Preparation of W1/O/W2 emulsion to limit the diffusion of Fe3+ in the Fricke gel 3D dosimeter

The irradiation of tumors in radiotherapy requires accurate 3D dosimetry. The Fricke 3D dosimeters, which were considered to be high potential of application in 3D dosimetry, suffer from a reduced temporal integrity of dose distribution caused by Fe³⁺ ions diffusion. To overcome the drawback, we firstly synthesized a kind of amphiphilic molecules with critical micelle concentration of 0.45 g/L and hydrophile‐lipophile balance value of 10, then prepared multiple emulsions by self‐assembling those molecules in Fricke solution under liquid paraffin, and finally obtained Fricke hydrogel embedded with the multiple emulsions. The diffusion coefficient of Fe³⁺ ions in the embedded Fricke hydrogel was measured to be 0.17 mm²/h. The hydrogel dosimeter exhibits considerable potential for use in dose verification applications.     

Suspension polymerization of poly(ethylene glycol) methacrylate: a route for swellable spherical gel beads with controlled hydrophilicity and functionality

 Spherical and swellable gel beads were obtained by the suspension polymerization of poly(ethylene glycol) methacrylate macromonomer (PEG-MA). The average size and size distribution properties, the equilibrium swelling behaviour and the protein adsorption characteristics of PEG-MA-based gel beads were determined. In the suspension polymerization system, the organic phase including monomer, cross-linker and diluent solution was dispersed in an aqueous medium by using poly(vinylpyrrolidone) as the stabilizer. The diluent solution was prepared by mixing cyclohexanol and octanol at different volume ratios. The suspension polymerization experiments were designed in two separate parts. In the first part, ethylene glycol dimethacrylate was selected as the cross-linker and swellable PEG-MA-based gel beads were obtained by changing the cross-linker concentration, the monomer/diluent ratio and the stirring rate. In the second part, a more hydrophobic structure, divinylbenzene (DVB) was tried as a cross-linker. In this part, PEG-MA-DVB copolymer beads were obtained by changing the DVB/PEG-MA feed ratio. Then, the hydrophicility of the resulting gel beads could be controlled by changing the feed ratio of hydrophilic macromonomer to hydrophobic cross-linker. This property was also used to control the extent of nonspecific protein adsorption onto the surface of the gel beads. The non specific albumin adsorption onto the gel beads decreased with increasing PEG-MA content. No significant nonspecific adsorption at the isoelectric point of albumin was detected onto the gel beads produced with the higher PEG-MA/DVB feed ratios. For specific albumin adsorption, a triazinyl dye (i.e., cibacron blue, CB F3G-A) was covalently attached onto the surface of the copolymer beads via terminal hydroxyl groups of PEG-MA. The results of albumin adsorption experiments with the CB F3G-A carrying beads indicated that an appreciable specific albumin adsorption capacity could be obtained with the gel beads produced with a PEG-MA/DVB feed ratio of 1.5/4.0. Received: 16 August 1999/Revised: 27 December 1999     

Microencapsulation of protein‐loaded polysaccharide particles within poly(D,L‐lactic‐co‐glycolic acid) microspheres using S/O/W: characterization and release studies

This report demonstrates a process to form polysaccharide glassy particles without water–oil or water–air interfaces as well as ionic polymers and its application in formulating sustained‐release dosage forms for structurally delicate proteins. When a co‐solution containing dextran and polyethylene glycol (PEG) was subjected to freeze‐drying, the dextran separated out of the solution to form dispersed phases surrounded by a PEG‐rich continuous phase and was solidified during subsequent lyophilization to fine glassy particles, 1–2 µm in diameter. Water‐soluble proteins can easily be loaded in these glassy particles due to preferential partition and become resistant to organic solvents simply by adding them into the dextran‐PEG co‐solution. After washing away the PEG continuous phase with organic solvents, the protein‐containing glassy particles can be suspended in a hydrophobic polymer solution and formulated into various pharmaceutical dosage forms and medical devices for sustained‐release protein delivery. In the present study, myoglobin, bovine serum albumin (BSA), and β‐galactosidase (β‐gal) were formulated in PLGA mcirospheres and as model proteins using this glassy particulate approach, and subjected to a series of assays for release kinetics, structural integrity, and bioactivity. The experimental results indicated that this system offered well preserved protein integrity and bioactivity as well as significantly improved protein release kinetics. Copyright © 2008 John Wiley & Sons, Ltd.     

Efficient synthesis of 4（3H）-quinazolinones using a soluble polymeric support

4（3H）-Quinazolinones have been synthesized from poly（ethylene glycol） （PEG） supported aza-Wittig reaction. 2-Dialkylamino- 4（3H）-quinazolinones 6 were synthesized efficiently by reaction of secondary amine with PEG-supported carbodiimides 4, which were obtained from aza-Wittig reaction of PEG-supported iminophosphoranes 3 with isocyanates.     

The effect of an anionic surfactant on the rheology and stability of high volume fraction O/W emulsion stabilized by PVA

The effect of the addition of an anionic surfactant (sodium dodecyl benzene sulphonate) on the rheology and storage stability of concentrated O/W emulsions stabilized by poly (vinyl alcohol) is reported. It was found that the surfactant markedly reduced the magnitudes of the storage modulii of the emulsions. This could be attributed to a reduction in the interfacial tension resulting from the formation of polyelectrolyte type complexes between the PVA and NaDBS at the O/W interface. The results were compared to the equation (given by Princen) relating concentrated emulsion rheology to the interfacial tension and droplet size. Reasonable agreement was found, though there was a small difference in the constants in the equation given by Princen and those found here. The agreement suggested that the emulsions were deforming above a critical volume fraction and that the rheological properties were dominated by the dilation of the interface during shear. Microelectrophoresis measurements showed that the addition of the surfactant conferred a charge onto the PVA stabilized droplets as a result of the formation of the polyelectrolyte complex. The NaDBS was found to reduce the long-term stability of the emulsions compared to emulsions containing PVA alone.     

An improved interfacial coacervation technique to fabricate biodegradable nanocapsules of an aqueous peptide solution from polylactide and its block copolymers with poly(ethylene glycol)

ABA block copolymers of polylactide and poly(ethylene glycol) as amphiphilic bioabsorbable polymers were synthesized by the ring-opening polymerization of dl- lactide onto poly(ethylene glycol) (PEG 2000 or PEG 6000) and their structures were characterized on the basis of proton NMR. Biodegradable nanocapsules of an aqueous insulin solution were prepared from the block copolymers and polylactide by an improved interfacial coacervation technique. The results showed that the diameters of the nanocapsules were mainly dependent on the ratio of the two chains in the block polymers. The size of the nanocapsules decreased with an increase in the amount of surfactant used. More insulin solution resulted in an enlargement of the nanocapsules in diameter. In an optimum condition, biodegradable nanocapsules could be achieved with a size around 250 nm with a narrow distribution. The encapsulation percentages of insulin were larger in the nanocapsules from the PEG 2000 copolymers than in those from the PEG 6000 analogs and changed with the ratios of the blocks in the block copolymers. Received: 17 July 2000 Accepted: 24 November 2000     

One Pot Synthesis of Surface PEGylated Core–Shell Microparticles by Suspension Polymerization with Surface Enrichment of Biotin/Avidin Conjugation

Core–shell microparticles that consist of poly(vinyl neodecanoate) (VND) crosslinked with poly(ethylene glycol dimethacrylate) (EGDMA) as the core and poly(ethylene glycol methacrylate) (PEGMA) ( = 360 or = 526 g · mol^?1) as the shell have been synthesized using suspension polymerization by a conventional free radical polymerization process. Interfacial tension and stability tests show that PEGMA acts as an amphiphilic macromonomer and is located on the oil/water interface of the suspension system, thus forming an outer layer during the polymerization. Kinetic studies of the monomers' conversion of VND, EGDMA, and PEGMA have been carried out using ¹H NMR spectroscopy. EGDMA and PEGMA were found to have faster reaction rates compared to VND. Moreover, scanning electron microscopy showed that the polymerization of these particles starts from the shell and finishes towards the core. Consequently, the resulting microsphere is found to have a multi‐layer structure. Biotin was covalently bound to the surface by the PEGMA hydroxy groups. Conjugation of biotin with streptavidin PE (phycoerythrin) was subsequently carried out. Confocal microscopy was used to confirm the presence of fluorescing streptavidin. The amount of avidin conjugated to the microspheres was calculated by the release of a 2‐(4‐hydroxyphenylazo)benzoic acid/avidin complex using UV/vis spectroscopy. One avidin molecule was found to occupy 7 nm² on the surface of the microspheres.

     

Preparation of high density polyethylene/polyethylene-block-poly(ethylene glycol) copolymer blend porous membranes via thermally induced phase separation process and their properties

<正>High density polyethylene(HDPE)/polyethylene-block-poly(ethylene glycol)(PE-b-PEG) blend porous membranes were prepared via thermally induced phase separation(TIPS) process using diphenyl ether(DPE) as diluent.The phase diagrams of HDPE/PE-b-PEG/DPE systems were determined by optical microscopy and differential scanning calorimetry(DSC).By varying the content of PE-b-PEG,the effects of PE-b-PEG copolymer on morphology and crystalline structure of membranes were studied by scanning electron microscopy(SEM) and wide angle X-ray diffraction(WAXD). The chemical compositions of whole membranes and surface layers were characterized by elementary analysis,Fourier transform infrared spectroscopy-attenuated total reflection(FTIR-ATR) and X-ray photoelectron spectroscopy(XPS).Water contact angle,static protein adsorption and water flux experiments were used to evaluate the hydrophilicity,antifouling and water permeation properties of the membranes.It was found that the addition of PE-b-PEG increased the pore size of the obtained blend membranes.In the investigated range of PE-b-PEG content,the PEG blocks could not aggregate into obviously separated domains in membrane matrix.More importantly,PE-b-PEG could not only be retained stably in the membrane matrix during membrane formation,but also enrich at the membrane surface layer.Such stability and surface enrichment of PE-b-PEG endowed the blend membranes with improved hydrophilicity,protein absorption resistance and water permeation properties,which would be substantially beneficial to HDPE membranes for water treatment application.     

A multidimensional high performance liquid chromatography method coupled with amperometric detection using a boron-doped diamond electrode for the simultaneous determination of sulfamethoxazole and trimethoprim in bovine milk

The development and validation of a multidimensional HPLC method using an on-line clean-up column coupled with amperometric detection employing a boron-doped diamond (BDD) electrode for the simultaneous determination of sulfamethoxazole (SMX) and trimethoprim (TMP) in bovine milk are presented. Aliquots of pre-prepared skim-milk samples were directly injected into a RAM octyl-BSA column in order to remove proteins that otherwise would interfere with milk analysis. After exclusion of the milk proteins, SMX and TMP were transferred to the analytical column (an octyl column) and the separation of the compounds from one another and from other endogenous milk components was achieved. SMX and TMP were detected amperometrically at 1.25 V vs. Ag/AgCl (3.0 mol L⁻¹ KCl). Results with good linearity in the concentration ranges 50-800 and 25-400 μg L⁻¹ for SMX and TMP, respectively, were obtained and no fouling of the BDD electrode was observed within the experimental period of several hours. The intra- and inter-assay coefficients of variation were less than 10% for both drugs and the obtained LOD values for SMX and TMP were 25.0 and 15.0 μg L⁻¹, respectively.     

Facile fabrication of a novel high performance CO2 separation membrane: Immobilization of poly(amidoamine) dendrimers in poly(ethylene glycol) networks

Poly(amidoamine) (PAMAM) dendrimers showed high CO₂ separation properties and were successfully immobilized in a poly(ethylene glycol) (PEG) network upon photopolymerization of PEG dimethacrylate. The PAMAM dendrimer incorporation ratio was readily controlled, and a stable self-standing membrane containing up to 75 wt.% PAMAM dendrimer was obtained. The CO₂ separation properties over smaller H₂ were investigated by changing the PAMAM dendrimer content or generation and CO₂ partial pressure (ΔPCO₂$\mathrm{\Delta }{P}_{\text{C}{\text{O}}_2}$) under atmospheric conditions. Especially, a polymeric membrane containing 50 wt.% PAMAM dendrimer (0th generation) exhibited an excellent CO₂/H₂ selectivity of 500 with CO₂ permeability of 2.74 × 10⁻¹⁴ m³(STP)m/(m² s Pa) or 3.65 × 10³ barrer (1 barrer = 7.5 × 10⁻¹⁸ m³(STP)m/(m² s Pa)) when a mixture gas (CO₂/H₂: 5/95 by vol.) was fed at 25 °C and 100 kPa with 80% relative humidity. This polymeric materials are promising for a novel CO₂ separation membrane.     

Mechanism of high thermal stability of commercial polyesters and polyethers conjugated with bio‐based caffeic acid

In previous report, we discovered that a novel improvement technique to enhance the thermal properties of poly(L ‐lactide)s (PLLAs) by terminal conjugation with 3,4‐diacetoxycinnamic acid (DACA). In this study, we clarified the mechanism of the enhancement of thermal stability by using commercial polyesters and polyethers. The effect of thermal improvement by the terminal conjugation of DACA on poly(DL ‐lactide), poly(ε‐caprolactone), and poly(ethylene glycol) was almost the same as about 100 °C increase. The amount of residual tin catalyst, which enhances the thermal degradation of polyesters, was reduced at undetected level after the terminal conjugation of DACA probably due to the removal of tin during DACA conjugation process. Furthermore, the π‐π stacking interactions of DACA units and the chemical protection of terminal hydroxyl groups, which enhances intramolecular scission, were also important for the high thermal stability. We clarified that the extreme high thermal stability by DACA conjugation was induced by these above mechanisms. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Crystal structure and interaction with bovine serum albumin of the Cu(I/II) complex [C20H32Cu2I3N4] n

[C₂₀H₃₂Cu₂I₃N₄] _n was synthesized and characterized by elemental analysis, ESI-MS spectrometry, and IR spectra. The crystal structure was determined by X-ray single-crystal diffraction. The binding of the complex with bovine serum albumin (BSA) was studied by fluorescence spectroscopy under simulated physiological conditions. The binding constant (K _b), the number of binding sites (n), and the corresponding thermodynamic parameters ΔH, ΔS, ΔG were calculated based on the van’t Hoff equation. The complex had strong ability to quench the fluorescence from BSA, and the quenching mechanism of this complex to BSA was static quenching. Hydrogen bonds and van der Waals forces are the interactions between the Cu(I/II) complex and BSA. According to the Förster non-radiation energy transfer theory, the binding average distance between the donor (BSA) and the acceptor (Cu(I/II) complex) was obtained. The effect of the complex on the BSA conformation was also studied by using synchronous fluorescence spectroscopy.     

Purification of compounds from Lignum Dalbergia Odorifera using two-dimensional preparative chromatography with Click oligo (ethylene glycol) and C18 column

Purification of compounds from traditional Chinese medicines (TCMs) is an important task for understanding the chemical composition of TCMs. However, it is difficult to obtain compounds with high enough purity for identification by NMR due to the complexity of TCMs in chemical composition. In this study, a two‐dimensional purification method based on a Click oligo (ethylene glycol) column and a C18 column was developed to realize an orthogonal separation in preparative level for purifying compounds efficiently. The first dimensional preparation was performed on a Click oligo (ethylene glycol) column to simplify the sample into the fractions with good separation repeatability. On the first dimension, 7.2 g sample was separated into 11 fractions with a recovery of 86% within 6 h. A C18 column was taken as the second dimension to realize the high‐performance separation and rapid preparation from the fractions collected from the first dimension. Eight compounds in fraction 6 and 2 compounds in fraction 8 were isolated and identified after optimizing the separation and collection parameters. This method is a high‐efficient and orthogonal preparation method to improve the separation of a complex sample and increase the purity of the compounds, which benefits from the application of novel materials in the preparation and purification.     

Synthesis, luminescence properties of a novel aromatic carboxylic acid (L) and corresponding Eu(III) and Tb(III) compounds as well as the binding characteristics of L with bovine serum albumin (BSA)

A novel polyamino polycarboxylic pyridine derivative ligand, N,N,N¹,N¹-(2,6-bis((3-(aminoethyl)-5-methyl-1H-pyrazol-1-yl)methyl)pyridine)hexakis(acetic acid) (L), was designed and synthesized with the motive that it is able to sensitize the emission of lanthanides. Its corresponding Eu(III) and Tb(III) complexes Na₄EuLCl₃·3H₂O and Na₄TbLCl₃·5H₂O were successfully prepared. The ligand and the complexes were characterized by elemental analysis, IR, MS, NMR and TG-DTA. The luminescence properties of the compounds in solid state were investigated; each complex had very narrow emission bands and strong luminescence intensity up to about 10,000. The TG-DTA studies showed that the initial decomposition temperature of both complexes was over 250 °C, elucidating the complexes had a high thermal stability. Meanwhile, the comparison with similar complexes suggested that the ligand with more coordination sites possessed more efficient antenna effect. To explore the potential medicinal value of L, the binding interaction of L and bovine serum albumin (BSA) was carried out by fluorescence spectrum. The studies indicated that the reaction between L and BSA was a static quenching procedure. The binding site number n and binding constant Ka were calculated according to the double logarithm regression equation. The thermodynamic parameters showed the Van der Waals and hydrogen bond interactions were the mainly impulse to the reaction.     

Novel materials for bioanalytical and biomedical applications: Environmental response and binding/release capabilities of amphiphilic hydrogels with shape‐persistent dendritic junctions

The binding and release capabilities of a hydrogel series, constructed of hydrophilic poly(ethylene glycol) segments and hydrophobic dendritic junctions [poly (benzyl ether)s], are evaluated in aqueous media. The environmental response of the amphiphilic networks is also tested in water at three pH values: 1.5, 7.0, and 10.1. The highest swelling ratio is observed under acidic conditions and varies between 3.7 and 6.5, depending on the crosslinking density and dendrimer generation. Gel specimens with embedded indicators react within 3–6 s with a clear color switch to the change in the pH of the surrounding medium. The experiments with model anionic and cationic indicators and stains show that the hydrogels have basic interiors. The gel binding capabilities depend on the water solubility of the substrate and on the size of the incorporated dendritic fragments. Model release studies have been performed at 37 °C and pHs 1.5, 7.0, and 10.1. The observed phenomena are explained by the transformations in the structure and charge that both the networks and the model compounds undergo with the changes in the pH of the aqueous medium. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4017–4029, 2005     

Preparation of polybenzidine submicrorods with controllable morphology using poly (ethylene oxide)-b-polystyrene as a template and its electrochemical properties

Polybenzidine (PBz) particles were formed by the chemical polymerization in micelles of block copolymer by using Poly (ethylene oxide)-b-Polystyrene [PEO₁₁₃-b-PS_x (x = 50, 58 and 100)] as templates. The samples were characterized by IR, UV-vis absorption spectroscopy, transmission electron microscopy, cyclic voltammetry, constant current charge-discharge and electrochemical impedance to determine their morphologies and electrochemical properties. The results show that the prepared PBz is submicron to nanometer rod-like conducting particles with uniform sizes. Removing the templates did not affect the morphology but slightly reduced the size of the PBz particles. The size and morphology of PBz particles can be tuned by adjusting the amount of monomer. The PBz submicrorods showed 412 F·g^?1 specific capacitance in 0.3 mol·L^?1HClO₄ at the current density of 1 A·g^?1, indicating its better electrochemical activity. The specific capacitance of the PBz particles reduced less than 10% after 500 charge-discharge cycles at the current density of 3 A·g^?1, indicating its good cycling stability.     

Metal framework as a novel approach for the fabrication of electric double layer capacitor device with high energy density using plasticized Poly(vinyl alcohol): Ammonium thiocyanate based polymer electrolyte

High performance electric double-layer capacitors (EDLCs) based on poly (vinyl alcohol) (PVA): ammonium thiocyanate (NH₄SCN):Cu(II)-complex plasticized with glycerol (GLY) have been fabricated. The maximum DC ionic conductivity (σ_DC) of 2.25 × 10^-3 S cm⁻¹ is achieved at ambient temperature. The X-ray diffraction (XRD) patterns confirmed that the addition of both Cu(II)–complex and GLY enhanced the amorphous region within the samples. Through the Fourier transform infrared (FTIR) the interactions between the host polymer and other components of the prepared electrolyte are observed. The FESEM images reveal that the surface morphology of the samples showed a uniform smooth surface at high GLY concentration. This is in good agreement with the XRD and FTIR results. Transference numbers of ion (t_ion) and electron (t_el) for the highest conducting composite polymer electrolyte (CPE) are recognized to be 0.971 and 0.029, respectively. The linear sweep voltammetry (LSV) revealed that the electrochemical stability window for the CPE is 2.15 V. These high values of t_ion and potential stability established the suitability of the synthesized systems for EDLC application. Cyclic voltammetry (CV) offered nearly rectangular shape with the lack of Faradaic peak. The specific capacitance and energy density of the EDLC are nearly constant within 1000 cycles at a current density of 0.5 mA/cm² with average of 155.322F/g and 17.473 Wh/Kg, respectively. The energy density of the EDLC in the current work is in the range of battery specific energy. The EDLC performance was found to be stable over 1000 cycles. The low value of equivalent series resistance reveals that the EDLC has good electrolyte-electrode contact. The EDLC exhibited the initial high power density of 4.960 × 10³ W/Kg.     

A theory study based on DFT/TD-DFT for a series of Ir(III) complexes with the low-efficiency roll-off and the high-inter-system crossover rate properties

This study employs density functional theory (DFT) and time-dependent density functional theory (TD-DFT) to investigate a series of cyclometallated Ir(III) complexes for their application as OLED light-emitting materials, including (dtp)₂Ir(dpm), (mmpyp)₂Ir(dpm), (dtp)₂Ir(tpip), (mmpyp)₂Ir(tpip), (dtp)₂Ir(pic), and (mmpyp)₂Ir(pic). Their geometries, frontier molecular orbital properties, ionization potential, electron affinity, absorption and emission spectra, and spin-orbit coupling properties have been analyzed respectively. Through comparison, we have identified complexes with reduced efficiency roll-off and enhanced k_ISC.     

Simultaneous determination of Zr(IV) and Hf(IV) by CE using precolumn complexation with a [PW(11)O(39)](7-) ligand

A CE method was developed for the simultaneous determination of Zr(IV) and Hf(IV) at trace levels. A lacunary Keggin-type [PW(11)O(39)](7-) ligand reacted quantitatively with a mixture of trace amounts of Zr(IV) and Hf(IV) to form the so-called ternary Keggin-type anions [P(Zr(IV)W(11))O(40)](5-) and [P(Hf(IV)W(11))O(40)](5-) in 0.010 M monochloroacetate buffer (pH 2.2). Since both ternary anions possessed different electrophoretic mobilities and high molar absorptivities in the UV region, Zr(IV) and Hf(IV) were determined simultaneously with direct UV detection at 258 nm. Each peak height was linearly dependent on the concentration of Zr(IV) or Hf(IV) in the range of 5.0x10(-7)-1.0x10(-5) M; a detection limit of 2x10(-7) M was achieved. The utility of the proposed CE method was demonstrated for the simultaneous determination of Zr(IV) and Hf(IV) in natural water samples with satisfactory results.