standard (IES) and a binder. The aim of this work was to check dosimetric properties of two experimental batches of sc EPR dosimeters with alpha-alanine and sugar as RSM, Mn2+/MgO as IES and paraffin as a binder. The percentage content of the components was 60, 5 and 35% (w/w), respectively. It was established that the investigated alanine sc-dosimeters are about two times more sensitive than the sugar ones. The dose-response coefficient, K(dr) of sc-alanine dosimeters was stable in all investigated dose range from 1 to 23 kGy. The K(dr)-value of sugar sc-dosimeters decreased with the dose what was in a contradiction to the results pointed to the high stability of radiation generated sugar radicals. The observed effect arose probably from the special chemical procedure used for the sc-sugar dosimeters production. The results confirmed an expectation that the position of sc dosimeter in the cavity is not important factor for accurate dose evaluation. It allows to read-out dosimetric signals in shorter time, with lower uncertainty and on less sophisticate EPR-spectrometers than that commonly used till now. The main shortcomings of sc dosimeters are: (a) the limitation of RSM suitable for sc dosimeters to these ones having strictly linear signal to dose characteristic; (b) necessity to assure very good homogeneity of dosimeter material; and (c) the cost of IES present in the amount of some percent in each sc dosimeter.     

三角对称晶场中 4 A2(3d3 )态离子EPR参量的SS和SOO机制

A CDM/ EPR program has been developed using Visual Basic 6. 0. The spin-spin（SS）and spin-otherorbit（SOO）interactions omitted in published works have also been included in the Hamiltonian. The CDM/EPR program can study not only the EPR parameters but also the CF energy levels and wavefunctions for 4A2 （3d3）states ions in crystals. Utilizing the CDM/ EPR program,the EPR parameters and fine spectra for Ruby and Emerald have been investigated. The theoretical results are in good agreement with the experimental findings. The contributions to the EPR parameters and fine spectra arising from SS and SOO interactions have been studied. The investigation shows:① The EPR parameters are mainly induced by SO coupling interaction;② The contribution to the zerofield-splitting（ZFS）arising from SS interaction is appreciable and cannot be omitted,whereas the contributions to the ZFS parameter D arising from SOO interaction are smaller;③ The contribution to the Zeeman g-factors and spectra arising from SS and SOO interactions is slight.     

Selfcalibrated alanine/EPR dosimeters: A new generation of solid state/EPR dosimeters

Alanine/EPR dosimeters are well established as secondary, reference dosimeters for high-energy radiation. However, there are various sources of uncertainty in the evaluation of absorbed dose. This arises primarily from the necessity to calibrate each EPR spectrometer and each batch of dosimeters before their use. In order to overcome this disadvantage, a new generation alanine/EPR dosimeter has been developed, and its possibilities as a radiation detector are reported. Principally, it is a mixture of alanine, some quantity of EPR active substance, and a binding material. The EPR active substance, acting as an internal EPR standard, is chosen to have EPR parameters which are independent of the irradiation dose. The simultaneous recording of the spectra of both the sample and the standard under the same experimental conditions and the estimation of the ratioI _alanine/I _Mn as a function of the absorbed dose strongly reduces the uncertainties. The response of these dosimeters for⁶⁰Co γ-radiation exhibits excellent linearity and reproducibility in the range of absorbed dose, 10²−5·10⁴ Gy.     

1H NMR of probes oriented in stretched polyethylene

¹H NMR spectra of some small molecules oriented in stretched polyethylene rods have been recorded. The band splitting due to direct dipole-dipole couplings is obtained and the corresponding orientation parameters are shown as a function of the draw ratio of the polymer and the temperature. This method is compared to that of using liquid crystals as the orienting solvent.