Pd-catalyzed thiocarbamoylation of terminal alkynes with sulfenamide and carbon monoxide

Regio- and stereoselective thiocarbamoylation of terminal alkynes successfully took place using 2,4,5-tri-Cl-C₆H₂SNEt₂ as a reaction substrate and PdCl₂(PPh₃)₂/PPh₃/n-Bu₄NCl as a catalyst system.     

Formation of a new cubic form of carbon from carbyne

The transformation of carbyne into a new diamond-like form of carbon under normal pressure at a temperature of 360–400 °C was observed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1354–1355, June, 1996.     

Characterization of carbon monoxide photodissociation from Fe(II)LPO with photoacoustic calorimetry

Lactoperoxidase belongs to a family of mammalian peroxidases that catalyze the oxidation of halides and small organic molecules in the presence of H2O2. We have used photoacoustic calorimetry to characterize thermodynamic parameters associated with ligand dissociation from bovine milk lactoperoxidase. Upon CO photorelease, a prompt (tau < 50 ns) exothermic volume contraction (DeltaH = -20 +/- 7 kcal mol-1 and DeltaH = -2 +/- 1 mL mol-1) was measured at pH 7.0 and 4.0, whereas an endothermic expansion (DeltaH = 30 +/- 13 kcal mol-1 and DeltaV = 9 +/- 2 mL mol(-1)) was observed at pH 10.0 and 7.0 in the presence of 500 mM NaCl. We attribute the observed volume and enthalpy changes to electrostriction arising from changes in the charge distribution associated with a reorganization of the heme binding pocket upon ligand dissociation. It is likely that cleavage of the Fe-CO bond is accompanied by distortion of a salt bridge between Arg557 and the heme propionate group, resulting in the observed electrostriction due to changes in charge distribution.     

Electrocatalytic reduction of carbon monoxide with a photocell

It has been shown that CO can be reduced with an electrochemical photocell to methanol in the presence of ethanol and pentachlorochromate(III), bis(oxalato)chromate(III) or iron(III)-tiron complex. The photocell was composed of n-CdS and Everitt's salt-modified platinum electrodes, operating as the photoanode and the cathode, respectively. The current efficiency was 1.0–5.2%, i.e. very low compared with the value (about 100%) obtained in the catalytic system containing methanol instead of ethanol, which was attributed to lower efficiency of the CO uptake by the metal complex-ethanol catalytic system.     

Geminate carbon monoxide rebinding to a c-type haem

A chemically modified form of cytochrome c(cyt. c), termed carboxymethyl cytochrome c(cm cyt. c), possesses a vacant sixth coordination site to the haem iron that is available to bind external ligands. We present data on the rapid flash photolysis of CO from the ferrous haem iron of cm cyt. c and describe the kinetics and spectral transitions that accompany the recombination. This was achieved using 30-femtosecond laser pulses and a white light continuum to monitor spectral transitions. Whereas the photo-dissociation quantum yield is close to 1, the yield of CO escape from the protein (the apparent quantum yield, varphi) relative to myoglobin (varphi=1) is small due to rapid geminate recombination of CO. On ligand photo-dissociation the haem undergoes a spin-state transition from low-spin ferrous CO bound to penta-coordinate high-spin. Subsequently the system reverts to the CO bound form. The data were fitted with a minimum number of exponentials using global analysis. Recombination of CO with the haem iron of cm cyt. c is multiphasic (tau=16 ps, 120 ps and 1 ns), involving three spectrally distinct components. The fraction of haem (0.11) not recombining with CO within 4 ns is similar to the value of varphi(0.12) measured on the same preparation by the "pulse method" (M. Brunori, G. Giacometti, E. Antonini and J. Wyman, Proc. Natl. Acad. Sci. USA, 1973, 70, 3141-3144, ). This implies that no further geminate recombination occurs at t>4 ns. This unusually efficient CO-haem geminate recombination indicates the sterically hindered ("caged") nature of the distal haem pocket in cm cyt. c from which it is difficult for CO to escape. The large geminate phase may be contrasted with the behaviour of myoglobin in which geminate recombination is small. This is in general agreement with the well-documented extensive structural dynamics in myoglobin that allow ligand passage, and a higher structural rigidity in cyt. c imposed by the restraints of minimising reorganisation energy for electron transfer (M. Brunori, D. Bourgeois and D. Vallone, J. Struct. Biol., 2004, 147, 223-234, ). The high pH ferrous form of cm cyt. c is a low-spin species having a lysine bound to the central iron atom of the haem (M. Brunori, M. Wilson and E. Antonini, J. Biol. Chem., 1972, 247, 6076-6081; G. Silkstone, G. Stanway, P. Brzezinski and M. Wilson, Biophys. Chem., 2002, 98, 65-77, ). This high pH (pH approximately 8) form of deoxy cm cyt. c undergoes photo-dissociation of lysine (although the proximal histidine is possible) after photo-excitation. Recombination occurs with a time constant (tau) of approximately 7 ps. This is similar to that observed for the geminate rebinding of the Met80 residue in native ferrous cyt. c(tau approximately 6 ps) following its photo-dissociation (S. Cianetti, M. Negrerie, M. Vos, J.-L. Martin and S. Kruglik, J. Am. Chem. Soc., 2004, 126, 13 932-13 933; W. Wang, X. Ye, A. Demidov, F. Rosca, T. Sjodin, W. Cao, M. Sheeran and P. Champion, J. Phys. Chem., 2000, 104, 10 789-10 801, ).     

The adsorption of carbon monoxide on a platinum electrode

The adsorption of CO from 0.5 M H₂SO₄ solution on platinum has been studied using CO labelled with C-14. The adsorption of CO on Pt occurs in the potential range of hydrogen adsorption as well as in the double layer region. In the whole potential range the rate of adsorption follows first order kinetics. From the surface concentrations and charges for oxidation of adsorbed species it follows that the product of chemisorption consists at least of two kinds of species. One of them is the COOH radical probably formed by the reaction of CO with water.     

Oxidative group transfer to Co(I) affords a terminal Co(III) imido complex

The synthesis of the first terminal imido complex of cobalt, [PhBP3]CoN-p-tolyl, is reported. Its synthesis proceeds by oxidative group transfer from cobalt(I) upon addition of tolyl azide at room temperature. This species and a related eta1-diazoalkane adduct have been structurally characterized. The diamagnetic imido complex [PhBP3]CoN-p-tolyl reacts with CO to liberate isocyanate and the cobalt(I) dicarbonyl complex [PhBP3]Co(CO)2.     

Synthesis and properties of copolymers of ethylene/carbon monoxide with styrene/carbon monoxide

The terpolymerization of ethylene, styrene, and carbon monoxide was accomplished by two different palladium‐based catalysts: a phosphine‐based ligand system and a nitrogen‐based ligand system. The range of possible compositions and the composition dependence of the properties of the resulting polymers were determined. These polymers were essentially carbon monoxide versions of the ethylene styrene interpolymers recently presented by Dow. A comparison between the two families of polymers is attempted. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 752–757, 2000     

Photoinduced carbon monoxide migration in a synthetic heme-copper complex

Time-resolved infrared (TRIR) flash photolytic techniques have been employed to initiate and observe the efficient dissociation of CO from a synthetic heme-CO/copper complex, [((6)L)Fe(II)(CO)..Cu(I)](+) (2), in CH(3)CN and acetone at room temperature. In CH(3)CN, a significant fraction of the photodissociated CO molecules transiently bind to copper (nu(CO)(Cu) = 2091 cm(-)(1)) giving [((6)L)Fe(II)..Cu(I)(CO)](+) (4), with an observed rate constant, k(1) = 1.5 x 10(5) s(-)(1). That is followed by a slower direct transfer of CO from the copper moiety back to the heme (nu(CO)(Fe) = 1975 cm(-)(1)) with k(2) = 1600 s(-)(1). Additional transient absorption (TA) UV-vis spectroscopic experiments have been performed monitoring the CO-transfer reaction by following the Soret band. Eyring analysis of the temperature-dependent data yields DeltaH(double dagger) = 43.9 kJ mol(-)(1) for the 4-to-2 transformation, similar to that for CO dissociation from [Cu(I)(tmpa)(CO)](+) in CH(3)CN (DeltaH(double dagger) = 43.6 kJ mol(-)(1)), suggesting CO dissociation from copper regulates the binding of small molecules to the heme within [((6)L)Fe(II)..Cu(I)](+)(3). Our observations are analagous to those observed for the heme(a3)/Cu(B) active site of cytochrome c oxidase, where photodissociated CO from the heme(a3) site immediately (ps) transfers to Cu(B) followed by millisecond transfer back to the heme.     

The mercury-sensitized oxidation of carbon monoxide

The mercury-photosensitized oxidation of CO was studied at 275°C over a wide range of [O₂]/[CO] ratios in the absence and presence of the oxygen atom scavenger 2-trifluoromethylpropene (TMP) and at 25°C at low [O₂]/[CO] ratios in the presence of TMP. By following the quantum yield of CO₂ production, Φ {CO₂}, as a function of the [O₂]/[CO] ratio, the reactions of vibrationally excited CO (v υ 9) and electronically excited O₂, probably in the c¹Σ^?_u state, were studied. At low [O₂]/[CO] ratios the predominant reactions are of vibrationally excited CO (v υ 9). Relative rate constants for chemical reaction versus deactivation of CO (v υ 9) were obtained. At higher [O₂]/[CO] ratios, the principal reactions are of electronically excited O₂. Relative rate constants for chemical reactions and deactivation of this electronically excited O₂ with CO, O₂, and TMP were obtained. From the effect of total pressure on Φ {CO₂}, it is proposed that an intermediate CO₃ is formed in the reaction of electronically excited O₂ with CO.     

Copolymerization of carbon monoxide and norbornadiene with a palladium catalyst

Carbon monoxide (CO) and norbornadiene (NBD) with Pd(CH₃CN)₄(BF₄)₂ were copolymerized under various conditions at 50°C. Elemental analysis, infrared spectra, UV, Raman, and NMR spectra showed that the copolymers contained both ketone and unsaturated ring structures. Bidentate nitrogen ligands and phosphorus ligands proved to be more effective at stabilizing catalytic activity than monodentate arsenic ligands or phosphorus ligands. Methanol, protic acid, and an oxidant served as the coinitiator and chain transfer agent, respectively. X-ray diffraction analysis showed the copolymer to be partially crystalline. Thermogravimetric analysis showed that the TG curve for the NBD/CO copolymer has two stages with two maxima peaks at 251 and 470°C. This phenomenon was probably due to increased instability of the copolymers as CO content is increased. Hydrogenation of norbornadiene/CO copolymer with LiAlH₄ and Pd/C in THF yields a hydroxyl-containing polymer and norbornene/CO copolymer, respectively. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1157–1166, 1997