Synthesis and self-association of syn-5,10,15-trialkylated truxenes

syn-Trialkylated truxenes have been synthesized by alkylation of the truxene trianion followed by base-catalyzed isomerization of the anti isomers. 1H NMR studies, including a determination of diffusion coefficients, as well as molecular mechanics calculations, demonstrate that these derivatives self-associate in solution through arene-arene interactions. The benzyl derivatives show the strongest associations, which are a result of both benzyl-benzyl and truxene-truxene interactions.     

Linear polybiurets: Facile synthesis and characteristic properties

Linear polybiurets have been synthesized by polyaddition of benzyloxyamine and diisocyanates, and properties of the novel polymeric materials have been elucidated. Prior to polymerization, model reactions between benzyloxyamine and phenyl isocyanate were examined in detail and proved to be controlled by the molar ratio of reagents and by catalysts to give the urea (1:1 adduct) and/or biuret (1:2 adduct). Under appropriate conditions, the biuret was synthesized in a quantitative yield. Polymerization of equimolar amounts of benzyloxyamine and diphenylmethane or hexamethylene diisocyanate proceeded smoothly to give polybiurets with inherent viscosities up to 0.52 dL/g. The benzyl group of the model biuret and polybiuret could be removed by catalytic hydrogenation. Both the N-benzyloxy-type and N-hydroxy-type polybiurets showed excellent solubility in common organic solvents. The two kinds of polybiurets as well as model biurets adsorbed metal cations efficiently. The N-hydroxybiuret structure exhibited particularly high affinity for iron(III) and was useful for selective removal of iron from metal cation mixtures. © 1996 John Wiley & Sons, Inc.     

Synthesis and properties of monodisperse oligofluorene-functionalized truxenes: highly fluorescent star-shaped architectures

This paper describes the strategy toward novel monodisperse, well-defined, star-shaped oligofluorenes with a central truxene core and from monofluorene to quaterfluorene arms. Introduction of solubilizing n-hexyl groups at both fluorene and truxene moieties results in highly soluble, intrinsically two-dimensional nanosized macromolecules T1-T4. The radius for the largest oligomer of ca. 3.9 nm represents one of the largest known star-shaped conjugated systems. Cyclic voltammetry experiments reveal reversible or quasi-reversible oxidation and reduction processes (Eox = +0.74 to 0.80 V, Ered = -2.66 to 2.80 eV vs Fc/Fc+), demonstrating excellent electrochemical stability toward both p- and n-doping, while the band gaps of the oligomers are quite high (EgCV = 3.20-3.40 eV). Close band gaps of 3.05-3.29 eV have been estimated from the electron absorption spectra. These star-shaped macromolecules demonstrate good thermal stability (up to 400-420 degrees C) and improved glass transition temperatures with an increase in length of the oligofluorene arms (from Tg = 63 degrees C for T1 to 116 degrees C for T4) and show very efficient blue photoluminescence (lambdaPL = 398-422 nm) in both solution (PhiPL = 70-86%) and solid state (PhiPL = 43-60%). Spectroelectrochemical experiments reveal that compounds T1-T4 are stable electrochromic systems which change their color reversibly from colorless in the neutral state (approximately 340-400 nm) to colored (from red to purple color; approximately 500-600 nm) in the oxidized state.     

Facile synthesis, structure, and properties of benzo[1,2-b:4,5-b']dichalcogenophenes

[reaction, structures: see text] A general and convenient synthesis of benzo[1,2-b:4,5-b']dichalcogenophenes including the thiophene (BDT, 1), selenophene (BDS, 2), and tellurophene (BDTe, 3) homologues is developed. Thus synthesized heterocycles are structurally characterized by single-crystal X-ray analysis, and all three homologues are isostructural with one another. They all have completely planar molecular structures packed in a herringbone arrangement. Their physicochemical properties were also elucidated by means of cyclic voltammetry (CV) and UV-vis spectra.     

Synthesis and basic properties of tetra-tert-butyltetrabenzo-5,10,15-triazaporphyrin

Russian Journal of General Chemistry - 22,72,122,172-Tetra-tert-butyltetrabenzo-5,10,15-triazaporphyrine was synthesized, and its basic properties were studied by spectrophotometric titration. It...     

Facile synthesis and optical properties of bithiophenesilane monodendrons and dendrimers

Three generations of bithiophenesilane monodendrons and dendrimers consisting of 3-45 2,2'-bithiene-5,5'-diyl units were synthesized by means of effective coupling reactions between the corresponding bithienyllithium derivatives and chlorosilanes. These compounds show efficient photoluminescence in the violet-blue region, the quantum yield of which is 5-15 times higher than that for the parent bithiophene or bithiophenesilanes.     

Facile synthesis and photophysical properties of 1,2-phenylene-bridged porphyrin dimers

Facile synthesis of 1,2-phenylene-bridged porphyrin dimers via Pd-catalyzed cross-coupling reaction and their photophysical properties only moderately perturbed by inter-porphyrin electronic interactions are reported.     

Tannery trimming waste based biodegradable bioplastic: Facile synthesis and characterization of properties

In the present research, the untanned proteinaceous trimming waste from tanneries was used to prepare highly flexible and transparent bioplastic films. Composite bioplastic films were fabricated by blending trimming hydrolysate powder and polyvinyl alcohol using the solution casting method. In addition, a non-toxic and relatively inexpensive bio-crosslinker – citric acid was used as a plasticizer/crosslinking agent. The effects of citric acid concentration on the mechanical properties, thermal stability, transparency and anti-microbial properties of the bioplastic films were investigated. Crosslinking interactions by the citric acid on the constituents of the bioplastic were confirmed using FTIR/ATR. Also, the surface microstructure of the films was studied using SEM. The resultant bioplastic films were smooth, uniform and defect-free. Citric acid used in the bioplastic blend formulation clearly acted as a plasticizer at higher concentrations. The trimming waste-based bioplastic with the citric acid concentration of 40% exhibited an outstanding tensile strength above 20 MPa and extremely high elongation at break value greater than 343%. The bioplastic degraded to an extent of 62% within 70 days under the soil burial test. The transparency of the bioplastics was comparable with the LDPE and PP-like conventional plastics. The anti-microbial properties of the films are the positive aspects brought about by the presence of citric acid interactions. Consequently, trimming based bioplastics may become a future friendly alternative to fossil derived plastics having applicability in packaging, wound healing and other biocompatible applications.     

Facile sonochemical synthesis and photoluminescent properties of lanthanide orthophosphate nanoparticles

Uniform lanthanide orthophosphate LnPO₄ (Ln=La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho) nanoparticles have been systematically synthesized via a facile, fast, efficient ultrasonic irradiation of inorganic salt aqueous solution under ambient conditions without any surfactant or template. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), photoluminescence (PL) spectra as well as kinetic decays were employed to characterize the samples. The SEM and the TEM images show that the hexagonal structured lanthanide orthophosphate LnPO₄ (Ln=La, Ce, Pr, Nd, Sm, Eu, Gd) products have nanorod bundles morphology, while the tetragonal LnPO₄ (Ln=Tb, Dy, Ho) samples prepared under the same experimental conditions are composed of nanoparticles. HRTEM micrographs and SAED results prove that these nanostructures are polycrystalline in nature. The possible formation mechanism for LnPO₄ (Ln=La-Gd) nanorod bundles is proposed. Eu³⁺-doped LaPO₄ and Tb³⁺-doped CePO₄ samples were also prepared by using the same synthetic process, which exhibit an orange-red (Eu³⁺:⁵D₀-⁷F_{1, 2, 3, 4}) and green (Tb³⁺, ⁵D₄-⁷F_{3, 4, 5, 6}) emission, respectively.     

Facile synthesis and photocatalytic properties of AgAgClTiO2/rectorite composite

In this study, we prepared a new visible light induced plasmonic photocatalyst AgAgClTiO(2)/rectorite using a facile deposition-photoreduction method. The catalysts were characterized using X-ray diffraction (XRD), UV-visible diffused reflectance spectra (UV-vis DRS), Raman spectra, high-resolution transmission electron microscopy (HRTEM), and X-ray photoelectron spectroscopy (XPS). The as-prepared AgAgClTiO(2)/rectorite powders exhibited an efficient photocatalytic activity for the degradation of acid orange (ARG) and 4-nitrophenol (4-NP) under visible light irradiation (λ>400 nm). Moreover, the mechanism suggested that the high photocatalytic activity is due to the charge separation and the surface plasmon resonance of metallic Ag particles in the region of visible light. The active species measurements suggested that HO() is not the dominant photooxidant. Direct hole transfers and O(2)(-) were involved as the active species in the photocatalytic reaction.     

Facile synthesis and up-conversion properties of monodisperse rare earth fluoride nanocrystals

Monodisperse rare earth (RE) fluoride colloidal nanocrystals (NCs) including REF(3) (RE = La, Pr, Nd), NaREF(4) (RE = Sm-Ho, Y) and Na(5)RE(9)F(32) (RE = Er, Yb, Lu) have been successfully synthesized by a facile one-step method using oleic acid as surfactant and 1-octadecene as solvent. The phase, morphology, size, and photoluminescence properties of as-synthesized NCs were well investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM), Fourier transform infrared spectroscopy (FT-IR), and photoluminescence (PL) spectra. The results reveal that the as-synthesized NCs consist of monodisperse colloidal NCs with narrow size distribution, which can easily disperse in non-polar cyclohexane solvent. The as-prepared NCs exhibit a rich variety of morphologies and different crystal phases (hexagonal or cubic), which may be related to the inherent natures of different rare earth ions. The possible formation mechanism of NCs with diverse architectures has been presented. In addition, representative Yb/Er, Yb/Tm, or Yb/Ho co-doped NaGdF(4) and Na(5)Lu(9)F(32) NCs exhibit intensive multicolor up-conversion (UC) luminescence under a single 980 nm NIR excitation, displaying potential applications in bioimaging and therapy. Moreover, transparent and UC fluorescent NCs-polydimethylsiloxane (PDMS) composites with regular dimensions were also prepared by an in situ polymerization route.     

Facile synthesis, structure, and luminescence properties of Pt(diimine)bis(arylacetylide) chromophore-donor dyads

The luminescent complex Pt(dpphen)bis(arylacetylide) complex (1) (dpphen = 4,7-diphenylphenanthroline and arylacetylide = 4-ethynylbenzaldehyde) has been synthesized and characterized structurally and spectroscopically. Complex 1 has been employed in the synthesis of donor-chromophore (D-C) dyads through Schiff base condensations of different anilines to give imine-linked dyads 2-4 and through imine reduction with borohydride, to give the corresponding amine-linked dyads 2a-4a. Crystal structure determinations of 1-4 and 4a establish a distorted square-planar geometry around the Pt(II) ion in each system with cis arylacetylide ligands and a diimine-constrained N-Pt-N bond angle of ca. 79.5 degrees. Complex 1 is strongly emissive having a relative quantum yield (phi) of 36% and an excited-state lifetime of 3.1 micros. In accord with the notion of photoinduced electron transfer from the aniline-based donor to the photoexcited chromophore, the emission of dyads 2-4 and 2a-4a is effectively quenched in all solvents tested. The intense absorption at 400 nm (30000-70000 L/mol.cm) for 2 and 2a has been assigned as an intraligand pi-pi* transition, whereas the lowest-energy transitions for all other dyads correspond to Pt-to-pi(diimine) MLCT transitions. Although the dyads can be synthesized in a facile manner, photolysis experiments reveal that both the imine and amine linkages are photochemically unstable, resulting in hydrolysis and regeneration of the aldehyde-containing chromophore 1.     

Multiethynyl corannulenes: synthesis, structure, and properties

Syntheses, crystal structures, ab initio density functional theory computations, and photophysical properties of 1,6-di-, 1,2,5,6-tetra-, and 1,3,5,7,9-pentaethynyl-substituted corannulenes (classes 3, 4, and 5, respectively) are reported. Classes 3 and 4 were prepared from the corresponding corannulenyl bromides and terminal alkynes in excellent yields (nine examples, with yields of 57-92%) using the Sonogarshira reaction. Class 5 was prepared from 1,3,5,7,9-pentacholorocorannulene and trimethylalkynylstannanes using a modification of Nolan's procedure (8 examples, with yields of 45-93%). The molecular packing in crystals of 1,6-diphenylethynyl-2,5-dimethylcorannulene (3-Ph2) displays a polar columnar structure with all of the molecule bowls oriented in the same direction. Similarly, 1,2,5,6-tetrakis(3,5-dimethylphenylethynyl)corannulene [4-Ar(c)5] and 1,3,5,7,9-pentakis(3,5-dimethylphenylethynyl)corannulene [5-Ar(c)5] form columnar structures, but the bowls are oriented in opposing directions. Additionally, the number of attached alkynyl arms is correlated with an increase in bowl depth of the corrannulene nucleus. Most of the aryl derivatives displayed high-quantum-efficiency solution luminescence and variable emission wavelengths that were dependent on the nature of the substitution.     

Facile synthesis,crystal structure and antifungal activity of dimethylated trifluoroatrolactamide derivatives

Research on Chemical Intermediates - A series of novel substituted 3,3,3-trifluoro-2-methoxy-N-methyl-N,2-diphenylpropanamides were synthesized from α-hydroxyacetamide using CH3I as the...     

7-Pyridylindoles: synthesis, structure, and properties

A series of three isomeric 7-pyridylindoles (7-PIs) are prepared where the pyridine attachment is through C2, C3, or C4. These systems are prepared by a combination of the Bartoli reaction and the Stille coupling with an appropriate pyridyl stannane. By treatment with CH(3)I, the 7-PIs can be converted to their pyridinium salts. Deprotonation at the NH of these salts leads to a zwitterion which, in the 4-pyridyl system, also exists as a neutral isomer. The photophysical and NMR properties of these systems are discussed. All three pyridylindoles are analyzed by X-ray crystallography and shown to exist in different states of aggregation dictated by the formation of intra- and intermolecular H-bonds.     

Facile in situ synthesis of nickel/cellulose nanocomposites: mechanisms,properties and perspectives

Nickel/cellulose nanocomposites with tunable magnetic behavior and electrical conductivity were fabricated by a facile in situ synthesis route with aqueous NaOH/urea solution as the solvent to dissolve and regenerate cellulose. It was found that Ni particles are uniformly dispersed in and immobilized by cellulose matrix, which indicates that regenerated cellulose fibers with coarse surface might act as templates to modulate the growth of Ni nanoparticles. Moreover, the size and morphology of Ni nanoparticles as well as the magnetic and conductive properties of Ni/cellulose nanocomposites is dependent on the concentration of Ni²⁺ in NaOH/urea aqueous solution. With an increase in the concentration of Ni²⁺ from 0.2 to 1.0 mol/L, the values of saturation magnetization increased from 16.6 to 38.5 emu/g, while the resistance decreased from 10⁶ to 10^?2 Ω cm. Particularly, multi-layer sample exhibits good absorption capacity and an additional effective bandwidth in the low-frequency region, showing promising potential as candidate electromagnetic functional fabric and cloth.     

Facile thermolysis synthesis of CuInS2 nanocrystals with tunable anisotropic shape and structure

Monodisperse CuInS(2) nanocrystals are produced by injecting mixed metal-oleate precursors into hot organic solvents containing the dissolved sulphur sources. A better understanding of the formation mechanism of CuInS(2) has enabled us to tailor anisotropic shapes in the form of triangular-pyramid, circular cone, and bullet-like rods with tunable crystal phases by varying the synthetic conditions.     

Cationic poly(ester‐phosphoester)s: Facile synthesis and antibacterial properties

Biodegradable poly(ester‐phosphoester)s bearing multiple chloroethyl groups were synthesized facilely by the ring‐opening copolymerization of 2‐(2‐chloroethoxy)‐2‐oxo‐1,3,2‐dioxaphospholane (CEP) and ε‐caprolactone (CL) in the presence of lanthanum tris(2,6‐di‐tert‐butyl‐4‐methylphenolate)s (La(DBMP)₃) as single‐component catalyst under mild conditions. Then the quaternization reaction was carried out between the halide copolymers and a series of N,N‐dimethyl alkylamines to give poly(ester‐phosphoester)s containing ammonium groups with various charge density and alkyl chain length. The antibacterial properties of these cationic poly(esterphosphoester)s were evaluated by OD600 and zone of inhibition methods against gram‐negative (Escherichia coli) and gram‐positive (Staphylococcus aureus) bacteria. Cationic poly(esterphosphoester)s with long alkyl chain on the ammonium groups show excellent antibacterial activity for both gram‐negative and gram‐positive bacteria even with low charge density. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3667–3673     

Facile synthesis of troilite

Low-temperature synthetic pathways can result in crystallization of metastable materials. These methods have been widely explored for the preparation of metal oxides. Adaptation of nonhydrolytic sol-gel chemistry to non-oxide systems offers an elegant route to transition-metal sulfides. The method can be exploited for the facile and reproducible synthesis of iron sulfide crystallizing in the troilite structure. This phase is only found in meteorites and planets and has previously been obtained by high-temperature or high-energy ball-milling methods. "Nonhydrolytic" sol-gel processing results in direct crystallization of troilite with no need for further calcination.     

Facile synthesis of gamma-alkylidenebutenolides

In this paper, a novel route to gamma-alkylidenebutenolides (gamma-AIBs) by way of stereoselective vinylogous aldol reaction of the unactivated butenolide in simple and general conditions is reported.