Benchmark database of accurate (MP2 and CCSD(T) complete basis set limit) interaction energies of small model complexes, DNA base pairs, and amino acid pairs

MP2 and CCSD(T) complete basis set (CBS) limit interaction energies and geometries for more than 100 DNA base pairs, amino acid pairs and model complexes are for the first time presented together. Extrapolation to the CBS limit is done by using two-point extrapolation methods and different basis sets (aug-cc-pVDZ - aug-cc-pVTZ, aug-cc-pVTZ - aug-cc-pVQZ, cc-pVTZ - cc-pVQZ) are utilized. The CCSD(T) correction term, determined as a difference between CCSD(T) and MP2 interaction energies, is evaluated with smaller basis sets (6-31G** and cc-pVDZ). Two sets of complex geometries were used, optimized or experimental ones. The JSCH-2005 benchmark set, which is now available to the chemical community, can be used for testing lower-level computational methods. For the first screening the smaller training set (S22) containing 22 model complexes can be recommended. In this case larger basis sets were used for extrapolation to the CBS limit and also CCSD(T) and counterpoise-corrected MP2 optimized geometries were sometimes adopted.     

Stabilisation energy of C(6)H(6)...C(6)X(6) (X = F, Cl, Br, I, CN) complexes: complete basis set limit calculations at MP2 and CCSD(T) levels

Stabilisation energies of stacked structures of C(6)H(6)...C(6)X(6) (X = F, Cl, Br, CN) complexes were determined at the CCSD(T) complete basis set (CBS) limit level. These energies were constructed from MP2/CBS stabilisation energies and a CCSD(T) correction term determined with a medium basis set (6-31G**). The former energies were extrapolated using the two-point formula of Helgaker et al. from aug-cc-pVDZ and aug-cc-pVTZ Hartree-Fock energies and MP2 correlation energies. The CCSD(T) correction term is systematically repulsive. The final CCSD(T)/CBS stabilisation energies are large, considerably larger than previously calculated and increase in the series as follows: hexafluorobenzene (6.3 kcal mol(-1)), hexachlorobenzene (8.8 kcal mol(-1)), hexabromobenzene (8.1 kcal mol(-1)) and hexacyanobenzene (11.0 kcal mol(-1)). MP2/SDD** relativistic calculations performed for all complexes mentioned and also for benzene[dot dot dot]hexaiodobenzene have clearly shown that due to relativistic effects the stabilisation energy of the hexaiodobenzene complex is lower than that of hexabromobenzene complex. The decomposition of the total interaction energy to physically defined energy components was made by using the symmetry adapted perturbation treatment (SAPT). The main stabilisation contribution for all complexes investigated is due to London dispersion energy, with the induction term being smaller. Electrostatic and induction terms which are attractive are compensated by their exchange counterparts. The stacked motif in the complexes studied is very stable and might thus be valuable as a supramolecular synthon.     

Ab initio calculations on halogen-bonded complexes and comparison with density functional methods

A systematic theoretical investigation on a series of dimeric complexes formed between some halocarbon molecules and electron donors has been carried out by employing both ab initio and density functional methods. Full geometry optimizations are performed at the Moller-Plesset second-order perturbation (MP2) level of theory with the Dunning's correlation-consistent basis set, aug-cc-pVDZ. Binding energies are extrapolated to the complete basis set (CBS) limit by means of two most commonly used extrapolation methods and the aug-cc-pVXZ (X = D, T, Q) basis sets series. The coupled cluster with single, double, and noniterative triple excitations [CCSD(T)] correction term, determined as a difference between CCSD(T) and MP2 binding energies, is estimated with the aug-cc-pVDZ basis set. In general, the inclusion of higher-order electron correlation effects leads to a repulsive correction with respect to those predicted at the MP2 level. The calculations described herein have shown that the CCSD(T) CBS limits yield binding energies with a range of -0.89 to -4.38 kcal/mol for the halogen-bonded complexes under study. The performance of several density functional theory (DFT) methods has been evaluated comparing the results with those obtained from MP2 and CCSD(T). It is shown that PBEKCIS, B97-1, and MPWLYP functionals provide accuracies close to the computationally very expensive ab initio methods.     

Theoretical study of the pyrolysis of methyltrichlorosilane in the gas phase. 2. Reaction paths and transition states

The kinetics for the previously proposed 114-reaction mechanism for the chemical vapor deposition (CVD) process that leads from methyltrichlorosilane (MTS) to silicon carbide (SiC) are examined. Among the 114 reactions, 41 are predicted to proceed with no intervening barrier. For the remaining 73 reactions, transition states and their corresponding barrier heights have been explored using second-order perturbation theory (MP2) with the aug-cc-pVDZ basis set. Final energies for the reaction barriers were obtained using both MP2 with the aug-cc-pVTZ basis set and coupled cluster theory (CCSD(T)) with the aug-cc-pVDZ basis set. CCSD(T)/aug-cc-pVTZ energies were estimated by assuming additivity of basis set and correlation effects. Partition functions for the computation of thermodynamic properties of the transition states were calculated with MP2/aug-cc-pVDZ. Forward and reverse Gibbs free energy barriers were obtained at 11 temperatures ranging from 0 to 2000 K. Important reaction pathways are illustrated at 0 and 1400 K.     

Aliphatic C-H/pi interactions: Methane-benzene, methane-phenol, and methane-indole complexes

Noncovalent C-H/pi interactions are prevalent in biochemistry and are important in molecular recognition. In this work, we present potential energy curves for methane-benzene, methane-phenol, and methane-indole complexes as prototypes for interactions between C-H bonds and the aromatic components of phenylalanine, tyrosine, and tryptophan. Second-order perturbation theory (MP2) is used in conjunction with the aug-cc-pVDZ and aug-cc-pVTZ basis sets to determine the counterpoise-corrected interaction energy for selected complex configurations. Using corrections for higher-order electron correlation determined with coupled-cluster theory through perturbative triples [CCSD(T)] in the aug-cc-pVDZ basis set, we estimate, through an additive approximation, results at the very accurate CCSD(T)/aug-cc-pVTZ level of theory. Symmetry-adapted perturbation theory (SAPT) is employed to determine the physically significant components of the total interaction energy for each complex.     

Approximations to complete basis set-extrapolated, highly correlated non-covalent interaction energies

The first-principles calculation of non-covalent (particularly dispersion) interactions between molecules is a considerable challenge. In this work we studied the binding energies for ten small non-covalently bonded dimers with several combinations of correlation methods (MP2, coupled-cluster single double, coupled-cluster single double (triple) (CCSD(T))), correlation-consistent basis sets (aug-cc-pVXZ, X = D, T, Q), two-point complete basis set energy extrapolations, and counterpoise corrections. For this work, complete basis set results were estimated from averaged counterpoise and non-counterpoise-corrected CCSD(T) binding energies obtained from extrapolations with aug-cc-pVQZ and aug-cc-pVTZ basis sets. It is demonstrated that, in almost all cases, binding energies converge more rapidly to the basis set limit by averaging the counterpoise and non-counterpoise corrected values than by using either counterpoise or non-counterpoise methods alone. Examination of the effect of basis set size and electron correlation shows that the triples contribution to the CCSD(T) binding energies is fairly constant with the basis set size, with a slight underestimation with CCSD(T)∕aug-cc-pVDZ compared to the value at the (estimated) complete basis set limit, and that contributions to the binding energies obtained by MP2 generally overestimate the analogous CCSD(T) contributions. Taking these factors together, we conclude that the binding energies for non-covalently bonded systems can be accurately determined using a composite method that combines CCSD(T)∕aug-cc-pVDZ with energy corrections obtained using basis set extrapolated MP2 (utilizing aug-cc-pVQZ and aug-cc-pVTZ basis sets), if all of the components are obtained by averaging the counterpoise and non-counterpoise energies. With such an approach, binding energies for the set of ten dimers are predicted with a mean absolute deviation of 0.02 kcal/mol, a maximum absolute deviation of 0.05 kcal/mol, and a mean percent absolute deviation of only 1.7%, relative to the (estimated) complete basis set CCSD(T) results. Use of this composite approach to an additional set of eight dimers gave binding energies to within 1% of previously published high-level data. It is also shown that binding within parallel and parallel-crossed conformations of naphthalene dimer is predicted by the composite approach to be 9% greater than that previously reported in the literature. The ability of some recently developed dispersion-corrected density-functional theory methods to predict the binding energies of the set of ten small dimers was also examined.     

The HOX⋯SO2 (X=F,Cl, Br,I) Binary Complexes: Implications for Atmospheric Chemistry

Sulfur dioxide and hypohalous acids (HOX, X=F, Cl, Br, I) are ubiquitous molecules in the atmosphere that are central to important processes like seasonal ozone depletion, acid rain, and cloud nucleation. We present the first theoretical examination of the HOX⋯SO₂ binary complexes and the associated trends due to halogen substitution. Reliable geometries were optimized at the CCSD(T)/aug-cc-pV(T+d)Z level of theory for HOF and HOCl complexes. The HOBr and HOI complexes were optimized at the CCSD(T)/aug-cc-pV(D+d)Z level of theory with the exception of the Br and I atoms which were modeled with an aug-cc-pwCVDZ-PP pseudopotential. 27 HOX⋯SO₂ complexes were characterized and the focal point method was employed to produce CCSDT(Q)/CBS interaction energies. Natural Bond Orbital analysis and Symmetry Adapted Perturbation Theory were used to classify the nature of each principle interaction. The interaction energies of all HOX⋯SO₂ complexes in this study ranged from 1.35 to 3.81 kcal mol⁻¹. The single-interaction hydrogen bonded complexes spanned a range of 2.62 to 3.07 kcal mol⁻¹, while the single-interaction halogen bonded complexes were far more sensitive to halogen substitution ranging from 1.35 to 3.06 kcal mol⁻¹, indicating that the two types of interactions are extremely competitive for heavier halogens. Our results provide insight into the interactions between HOX and SO₂ which may guide further research of related systems.     

Hydrogen-bonded nucleic acid base pairs containing unusual base tautomers: complete basis set calculations at the MP2 and CCSD(T) levels

The total interaction energies of altogether 15 hydrogen-bonded nucleic acid base pairs containing unusual base tautomers were calculated. The geometry properties of all selected adenine-thymine and guanine-cytosine hydrogen-bonded base pairs enable their incorporation into DNA. Unusual base pairing patterns were compared with Watson-Crick H-bonded structures of the adenine-thymine and guanine-cytosine pairs. The complete basis set (CBS) limit of the MP2 interaction energy and the CCSD(T) correction term, determined as the difference between the CCSD(T) and MP2 interaction energies, was evaluated. Extrapolation to the MP2 CBS limit was done using the aug-cc-pVDZ and aug-cc-pVTZ results, and the CCSD(T) correction term was determined with the 6-31G*(0.25) basis set. Final interaction energies were corrected while taking into account both tautomeric penalization determined at the CBS level and solvation/desolvation free energies. The situation for the adenine-thymine pairs is straightforward, and tautomeric pairs are significantly less stable than the Watson-Crick pair consisting of the canonical forms. In the case of the guanine-cytosine pair, the Watson-Crick structure made by canonical forms is again the most stable. The other two structures are, however, energetically rather similar (by 5 and 6 kcal/mol), which provides a very small but non-negligible chance of detecting these structures in the DNA double helix (1:5000). Due to the fact that DNA bases and base pairs incorporated into DNA are solvated less favorably than in isolated systems, this probability represents the very upper limit. The results clearly show how precisely the canonical building blocks of DNA molecules were chosen and how well their stability is maintained.     

The effect of basis set superposition error on the convergence of intermolecular interaction energies for deprotonated complexes

The intermolecular interaction energies of the deprotonated hydrogen-bonded complexes F(-)(HF), F(-)(H(2)O), F(-)(NH(3)), Cl(-)(HF), SH(-)(HF), H(2)P(-)(HF), OH(-)(H(2)O), OH(-)(H(2)O)(2), OH(-)(NH(3)), Cl(-)(H(2)O), SH(-)(H(2)O), H(2)P(-)(H(2)O), Cl(-)(NH(3)), SH(-)(NH(3)), H(2)P(-)(NH(3)), Cl(-)(HCl), Cl(-)(H(2)S), Cl(-)(PH(3)), SH(-)(H(2)S), SH(-)(PH(3)), and H(2)P(-)(PH(3)) were calculated with correlation consistent basis sets at the MP2, MP4, QCISD(T), and CCSD(T) levels. When the basis set is smaller, the counterpoise-uncorrected intermolecular interaction energies are closer to the complete basis set limit than the counterpoise-corrected intermolecular interaction energies. The counterpoise-uncorrected intermolecular interaction energies obtained at the MP2/aug-cc-pVDZ level of theory are close to the interaction energies obtained at the extrapolated complete basis set limit in most of the complexes. Also, we investigate the accuracy of the other levels.     

Ab initio study of substituent effects in the interactions of dimethyl ether with aromatic rings

Ab initio calculations have been used to investigate the interaction energies of dimers of dimethyl ether with benzene, hexafluorobenzene, and several monosubstituted benzenes. The potential energy curves were explored at the MP2/aug-cc-pVDZ level for two basic configurations of the dimers, one in which the oxygen atom of the dimethyl ether was pointed towards the aromatic ring and the other in which the oxygen atom was pointed away from the aromatic ring. Once the optimum intermolecular distances between the dimethyl and the aromatic ring had been determined for each of the dimers in both configurations at the MP2/aug-cc-pVDZ level, single point energy calculations were performed at the MP2/aug-cc-pVTZ level. A CCSD(T) correction term to the energy was determined and this was combined with the MP2/aug-cc-pVTZ energies to estimate the CCSD(T)/aug-cc-pVTZ interaction energies of the dimers. The estimated CCSD(T)/aug-cc-pVTZ interaction energies are predicted to be attractive for all of the dimers in both configurations and dispersion interactions are found to be a large component of the stabilization of the dimers. For the dimers with the dimethyl ether oxygen pointing towards the aromatic ring, the strengths of interaction energies are found to increase as the aromatic ring becomes more electron deficient, while for the dimers with the dimethyl ether oxygen pointing away from the aromatic ring, they increase as the aromatic ring becomes more electron rich. In both cases, the trends can be explained in terms of the electrostatic potentials of the dimethyl ether and the aromatic rings.     

Computational study of noncovalent complexes between formamide and formic acid

The geometries and binding energies of 1:1, 1:2, and 1:4 formic acid-formamide complexes (FA-FMA) are calculated by quantum chemical procedures. Vibrational spectra and intermolecular distances of the most stable FA-FMA dimers as well as the influence of the basis set superposition error (BSSE) on the geometries and energies of the dimers are also discussed. All FA-FMA dimers are optimized at the B3LYP/cc-pVTZ, the MP2/cc-pVDZ, aug-cc-pVDZ, cc-pVTZ, and aug-cc-pVTZ levels of theory to study the influence of the level of theory on the calculated geometries and energies. CCSD(T)/cc-pVTZ single-point calculations at the MP2/aug-cc-pVTZ-optimized geometries were performed as reference for estimating the quality of lower level calculations. These calculations allow us to qualitatively describe the competition between different types of hydrogen-bonding interactions in FA-FMA complexes. FA-FMA dimers are compared to other formamide complexes and to the FA-FMA crystal structure.     

Theoretical reference values for the AE6 and BH6 test sets from explicitly correlated coupled-cluster theory

We propose a new computational protocol to obtain highly accurate theoretical reference data. This protocol employs the explicitly correlated coupled-cluster method with iterative single and double excitations as well as perturbative triple excitations, CCSD(T)(F12), using quadruple-z\zeta basis sets. Higher excitations are accounted for by conventional CCSDT(Q) calculations using double-z\zeta basis sets, while core/core-valence correlation effects are estimated by conventional CCSD(T) calculations using quadruple-z\zeta basis sets. Finally, scalar-relativistic effects are accounted for by conventional CCSD(T) calculations using triple-z\zeta basis sets. In the present article, this protocol is applied to the popular test sets AE6 and BH6. An error analysis shows that the new reference values obtained by our computational protocol have an uncertainty of less than 1 kcal/mol (chemical accuracy). Furthermore, concerning the atomization energies, a cancellation of the basis set incompleteness error in the CCSD(T)(F12) perturbative triples contribution with the corresponding error in the contribution from higher excitations is observed. This error cancellation is diminished by the CCSD(T*)(F12) method. Thus, we recommend the use of the CCSD(T*)(F12) method only for small- and medium-sized basis sets, while the CCSD(T)(F12) approach is preferred for high-accuracy calculations in large basis sets.     

Intermolecular interactions in nitrogen-containing aromatic systems

π–π and CH···N interactions are vital in biological systems. In this study, stacking and hydrogen-bonded interactions in pyrazine and triazine dimers were investigated by density functional theory combined with symmetry-adapted perturbation theory (DFT-SAPT) and counterpoise (CP)-corrected supermolecular MP2, SCS-MP2, B3LYP-D and CCSD(T) calculations. All interaction energies were computed using the optimized structures at the CP-corrected SCS/aug-cc-pVDZ level, which gave 1–2 kJ/mol lower interaction energies than the ones computed at the MP2 level. For both dimers, doubly hydrogen-bonded and cross-(displaced) stacked orientations were found to be the lowest energy ones. The reference CCSD(T) calculations favored the former structure in both dimer systems, whereas MP2 and SCS-MP2 located the latter as the lowest energy isomer. In particular, the former was found to be lower in energy than the latter by 2.28 and 1.01 kJ/mol at the CCSD(T)/aug-cc-pVDZ level for pyrazine and triazine, respectively. B3LYP-D produced interaction energies in agreement with the CCSD(T) at the equilibrium geometries, but it overestimates them at the short range and underestimates at the long intermonomer separations. Furthermore, it tends to give smaller equilibrium distances compared to the CCSD(T). DFT-SAPT method was in a good agreement with the reference CCSD(T) calculations. This suggests that DFT-SAPT can be employed to compute the full potential energy surface of these dimers. Moreover, DFT-SAPT calculations showed that the electrostatic and dispersion contributions are the most important energy components stabilizing these dimers. The present study aims to show which theoretical method is the most promising one for the investigation of intermolecular interactions dominated by π–π and CH···N. Therefore, the findings obtained in this study can be used to unravel the structures of nucleic acid bases and other systems stabilized by π–π and CH···N interactions.     

Ab initio MO study on the global minimum structure of C3H3 anion: propynl-1-yl versus allenyl anions

The geometrical structures of the C₃H⁻₃ anion are surveyed at the coupled-cluster doubles (CCD) level of theory with the aug-cc-pVDZ basis set. To clarify the CCD geometries, the stable two isomers -- propynl-l-yl 1 and allenyl 2 anions -- are further optimized at the coupled-cluster singles, doubles (triples) (CCSD(T)) level of theory both with the aug-cc-pVDZ and aug-cc-pVTZ basis sets. The final energies are calculated at the CCSD(T) and the complete active space self-consistent field (CASSCF) multi-reference internally contracted CI (MRCI) levels of theory with the aug-cc-pVTZ basis set. At the MRCI level of theory including both the corrections due to the cluster energies (MRCI+Q) and the zero-point vibrational energies, the allenyl anion 2 is about 1.3 kcal mol⁻¹ lower in energy than the propynl-l-yl anion 1. These results contrast with the previous theoretical estimates, where the propynl-l-yl anion 1 is 2-3 kcal mol⁻¹ lower in energy than the allenyl anion 2. The activation energies of the intramolecular hydrogen transfer in the 1 → 2 conversion reactions are 63.5 kcal mol⁻¹ at the MRCI+Q level of theory with the aug-cc-pVTZ basis set including the zero-point energy corrections. The adiabatic electron affinity of the planer propargyl (H₂CCCH) radical, which is the global minimum of the C₃H₃ radical, is calculated to be 0.976 eV (after correction for the zero-point energy changes) at the CCSD(T) level of theory with the aug-cc-pVTZ basis set. The present electron affinity is in fairly good agreement with the experimental one (0.893 eV) observed by Oakes and Ellison.     

Ab initio study of chiral recognition in the propylene imine.hydrogen peroxide complex

High level ab initio calculations were employed to study the chiral recognition effect in several chiral molecular pairs that consist of the propylene imine and hydrogen peroxide molecules. The potential energy surfaces for the complexes formed between S-cis-1,2-propylene imine and the two enantiomeric forms of hydrogen peroxide were constructed, using the calculated interaction energies at different separations and orientations. The energy calculations were done using the MOLPRO suite of programs with CCSD(T)/cc-pVDZ. The energies were counterpoise corrected at every point to eliminate the basis set superposition error. Complete geometry optimizations were further carried out for the molecular complexes consisting of the cis- or trans-propylene imine isomers and the two enantiomeric forms of hydrogen peroxide. The geometry optimizations were done using the Gaussian 98 and 03 suites of programs, with MP2/aug-cc-pVDZ being the highest level used. Altogether, eight stable complexes were identified, and the corresponding dissociation energies were calculated with MP2/aug-cc-pVTZ. The largest chirodiastaltic energy is found at 0.74 kcal mol(-1) for the (syn)trans-propylene imine.hydrogen peroxide complexes, where hydrogen peroxide acts as a hydrogen donor and is on the opposite side of the ring from the methyl group. The rotational constants, dipole moments, and harmonic frequencies of the complexes are presented to assist future spectroscopic investigations.     

Interaction energies for the purine inhibitor roscovitine with cyclin-dependent kinase 2: correlated ab initio quantum-chemical, DFT and empirical calculations

The interaction between roscovitine and cyclin-dependent kinase 2 (cdk2) was investigated by performing correlated ab initio quantum-chemical calculations. The whole protein was fragmented into smaller systems consisting of one or a few amino acids, and the interaction energies of these fragments with roscovitine were determined by using the MP2 method with the extended aug-cc-pVDZ basis set. For selected complexes, the complete basis set limit MP2 interaction energies, as well as the coupled-cluster corrections with inclusion of single, double and noninteractive triples contributions [CCSD(T)], were also evaluated. The energies of interaction between roscovitine and small fragments and between roscovitine and substantial sections of protein (722 atoms) were also computed by using density-functional tight-binding methods covering dispersion energy (DFTB-D) and the Cornell empirical potential. Total stabilisation energy originates predominantly from dispersion energy and methods that do not account for the dispersion energy cannot, therefore, be recommended for the study of protein-inhibitor interactions. The Cornell empirical potential describes reasonably well the interaction between roscovitine and protein; therefore, this method can be applied in future thermodynamic calculations. A limited number of amino acid residues contribute significantly to the binding of roscovitine and cdk2, whereas a rather large number of amino acids make a negligible contribution.     

Toward a less costly but accurate calculation of the CCSD(T)/CBS noncovalent interaction energy

The popular method of calculating the noncovalent interaction energies at the coupled-cluster single-, double-, and perturbative triple-excitations [CCSD(T)] theory level in the complete basis set (CBS) limit was to add a CCSD(T) correction term to the CBS second-order Møller-Plesset perturbation theory (MP2). The CCSD(T) correction term is the difference between the CCSD(T) and MP2 interaction energies evaluated in a medium basis set. However, the CCSD(T) calculations with the medium basis sets are still very expensive for systems with more than 30 atoms. Comparatively, the domain-based local pair natural orbital coupled-cluster method [DLPNO-CCSD(T)] can be applied to large systems with over 1,000 atoms. Considering both the computational accuracy and efficiency, in this work, we propose a new scheme to calculate the CCSD(T)/CBS interaction energies. In this scheme, the MP2/CBS term keeps intact and the CCSD(T) correction term is replaced by a DLPNO-CCSD(T) correction term which is the difference between the DLPNO-CCSD(T) and DLPNO-MP2 interaction energies evaluated in a medium basis set. The interaction energies of the noncovalent systems in the S22, HSG, HBC6, NBC10, and S66 databases were recalculated employing this new scheme. The consistent and tight settings of the truncation parameters for DLPNO-CCSD(T) and DLPNO-MP2 in this noncanonical CCSD(T)/CBS calculations lead to the maximum absolute deviation and root-mean-square deviation from the canonical CCSD(T)/CBS interaction energies of less than or equal to 0.28 kcal/mol and 0.09 kcal/mol, respectively. The high accuracy and low cost of this new computational scheme make it an excellent candidate for the study of large noncovalent systems.     

可快速计算水团簇三体作用强度的新方法

将水分子视为由2个O—H键偶极构成, 再将水分子间的三体作用视为长程诱导作用和短程校正之和, 使用Thole模型计算长程诱导作用, 通过同时考虑不同水分子间的置换和同一个水分子中2个键偶极间的置换计算短程校正, 从而提出了一个可快速计算水团簇三体作用强度的新方法. 根据已报道的12347个水三聚体的结构和CCSD(T)三体作用能, 确定了该方法所需参数. 将该方法和所确定的参数应用于67个水团簇体系, 计算这些体系的三体作用能, 并与CCSD(T), MP2, M06-2X方法的计算结果进行比较. 结果表明, 相对于CCSD(T)方法的总三体作用能, 本文方法的均方根偏差(RMSD)仅为3.32 kJ/mol, 平均相对偏差(MRD)仅为2.43%; 对较大水团簇体系, 该方法计算精度稍优于MP2方法, 明显优于M06-2X方法, 并且更快捷高效.     

Many-body decomposition of the binding energies for OH.(H2O)2 and OH.(H2O)3 complexes

We use ab initio electronic structure methods to calculate the many-body decomposition of the binding energies of the OH.(H2O)n (n=2,3) complexes. We employ MP2 and CCSD(T) levels of theory with aug-cc-pVDZ and aug-cc-pVTZ basis sets and analyze the significance of the nonpairwise interactions between OH radical and the surrounding water molecules. We also evaluate the accuracy of our newly developed potential function, the modified Thole-type model, for predicting the many-body terms in these complexes. Our analysis of the many-body contributions to the OH.(H2O)n binding energies clearly shows that they are just as important in the OH interactions with water as they are for interactions in pure water systems.